MS-6378 Ver 3

I have the above stated motherbiard, I need to find out how to hook up the power plugs(from the tower) to the mainboard, I have tried to download the manual, but no such luck. There is no indication on the pins to direct which is pw, reset hdd, ect ect, doses anyone know how or could supply with a picture of the manual setup?

here the link for the MB
MS-6378

Similar Messages

Ms 6378 ver 3.0 or what / lock up Athlon XP 1800

:O
I too have a MS-6378 notherboard. Version 3.0. I am running a Athlon 1800 XP with 256 MB ram. I have a problem that my computer lockup everyonce in a while. Sometimes I could be surfing the net or the next just typing a letter on word. I know I can not play any games because that is a automatic lock up. I tried to uninstall the on board graphics and install my Nvida TNT 64 Pro. No way computer lock up on boot up. For those of you thast are having video problems, can you see the first screen at all. If you can make sure you go in to your bios and change the video to AGP. Yes I know that you don't have a AGP slot but MSI considers that on board video junk a AGP graphics card, I guess. Any way MSI says on their page realease for the ms-6378 that only Version 2.1 supports Athlon 1800 XP cpu's. My book says the one I have does. What gives?????? I amn tired of frequent lock ups. I has nothing to do with heat. It can lock on boot up or sometimes after 12 hours of sitting here. SOme please help me. If anyone needs help let me know. May I hqave been through that as well and can help.

Hey buddy, I have a similiar problem with my computer. What happens is that my CPU overheats extremely bad and locks up. I don't know what's happening. My computer is a MSI board, not sure which since I sold it already with a T-Bird 800. It say in the bios that the heat is as high as 55 C or 110 F. I been using my system for 2 years now (sometimes I leave it on 24/7), and it just suddenly happened one day. I know it doesn't have anything to do with my CPU or FAN, cause I replaced both of those (I also use termal grease). I was using Windows XP, than I switched back to Windows 98 SE, same thing happen. Sometimes I just want to boot up and it will lock up. I would format and it would lock up half way too. If anyone knows whats happened to my computer, please let me know! Thanks.

Please help me with scsi HD Problem

Please help me with scsi HD Problem.
Hi for the life of me I cant resolve this.
I have a ms-6378 ver.3 board with 1.1g AMD
i could not install windows 2000 on a Seagate 73Gig 68 pin SCSI Drive ultra wid. after giveing up i added a IDE HD and install win2k SP2 and added the SCSI card all still worked ok
but as soon as i added the hardrive it locks up and it will
not compleat the load of win2k and tried a smoler drive 18Gig 68 pin SCSI Drive. but it will not load windows 2000. i am stumpt. ;(

It sounds like an IRQ conflict. Make sure you diable the primary and secondary channels for the IDE ports to free up the IRQ resources for the SCSI drives. If you are using a separate SCSI controller, make sure it is in the proper PCI slot and does not share IRQ's with other cards.

Switched CPU now MOBO doesn't Boot

I have an MSI 6378 Ver 3 Mobo. Up until this afternoon it worked great. It was running an XP1800+ CPU. I had someone at work who upgraded and gave me their XP2000+ cpu, so I figured, what the hell. I installed it, but the system would suddenly power down when it started to boot into windows. I would then have to remove all power from the system (disconnect the cord) before I could power it up. So I figured I got a bum CPU and put the old one in. With the old CPU the monitor won't come on, so I don't even know if it is getting to post or not. It sounds like things are spinning up, but I don't have any display. I have a seperate PCI video card, and I get a display with the bad CPU. Can anyone give me some suggestions what I did to my board? I really don't want to purchase a new board/CPU/memory combo if I can avoid it.
Thanks,
Lee

Hello,
You know that you only need a thin layer on the CPU DIE (thinner than paper).
And a small layer on the heatsink.
What heatsink are you using?
Why the XP1800+ wont post?
When you put the XP2000+ in the board runs the CPU at 1.667Ghz.
If you swap CPU's the board may try to run the XP1800+ at 1.667Ghz instead of 1.5Ghz and with the locked CPU's it will cause the PC not to POST.
So you should clear the cmos everytime you change CPU's.
What other components are you using and power supply?
Are you running the CPU at the correct speeds?

