Ms-6555 drivers

I have just obtained a used ms-6555 m/b. They are still available, mainly due to the legacy isa socket, and fit my needs.
Unfortunately, I can only install Windows 2000. Windows XP setup produces an error msg after the first reboot during the install.
My guess is that the bios needs an update, but I can't find any downloads.
There are downloads available for other ms-65xx boards: are they useable?
Can anyone help?
Thanks,
Joey.

Can't find such board: http://www.msi.com/service/search/?kw=ms-6555&type=product
It appears to be an >>OEM board<< which is excluded from MSI support or this forum. Bios updates would only be offered by the OEM.

Similar Messages

6555 onboard memory

Hi I am working on a project where we recently have purchased the PXI chassis with several 6555 cards. The technical support gal, although she was very nice, did not know the gory detail of some of the questions I have, so I am hoping someone on the forums here has run into these or would know who to ask.
The specs for the NI PIXe-6555 card claim 8 MB per channel.
* Is it really 8 MB per the 24 DIO channels (so 192 MB total)?
* Is this mega BYTES or BITS?
* If I have a large dataset that is more than 8 MB, is there a way to pre-load or something so that there is not a break in the datastream?
* If we have four of the 6555 cards in one chassis, how close (what is the tolerance or slop) can I get the data streams to be synch'ed at the max speed (200 MHz)?
* If I am driving data at 5V logic levels on our DUT (device under test), can I get the full 200 MHz speed? I am seeing conflicting info on this in the help files.
Thanks!
Ed

Hi Ed,
Hopefully this clears up confusion about how to write data to the generation session of an HSDIO board: How to Write Serial Data for Any Channel on a High Speed Digital I/O Board
If your data width is 1 byte, each bit corresponds to each lane. so 0000 0000 in your byte is a single sample bit for channels 0-7. To write data to independent streams at the same time, you'll have to combine the streams into the U8/16/32 format. For instance, two data lines toggling out of phase with each other on channel 0 and channel 7 looks like so:
Sample 0: 1000 0000
Sample 1: 0000 0001
Sample 2: 1000 0000
Sample 3 :0000 0001
serialized for ch 0: 0101
serialized for ch 7: 1010
If you want to drive only those two channels, while doing other independant operations on channels 1 through 6, you simply only include ch 0, 7 in your Channel List for the Generation Session through the HSDIO driver. By default, the channels not included in the channel list for generation will have their drivers disabled, and can be used for acquisition.
The memory issue here is that for generation, you still have to populate channels that are unused for generation based on the data width. Writing to two channels takes 2 bytes per sample in the above example since U16 (Data Width = 2) is the smallest for the board. This is less than if the samples were 4 bytes wide (U32, Data Width = 4), which takes double the amount of space in memory.
This KB is slightly outdated at the time of posting this, but it explains more about optimizing memory usage with HSDIO and Data Width. Ignore the 655x statements, as 655x only referred to 6551/2 boards at that time. HSDIO Data Width and Memory Allocation
So in summary, it does bitmask based on the channel list into the generation session. It also writes one word (U8/16/32) at a time, for the channels that are enabled for generation, and this does take up memory space on the onboard memory. For your case, to write 11 outputs will require a U16 at least, which is smaller than the default U32, so I would recommend changing data width to 2 for acquisition and generation to obtain the maximum amount of memory available on your device.
Kyle A.
National Instruments
High Speed Digital I/O Product Support Engineer - R&D

HP LaserJet Enterprise 500 551dn - where did the drivers go?

