MS-6968 and SP2
Has anybody tried "MSI Bluetooth Driver only for WinXP SP2" with MS-6968? I wanna skip widcomm....
no, sorry.
Similar Messages
-
Exchange 2010 SP1 and SP2 are no longer supported.
Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
Support for 2010 SP1 and SP2 has ended.
Before posting a question, please ensure you are running at least 2010 SP3.
For more details:
http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
Support for 2010 SP1 and SP2 has ended.
Before posting a question, please ensure you are running at least 2010 SP3.
For more details:
http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Question about AUTOTRACE, SP2-0618 and SP2-0611
Good morning,
I wanted to look at the execution plan(s) for some sample queries. I did a little research using Google, found out about autotrace, plan_table, plustrace role and utlxplan. I followed the instructions I found but the result isn't quite as expected.
Here is an output of a freshly started session:
0 01:50 [SS1TB Attic-Z] [5G] [750M] Z:\Documentation\Oracle\
Oracle Concepts\Scripts>sqlplus hr/abc123
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 8 01:50:16 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select count(*) from plan_table;
COUNT(*)
2
SQL> set autotrace on
SP2-0618: Cannot find the Session Identifier. Check PLUSTRACE role is enabled
SP2-0611: Error enabling STATISTICS report
SQL> select count(*) from plan_table;
COUNT(*)
2
Execution Plan
Plan hash value: 3662021055
| Id | Operation | Name | Rows | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 3 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | | |
| 2 | TABLE ACCESS FULL| PLAN_TABLE | 2 | 3 (0)| 00:00:01 |
Note
- dynamic sampling used for this statement (level=2)
SQL>1. the first select is there to ensure I have a plan_table, that checks.
2. When I set autotrace on, I get SP2-0618 and SP2-0611 for reasons that I cannot figure out.
3. the second select is there to find out if the autotrace in step 2 had any effect. It did since now the explain plan is displayed.
The question is: if it is working (as step 3 demonstrates) then why I am getting those errors in step 2 ? and what do I have to do to not get those errors anymore ?
Thank you (again!) for your help,
John.
Note: I created the plustrace role, granted it select on v_$sesstat, v_$statname, v_$session, then I granted plustrace to hr. Was there something else needed ?Hi John,
It looks like that, for PLUSTRACE it is important for the user to be logged out when the role is granted otherwise, it looks like there is a part of the process that doesn't "stick".That's not just with the PLustrace role. Any role would be working when the next time the user is going to log in. Please see below where using two sessions, I shall grant a user some privs and would see whether its working for the user or not.
*Session1BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> create user john identified by john;
User created.
SQL> grant connect to john;
Grant succeeded.
SQL> create role dangerous ;
Role created.
SQL> grant drop any table,create any index to dangerous;
Grant succeeded.
SQL> conn john/john
Connected.
SQL> select * from session_privs;
PRIVILEGE
CREATE SESSIONSo far, what I did that I created a user John, granted him a direct priviledge. There is a role also that's prepared and would be granted to the user while still he being connected. See below, this is the second session,
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 8 15:33:09 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> grant dangerous to john;
Grant succeeded.I would check the available permissions for the user in the session. This command was entered in the first session where the user john was already connected.
SQL> /
PRIVILEGE
CREATE SESSIONYou can see that there is no change in the session privs. Now, let's disconnect and connect again,
SQL> disconn
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> conn john/john
Connected.
SQL> select * from session_privs;
PRIVILEGE
CREATE SESSION
DROP ANY TABLE
CREATE ANY INDEXAll he privs are active now for the user.
Now, the privs in the role, if would be updated, would be reflecting right away in the user's currently connected session. I added one more priv to the role in the 2nd session and it was coming in the 1st session, see below please,
session-2
SQL> grant alter any table to dangerous;
Grant succeeded.
SQL>
session-1
SQL> /
PRIVILEGE
CREATE SESSION
ALTER ANY TABLE
DROP ANY TABLE
CREATE ANY INDEX
SQL>I copied extra lines I guess, deleted them now.
Aman....
