MS 7005 USB Drivers

Hi
I hope there is someone here that can help me with a little problem I have.
I have the MSI MS-7005 VER 1 motherboard and I use a Creative USB Modem blaster to connect to the net ... the problem is that the modem is disconnecting after 5 - 10 minutes all the time and I cant get it to stay online.
I talked to Creative Support and they say it's the USB drivers that is the problem but I cant find USB drivers anywhere... atleast not for the ms-7005 ???
Anyone know where to get the drivers ? or is there anyone who has had a simmilar problem and found out what the problem was ????
WinXP has the drivers in it but I just cant get the Sh** to work with these(more than 5-10 min that is).
Thanks
RTG

go to:
http://www.intel.com/support/chipsets/inf/
and get Intel® Chipset Software Installation Utility
also install service pack 2 of WinXP

Similar Messages

64 Bit Windows7/8/8.1 USB drivers for Palm Desktop

Thanks to the great folks over at Aceeca.com (makers of NEW PalmOS Garnet devices), USB drivers for 64bit Vista, Windows 7, and Win 8 operating systems are available. There are many users reporting Palm Desktop 4.x is also working.
I have synced my TX to my Vista64 bit laptop, and Windows 8.1 HP Spectre X2 hybrid successfully via my USB cable.
The drivers are located here:
Aceeca Driver Downloads
Installation instructions (from Aceeca) for Windows 7 are included in the download.
Basic instructions:
1. Download the drivers and Extract them to the same folder. Remember the folder you extracted them to.
2. Try to HotSync your device. It will fail.
3. Open the Device Manager, and look for the Yellow Triangle next to either "Acceca" or "Palm Device" under "Other devices".
4. Right-click on the device, and choose "Update Driver Software".
5. Choose "Browse My Computer for Software" and direct it to the folder you extracted the Aceeca drivers to.
6. Choose "Next" at the driver file location window, and then tell it to "Always trust software from Aceeca Ltd." then click the "Install" button.
7. I received an error message (Vista64) that told me "The drivers were installed but the device couldn't be opened." I saw that my TX had timed out and went to sleep. I tried a HotSync and it worked!!!
Good luck!
NOTE: Palm Desktop 6.22 may only show Media and Install. Here's how to fix that:
If Palm Desktop 6.2.2 only shows Media and Install, try this: Right-click on the shortcut for Palm Desktop, then choose "Run as Administrator". The ther modules should appear.
To make Palm Desktop Run as Administrator every time in Windows 8/8.1:
Close Palm Desktop, if open. (This is a very important thing to always do when using 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)
Right Click on the Palm Desktop Icon in the Metro screen, then choose "Open File Location". You will now see the actual file for the shortcut.
Right-click on the "Palm Desktop" shortcut file, then Properties. Now pick the Compatibility Tab at the top.
At the bottom of the Compatibility Tab is a checkbox: "Run this Program as Administrator", Click OK .
Try opening Palm Desktop, all the parts should appear. You may see a box open when you close the program asking "Did the program run correctly?" I picked "Yes", and it's been working fine since then!
If you are using a much older PalmOS device and want to try using Palm Desktop 4.x, you will need this additional patch from Pimlico Software:
Palm HotSync Setup
WyreNut
Forum member bobboffin has added this post:
"After attempting your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step quite difficult. This happened to me, and after some investigation I discovered the following tip that allows Device Manager to show hidden and non-present devices.
Open up Notepad and paste the following two lines into it:
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
Save it as SetDev.bat into My Documents.
Open My Documents in Windows Explorer and double click on SetDev.bat. Device Manager should open.
In the View menu select Show Hidden Devices.
You may now see under the Other heading the failed device with a yellow triangle against it.
You can now proceed to install the drivers per the instructions.
Note that the driver supports most Palm OS versions. I'm actually using an Aceeca Meazura 1000 ruggedized PDA running OS 4.1 --- bobboffin"
Hope this helps!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
This question was solved.
View Solution.

Thank you so much. I was thoroughly disappointed to see that the support telephone for paid support had been discontinued. I thought I would need to replace my (ancient but serviceable) Z22.
I followed the instructions listed here and am very happy to report that I completed a sync!
Thanks again.

Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?

If you want the shuffle to be always visible in Windows (outside of iTunes), you need to Enable disk use.
Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, select the Summary tab. You should see a checkbox that says Enable disk use. Check it and click Apply.
NOTE: If disk use is enabled, you have to Eject the shuffle in iTunes, BEFORE you physically disconnect it. If disk use is NOT enabled, you can disconnect the shuffle at any time, as long as iTunes is not doing something with it at that moment (such as syncing); the shuffle's light will then be blinking (to indicate DO NOT DISCONNECT).
So, unless you want to use the shuffle like a USB flash drive (carry random files on it), you may want to NOT Enable disk use.