I go to the download page to download the drivers for this 551dn. I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server. I downloaded them from here..
<http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
when i get the file, lets say for windows 7/64bit, i choose...
HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
24 Sep 2014 21.3
I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run. the file extracts - then POOF, the installer is gone.
where did the files go? They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
I was never asked for a file save location.... ??? really? is this this basic stuff?
Where are the files? this $$$ printer is a brick until i get drivers!
Thanks!
Jason
UPDATE- I FOUND THE FILES!!
First of all, HP... i'm not impressed.
All the files for all the drivers are in a series of temp folders...
C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
really?
hope this helps someone.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

X201 Tablet: Drivers not working for Network controller on Windows 7 Pro x64

Hello,
After downloading and installing all LAN and WLAN drivers for X201 Tablet, I couldn't find one that works on Windows 7 x64.
How can I proceed?
Thank you in advance
Solved!
Go to Solution.

I fixed it by downloading this drivers:
https://downloadcenter.intel.com/download/18713/Network-Adapter-Driver-for-Windows-7-
And after installing them and restarting, searching for them manually from the Device Manager.
Cheers

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Questions on Drivers & printing to networked Windows computer (CANON)

I'm trying to print over a network, to a CANON printer connected to a Windows PC.
My initial attempts resulted in the document being printed 75% smaller on the upper left corner of the page only. (Margins etc. are all fine).
Sounded to me like a driver problem, so I downloaded the latest driver for OS X(from CANON). I installed the driver, but now, when I try to setup a new printer, I still can't see my printer model (ip5000) in the available list. (The options are either Generic or one of the gimp drivers that came with OS X).
Where did it put the driver? - How can I make the printer use it?
And, how do you un-install a driver? (in case it doesn't work)
Thanks.

Hi there,
The drivers for the Canon PIXMA range of printers are not designed to work across a network, they are for direct USB connections. As has been mentioned numerous times in this forum, if you want to print to a Canon BJ printer that is networked, ex. shared by a Windows PC, you need to use the CUPS (GIMP) drivers that are included with the OS. The only exception to this is for the R series of the PIXMA printers, which have an Ethernet and wireless connection. There is a Canon network utility that redirects the spooled file to the remote printer.
Try using the S800 GIMP driver. You will have to open the driver properties and set it to Text to get good quality printing.
Better still, download the latest release of Gutenprint 5.0.0 and use the iP4000 driver. It works nicely to my iP5200R hanging off an XP SP2 box.
Regards,
Paul

How to uninstall print drivers Canon MF4150 issues

Hello all, I am having a nightmare of a time getting my Canon MF4150 to print. It looks from all of the threads on here it was a less than ideal choice for a Mac owner.
When I first bought the unit I managed to get it to print, everything seemed peachy.
Problems arose when I wanted to use the unit to scan. I downloaded a variety of third party software and drivers in an attempt to get the scan function working. I had mixed results, and this process seemed to upset the printing side of things. Once I scanned a document, the printer would then not work.
I abandoned the idea of scanning through the MF4150 and have gone back to dedicated Epson scanner.
Since then I have not had any luck getting the printer to print again.
I have gone through all the MF4150 related threads on these boards I can find, and followed the process to installed outlined here - https://discussions.apple.com/message/7657893#7657893 but to no avail.
I really just want this thing to print and it's driving me nuts.
I have the printer attached directly to my MacBook Pro running 10.5.2. I'm not trying to print through the Airport.
I would like to know how to completely uninstall any UFR II drivers and related software / information and start this process from the beginning again.
So far, using the answer provided by PAHU here https://discussions.apple.com/message/7657893#7657893
I have -
1. Open System Preferences > Print & Fax
> DONE
2. Select the MF4150 printer and press the minus " - " button to remove the printer. Do the same to any other printers that are in the printer list.
> DONE
3. Hold down the Control key and click in the empty printer list. A window showing 'Reset printing system' will display. Click this.
> DONE
4. Close the Print & Fax utility.
> DONE
5. Run the Canon UFR2 v1.70 installer and select Uninstall when the Easy Install menu appears
> This is where I get snagged. I'm not offered a Uninstall option. I have attached a screen grab of the window I am presented with. I am currently trying the "o1141enx_m_ufr224" version of the UFR driver. I have continued to complete the points below regardless of the fact i cannot uninstall.
6. Restart the Mac and run the v1.70 installer again to add the UFR2 files back onto your Mac
7. Go to Applications > Utilities and open Disk Utility. Select the Mac OS X partition in the left pane and select 'Repair Disk Permissions'. When this has completed, quit Disk Utility
8. Open Print & Fax and add the MF4270 again
9. Open TextEdit, type some simple text and select to print.
10. Report back if the above doesn't get you printing.
I have also attach a screen grab of the process I go through when adding the printer.
Any help with this would be amazing. I've tried everything I can think of.
My latest idea is to try and remove any trace of previous printer drivers and go from there. You can see in my list of available drivers in the file attached I now have all sorts of UFR drivers in the list.
Again, if anyone can throw me a line on this that would be great.
Thanks & Regards
Coz

