MS-6741 sata setup PLEASE HELP!

Hello:
I have a MS-6741 board that I am trying to setup with 2 WD 1200 sata drives.
(This is my first experience with sata drives) I am trying to do a Raid 1 setup.
I can't even get to square one with this!
Problem: When I plug in the cable from the drive to the MB the drive will NOT power up.
If I remove the MB cable from the drive, it power up's OK. It will do the same thing with the second drive.
I am guessing it's not the drives because they both do the same thing.
Any help SURE would be appreciated.
Tks.
bdannels

I talked to a Tech guy at MSI.
He said the WD 120 drives I was using MUST have the jumpers on because of a problem
with using the drives with the MSI board I am using.
I put the (Drive) jumpers on and everything is OK.
It's all easy when you know how
Thanks for you help
bdannels

Similar Messages

FLEX and CF Debugger setup - PLEASE HELP

I can't get the line debugger for CF in eclipse to work for
the life of me. I've been trying this for over 8 hours now. I
follow the directions on all the tutorials out there on the web and
still no luck. All my CF admin settings are correct. I think it has
to do w/ the debug mappings but not sure. I have a remote CF server
and am running Flex Builder 3 off of my local laptop (so wouldn't
that mean that the server and Eclipse are not on the same machine?)
My web root is a mapped network drive to the remote CF machine
(z:\websites). I can connect to the CF RDS fine... I can use the
wizards fine... I can set the breakpoints on the CFC page fine...
but the debugger just will not show me any variables. Please help
me to understand what I am doing wrong.

For anyone having difficulty setting up the debugger please
follow these steps (btw all the tutorials out there are awful and
leave out important steps so I thought I'd document this to help
others out). Being a software application developer and not a
network admin these remote paths can be rather difficult to
understand.
1. uninstall any Flash player or plugins you have
2. run and install the Flash player and debugger that comes
with Flex Builder (its located in the Flex installation folder,
mine was under C:\Program Files\Adobe\Flex Builder 3\Player\win).
You'll see 3 files, but only need to install Flash Player Active X
and Plugin
3. Ensure you'r debugger and tester are working (CF line
debugging is enabled). In Windows Preferences under Adobe -->
RDS click the 2 test buttons.
4. Install CFEclipse (to be able to get code hints and have
Eclipse color code cfm and cfc's like DreamWeaver does)
5. Make sure you have 2 breakpoints in the section you want
the debugger to stop. I was using 1 and on an empty space and that
wasn't stopping on the breakpoints. Also make sure the breakpoints
are on a coldfusion command line.
6. If you are using localhost don't add anything to the
mappings section other than
http://localhost:(your port
number, if you run CF admin you will see the port number in your
URL). If you have a CF server remotely though this is the TOUGH
part. It took me days to figure out my mappings. I'll just give you
my setup and work with that to figure out you're own.
I mapped my remote server drive to Z:\ and my WWWroot is
z:\websites so the correct Eclipse path = z:\websites.
The correct Coldfusion path is /websites (don't ask me why or
how, but anything other than this was not working)
7. Run the debugger by clicking the right arrow next to the
debug icon, select Other and select CF(launch a new config is you
dont have one already). When you set it up and press "Debug"...
press F11 to run a browsing session. Navigate to the page you set
breakpoints for and the debugger should work!
I hope this helps and saves others the agony of playing
around with mappings.

E 6 Personal Mail setup -- please help

Hello E6 experts,
can you please help me with the steps involved in setting up personal mailboxes in the E6? It's been asked before here... Every time I begin using the mail setup "wizard" I only reach the option for Mail for Exchange. How can one bypass that to setup Gmail and a regular, Imap personal mail box? What might I be missing? Thanks in advance...

