MS-7222 CPU support
I have MS-7222 v2 (PM8PM-V) mobo(Bios 3.3)Chipset VIA P4M800 Pro, i have p4 3.06 GHZ on it and i want change the cpu. I wonder if that mobo support core 2 duo cpus? E4700 or celeron E3300?. If not support so which is the best cpu i can use on that mobo? Thanks in advance!
Quote from: go_for on 15-November-14, 05:53:16
I do not think any E-series Dual Core CPUs will work.
The best it will take is the dual core D 960 Presler, specifically the 95Watt tdp model(not the 130W).
http://www.cpu-world.com/CPUs/Pentium_D/Intel-Pentium%20D%20960%20HH80553PG1044M%20%28BX80553960%29.html
Modding the BIOS and having it successfully updated on board is possible, but the outcome of success when using the new processor is minimal, IMO. In this case the E-series lack support with PCB 3.1, seems.
Intel Pentium D :
http://en.wikipedia.org/wiki/Pentium_D
Thanks for advise, there is no more choice. Modding the bios or using Pentium D. C2D isn't supported by PCP 2.01 but also P4M800 Pro chipset supports some of C2D's. If i get a supported C2D i will mod the bios, so will see if gonna success.
Similar Messages
-
Maximum Athlon XP CPU support ; enter yours !
I’ve a K7T Turbo Limited Edition (3.X with Bios 3.4) but i cdo not understand what is the maximum CPU supported; In fact :
The manual says Athlon 1.3Ghz
The Board product page says Athlon XP 2Ghz
The CPU support page says Athlon XP 1.8Ghz (the OK stops there)
The Bios page says the ver. 3.3 bios supports XP up to 2Ghz
It’s a little messy, isn’t it ?Quote
Originally posted by Bas
Hi,
The K7T Turbo supports upto the XP-1800....
Any higher can work, but you might blow the board because of the powerconsumption of these CPU's....
As the BIOS for the K7T Turbo2 is the same, but this board supports higher CPU's, it's a bit confusing that you see the above CPU's listed...
That makes no sense as the power consumtion of the xp 2000+ is lower (70 watts max according to amd tech docs) that the 1.4 gig tbird cpu(72 watts max according to amds techdocs) -
K9N4 SLI - Lack of 125W CPU Support
Hello,
Just wondering why does this board not support any 125W CPU's?
I was looking at getting one of these boards to throw in a 6000 X2 but according to the website, this board only supports the 89W version, which is unavailable where I am.
I've seen this CPU supported on a Gigabyte board using the nforce 4 SLI Chipset, which the nforce 500 SLI is based off or rebadged from.
Thank you.I'm sorry, i really don't care if the board goes up in smoke. As a matter of fact, this board is one of the worst decisions i have made. Don't get me wrong, I will always stick with MSI, but this particular model of a board seems to have constant issues with a lot of other people. particularly with it not posting right out of the box. i myself had this issue 2 or 3 times with the same model board and according to my findings here, and in many other forums, so do a lot of other people. so really, who cares if the damn thing goes up in smoke? it was only $80.00 and in the meantime I have a good setup going on. you won't hear me complaining about it frying, i'll just buy a different model.
-
FM2-A75IA-E53 CPU supported list is missing
I read the subject about how to know the CPU supported by the Motherboards but in the case of FM2-A75IA-E53 motherboard there is no SUPPORT -> CPU SUPPORT in the product page.
I think (hope) they are revamping them because they are definatly missing.
Contact msi for this information for now.
>>How to contact MSI.<< -
HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS
HI PLZ HELP I WANT TO UPGRADE TO SSD I ODNT KNOW WHETHER MY BOARD AND CPU SUPPORTS
COMP
Compaq Presario CQ42-372TU Notebook
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCac=...
PLZ ANY BODY HELP MEEEEEEEE
This question was solved.
View Solution.You can upgrade to an SSD.
The simplest method is to use an SSD like the Corsair Force 3 and be sure that you purchase the migration kit.
The migration kit comes with cloning software and a usb to SATA/power cable that connects to the new SSD.
It is recommended that you purchase and SSD that is about 256 GB in capacity if you can find one that is affordable.
SSD with migration kit options in a search that I did.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
GX700 bios 1.22 cpu support???
Does anyone have a full list of GX700 bios 1.22 CPU-support?
I have asked msi support directly, but they do not want to give me direct answer.