Edited by: Aman.... on Aug 8, 2010 3:56 PM -
IWS 6.0 SP1 and SP2 throwing startup messages on to console
iWS 6.0 SP1 and SP2 on HP-UX 11.0 are throwing the following messages on to the console constantly
iPlanet-WebServer-Enterprise/6.0SP1 B08/20/2001 01:46
[LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
startup: server started successfully
# [LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
startup: server started successfully[LS ls1] http://cdbmsw2.cdbms_rbi.com, port
80 ready to accept requests
startup: server started successfully
[LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
[LS ls1] http://cdbmsw2.cdbms_rbi.com, port 80 ready to accept requests
startup: server started successfully
can anybody tell the reasons
thanks in advance
regards
Ananda RaoAnanda,
If you're starting the server from the command line, this is normal behavior. All these messages will output to the console and logs. If you start this from the GUI interface, the output will go to the logs. -
Hello!
I've been a happy user of Photoshop for a long time, however, after I installed SP2 (WinXP Pro)the problems started.
I'm using Wacom Graphire 3, and whenever I try to draw in Photoshop CS2 it freezes. At first it lasts about three seconds, then it starts responding again, and after I draw a couple of lines it freezes again and won't come back at all. I tried using the mouse, if the tablet is causing the problem - didn't help. I also tried updating the tablet driver, didn't work either. So the problem has to be in Photoshop, or somewhere else in my computer.
I'd really appreciate any help concerning this matter, please tell me if you need any additional information.Since you only mention Photoshop as having a problem, this is almost
certainly, as you suspect, a monitor profile config problem.
Color profiles for individual monitors are configured in
Start>Settings>Control Panel>Display>Settings>(Advanced Button)>Color
Management.
In Settings, click on the monitor whose profile you want to verify before
clicking on the "Advanced..." button. I would start by adding and
defaulting the profile for the monitor that is causing problems.
The Microsoft XP color control panel applet makes setup easier, though it
is not really necessary. If the link below fails, google for keywords
Microsoft XP color control panel applet.
http://www.microsoft.com/downloads/details.aspx?FamilyID=1e33dca0-7721-43ca-9174-7f8d429fb b9e&displaylang=en -
I have installed SP2 for windows XP and since then there is a problem with theMS SQL server. The service manager is running but the default port 1433 for sql server doesn,t listen. I have checked it with an active port utility and I 've noticed that the port is closed.
Due to this fact a connection with the database fails and I keep receiving the error " Cannot a establish a socket for connection ".
Thank youTo open ports in the SP2 Windows Firewall just open "Windows Firewall" configuration window from Control Panel, click on the "exceptions" tab, click "add port", give it a name like "sql" and the port you're having trouble with, and then press ok.
It will appear in the list of services as whatever name you gave it. Make sure it's box is checked, click ok, and you're laughing.
If case this doesn't work then it's not just the windows firewall blocking the port that's the problem. In this case you can use the same configuration window to just disable windows firewall completely.
Hope this helps.
Robin. -
CR runtime SP1 and SP2 on WS 2003 and IIS 6 report is blank in reportviewer
Hi All,
Could you please help me, No image problem in following scenarios,
Using asp.net 3.5
WS 2003, IIS6, CR runtime 2008 with SP1 = > No images
WS 2003, IIS6, CRruntime 2008 with SP2 => No images
WS 2003, IIS6, CRruntime 2008(No SP) => Works allright.
Of-course I can downgrade but is there any workaround, to combination with SP2 or SP1.
Thank you.
Regards,
Sandeep Sharma
EDIT: Its not like no image but first page is empty, only toolbar is shown. when I export all data is shown in PDF.
Edited by: SSharma on Nov 2, 2009 3:30 PM
Edited by: SSharma on Nov 2, 2009 3:31 PMWell, I'll go along with something wrong. If you can give me precise steps in how to duplicate the issue. I would like you to also try one of our web samples from here;
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
I recommend vbnet_web_simplepreview and see if you can duplicate the issue with the sample app.
Remember that more than likely, you are not the only one running SP 1 and / or SP 2 and I do not see other reports of the issue you describe in these forums...