Onboard video trouble

i'm really really confused about my old ms 6378 ver 3 m/board. i'm planning to buy a pci video card but i heard the onboard video can't be turned off. i also heard that msi boards are designed to automatically turn off the onboard video.. but is it really possible to use it on my board?? if it's possible, what's the limit of video ram it can support and how do i change those bios settings?? plzz help...
my pc specs:
ms-6378 v3
duron 1.1gHz
128 ram
350w psu
win2k pro

Some info from my previous post:
The problem you are experiencing could trace back to a video card design defect with version three of the board in combination with Windows XP and all of the drivers to date. The only solution is to send back the board to MSI and request a different model. The model MS-6738-010 has an AGP slot with similar specs. I just sent back the same board experiencing the same problems. It is being widely reported on the web also. Microsoft support has already investigated numerous crash reports from many people with the same problem. It all comes down to a video card problem in combination with the drivers for the board.
MSI currently has no fix for the problem on this board. Your only choice is to send it back and request another board.
See the following info:
Microsoft Knowledge Base Article - 293078M
Error message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
View products that this article applies to.
This article was previously published under Q293078
SYMPTOMS
You may receive one of the following Stop error messages:
STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
STOP: 0x100000EA THREAD_STUCK_IN_DEVICE_DRIVER_M
CAUSE
This issue may occur if the display driver is caught in an infinite loop while it waits for the video hardware to become idle. This issue typically indicates a problem with the video hardware or that the display driver cannot program the hardware correctly.
RESOLUTION
To resolve this issue, obtain and install the most current driver for your video adapter, or replace your video card.
WORKAROUND
To work around this issue, follow these steps:
1.   Click Start, click Control Panel, and then double-click Display.
2.   On the Settings tab, click Advanced, and then click the Troubleshoot tab.
3.   Move the Hardware Acceleration slider to None, and then clear the Enable Write Combining check box.
4.   Click OK, and then click OK.
Note This procedure prevents the display driver from programming the hardware incorrectly, but you may lose some display functionality and performance. Although you can increase the hardware acceleration settings higher than None to regain functionality and performance, these settings increase the chance that the issue will occur again. For maximum stability, leave hardware acceleration off.
MORE INFORMATION
This Stop error message may also occur in video adapter drivers that do not represent a physical device. For example, this Stop error message may occur in the virtual video adapter driver that is used by Symantec PCAnywhere. If PCAnywhere is installed on a computer where this error message occurs, visit the Symantec Web site to determine if there are any available fixes for your version of PCAnywhere.
The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.
The information in this article applies to:
    Microsoft Windows XP Professional
    Microsoft Windows XP Home Edition
    Microsoft Windows XP 64-Bit Edition
Error Caused by Graphics Device Driver
Thank you for submitting an error report. Unfortunately, we cannot provide you with specific information about how to resolve this problem at this time. The information that you and other users submit will be used to investigate this problem.
Analysis
A device driver installed on your system caused the problem, but we cannot determine the precise cause.
Getting Help
Depending on which situation is applicable to you, do one of the following:
•   If you are running Windows Server 2003 you may experience crashes if you have adjusted the Hardware Acceleration setting. Microsoft recommends that the Hardware Acceleration setting be set to None for server systems. To check your Hardware Acceleration setting, go to the advanced section of the display properties dialog box.
•   If you know the manufacturer of the device, contact the manufacturer's product support service for assistance.
•   If you don't know the driver's manufacturer and need help diagnosing and resolving this problem, contact your computer manufacturer's product support service.
•   Updated drivers might be available on the Microsoft Windows Update Web site. At Windows Update, you can have your computer scanned and, if there are updated drivers available, Windows Update will offer a selection of drivers that you might be able to use. To learn more about updated drivers that might be available, visit Microsoft Windows Update.
•   For information about Microsoft support options, visit Microsoft Product Support Services.
You can track this error report by clicking the Track this error report link. If you choose to track your error report, you will be notified of resolutions to this problem as they are identified.
Track this error report
Additional Technical Information
•   Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078)