Hello Coz,
It's been a while since you've posted, I hope you have not given up. I was having grief with my MF4150 as well, but got it working. There is a more current driver - search for Mac_UFRII_V230_uk_EN and install it.
Then, when you go to add your printer through System Preferences > Print & Fax, make sure you click the "default" icon in the top of the dialog. It should show your Canon MF 4100 series , then use the bottom drop down menu to choose your driver and select Canno MF410 Series UFRII LT (UK) from the list.

?intel iris drivers on macbook pro retina 15" 2014

hi all, i need help i'm lost
it's been 3 days trying to install the intel iris graphic card drivers for the iris 5200 that is shipped with nvidia 750m on the macbook pro 15" retina 2014 and i'm not able to install the drivers.
i installed the preview version of win10 and i rolled back to the preview version of 8.1 both 64bit
and there is something weird, because my bootcamp is only able to install a preview windows version, even having a pro version with product key of 8.1, at the end of the installation, windows say that the changes on my computer can't be saved, so no working windows 8.1 pro
as you are aware, bootcamp download the intelLegacyHdGraphics64.exe together with all other drivers like the nvidia one.. but only the iris drivers will be not installed. the error message is always the same: this computer does not meet the minimum requirement for installing the software.
so, i went to intel site and i downloaded all available drivers, the intel SDK for ocl applications... 2014.exe, the "opencl runtime 14.2x64. package.. installed correctly.
what i'm not able to install are all drivers i could find on the site for the iris.
Intel® Download Center
but i'm getting always this message: this computer does not meet the minimum requirement for installing the software.
the nvidia 750 works as expected, and i did try everything to install the iris drivers.
i also tried to uninstal the nvidia drivers also using the device manager, not just simply disabling it.
and after booting again.. the iris is not listed in the device manager, just the microsoft default display. and trying to install the drivers manually failed too, but that was expectable since there is no intel iris menu from which to pick manually the drivers.
if i try to install using the compatibility tool i get the message that the os is not supported
I'm lost lost lost
did someone try to install them? maybe had luck under a win7? or it is a lost war?

patroo wrote:
I Want to use luxrender and luxmark on windows too
the benchmark score of the iris 5200 in osx mode is 4880 while the score of the nvidia is 900/1100
that is a huge difference in speed
I am unable to search http://www.luxrender.net/luxmark/ for benchmark data. Is there another way to get to these numbers? If you use the nVidia that is currently exposed to windows, do you run into any issues for Rendering?
Edited: on my acer running win7, i disabled the intel graphic card for the sake of Nvidia 330m from bios, and it works
this should be possible in win 8.1 too? as i know those setting aren't anymore available as bios mode.
is there a way to unhide the iris 5200 and permanently disabling the nvidia 750 in windows?
You may want to start by looking http://forums.macrumors.com/showthread.php?t=1658931.
btw maybe you can answer to this. Running luxmark in yosemite, when i benchmark using cpu, iris, or cpu+ iris the fun becomes noisy as it should, but if i benchmark just the nvidia card the fun doesn't start. and this should be not normal at all.
This seems to be normal behavior from my experience. The integrated GPU (CPU+Iris) produces much more heat than the discrete nVidia. If you do not have a case on your MBP, put your palm on the bottom panel, and run both tests. You can also use something like iStat to look at the temperatures of various components while running tests.