Hello again,
I just found out about the problem-- One has to have a SIM card installed (at least for the first time) to be given the options for the various mail services up-front during mail setup. I was trying t do this without a SIM card --using the WiFi connection-- which every other cell phone I have owned allowed me to do. Apparently the E6 is different... Perhaps this will help someone

5800 MMS Setup - Please Help

Hi,
I can receive MMS on my Nokia 5800 but cannot send. I have received the server settings from my service provider and saved it. Did the setup and rebooted my phone, but it keeps on going to the outbox and it will try and resend every 10 min.
I did phone my service provider but they cannot assist me as the network settings are as far as they can assist.
Please help me, I am desperate. I really tried everything.
Regards,
Malinda V

I guess, you're not all that stupid. You can upload, but not download. You can use the phone as a modem, whitch uses the same config files they send you. Facebook could very well be the culprit, because it uses the same connection. Exit all apps before connecting your browser. If this problem continues, contact your SP( 50MB? they should be ashamed) again and again and again till they sorted it out. You rule!
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Reset server password/setup PLEASE HELP!!

Hi, thank for looking at this and trying to help.
I am the proud owner of a mac mini lion server. The problem is in my playing around with getting a new product (like we all do) I came across the server I have done some research and I really like the idea of it and want to put it into good use. (the reason I got the server one was because of the better hard drive, before you ask why did I get it if I didn't know what the server bit is)
The only problem is, whilst playing around I set up the server. I now go back into the server app and it says type in admin name and password which is already on there in the key chain. I press connect and it fail. ( whic is weird as I would of had to of typed it in for it to be in the key chain)
I have tried different user names as I only use one password. And still it shakes at me saying it's wrong.
The question is how can I reset the Account? Without losing all my info.
PLEASE HELP I want to use this great feature!!

Same problem as the others. I have a 2 week old Mac Mini and arrived at this point after I'd followed the Hoffman Labs (http://labs.hoffmanlabs.com/node/1436) DNS setup and not being able to get past the "Available Servers (0)" problem rported elsewhere and then a subsequent new system restore. I also can't get past the:
sudo changeip -checkhostname
Current HostName = server.local
The DNS hostname is not available, please repair DNS and re-run this tool.
I feel I'm at the point of an erase and clean install.

K7n2 Delta RAID Setup ----PLEASE HELP

Can someone explain how a RAID - Striping should be setup on this MOBO? I can not get the board to see the 2nd drive. I have duplicate Maxtor 40gb drives and it will only see one of the drives. I am using IDE3 for one of the drives and then putting the other drive on IDE1. The manual states that you can only have 1 HD on IDE3 thus the reason for setting it up this way. I have also tried the 2 maxtor drives on IDE1 with another drive on IDE3 (dummy RAID) hoping that this config would work as well, but it did not!
Please help!!!!!!!!!!!!!
Thanks in advance for any and all replies.

It does support RAID. I have been able to go into the Fastrack utility and setup a RAID consisting of one drive. The manual also states that all IDE slots support RAID. It has the promise 376 chip.

Anyone using sata_promise w/ SATA drives, please help.

A recently submitted a kernel patch to ensure that PATA ports are detected on Promise FastTrak controllers with both PATA and SATA ports. I have no way of testing SATA drives with this patch. Could someone using one of these controllers with SATA drives please patch a kernel and see if everything is still good?
Bug Report #4770

I'm using sata_promise with a SATA HD. Unfortunately, since Linux 2.6.17 it doesn't want to boot anymore (kernel oops on startup). For now I am using 2.6.15-archck which I still had lying around fortunately, though 2.6.16 also worked for me.
Do you by any chance know about this problem? According to linux changes, this has happened to the promise driver:
* Add support for the Promise Fasttrak TX4300/TX4310 4-port PCI SATA controllers based on the PDC40719 chip to sata_promise driver (commit)
But that was actually a very minor patch, I guess some other promise/sata related change broke it.

New system drive and memory setup - please help!