New bios 6390,6378

Award® BIOS File Size 273KB
Version 2.2 Update date 2003-1-22
Update Description -Fixed system hang if there is no disk in USB Zip drive
-Fixed USB2.0 device will change to USB1.1 after resume from S4 under WinXP
-Fixed chassis intrusion function not working
Special note For PCB 2.0 Only,
Download 6390v22.exe
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=80&NAME=MS-6390
Award® BIOS File Size 262KB
Version 3.3 Update date 2003-1-16
Update Description Fixed some system unstable when using green color Athlon XP CPU
Special note This BIOS is only for MS-6378 PCB ver.3,
Download 6378v33.exe
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=22&NAME=MS-6378

Reflash to the previous version.On your drivers page, beside the BIOS update there should be a link to 'Previous versions'.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

A versão 36.0.1 do firefox não quer definir o mesmo como navegador padrão apesar de ter sequido todas as instruções como posso proceder ??

atualizei o firefox para a versão atual e através da versão antiga não quis atualizar seguindo as instruções desinstalei o navegador e baixei e instalei a versão 36.0.1 disponível apesar de escolher a opção de torna lo navegador padrão na instalação ele informa na aba geral das opções que o firefox não é meu navegador padrão segui todas as instruções disponíveis para isso e não consegui efeito nem pelo painel de controle do windows o que posso fazer ??? agradeço pela atenção e a ajuda em solucionar este problema que é a primeira vez que acontece em três anos de utilização do firefox meu navegador favorito..

Olá, também tivesse esse problema, ou foi mais ou menos assim.
Limpe os rastros do navegador em seu PC, vá em %appdata%, e exclua a pasta "Mozilla", passe um CCleaner na máquina também pra ver se da algo.
Boa sorte cara...

ITune ver 9 problem with potcasts in my playlists

On previous versions of iTune I entered podcasts into my playlists and was able to sync them to my Nano. I upgraded to ver.9. In iTunes i still can enter the podcasts into my playlist but when I sync my Nano these playlists do no longer include the podcasts. What changed? The podcast do however show up under the podcast menu as on previous versions of iTunes.

It isn't just happening to Nano users. I have a Classic and I'm having the same problem. It isn't an iPod problem, it is an iTunes problem. If you go into the iPod-->Music panel and Click "Selected playlists, artists, and genres" you can see that any play list that contains ONLY podcasts will not appear in the list.

I have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks

Adobe Photoshop Lightroom has encountered a problem and needs to close. (ver 1.4.1)

I completed a search for this problem here and other forums, and found very useful information, however, I still need help. My laptop is an HP Pavillion dv1000, Intel Centrino, Windows XP, 1.24G of RAM; Camera is a Canon 5D, shooting JPEG only.
After a couple of weeks enjoying a vacation in the Caribbean, it was time to load all the new pics in the computer. I removed the card from my camera and using windows explorer, downloaded all pics in MyPictures folder. I created a new folder for this trip, and while I was there, I decided to reorganize several folders from previous trips. I renamed and moved folders around, deleted pictures, etc. (I believe that all the changes that I made created my problem.)
Once I finished all the changes with my folders, I launched Lightroom (ver 1.4.1) with the idea of synchronizing the folders and start working on my new pictures. After apx 8 seconds, I got the message: Adobe Photoshop Lightroom has encountered a problem and needs to close. We are sorry for the inconvenience.
After a google search, I found a lot of potential answers to my problem, including this one, which I tried:
"It might also be worth trying a temporary test catalog, just to see whether it's specific to that catalog. To do so, go to File menu > New Catalog and create a new catalog somewhere easy - Desktop perhaps - and just try importing a few photos into that test catalog and see if you can get it to freeze. I'm wondering if the catalog's been damaged slightly by that initial unexpected close, and if so, we'll see if we can get that sorted out for you."
I did exactly that (created a test catalog) and I don't get the error. I am not clear on what does that mean. Could you help me understand it? What do I need to do to use my old catalog? Is it damaged? How can I fix it? Did I loose all the work that I did in my previous pictures?
If I go back to my original catalog, I still get the error.
Thank you in advanced for your assistance.
Tony