Creative Audigy 2 NX OLD and undercapable drivers are way below industry standa

Hello All,
I have tried not to push this, for the past year, but I have really reached the end of my patience. The driver support for the Audigy 2 NX (USB-External) sound card is nearly 'non-exsistant'and it is have a major adverse effect on my gaming.
It has been more than a year since Creative has taken the time to provide the many owners of the Audigy 2 NX -USB sound card with a driver that is anywhere near the capabilities of the sound chip in our device. We do NOT have support for Open AL, we do not have 'REAL' support for EAX 3 or 4 (I mean a driver that REALLY works on most; Lucasarts, EA, and Valve games), and NO HD 'Dependable' support in games or DVD play back.
This is a crime, seeing as this card costs JUST as MUCH as the Audigy 2 ZX (that I also own, and bought FIRST for my HP zd8230us... and used until HP Tech support told me to NOT use the PCMCIA card) and yet has Half the features and lass than /4 the driver support... for the same money!! That is right, I said 'Crime', because I have been buying and using ONLY Creative cards for the past years and have never EVER seen Creative turn their backs on a product the way they have done with the Audigy 2 NX.
Let me be 'Brutally Honest' about the lack of support and 'Expanding Use' of a FINE audio chipset. While Creative has regularlly expanded the features and use of the chipset in the ZS notebook card (added EAX 4.0 support, refined the HD support, and made regular driver updates), they have left the owners of the NX sound card BACK in the 20th Century. There is NO support for; EAX 4.0, Open AL, OR THX for my NX the very same people have gone out of their way to provide ALL of those features and regular updates and expansion of these SAME features in the ZX Notebook card. I have both of these cards, and have used both in my HP Pavilion zd8230us Notebook computer. I have to be clear and precise, the difference in; sound, use, and capabilities of the ZX to the NX is like putting a SB 'Li've' card against and Audigy 4 card. I paid the exact same amount of money for BOTH cards, yet (because my mobo does not support the PCMCIA card) I am left with this 'Black Sheep' of the Creative family, and this has me at the point I am seriously thinking of never buying another Creative product for ANY of my four desktops and one notebook in my entire life.
I am experiancing problems with the NX card on; Half Life 2 and HL2 - Episode , ANY Lucasarts game (they work sometimes and mostly do NOT), MOST EA Games titles, and Activision games are not much better. In my current notebook hardware, my Audigy 2 NX is the 'Weak Link' in the chain. I have a Pentium 4 HT 650 (3.4Ghz-800 Mhz FSB), ATI X-600 PCIe 28MB video card, 024 MB 533 MHz DDR2 RAM, and XP Professional with Media Center 2005. My Audigy 2 NX is what is keeping this system from reaching it's FULL and AWESOME capabilities in; Gaming, DVD playback, TV HD audio, Media Center On Line services, CD & DVD Audio playback, and every other Audio aspect of my near cutting edge system.
This is completely unacceptable, and to add insult to injury. When ever I contact Creative support regarding updated drivers, or problems with the current *MORE than year old drivers, I am told "Creative has no plans to update or upgrade the drivers for your sound card". WOW, that is the lowest point in years of purchasing and using Creatives (usually) fine products and services. Why has Creative turned it's back on the awesome sound card/chipset and is there ANYTHING that a lifetime user of Creative products can do to get more and better support for the ONLY product you make that is compatible (as per HP) with my new notebook computer? I am dead tired of this product being the 'Bottleneck' in my system. I am frustrated, to the extreme, at the completely apathetic technical support for a 'same priced' item as the ZX.
What can a consumer do?
Terribly Desperate,
Enzo Matrix