Please excuse these newbie questions. I DO understand that these issues have been discussed ad nauseam in this forum. But I have spent probably ten or twelve hours exploring the various threads, and partly owing to my ignorance, partly to the specifics of my situation, partly to the disagreements between various posters, and partly to my concern that some of the clearer statements on e.g. SSD’s may have been outdated by the progression of technology, I would greatly appreciate it if I could get some recommendations for my specific situation.
I am going to purchase an HP Z820 sometime in the near future. I do NOT want to build my own machine; I have just enough technical knowledge to be dangerous, as they say, and want one-stop shopping for technical support if my machine develops problems.
While I will use this machine for a variety of applications, my main concern is to optimize it for Premiere Pro. Based on Harm Millaard’s (who to my untutored eye seems to be one of the most prolific, knowledgeable, and helpful individuals in this forum) “Guidelines for Disc Usage” of two years ago, I plan to install a 300GB SSD for my boot drive, and to construct a RAID 5 array out of the remaining drives. (The Z820 does not support RAID 3.) The array drives will be either five (5) more 300GB SSD’s, or four (4) 600GB 15,000 RPM SAS HDD’s.
Assume for the sake of argument that cost is not a factor, and that the 1.2TB storage offered by the 5 SSD drives in RAID 5 (vs. the 1.8TB offered by the 4 SAS drives) is perfectly adequate, which would you choose? And why?
I should add that I am a video hobbyist, not a professional, so the outfit will receive a lot less pounding than a professional’s machine. Thus, I don’t THINK that the theoretically more limited life span of the SSD’s should be an issue, over, say, the next 3-4 years. (Correct me if that SHOULD be a concern.)
Re memory, I am planning on 32GB of unbuffered memory, the maximum the system will support. I COULD get 64MB, but it would have to be registered RAM, which I understand slows things down. The slight improvement in reliability with registered RAM is not really a concern from my hobbyist standpoint; and I think 32GB should be adequate. I use 1080/60p footage, which of course is demanding, but don’t use a lot of special effects, or other Adobe applications for input to Premiere (aside from Photoshop, occasionally). Anyone disagree with this choice?
Finally, is there a role for a RAMdisk in this outfit, for e.g. cache files? Would this increase the speed, or decrease the using up of write cycles on the SSD’s to a degree that would be significant for practical purposes? If so, how much RAM would you dedicate to the RAMdisk?
Again, sorry if you feel these questions have been adequately addressed in pervious threads, but try as I might I simply can’t manage to put it together on my own. And thanks in advance for any help.

Pardon me for jumping in. (I realize the question is to Harm.)
I am going to purchase an HP Z820 sometime in the near future.
Congrats, this is a great system.
... I plan to install a 300GB SSD for my boot drive, and to construct a RAID 5 array out of the remaining drives.
The 300GB SSD - is that an HP model? If so please reconsider: it's an older Intel SSD X25-M series that is slow, and runs at SATA 3G speeds (not 6G), which doesn't do the Z820 justice. Intel 520 series has been tested (by yours truly among others) and can be used in the Z820.
The array drives will be either five (5) more 300GB SSD’s, or four (4) 600GB 15,000 RPM SAS HDD’s.
As Harm will probably tell you: unless you also run a database server on that system, there is no advantage to 10K, 15Krpm or even SSD drives for video purposes, with the exception of possible reliability (enterprise class 10-15K drives and SSDs are tested much more extensively than desktop and nearline drives) and throughput in case of SSDs if, for instance, your workflow demands extreme bandwidth (e.g. recording of uncompressed 4K 12-bit RGB signal).
Assume for the sake of argument that cost is not a factor, and that the 1.2TB storage offered by the 5 SSD drives in RAID 5 (vs. the 1.8TB offered by the 4 SAS drives) is perfectly adequate, which would you choose? And why?
Hypothetically, I'd choose SSDs: higher reliability, responsiveness, performance, lower power consumption. I'd do research though to ensure they'd keep up with a lot of write I/Os thrown at them.
In reality, I'd choose neither, for reasons I mentioned above. 7200rpm nearline drives have sufficient performance for the purpose, and the capacity is much higher per dollar.
I COULD get 64MB, but it would have to be registered RAM, which I understand slows things down.
Not necessarily. The 2% difference between ECC and non-ECC memory (negligible as it is) is not at play here because Z820 does not support non-ECC memory. Registered or not, it has to be ECC, and registered memory is not necessarily slower than unbuffered. Even if it was, the 2% difference is unlikely to make any perceptable dent in performance given that no editing system runs its memory at 100% bandwidth at all times. Then again, if cost is not a factor, you could always swap unbuffered for registered later on.
Finally, is there a role for a RAMdisk in this outfit, for e.g. cache files? Would this increase the speed, or decrease the using up of write cycles on the SSD’s to a degree that would be significant for practical purposes? If so, how much RAM would you dedicate to the RAMdisk?
For timelines with limited number of effects, I wouldn't bother, with the premise that Premiere Pro has decent memory management on its own, and that memory will serve better if just given to Premiere Pro.
If on the other hand you do start using AE heavily, you might want to dedicate a (portion of your) SSD to "global performance cache" which is a fantastic time-saving feature of AE CS6.
HTH.