Tony,
Here's something you might try:
Create a new, empty catalogue and try File->Import from catalog... and specify your broken one as input. With luck the damage will be left behind.
If that doesn't work, try deleting or renaming your preferences file. Look here for its location.
And if that doesn't work, try deleting or renaming your presets folder. See that same website for details.
Let us know how you make out.
Hal

Firefox não está atualizando para a última versão

Olá, bom dia.
Uso o Firefox 34.0. Eu vi que saiu uma versão mais nova, 34.0.5. O problema é que meu Firefox não quer atualizar de jeito nenhum para essa versão com o .5 no final, indo naquela parte onde verifica se tem atualização (opção sobre o Firefox). E até o próprio site da Mozilla detecta que estou usando a versão mais recente possível. Mas se for fazer download no site da Mozilla mesmo, a versão que vai baixar é justamente a que tem o .5 no final.
Enfim, por que meu Firefox não atualiza de jeito nenhum para essa última versão? Terei de fazer a instalação manualmente para atualizá-lo? Só gostaria de saber isso mesmo, obrigado.

''Marco Aurélio [[#answer-674222|said]]''
<blockquote>
Consulte o artigo, "[[How to fix the Update Failed error message when updating Firefox]]" para saber como resolver esse problema.
</blockquote>
Na verdade isso não me ajuda, uma vez que a verificação de atualização não retorna nenhum aviso de falha. Ele simplesmente não "enxerga" que tem uma versão mais nova, acha que a 34.0 é a mais recente que tem. Mas não traz nenhum aviso de erro, falha ou qualquer coisa do tipo.

Minha versão antiga do itunes não quer desinstalar para a nova versão ser atualizada

Atualizei meu iphone para o ios 7 que é imcompatível com a versão de itunes que eu tenho atualmente no meu computador, nas tentativas de atualizar o itunes para a versão compatível com o ios 7 sou informada que é impossível desinstalar o itunes que já tenho, já tentei desinstalar pelo paineld e controle e nada, me ajudem estou impossibilitada de transferir músicas ou fazer qualquer coisa pelo itunes. Obrigada.

Olá, também tivesse esse problema, ou foi mais ou menos assim.
Limpe os rastros do navegador em seu PC, vá em %appdata%, e exclua a pasta "Mozilla", passe um CCleaner na máquina também pra ver se da algo.
Boa sorte cara...

Atualização da versão 17 da Nota Fiscal Eletronica

Olá a todos.
Baseado na nota Note 1538854 - SAPK-10017INSLLNFE: Support Package 17 for SLL-NFE, precisamos aqui na empresa atualizar a Nota Fiscal Eletrônica para a versão 17. Na parte ABAP e XI Content tudo certo e importado com sucesso.
Tenho dúvidas quanto ao importação do arquivo SLLNFEJWS11_0-20003296.SCA. Alguém tem alguma dica de como fazer?
Desculpem a pergunta de leigo, mas o responsável por isso está de férias e ficou comigo essa atividade.
Obrigado a todos
Marcos Cristiano Ickert
Basis

Bom dia Marcos,
Nunca fiz pessoalmente, mas acho que é aqui:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/22/a7663bb3808c1fe10000000a114084/frameset.htm
Como você disse que é uma atualização, qual seu SP anterior? Só é necessário este deploy se sua versão era anterior ou igual a SP10, caso esteja entre 11 e 16 já está na "ultima".
Atenciosamente, Fernando Da Ró