OK, first; thanks for the link. It is very much appreciated. Next, this is the only card compatible with my Pavilion zd8230us (as per HP Senior Support Technicains). I was told that the Audigy 2 zx PCMICA was compatible (BY Creative), only to be told by HP that that card can and will do damage to my notebook. I find it very disturbing that Creative would suggest a product that would damage my computer! Last, the box (for the NX) says that it is 24 bit HD audio 96KHz/02db Signal to noise ratio. As well, it clearly states ON THE FRONT OF THE BOX:

"...EAX ADVANCED HD game effects" 

Sorry, but in English (at least American English) that means it supports EAX in games, yes? lol So, THEY Are the ones that decided to put that on the FRONT of the box, if it doesn't support it then they should have a class action lawsuit filed against them by EVERY SINGLE person that ever purchased an NX and we should be paid for; purchase price, pain and suffering, and puniti've damages. THEN Creative might learn a lesson. roflol

Now on to the 'driver' isssue. Simple, Alexs3d2, the American consumer expects 'Driver Updates'. Why? Simple, what version of Direct X was standard when the NX came out, and what version are we using now? Microsoft sees fit to improve the API that Creative is making money off of, but Creative does NOT see the responsibility to the consumer to keep UP with the technology that we end users update on a regular basis. Next, I am tired of people dogging ATI BECAUSE they have taken on the responsibility to issue monthly driver updates! Granted, Alex, you may well understand 'what' the driver updates ARE better than the average user. However, that does NOT dismiss the BETTER PERFORMANCE that WE experience every single we update or display adapter drivers! Just because slough (on the part of SOME companies) is accepted by a small cross section of the population does not mean that the rest of us should LOWER our expectations? of the company that WE keep in business. Least THEY forget that WE are the reason they ARE in business!!! Driver updates are GOOD. Driver updates are what end users EXPECT. Any company that does not want to support a product that is still on store shelves should just pack up and leave. Period. 

Last, here is a little quote from the back of the NX box. 

"USB 2.0 is only supported in Windows XP and REQUIRES ONLINE SOFTWARE update(s) from Microsoft and SOUNDBLASTER.COM..." 

How the hell am I supposed to accomplish THAT when Creative screws me out of what they tell me I require? 

In closing; this venue is not the only place that I have been sounding off a bout this problem. I have written Creative (SB) Tech support, and they are giving me 'double speak'. I have kept every single email that they have sent back, and cc'd to another email addy for verification. I li've in California, and you can not swing a dead cat without hitting an attorney. I WAS hoping that Creative would be GOOD and RESPONSIBLE partners, but they have forced my hand. I have filed a complaint with the California Department of Consumer Affairs, and am in the process of gathering users for the afore mentioned 'Class Action Lawsuit'. This way, the PEOPLE get to decide WHAT is responsible corporate stewardship, and IF Creative is acting in a deliberate way to misrepresent their products, and their capabilities and IF they should have to release Drivers just the way they tell us they are going to on the packaging!! 

EnzoMatrix

P.S. Umm, the whole Nazi thing... that is a bit over the top. I am Jewish, and Creative may have killed my love of their products, but I do not know of anyone that they have actually killed. If you know otherwise, let me know... that info could come in very handy in my class action lawsuit!! roflol
P.P.S. Looking at this forum, I get the impression that I am not the only person that feels screwed by SB and Creative. THAT should make for a VERY favorable jury pool for the lawsuit.
Message Edited by EnzoMatrix on 07-2-2006 2:3 AM
Message Edited by EnzoMatrix on 07-2-2006 0:2 AM

Windows Vista wont install Ipod drivers

OK I NEED HELP....
I have Windows Vista and I am trying to install my iPod Nano, but everytime I plug my iPod in it ask me to insert the CD that came with it. As I don't have a CD I just click to install drivers automatically. Than it gives me an error saying 'unable to install drivers'. The divers do show up in the device manger under- other devices but there is a little warning sign next to it. So I right click on it and update driver, which it then tells me that it can't update driver. I have the latest version on iTunes and Quicktime, and I have also done a restore on my pc. Spoken to Apple 4 times!!! got no where with them. My iPod works fine on Windows XP machine, but not my Windows Vista. Has anyone else had any troubles with Vista??