Dv7t-3000 - Sata or Sata 2 - Please help explain what this has!

I assumed that Sata 2 being mainstream for so long, this new laptop of mine would have it.
I want to buy one of the nicer SSD for this unit, but I can NOT confirm anywhere that it will run up to 300 megs.
If it's Sata 1 then I wouldn't be getting much performance gain from a SSD as this 7200RPM HDD rates up to 100 megs.
I contacted HP Support and got told that my laptop only has Sata 1.
I find this impossible to believe. Why in the world would HP do that? I read in a post on the forums that this laptop
falls into the top 5% for overall performance for laptops. How is that so unless it has sata 2? Why would they
have old Sata 1 in such new technology?
Can anyone confirm if HP Support is correct? I have the guy second guessing himself right now and he asked for serial number to try and find documentation to support his claim. I may have to RMA this beast and start searching for a laptop that has SATA II because that is the main reason I wanted a laptop! For the SSD to WOW me!
Thanks in advance for your thoughts, input, and effort you may put into this!
WWW2000
UPDATE:
Otay. Now I understand why all the reviews out there say what they say about HP support. Makes you feel like you carried your new puppy into an auto garage to learn about it. WRONG people, wrong place!
Can anyone who knows english and knows about computers please tell me why the ... why HP would be retarded and put Sata 1 in this killer laptop? Do they really enjoy upsetting their customers? All I kept getting for that supervisior was "you computer customized and you hard drive you choose sata 1"
I bought it directly from HP.com so I could have everything in it that you may not get from a retail store. She couldn't seem to grasp that nowhere on hp.com does it let you know if you get sata 1 or sata 2. Option not offered and it SHOULDN'T be. It should automatically be sata 2! Sata one was like so 1998!
Sorry for being so upset. I just want a killer SSD to make this beast all it should be and HP is telling me it's not going to happen. Do I need to start an RMA? Or can someone confirm that I can get read speeds of 230 from that SSD I want?
Message Edited by www2000 on 12-01-2009 11:07 AM
This question was solved.
View Solution.

Hi,
Many owners(those who can afford it) of the dv7t series are putting OCZ agility and vertex drives in to replace their SATA hard disk.
I have no doubt that the speed of the SSD disk will wow you even if it isn't SATA2. Think about restart times of 58 seconds!
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Email Setup - Please Help!

I'm trying to complete the setup wizard on my Curve 8520 but when I go to Email Setup there doesn't seem to be an option for personal email addresses, only for work email accounts. Can anyone tell me how to find the non-work option? Thanks x

Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email functions you are looking for, as well as addtional BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Having Issues with E1000 as an Access Point setup - Please Help

Quick background - Using an E2000 as my main router for a DSL connection (using an ISP provided Zyxel 660HW modem with wireless disabled if that matters). I have an E1000 that I want to setup as a LAN to LAN connection to the E2000 at the far end of the house and two floors down to extend my network.
I am pretty network saavy and thought this would be a snap. But I am running into trouble and hoping someone can assist.
Here are the steps I took:
1. I ran a CAT 5 connection down to the basement where the E1000 is to be setup.
2. I hard reset the E1000 to factory defaults
3. I connected my notebook to the E1000 via a LAN port. At this stage the E1000 is NOT on the network
4. I configured the E1000 with an IP of 192.168.1.2 - my main router (E2000) is set to 192.168.1.1 and the IP ranges start at .100 so this should present no conflicts
5. I disabled DHCP
6. I disabled NAT
7. I saved settings and rebooted router
8. I removed connection to notebook and plugged in the CAT 5 run from the E2000 - LAN port 1 on both (no WAN/Internet port used)
At this stage I expected the E1000 to act as an Access Point but it is not functioning properly. The first thing I notice is that the E1000 that should now be the AP is broadcasting the router name (something like Cisco 54653) even though this is not a broadcast SSID but only the router name. That is odd, I believe.
I have tried rebooting both the E2000 and E1000 along with the modem, no luck. I have tried different IPs for the E1000 just in case but again no luck, the wireless is not extended.
Any advice or guidance? Am I doing something wrong?
Any help is appreciated.
Solved!
Go to Solution.

