MS-7265 bootup without attached VGA/DVI cable

Hi,
I am unable to boot-up my MS-7265 board without attached VGA/DVI cable (this cable must be connected to monitor also). I am using this board for home server and I have no additional monitor. In manual is nothing about this requirement. Please help me.
Thanks

This works http://soerennielsen.dk/mod/VGAdummy/index_en.php

Similar Messages

VGA/DVI cable - wanting to use two monitors.

I got a VGA/DVI cable to connect the VGA port on my LCD TV to the DVI port on my desktop computer. I'm trying to use 2 monitors on my computer which has both a VGA and DVI port. My regular monitor was already on, and the computer detected the TV as a monitor but the TV wouldn't detect a signal. I had the TV on the VGA/PC setting. The cable was a return item so it might be defective. I was wondering if there's anything else I could try to get it to work?

LadyElan wrote:
This is what I was looking at: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&docname=c00377019&dlc=en&lc=en
My computer's DVI port doesn't allow for the contacts above and below the flat blade like the DVI-I and DVI-A connectors in the picture. The cable that I got does have those contacts.
Ooooooh. So your computer may be one of the rare animals that doesn't have a DVI-I output, only DVI-D.
Since your TV has HDMI inputs, this is the way to go. Get a DVI-to-HDMI cable. It will provide higher quality than VGA and is USUALLY easier to use, I've never had video timing/resolution support issues with HDMI. (However, every computer I own has an Nvidia graphics card - the story may be different for ATI or Intel graphics!)
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Connecting HP Photosmart Plus B209a-m to a new WiFi connection without attaching the printer cable

Hi All,
I have recently changed my ISP and so new WiFi network has been set up at home.
Now I want my printer (HP Photosmart Plus B209a-m) to connect to the new network.
Is there a way I do this without having to attach a printer cable between my laptop and the printer?
Thanks

Yes, on the front of the printer: Setup > Wireless > Restore Defaults.
Now on your computer, in the HP folder, run the Printer Setup and Software to add the printer to your new network.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

TV & monitor connected via DVI to VGA & DVI cable. Wont display

I have my TV & monitor connected to my mini via DVI(input) to> VGA(output) & DVI(output) splitter cable. I cant get both tv and monitor to work at the same time only one or the other. How can I get this to work?
Note: I dont want a continuous display, I just want one to show the same as the other. If there both plugged in why dont they both work?

The answer to your question would require having a block diagram of the mini's graphics sub-system. If the DAC (digital-to-analog converter) behind the VGA port is just driven from the same output as the TMDS transmitter behind the DVI port, then I agree it would be possible that both could output the same screen simultaneously. But if the VGA and DVI ports are treated as seperate channels all the way back to video memory, then likely one would be prioritized over the other, only one could be active, and they would not be able to output simultaneously.
Another potential problem is that TVs and computer monitors generally want to run at very different formats and they require different signal types to be happy. A TV will want an interlaced output whereas a computer monitor will not. And a TV will want a very low resolution, like 640 x 480, whereas a computer monitor will be happiest at a much higer resolution.
I hope for you that someone else has this working and chimes in with some practical advice. I try to avoid making posts where I have no practical advice to offer and only bad news, but in this case I thought you might want to know about some potential barriers to success. Good luck.

VGA / DVI cable

does either actually come in the box?
i didnt get one with my tv, so im wondering if i need to go buy one?
thanks

merci

TelePresence VGA to DVI cable and conduit

We have a new CTS-1300 system with a presentation cable which has a VGA connector on the user side and a DVI connector on the codec side. Currently the room has a 1 1/2 inch conduit installed under the floor between the conference table and codec. The VGA to DVI cable that comes with the TelePresence system will not fit through the conduit so I would like to purchase a cable that has no end on it and pull it through the conduit then install the VGA connector. Tripp Lite makes a cable similar to what we need called the Easy Pull but the cable ends are either both VGA or both DVI. We might be able to find an adapter for one of the ends but that just adds another point of possible failure. Has anyone found a company where they sell a cable similar to the Tripp Lite Easy Pull that is factory made with a VGA on one side and DVI on the other? One other thing to consider is the Cisco cable contains "mini" style audio connectors attached to it as well where the audio appears to be directly connected to the DVI connector whereas the VGA audio looks like it is coming out of the cable bundle.
http://www.tripplite.com/en/products/product-series.cfm?txtSeriesID=126&EID=32

Thank you for the information. I no longer work at that company where the installation occurred so I can't test it. But this information will be useful for future installations if I run into the issue again.