NFe de devolução com referencia a Cupom Fiscal - Versão 3.10

Olá pessoal, boa tarde!
Tenho o seguinte cenário em uma instalação de IS-Retail. O sistema legado no PDV não emite notas fiscais eletrônicas para acobertar processos de devolução de vendas. Este processos, eram realizados no ECC para a versão 2.0 sem maiores problemas.
Ocorre que, com as novas validações da Sefaz, tivemos que alterar o processo para <finNFe> = 4 para continuar utilizando os CFOP´s de devolução (1411/AA, por exemplo). Com essa alteração, veio a necessidade de informar um processo referenciado, que nesse caso foi um cupom fiscal.
Para o GRC, enviamos então as seguintes informações na tabela IT_NFE_NFREF:
MOD_ECF
= 2D
N_ECF
= 999
N_COO
= 999999
Aparentemente, td bem até recebermos o seguinte retorno do GRC:
Erro durante a transformação XML: Unexpected Case in Branch, /1SAI/SAS681A693D4DAAF84E1854, 32
Nº mensagem J1B_NFE_ERP_GRC204
Depois de algum tempo, percebi não há rotina no MF /XNFE/OUTNFE_TRANSFORM, perform fill_proxy_structure para preencher o campo ls_nfref-choice-selection no cenário com ECF (dentro de: ELSEIF NOT ls_nfe_nfref-n_ecf IS INITIAL.) . Ao inserir o valor 'REF_ECF' manualmente (via debug) o XML é construído normalmente e a Sefaz aprova a emissão da NFe de devolução. A tag foi montada conforme abaixo:
<NFref>
     <refECF>
          <mod>2D</mod>
          <nECF>999</nECF>
          <nCOO>999999</nCOO>
     </refECF>
</NFref>
Estamos abrindo um chamado pois parece que faltou uma linha de código (ls_nfref-choice-selection = 'REF_ECF'. dentro da condição: ELSEIF NOT ls_nfe_nfref-n_ecf IS INITIAL.) no programa standard.
Alguem conhece alguma BADI/Exit para tratar esse essa issue no GRC?
Agradeço qq idéia,

Olá Ricardo,
Eu obtive problemas recentemente com Devolução de NF Produtor Rural e o problema era no momento da transformação do XML no GRC para envio para SEFAZ, e só foi corrigido após a aplicação do Suport Package SLL_NFE 18 veja o post abaixo talvez ajude:
Erro Devolução de NF Produtor Rural (Fornecedor)
Se for o caso check as SNOTES que estão no SP18 e talvez você encontre a SNOTE com a solução.
Abraços,

Sugestão para o campo verProc - Versão do processo de emissão da NF-e

Olá a todos !
Gostaria da opnião de todos sobre o campo Versão do processo de emissão da NF-e (verProc), parametrizado no R/3 em J_1BNFE_CUST3_4V campo VERPROC nas configurações de definição do local de negócio, filial CNPJ.
Minha dúvida é sobre a atualização para a vesão 2.0 do layout do XML, como a versão é definida no campo VERSION, tag versao, com qual informação vcs estão utilizando neste campo, já que trata-se de um campo texto ?
Pesquisando no forum, encontrei uma Thread sobre Erro de Validação - IS_NFE_HEADER-VERPROC link: Erro de Validação - IS_NFE_HEADER-VERPROC onde contem a mesma informação de exemplo utilzada aqui (SAP NFE 1.0).
Vcs estão atualizando o campo para SAP NFE 2.0, por exmplo ? Mantendo a informação antiga, pois como não foi modificada a aplicação, ou colocando alguma outra coisa ?
Creio que quanto mais gente postar uma opinião neste caso é melhor.

Bom dia a_cristovao,
Esta informação serve como identificação de produto emissor de NF-e no XML/Sefaz.
Normalmente coloca-se "SAP NFE 1.0" ou "SAP GRC NFE 1.0" ou "SAP NFE 1.0 SP16".
É mais relacionado ao produto que ao layout.
Atenciosamente, Fernando Da Ró

MS-6378 Ver 3

Similar Messages

Maybe you are looking for