It sounds like you have configured the E1000 properly, but you didn't describe how you have configured the Zyxel and E2000.
Do you have A or B ?
A. Zyxel set to full bridge mode. Then connect Zyxel to E2000's internet port and configure E2000 for PPPoE internet connection type (and DHCP server enabled and NAT enabled). Change MTU to manual on E2000 and enter 1492. And then connect your E1000 as you described. Internet connection type on E1000 is AutoconfigDHCP.
B. Zyxel is configured as modem/router (DHCP server enabled and NAT enabled). Then connect Zyxel to E2000's internet port. E2000 is configured as router (DHCP server is enabled and NAT is enabled) and local IP address is 192.168.2.1. Internet connection type on E2000 would be AutoconfigDHCP. E1000 is configured as you described except local ip address is 192.168.2.2. Internet connection type on E1000 is AutoconfigDHCP.
http://support.earthlink.net/articles/dsl/zyxel-p660rd1-how-to-set-the-modem-for-bridge-mode.php

SATA Problem please Help?

Can anyone help? I started my mac pro this afternoon, and one of my SATA Drives isn't showing itself on my desktop with the others!! I swapped bays with the other drive and it still only shows one. Any Ideas?

Since I got my MacPro I have used or tried six different HDs in it and one (only) of them is prone to not showing up (early Maxline lll 300 gb).
This has only happened just after I have moved it, and it has sometimes taken a reboot or three to show up. Once it does show up in its new position it is always OK thereafter.
One time I tried resetting the PRAM (restart holding down appleoption+PR till after the second chime). Can't remember now whether this actually fixed it but it would be worth trying, if nothing else is working. Or try booting into safe mode (restart holding down shift key).
Wasn't clear from your post if the drive not showing up was previuosly mounting OK and now isn't, or whether it is new and has never shown up.
Mike

Duplicate Users being Created - AD / OD Setup - Please Help

I am a little confused.
Our machines use AD authorisation, and in the past have always had force local home directories enabled. This means that we have dozens of user folders on each
machine. Although as they are logging in through the network, there are no user accounts in system preferences.
We have now enabled portable home directories, and excluded a bunch of file
types and folders. Which is working fine.
However I have noticed that some users do not have access to there previous
files and that there are now two User folders with nearly identical
usernames but one ends with a $.
So in the users folders there will be “dan” and “dan$” with “dan” containing
there old files. I would like them to have access to all there files from before
we switched on pHD's.
I'm sure this must be a common enough issue. Anyone else had this occur ?
Cheers
Dan

Some general content and computer management information if at all helpful!!
Section 1:
          -About authorizing and de-authorizing:
http://support.apple.com/kb/PH1730
          Prevent unprompted syncing of your iPod, iPhone, or iPad:
Mac- http://support.apple.com/kb/PH1764
Windows- http://support.apple.com/kb/PH1677
Section 2:
          -iOS how to transfer or sync content to your computer:
http://support.apple.com/kb/HT1296?viewlocale=en_US
          Transfer purchases from your iPod, iphone, or iPad to an authorized computer:
Mac- http://support.apple.com/kb/PH2554
Windows- http://support.apple.com/kb/PH2566?viewlocale=en_US
          iOS: Importing personal photos and videos from iOS devices to your computer:
http://support.apple.com/kb/HT4083
           Backing up, updating and restoring:
http://support.apple.com/kb/HT1414?viewlocale=en_US
          Downloading past purchases from the App Store, iBookstore, and iTunes store
http://support.apple.com/kb/HT2519

Network Setup, Please Help.