Going from DVI to DVI cable from VGA to DVI cable problem

Got a mini with the VGA adapter to DVI working with no problem. When I decided to hook up a DVI to DVI cable, I got no picture. I had to reach behind the mini, press the power button to put it to sleep, then press the power button again to wake up the mini again to get a picture. The monitor is a 20.1 inch AOC monitor. The picture is sharp in both cases. The DVI to DVI setup is slightly smoother.

After I reboot I still get no picture. I have to reach behind the mini, press the power button to put it to sleep, then press the power button again to wake up the mini again to get a picture.

Yoga 13 HDMI connection to VGA or DVI cable

Hi, does anyone know what kind of cable can support connecting the Ideapad Yoga 13's HDMI port to an external monitor with either a VGA or DVI connection? Maybe provide a link to Amazon to a page with a cable that supports this? Does it need anything more than the cable itself like a converter or something? Thanks.
Solved!
Go to Solution.

hi ScoobyDoo,
Welcome to Lenovo Forums!
That is going to be a Digital from the yoga to an analog VGA/DVI.
this kind of conversion does not require a transcoder. so you can go ahead with Cable Coverters only.
Here are some you might want to check:
StarTech 6ft HDMI to DVI-D Video Cable M/M
HDMI to VGA Adapter
Black HDMI Input to VGA Adapter Converter For PC Laptop
You can check this out on how to switch the display.
http://windows.microsoft.com/en-us/windows-8/multiple-monitors#1TC=t1
Audio transfer will not work with this kind of conversion Normal HDMI out to HDMI in will transfer both Audio and Video to a TV.
Hope this helps,
Cheers!!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Spare DVI to VGA presentation cables for SX20

hi All,
I would like to have a spare DVI to VGA presentation cables for SX20, I managed to searched the Part number is "CAB-DVI-VGA-3.5MM - SX20 3.5mm", but I cannot confirm, because I suppose the cable should be shipped with SX20, when I created a BOM for "CTS-SX20-PHD12X-K9", I thought I was able to find it in the option list, but I am not. So I was wondering that the part number is right for SX20 or not...

As discussed previously in these forums (see this thread) - you'll find it much simpler and cheaper to buy a DVI-VGA cable and a seperate 3.5mm audio cable from your local electronics supplier. These can then be purchased in lengths that are more suitable for your purpose as well (so you don't have to worry about 6m of cable if you don't need that much, or can get longer if you need that too). YOu can then make these two cables a "single cable" using cable ties, or snakeskin wrapping them together (or any other way you deem appropriate).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Iphone cable to vga, dvi or s-video

i am building a video installation and i would like to run the video off my iphone, but the projector that was donated only has an s-video, vga, dvi-d and single video output. the budget it blown, so i cant afford a new projector, does anyone of a cable that can connect from iphone to vga or dvi.
appreciate the help
/brian

I don't know of any off the top of my head, I'd have to look around. If I find anything I'll let you know. Even if you could get an adapter for iphone to vga, dvi-d, or s-video, you won't have any sound, those formats only support video.
One way you could do it is by connecting a computer to it with iTunes installed that is connected to the projector. You can then hook your iPhone up to it, or if you have a wireless network installed you can download the remote application for the iPhone to control your iTunes library remotely if you are connected to the same Wi-Fi network the computer is on.

Can I attach my HP monitor to Mac air with a DVI cable?

Can I attach my HP monitor w1907 to Mac air with a DVI cable?

You need to use a DVI to Mini DisplayPort adapter; for a 30-inch display, the adapter needs to be dual-link.
(122652)

What kind of DVI cable do I need?

Hi. I want to run video from my PB12 to my plasma TV (I know I need a separate audio cable).
I have the mini DVI to DVI adapter that came with the PB. My question is really, how many pins must the HDMI - DVI cable have? I see so many available with 18 (+1), but my adapter is 24 (+1).
Do I NEED a 24 pin, or can I use the much easier to find 18 pin?
thanks!

I use the adaptor to transfer the signal to a VGA format and simply bought a VGA cable from monoprice.com. Very good deals on all kinds of cables.
I recently ordered a VGA cable for a friend and they sent me a DVI to HDMI cable by mistake. I bet that would work fine too. It would seem to me that DVI is DVI, and there aren't any optional connectors that will work without all the possible pins in place.....in other words, I don't know for sure about the pin thing...I'd just get a DVI to HDMI, at the length you need, and see if it works.