Ludek -
Satellite M30 keeps crashing after reinstall and SP2
hi,
Can someone please help me. I'm having trouble with my Sat M30. It is 2 yrs old and I've never had problems with it before. However, I recently had a crash and decided to reinstall from the recovery CD. upon reinstallation, I tried downloading service pack 2 and my computer keeps crashing. I have not installed any other software and still keep having this problem. This is very strange since sp2 worked perfectly on my laptop until the recent crashes. Any help would be greatly appreciated, I've reinstalled now for the third time and am extremely frustrated.
the error I recieved on crash was: ***stop: 0X000000f4 (0X00000003, 0X86152950, 0X86152Ac4, 0X805f9f88)
thanks very muchHi
Thats pity that it happens. Did you check the Microsoft Windows XP SP2 Update information on the Toshiba driver page? In the Sat M30 driver area you will find the document which describes what application must be updated to use the SP2.
I would recommend firstly checking this sheet before starting any SP2 installations. -
New installation and SP2 upgrade of 7.5 - Cannot create ActiveX component
Hi guys,
New installation (w/ SP2) on 64bit Server 2003. when attempting to reach Http://Server/OSOFT I'm receiving the following error -
Server Error in '/OSoft' Application.
Cannot create ActiveX component.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Cannot create ActiveX component.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Exception: Cannot create ActiveX component.]
Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName) +232
OSoft.Consumers.ZFP.WebBase.PageBase.GetZFPText(Int32 intID, String strParam1, String strParam2, String strParam3, String strParam4, String strParam5) +422
OSoft.Launch.Page_Load(Object sender, EventArgs e) +51
System.EventHandler.Invoke(Object sender, EventArgs e) +0
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I've tried the following note (which seems very similar to my issue) only relevant to 7. and it did not help.
1342140 - Cannot create ActiveX Component BPC 7 NW I've restarted the IIS and it did not help.
Please advise..
Thank you!Hi,
I had the same problem with my BPC 7 installation yesterday and followed all the proposed solutions in this thread with no luck. When I checked, the OSoftResSvrZFP_EN.dll was missing - you might be missing this too. Anyway, I solved it by running the BPC 7.0 server installation exe and then selected 'Repair'.
Regards,
Danny -
Atheros AR5004G and SP2 problem
I have been reading may issues on various forums and it seems a fix is needed.
We recently bought 4 laptops and upgraded to SP2. I tried the wireless out and it doesn't connect using DHCP. If I use a static IP it connects but something is not quite right as I cannot surf the Internet.
Are there any plans on a driver upgrade?Hi Andy
My Tecra is also updated with SP2 and I have no problem with wireless connection. In your case if there is any kind of wireless card functionality it can not be hardware problem just something with wireless settings. If the notebooks are new there is no necessary to make any driver update. Which notebook models do you have?
Do you use windows settings for wireless connection or some wireless client? I connect to internet using wireless router. Do you also use wireless router? Which connection type you use?
Like I said it can be something with connection settings. -
I like using WLW 8.1 sp2 but i've to deploy my EJBs to a WLS 8.1 sp1 server. Anyone
knows how can i tell the IDE to use different versions of ejbc or ejbgen?
Thanks.
Antonio.Seb,
I have a look at the document: http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf
I can see where to schedule the Crystal Reprot to run in the background and send out via email option.
However, I dont see how the report can be sent out from BOE server. Is there any setting need to be done so that BOE Server can send out the crystal report?
Please help, thank you. -
Difference between SP3 and SP2 ?
Hi,
Did anybody encountered any difference/problem in deploying the same EAR
with supporting jar files in SP2 and SP3 ?
I have an EAR (with 2 EJB jars and a WAR) that encloses additional
supporting jar libraries, referenced by the EJB and WAR using Class-Path in
the manifest file. But this seems to work in SP2 and NOT to work in SP3,
where I get ClassNotFoundError in the EJB/WAR, sign that it cannot find the
supporting jars.
I appreciate all the help you can provide ! Thanks !
EugenHi sunny46,
Microsoft has published an overview http://www.microsoft.com/downloads/details.aspx?FamilyID=68c48dad-bc34-40be-8d85 -6bb4f56f5110&DisplayLang=en and Wikipedia has also some infos http://en.wikipedia.org/wiki/Windows_XP
XP Home is only avaiable as a 32-bit version, the only avaiable 64-bit Windows XP is a XP Pro.