Where are the USB drivers for my MSI board??

Got a new MSI board- VIA KM266 Pro + 8237 Chipset Based. I installed my new AMD 2300+, WIN XP, etc. I have a USB printer. Got everything installed, printed a test page, and then a document. Everything fine. THEN, I go to use my printer a few days later and it says "Printer not responding". So I troubleshoot, and then go into Device Manager and notice there are no USB devices installed. The new MSI board has 4 USB ports on it. The CD that came with the board has no USB drivers on it (I checked). WIN XP has no USB drivers. What is going on? How do I get the USB ports to work? Am I looking at it all wrong? Appreciate any help out there!

Quote
Stu: He started his thread saying "Got a new MSI board- VIA KM266 Pro + 8237 Chipset Based."
osnavi, that is true. after searching through MSI website, i think this is the board he is referring to, KM3M:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=611
sonic, what is your USB printer?

Windows 7 64bit & Aceeca USB Drivers & PdaNet

Has anyone been successful in using the Aceeca USB drivers with PdaNet 4.1.2 on Windows 7 64bit?
I believe this should work, but it doesn't. I have place two support messages into June Fabrics about this over the last two weeks and got no response. The June Fabrics FAQ says:
Does PdaNet support 64 bit system? On 64 bit Vista I received installation error "UpdateDriverForPlugAndPlayDevices err=-536870347".
PdaNet does not work on 64 bit system due to lack of 64 bit USB support from Palm's HotSync Manager.
My device is a Treo 755p. I can successfully HotSync via both bluetooth and USB/64bit-Aceeca on Windows 7 64bit. I have got a trial version of USBModem by Mobile-Stream.com to work for Internet tethering, but I just don't understand why PdaNet won't install given the installed Aceeca drivers and June Fabrics FAQ.
Post relates to: Treo 755p (Verizon)

>got a trial version of USBModem by Mobile-Stream.com to work
Can you provide a link to a detail description of how to get it to work -- I can't seem to do it.
Do you need the 20/month additional option from Verizon?

XP SP3: USB-drivers won't install

I just got myself a 8900 Curve and want to connect it to my PC to transfer data, Sync it, update the OS...
Mass Storage Device through the BB works perfectly, but the PC Sync Tool not.
Windows XP SP3 detects New Hardware but can't find drivers.
In Device Manager there's an USB Device with exclamation mark.
I tried installing (and uninstalling) from Desktop Manager 4.6 to 6.0 and even installed the seperate USB-drivers, but no luck.
I tried pointing out to the C:\Program Files\Common Files\Research In Motion\USB Drivers, Windows can't find the appropriate drivers.
What oh what can I do?
I searched through this forum but no luck finding an answer.

Hi Dman,
When trying to install the drivers, are there any errors when it stops the install?
Has this printer worked on any other systems, including your OS X machine?

My comp with Windows7 doesn´t recognise iPhone 5c. I reinstalled USB drivers,iTunes,restarted both devices but without positive result. iPad is recognised on the same comp without problems. Could me somebody help?

My comp with Windows7 doesn´t recognise iPhone 5c. I reinstalled USB drivers,iTunes,restarted both devices but without positive result. iPad is recognised on the same comp without problems. Could me somebody help?

Hi there tsubert,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Installing LR 3.6 trashed all USB drivers; now installed LR3.5 won't open. Help!

Downloaded LR 3.6 yesterday. Installed. (To upgrade from LR 3.5). It damaged all USB drivers on my PC (XP Pro 32 bit). Still working with Dell tech support to resolve. Now installed LR 3.5 will not open. After system restore to day before yesterday, message that "Adobe AIR is damaged" . What is AIR??? How do I get LR back up & running right?

Adobe AIR is a cross-operating system runtime environment. Try downloading and installing it from here.
Beat

New ipad USB drivers for pc running on win7

Error message when downloading USB drivers for new iPad for win 7 (64 bits)

My husband's laptop which is at least 3 years older than mine has not problem with charging or recognizing my IPAD. So I don't think the USB ports have anything to do with this problem. What I see is that the PC wants to load MTP USB driver which fails. I have the Apple Mobile Device driver installed and activated. My computer does not see the IPAD but Itunes does. How do get the PC to recognize the apple mobile device driver before it tries to download the MTP USB driver? I am going to try the last suggestion from Diavonex to see if it will work. This is sounding more and more like a Windows problem. BTW both my and my husband's laptops are Dell so I might try looking there also. Wish I had an answer.

64-Bit USB Drivers: WHEN????????????