Hello there,
Decided to install Arch once again, but I'm totally stuck with network setup. I've tried many different combinations in the config files, but nothing at all seems to work. I know the device is working (with Windows), and my details are correct. Perhaps I've misplaced something.
On issuing a network restart, I receive a message saying "SIOCADDRT: No such device". A similar message is issued when the network stops. I can only ping my own IP, not even the router's.
Could anyone lend a hand? I'm pulling my hair out here!
Thanks.
Device: eth0
My IP: 192.168.1.64
Router IP: 192.168.1.1
grep | eth0
eth0: RTL8168b/8111b at 0xf881c000, 00:1d:7d:95:65:e9, IRQ 16
route -n This was different at some points, but I've played around with so many options that it's hard to keep track.
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
rc.conf
HOSTNAME="linty"
lo="lo 127.0.0.1"
eth0="eth0 192.168.1.64 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(lo eth0)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)
hosts
# I really wasn't sure what to do with this one.
127.0.0.1 localhost.localdomain localhost linty
resolv.conf
nameserver 208.67.222.222
nameserver 208.67.222.220

OK... let's do this.
Your configurations seems correct, so to start troubleshooting we first ping your router with ping 192.168.1.1 do you get an answer? If you do good if you do not then as root issue this command: mii-tool to find out what is your Nic card doing and let's go from there.
R.

[Other 865 Series] 865PE Neo3-F (SATA and PATA problems),please help,thx

Hi
I have MSI 865PE Neo3-F mainboard and I have a few little problems with Neo.
My first:
I have HDD Maxtor DiamondMax10 300GB,16MB cache,SATA.When I was installing Windows,(widows setup) it shows that HDD has only 131GB.BIOS shows 251GB.what does it mean?Not supported HDD or only 130GB for one partition?
My second:
I want to connect also P-ATA HDD,but BIOS don´t see him.
What would be IDE settings in BIOS and also jumper settings on PATA HDD and DVD when I want use:
SATA as Primary Master (system disk)
PATA as Secondary Master
DVD-ATA IDE as Secondary Slave
My last:
What I should installing when I want to use all advantages of SATA HDD and what would be BIOS settings?
PLEASE HELP IT IS URGENTLY,CAUSE I HAVE TO WORK TO MY SCHOOL
ANY HELP WOULD BE APPRECIATED.
Thank you

At the first thank you for your reply.
Yes it works.
Sorry I didn´t post my OS.My OS is XP (with SP2,now).
Configuration:
P4 Prescott 540J 3.2GHz,FSB800MHz,HT (enabled)
MSI 865PE Neo3-F
2x APACER 512MB DDR400 (Dual channel,slot 1 and 3)
ASUS FX5700 256MB
Maxtor DiamondMax10 300GB,16MB cache,7200rpm
DVD-RW Plextor 716AK
After installing Service Pack 2 windows shows that HDD has 300GB,but I created two partitions before (C:\ [30GB] and D:\ [100GB] in windows setup) and now (after install SP2 E:\ [170GB]) one partition in Windows.Problem how do I put together last two partitions (D:\ and E:\) to one partition?
so if I right understand after this settings in BIOS:
Native Mode
ATA Configuration - PATA only (or SATA-only)
SATA Keep enabled - yes
PATA Keep enabled - yes
PATA channel selection - both
and what about another two options in this menu?what are the settings?(somtehing about 1st channel and so on)
connections looks like that:
on IDE ATA100 cable from IDE1 will be connect HDD ATA100 as Master and DVD as slave?
on SATA cable from SATA1 will be connect HDD SATA?
How system knows which one from two Masters HDD is System disk?from Boot menu?
Is some page on the web where can I find closer explain of IDE (SATA) settings for MB MSI?
Sorry for questions,but I am working at the first time with SATA disk

MS-6741 sata setup PLEASE HELP!

Similar Messages

Maybe you are looking for