What kind of DVI Cables does the Mini Take?

I want to get a DVI cable for my iLo 15in LCD but I'me confussed with the type get. I know that The Mini and my monitor are DVI male but at the mini's output after the grid of pin inlets theres a horizontal and vertical inlet that makes a plus sign look along with one inlet in each space. The DVI to VGA Adapter on the DVI ( female ) side has same plus sign pins but in the large grid of pins, there a gap in the middle. The mini doesn't have that gap on the output.
On the LCD's DVI input, it has that entire grid of pin inlets ( holes ) with no gap but next to the grid there is only one horizontal inlet. It does'nt have that plus sign look like the mini's output. Nor does it have those four inlets on each side of the cross. It's just has a horizontal inlet.
I'm not familiar with DVI so I'm confused. Some cables on the market hace that cross and the gap in the middle of the pins, some only have the horizontal pin and the grid of pins with no gap. ( Help )!!!!!!!!!

I'm not completely following you, mostly cause my math sklls bl0w.
But I think you're making a distinction, perhaps without knowing it, between a DVI and an ADC connnector.
Digital Video Input is the first connector you refer to, I believe.
Twenty four pins in a 3 x 8 config and the section for video color you refer to as the plus sign. This is technically 5 pin.
The other connector sounds like an Apple Disply Connector (or ADC). These are 30-pin in a 3 x 10 config plus the video color 5-pin.
You can get picture perfect clear on this here
http://developer.apple.com/documentation/Hardware/DeveloperNotes/Macintosh_CPUs-G5/PowerMacG5/3Input-Output/chapter_4_section_12.html#//app leref/doc/uid/TP40002012-CH207-TPXREF159
hope this helps you bro.

Mini-DVI to HDMI adapter or Mini-DVI to DVI cable?

I know Apple has a couple different Mini-DVI adapters for their Powerbook and MacBook computers. I don't especially like adapters and was wondering if anyone knows of a Mini-DVI to DVI cable.
Also, with the gaining popularity of HDMI, do you think we will ever see a Mini-DVI to HDMI adapter or cable?

Hi,
I know it is changing the subject, but I've been long frustrated by Apple's penchant for odd connectors, especially video connectors. Remember old quadras with 13 pin D connectors, powerbooks with square connectors, 7100s with I-don't-know-what connectors? All the while, ye olde VGA 15-pin D-sub connector was on just about everything else - even gas chromatographs.
We also got that funny mini-dix (Digital-Intel-Xerox) Ethernet connector on powerbooks when PCs were outfitted with familiar RJ-45 jacks. I did see one other machine that had the mini-dix: a government spec Zenith notebook.
I'm surprised Apple didn't use a VGA connector on the Macbook, given its above average exposure in the educational environment and greater than average odds of being hooked up to a lectern in a distance learning room. Pretty much to a tee, every distance learning setup I've seen has a VGA cable at the presenter's lectern. I worked in a university IT department, and it was pretty common for our loaner laptops to come back missing just about any ancillary goodie that could be misplaced. It isn't so bad to have to routinely stuff a new $2.00 cat-5 cable in the bag, but a $20.00 video dongle - not so good!
If Apple just couldn't countenance the idea of a VGA connector, I wonder how hard it would have been to have a normal size DVI connector? At least DVI-to-VGA connectors are easier to find, and better, aren't so expensive.
Bill
Message was edited by: impulse_telecom

Satellite A205: Dynadock - How to connect to LCD TV with HDMI to DVI cable

I recently purchased this product and had a problem when connecting it to my LCD TV.
I used a HDMI to DVI cable to connect it to the TV. Only a small portion of the full display shows on the TV.
I have adjusted all setting on the laptop (Satellite A205) but it only adjusts the laptop screen, not the TV.
I also used the adaptor to VGA, plugged it into the computer input on TV, same effect. I can use VGA output on side of laptop to TV ok.
Any ideas on how to adjust dynadock output settings?

First of all it would be interesting to know what dynadock you have exactly; one with DVI port or one with VGA port?
>I have adjusted all setting on the laptop (Satellite A205) but it only adjusts the laptop screen, not the TV.
You should know that the dynadock has a own built-in graphics controller and video drivers to control the video stream.
Therefore you should change the settings directly in the dynadock settings and not on the laptop!!!
Greetigns

MS-7265 bootup without attached VGA/DVI cable

Similar Messages

Maybe you are looking for