I'm not sure my problem with Vista is the same. New computer with Vista, and I'm trying to transfer my library from old computer to new one. I loaded latest version of iTunes. When I put in my apple ID, my acct balance and items in my shopping cart appeared. When I connect my iPod, it is recognized.
I found an article that gave two options for copying library to new computer. One was to use backup discs to RESTORE, and the other was to use the iPod as a hard drive. It says that it will ask if I want to restore when I insert backup disc, but it does not ask. I tried Import, but tht didn't work either. When I connect my iPod, it doesn't copy the contents from there either. It only gives me the option of erasing iPod and loading what is on new library (which is only about 12 songs). I get a msg that I am synced to another library and can only be synced to one. I still got that msg after I deauthorized the old one.
Any suggestions on how to load music onto new library?
Thanks in advance!

Windows Vista Ipod Nano drivers??

When I connect my iPod nano 4gb to my new laptop, with iTunes 7 installed, it tells me it needs to install drivers and insert CD...but I dont have the CD!
Can anyone give me a link for these drivers at all, or give me adivice on how to get around this?
I've previously read a suggestion to manually search for drivers by specifying 2 distinct folders - System32 I think, and also going through Control Panel, Devices, Ipod, then selecting different options for updating drivers.
Nothing works yet!!!
Please help guys

Something is going on with your Nano if Vista doesn't see it anymore. Did you use device manager and try to uninstall your Nano? Perhaps this will work. Once uninstalled, the next time you plug it in, Vista will see the Nano as a new device and install the proper USB drivers.
I'm not on my Vista computer right now...but here's an article to help you find device manager in Vista: http://kb.wisc.edu/page.php?id=5183
Good luck!

1st generation iPod not recognized on Vista - drivers / hardware not found

I have a new PC, which now very unfortunately runs Windows Vista as an operating system - I have installed iTunes latest version 7.4 but still the PC does not recognize my iPod or doesn't find the hardware - can anyone help?

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Ati drivers no longer work after upgrade

I was trying to mount a vfat partition the other day, to copy files from a friends USB drive. It would not mount no matter what I did. I had found out that for some reason, the last kernel that I updated to did not have the proper character set enabled in it before it was compiled. I noticed there was a new kernel, and decided what the heck, and gave it the old pacman -Syu
I rebooted after this only to find my x server now crashes. So I did some research and it seems that there is a lot of complaints about this new xorg 1.5. So I thought about downgrading, but decided against it. I did a hwd -x, and copied over the xorg.conf.vesa, and restarted X. It worked. I then tried with the ati driver and it doesnt work.
So I am using x, with the vesa driver. And I can view videos (these were the files I wanted to copy from my friends USB drive. Although I can now mount it, and have copied them fine.)
Here is some output
[shawn@lungbox ~]$ lspci | grep -i vga
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
[shawn@lungbox ~]$ pacman -Q xf86-video-ati
xf86-video-ati 6.9.0-5
[shawn@lungbox ~]$ cat /etc/X11/xorg.conf.ati
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
BTW, when the xserver fails, I select yes to see the output, and it skips the output and tells me to re-enable x when I have configured it properly. So I cant seem to get you that information.
Side note: I can also not upgrade gnome-terminal. I get this error:
[root@lungbox shawn]# pacman -S gnome-terminal
resolving dependencies...
looking for inter-conflicts...
Targets (1): gnome-terminal-2.24.2-1
Total Download Size: 0.00 MB
Total Installed Size: 9.58 MB
Proceed with installation? [Y/n] y
checking package integrity...
(1/1) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
gnome-terminal: /usr/share/gnome-terminal/encodings-dialog.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/keybinding-editor.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/profile-manager.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/profile-new-dialog.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/profile-preferences.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/skey-challenge.ui exists in filesystem
gnome-terminal: /usr/share/gnome-terminal/terminal.xml exists in filesystem
gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/figures/gnome-terminal-default.png exists in filesystem
gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/figures/gnome-terminal-tabbed.png exists in filesystem
gnome-terminal: /usr/share/gnome/help/gnome-terminal/cs/gnome-terminal.xml exists in filesystem
gnome-terminal: /usr/share/locale/kn/LC_MESSAGES/gnome-terminal.mo exists in filesystem
gnome-terminal: /usr/share/locale/mai/LC_MESSAGES/gnome-terminal.mo exists in filesystem
gnome-terminal: /usr/share/locale/ps/LC_MESSAGES/gnome-terminal.mo exists in filesystem
gnome-terminal: /usr/share/locale/sr@latin/LC_MESSAGES/gnome-terminal.mo exists in filesystem
gnome-terminal: /usr/share/omf/gnome-terminal/gnome-terminal-cs.omf exists in filesystem
Errors occurred, no packages were upgraded.
I am not impressed by the update problems I have been having recently. I've been using arch for a while now, and everything has gone smooth exept for the last 2 months, I have had about 5 seperate issues. Not sure if im the only one feeling this. Might be my set up who knows.