Just wondering whether I can bring my gx700 closer to modern laptops with a cpu upgrade (most likely X7900 or T9500, if they are supported)Quote from: Svet on 16-February-12, 18:08:03
since msi support can't answer dunno then..
here is some QVL related to memory on GX700:
" Yes, GX700 supports 4GB memory max, but not all the memory can be used on it, please refer to the Approved Memory Vendor list as below:
Vendor--Model Name--Type, Frequency--Size--Chipset
KINGSTON--KVR667D2S5--DDRII 667--2GB--MICRON
Transcend--JM467Q643A-6-DDRII 667--512MB--RJETRAM
Transcend--TS128MSQ64V6J--DDRII 667--1GB--SAMSUNG
Transcend--TS128MSQ64V6J--DDRII 667--1GB--HYNIX
Transcend--TS256MSQ64V6U--DDRII 667--2GB--MICRON
Transcend--TS256MSQ64V6U--DDRII 667--2GB--SAMSUNG
TWINMOS--8D-23KN5MHBTP--DDRII 667--1GB--HYNIX
UNIFOSA--GU331G0AJEPN6E20--DDRII 667--1GB--ELPIDA
WALTON--AS51082-667P015--DDRII 667--512MB--ELPIDA
WALTON--AS1G082-667P015--DDRII 667--1GB--ELPIDA
Transcend--TS256MSQ64V6U + TS128MSQ64V6J--DDRII 667--3GB--MICRON + RJETRAM "
About CPU support found this:
http://www.avadirect.com/msi-configurator.asp?PRID=10877
GX700:
Support Intel® Penryn FSB800 CPU T8100/T8300/T9300/T9500
Support Intel® Merom FSB800 CPU T7100/7300/7500/7700
Thank you
I have tried several memory types and all of them have worked so far.
I think that I found that Avadirect too, and it suggests that T9500 will work with MSI bios.. I am just not sure whether I can trust that source. Maybe I will buy a cheap T9500 from ebay if I happen to find one.
Official information from Intel states that:
PM965 Chipset supports also X7800/X7900/X9000, but I guess that BIOS is the restricting factor in this case. -
Hi all I'm thinking to buy mobo B85M-G43 along with celeron g1820.
The problem is that in CPU support list there is no celerons but in spec page I see this
Supports 4th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors for LGA 1150 socket
It is intresting because all other mobos with b85 seems to have celeron suppot in official msi cpu list.
If there is some tech guy form msi in this forum could you check this?
And if this mobo doesn't support this cpu what all you could recommend with similar price and features?
ThanksIf no one here can assist at this stage, then you can always address your query here. http://us.msi.com/service/PreSaleForm/
-
Hello,
I bought an used M55e 9637-BN5 computer. I would like to change the original CPU (E2140) to an E5200.
I can't find a complete CPU support list. Is this (E5200) CPU supported by my M55e?
Thank you for your replies!Your machine has the 946GZ chipset in it, which allows use of Core 2 Duo processors, Just not sure the E5200 Wolfdale you have identified will work. Conroe definately will work, up to an E6700. Enter your machine into the quick path box on the support home page, and find the Hardware Maintenance Manual, it will tell you all iterations of your machine and which processor shipped with it. That will give you an indication of which processors will work.
-
When the indesign will finally support multi-core processors?????? It is tragic that adobe dont have any support for multi-core cpu and that this products cost thousends $$$$$!!!!!!!!!!!!!!! Only premiere and some photoshop function support multi-core cpu.
If you are good freelancer you can get money spent on CS back in a month. So I would not call this software expensive. What concerns multi threaded cpu support I believe that programming tools as well as operating systems need to evolve. I am sure that we will get better support in this matter in close future.
-
looked at the list at msi website , didn't see it there yet.
anyone know if the new 955 denebs will work on this with the 3.3 bios?Quote from: Henry on 11-May-09, 05:51:46
What happened now? I just looked and Phenoms are all gone from the CPU support list.
right...all phenom are removed -
I have been trying to access the cpu support list and it keeps timing out. Curious if anyone else is having problems. Is this info available any where else? Thanks.
Quote from: Fredrik on 18-September-09, 08:08:56
From googling; the comments to the right may be useful reading:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130161
OK someone got it to work, but had to adjust the VCORE before using it, I consider something official when I don't have to do that, there are a lot of users out there that don't overclock, I'm one of them, I know how and I've overclocked this 7750 to 3.4GHz stable with stock cooling, but I'm happy with 2.7GHz stock for now. I'll be upgrading to the the 980a - G65 soon anyway, not going to blow money on a 955 now, will wait til both the board and CPU come down in price. -
MOVED: 880GMA-E45 Fx-6300 CPU support?
This topic has been moved to MSI AMD boards.
https://forum-en.msi.com/index.php?topic=184599.0Quote from: Pilotito on 05-November-14, 04:30:23
I've come across to a site that is some sort of official announcement from MSi regarding the upgrade of 'old' motherboards to the AM3+ standards. Since I cannot post external links, I'll just post what it says:
Supported Mainboards
AM3+ Compatible Mainboard
890FXA-GD70 880GMS-E35
890FXA-GD65 870A-G54
890GXM-G65 870A-G54H
880GMA-E55 870A-G46
880GMA-E35 760GM-P33
I have a 880GMA-E45 and according to these news, I'm able to download a BIOS update and make it compatible with AM3+ CPUs.