See message subject -- it's all there. Don't tell me about "Bluetooth" or "WiFi" workarounds. Tell me WHEN there will be 64-bit USB drivers.
Post relates to: Palm TX

I've finally solved the 64-bit USB Driver problem with my Palm T|X. I can now sync my PDA with WinXP Pro /x64 and Vista /x64 with no problems or by using funky work-arounds. Just plug it in to the USB port and away she goes -- recognized instantly!
How did I do it? Not with anything from Palm!
Bought an HP iPAQ 210 that runs under Windows Mobile Classic, version 6. Amazing how there's a 64-bit ActiveSync made for WinXP /x64. Does a number of things in addition to being able to sync using a USB cord . . . Bluetooth 2.0 (the T|X is the slower 1.0 or 1.1) . . . 802.11g (T|X is the slower 802.11b) . . . and it has a VGA 640x480 screen. Yes, it goes for a higher price than a T|X, but wouldn't even have been looking at other PDAs if there had been 64-bit WinXP and Vista drivers for it along with the loss of some features in the latest Palm Desktop (released finally for Vista). The T|X is a fine PDA, except . . . no 64-bit drivers . . . nothing about when they might appear . . . for years now . . . stone silence from Palm about it . . . and quite seriously, it's my sole reason for looking for a different PDA and dispensing with the T|X.

ERROR # 1439. Not able to update USB drivers

OK So I got the error message 1439. Went to Apple Support here first.
http://support.apple.com/kb/TS1372
This in turn told me to go here:
http://support.apple.com/kb/TS1538
to update my USB drivers.
So I am going through the steps and I come to "The Hardware Update Wizard", on my computer. Well my "The Hardware Update Wizard" is not the same as the one in the steps. I am supposed to let Windows search the internet for the correct drivers and they will be automatically installed. But my "Hardware Wizard" only allows me to search my computer or put in an Installation CD to update drivers. It does not allow me to connect to Windows Update to find the updated drivers. What the heck is going on?
My system is
Dell Dememsion XPS
Windows XPS
Home Edition Version 2002 SP3

Have you tried to connect your ipod directly with your computer i.e. without USB hub ?

Problems under Windows USB Drivers (Apple Wired Keyboard)

Hello guys,
somehow I have some issues after installing Windows 7 regarding the USB Drivers: if I install the "Intel(R) 7 Series/C216 Chipset Family USB 3.0 eXtensible Host Controller Installation Disk - 1E31"-drivers, doesn't matter if I do it from Intel's or Apple's webpage, the USB Ports of my Apple Wired Keyboard (A1243) don't work anymore; it says "Not enough power". I have already tried that workaround found on the web, by increasing the output mAh through regedit, but the point is that after installing these drivers, the section "Power Management" isn't shown anymore in the device manager.
I'm having a Macbook Pro Late 2012 with Retina display

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage

Windows 8.1 Task Sequence is picking the wrong USB drivers

I have a Windows 8.1 task sequence that hasn't had any driver issues on all the other desktops I've tested. Except the HP Compaq 6000 Pro. None of the USB drivers are working correctly unless I select Update Driver Software -> Browse my computer for
driver software -> Let me pick from a list of device drivers on my computer then a list of 4 driver options appear. I can select any of them and they all work. I can't seem to figure out how to get it to select of those drivers by default. I've tried building
a driver package and also a capture with the correct drivers selected. Neither have worked. Does anyone have any suggestions?

Hi,
Please have a look on the following thread. It might give you some hints.
"use
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d to 'grab' the drivers you've succesfully installed into your hardware and inject those to ConfigMgr. Create a driver package and use "Apply Driver Package" -step in your task sequence
with WMI conditions so that this driver package only applies on to the right make/model."
http://social.technet.microsoft.com/Forums/en-US/9094d303-d01d-44fa-801c-65578122c8bd/how-do-i-stop-windows-from-downloading-drivers-from-windows-updatewsus-during-operating-system?forum=configmanagerosd
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

USB drivers for Ellipsis 7 tablet ...

Does anyone know where I can find the USB drivers for my Ellipsis 7, needed for development work?

Verizon Ellipsis 7 Drivers

Safari does not allow to install USB drivers downloaded from certain websites

Safari does not allow to install USB drivers from http://www.flymaster.net/Products/LIVE/tabid/143/Default.aspx
I don't know what to do to allow downloads from www.flymaster.net to be installed.

Welcome to Apple Support Communities
Can you download the driver properly or the error happens while the driver is being downloaded? As you are saying that you can't install the driver, check this website > http://support.apple.com/kb/HT5290

MS 7005 USB Drivers

Similar Messages

Maybe you are looking for