The xorg.conf.ati was renamed to xorg.conf. I had named it back when it didnt work. And renamed xorg.conf.vesa to xorg.conf to have a usable x session.
Here is my output for Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux lungbox 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:31:10 UTC 2008 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 26 22:52:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Rage Mobility P/M AGP 2x rev 100, Mem @ 0x40000000/0, 0x41000000/0, I/O @ 0x00002000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 6.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mach64"
(WW) Warning, couldn't open module mach64
(II) UnloadModule: "mach64"
(EE) Failed to load module "mach64" (module does not exist, 0)
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(EE) No drivers available.
Fatal server error:
no screens found
I have tried to remove the xorg.conf and retry the x server. It opens but I have no keyboard or mouse control and the resolution is incredibly small (640.480?). I can not log in, or change to any tty because of a lack of keyboard, and I am stuck rebooting my computer, which results in a fsck and all that good stuff.
As for the gnome-terminal problem, I managed t get around it by removing the package, updating my system, and reinstalling gnome-terminal. I wanted to try that since there were new ATI drivers waiting to be installed. But the new ATI drivers do not seem to do me justice. :S
And sorry for not getting back right away. I was just using the VESA drivers to get me by. I had a lot of work to do before the holidays. And now im back on it.

Window ia Player is no longer recognized by my PC. All the drivers have been serviced etc....

My Window Media Player 12 opens but will not recognized the burner and will not reconize any disk. It has been fully checked for drivers etc... but stil tells me to install a burner.

Hello,
What computer model do you have?
Have you tried to use any other burning software to verify if the burner is detected in a different tool, to see if the problem is really relatedto WMP and not to the ODD having a problem?
Is the drive detected in windows explorer? If you check in device manager, how is the ODD detected, can you please describe?
Waiting for your feedback.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Can't find drivers for ipod nano 8GB for windows vista HELP

I am trying to find the drivers for my ipod nano 8GB. I am running Windows Vista on my laptop. I have tried absolutely everything listed on this webpage and others. I have removed itunes and reinstalled it and still nothing. I downloaded usbstor.sys and usbstor.inf. I have gone into my computer and clicked on the ! next to my ipod in file manager and have gotten nowhere! This has been 5 days of frustration. I don't understand why apple would not just SUPPLY the software for the nano. I am beyond frustrated now. Can someone please help...

Something is going on with your Nano if Vista doesn't see it anymore. Did you use device manager and try to uninstall your Nano? Perhaps this will work. Once uninstalled, the next time you plug it in, Vista will see the Nano as a new device and install the proper USB drivers.
I'm not on my Vista computer right now...but here's an article to help you find device manager in Vista: http://kb.wisc.edu/page.php?id=5183
Good luck!

Ms-6555 drivers

Similar Messages

Maybe you are looking for