According to the old announcement you found your board were already not mentioned. As the cpu support chart leads to the same conclusion AM3+ cpus are not supported. Besides these boards would anyway just support old Bulldozer FX cpus not the newer Vishera cpus (like FX6300). -
MSI Prescott CPU Support List (FSB800, 1M L2)
finally...
http://www.xbitlabs.com/news/mainboards/display/20031215133027.html
and
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=proscottAt last, a clear answer from MSI, after 6 months of waiting
MSI Prescott CPU Support List (FSB800, 1M L2)
Chipset_Model Board_Name BIOS_Version Prescott_Support
Intel® 875P 875P Neo-LSR/-FIS2R AMI 1.8 YES
Intel® 865PE 865PE Neo2-PS/-PLS/-PFISR AMI 3.2 YES
Intel® 865PE 865PE Neo2-S/-LS/-FIS2R AMI 1.9 YES
MSI P4 Extreme Edition Support List (FSB800, 2M L3)
Chipset_Model Board_Name BIOS_Version Prescott_Support
Intel® 875P 875P Neo-LSR/-FIS2R AMI 1.8 YES
Intel® 865PE 865PE Neo2-PS/-PLS/-PFISR AMI 3.2 YES
Intel® 865PE 865PE Neo2-S/-LS/-FIS2R AMI 1.9 YES
I guess Intel has the final samples with the manufacturers ...
Now to save up for the CPU upgrade, the probable PSU upgrade, probably a better HSF or CPU cooling system, memory, etc...
But how can I test my system upgrade readiness before the 1 yr warranty expires? -
CPU support for KT3 Ultra2?
Mainboard manual says that fastest supported CPU is AMD XP 2200+ 1,8GHz (=Thoroughbred).
Board homepage says that 2700+ is the fastest supported CPU
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=341
CPU Support page says that fastest supported CPU is XP 3000+ 333MHz:http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=341
So the question is which is the fastest supported CPU? I'd like to get a confirmation before buying any...http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=11 says that BIOS update 6380ev57.exe supports "AMD Barton XP3000+ (FSB333) CPU (For KT3 Ultra2 Only)" and warns that "This BIOS is intended for MS-6380E PCB with KT266A & KT333 chipset. K7T266 Pro2 & K7T266 Pro2-RU don't use the same.
Go to the URL and make double sure that you are looking at the correct motherboard version.
Before you consider a BIOS flash, read the approproate section in this forum. -
785GTM-E45 CPU support COMPLETELY MISSING
Howdy all!
I checked the MSI website, I checked this forum, I googled the whole Internet but I cant find a list of working processors with the MB in subj.
http://www.msi.com/service/cpu-support/ leads to a "Not found" page when selecting the MB from the menus. http://www.cpu-upgrade.com/mb-MSI/785GTM-E45.html proposes a list of supported CPUs as of BIOS v8.0, but I read here that the BIOS version is currently (?) 8.6.
Where the good 'ol table with which processor is supported starting from which BIOS version has gone? Why the BIOS files are not listed in the "Downloads" section along with a description of the new features? Why this MB has been forgotten by MSI?
Thanks.Try here.
http://global.msi.eu/index.php?func=prodcpusupport&maincat_no=1&cat2_no=&cat3_no=&prod_no=1883
Maybe you are looking for
-
when I follow the instruction on importing bookmarks from IE 8 I do not see any action that they are being imported.
-
RE: (forte-users) What could have caused the StopWatch classto r eturn
Attila 1. Ops - I DO instantiate it as follows: [snip] sw : StopWatch = new; [snip] I missed the "= new" in the orig mail message (cut/past from wrong workspace). 2. LogWriter(deltaT:integer, t1:DateTimeData, t2:DateTimeData) [snip] task.part.logmgr.
-
Getting a csv file in server from client
Hi, This is my first mail to the forum. I hope some one would help me to find a solution for me. I got a xyz . csv file in my server. I want to get that file and save it in my client (anywhere)having the same file type. Gimme source code if you have.
-
SystemD hangs on shutdown at least 1 of /etc /var /tmp fails to umount
SystemD is nice, it just most of the time fails to do a clean shutdown. Causing really long hangs. http://pastebin.com/raw.php?i=eqRRixQm Scroll down to the end to see what is hapenning. dec 30 15:23:28 Alpha umount[1522]: umount: /var: target is bus
-
Open project and NOT have it added to 'open recent' menu?
It would be great to be able to browse thru several projects without affecting the 'open recent' menu. Is this possible with 3.0.2?