But don't try it since 64-bit XP is not supported by Apple.
Using XP SP2 or SP3 is fine with BootCamp.
However there are some reports to be found here, that there are difficulties when you have installed an XP SP3 and want to use the BootCamp Driver Update 2.1.
Personally I would get a XP SP2 and use the standalone SP3 update package.
Later on you can use the XP SP2 CD and the SP3 updater to make a slipstreamed XP SP3 installation CD yourself.
Hope it helps
Stefan -
I just got my Ipod and found out that Itunes only works with windows SP2. I dont want to install SP2 because im a bit of a gamer and some of my games arent compatible with it.. is it possible to get itunes and my ipod to work with SP1?
thanksBoth the iPod and ITunes version 4.9 works just fine with SP1.
-
I want to install winXP on my iMac. It has OS 10.7.2 and uses a 27" display. I will use Bootcamp and create a separate partion for winXP. Bootcamp instructions call for a single disk winXP CD with Service Pack 2 on it. My version has winXP on one disk and Service pack 2 on another. Will this be a problem? If it is, is there a solution?
Tnx...K6jpjIf you just bought an iMac a week ago new, it WILL NOT support XP unless XP is inside a virtual machine. End of story. You will need Windows 7 if you plan to run Windows natively on any Mac in 2011.
Used models will run XP, though--from the Intel inception in '06 through the middle part of 2010.
However, consider that Microsoft wants XP gone--and badly so--even as it is extending security hotfix support through April 2014. This gives you two years and four months before you have to throw down for whatever's current at that time.
Windows 7 will give you a much better experience (dare I say more Mac-like?) than XP, as it seems to be better organized. The Taskbar, for instance, has become more like the OS X Dock in that you can "pin" things to it in a straightforward manner, unlike XP's seldom-used Quick Launch traybar.
7's also built to take advantage of all the snazzy new hardware you now have.
But don't let me sell it to you. It's really your call.
Nate -
Is Zen7 SP1 Agent Backwards compatible with Zen6.5 SP1 and SP2?
Looking at deploying the Zen7 SP1 agent, but I'm not certain of any
caveats involved in doing so.
Netware 6.5 SP5 CPR, Zen6.5 SP2 on one server, SP1 on the other.
Thank you for your time,
TroyI think you need Zen7 on the servers if you're gonna use the Zen7 agent,
there is a compability matrix in the Zen7 docs on the Novell website. You
can use the Zen65 agent with Zen7 on the server.
"Troy H" <[email protected]> wrote in message
news:m9WPg.92$[email protected]..
> Looking at deploying the Zen7 SP1 agent, but I'm not certain of any
> caveats involved in doing so.
>
> Netware 6.5 SP5 CPR, Zen6.5 SP2 on one server, SP1 on the other.
>
> Thank you for your time,
> Troy
Maybe you are looking for
-
Can I transfer an unlimited data plan from one line to another?
When I upgraded my phone I lost my unlimited data. My wife and I are on a family plan. She still has unlimited data on her line, but rarely uses any data. Is it possible to shift her unlimited data to my line and my 2gb plan to her line?
-
Problem in storing JAPANESE character in DB 10g charset iso-2022-jp
All, I have problem in storing data in Db. I used page directive in JSP like <%@ page contentType="text/html; charset=iso-2022-jp"%> in jsp screen in will get JAPANESE character but in DB I found some JUNK but reteriving the same in jsp it shows corr
-
Is Metadata standard from camera maker to camera maker...
No lens data nor even a field for lens data comes up in Metadata whether I show "all" or "EXIF". I have "unknown" lens for every photo in the database. How can you edit fields or at least see what information is in the file to be viewed if allowed? T
-
When i try to download windows support software it wont download. what can i do?
i have a 2006 macbook running 10.6.8 snow leopard.i want to run boot camp but the windows support software wont download
-
How to revert 5.5 to 5.4?
hi i have just upgraded to 5.5 from 5.4.problem is that i am not getting any display even with new and old boot options from grub.even telnet rac-1 command failing to connect.i need some backup so that i can format it out for fresh install or i need