MS-7525 (Boston)

I have a HP machine with this mother board. I think it is running bios 5.16.
I am trying to find the 5.22 update as i am looking at upgrading the CPU to a e8400.
I am running windows 7 32bit and the only update i have been able to find is for VISTA.
Couple of questions. Does the bios update actually matter or will this cpu work with out it.
If i use the vista update will that make any difference as i am running 7.
Why is there no link here for the upgraded bios anyone got  alink to reputable site to get the update if it is worrth the aggrovation.

We do not support OEM products.
You have to contact HP for assistance.
For more information, you can read here: https://forum-en.msi.com/index.php?topic=110544.0
Topic locked.

Similar Messages

  • Совместимость

    Мое почтение! Помогите пожалуйста решить слеующую проблему!-У меня  MS-7525 (Бостон) материнская плата!http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01386897&tmp_task=prodinfoCategory&lc=en&dlc=en... Конфигурация компьютера--Тип Award BIOS Phoenix - AwardBIOS v6.00PG! -MS Windows 7 Ultimate 64-bit SP1 ntel Pentium E5200 @ 2.50GHz 30 °C Технология Wolfdale 45nm 2,00 ГБ 2-канальная DDR2 @ 399 МГц MSI Boston (Socket 775) Intel(R) G33/G31 Express Chipset Family Блок питания PurePower 460W-NP (W0068, 460 Вт) -------Я купил для апгрейда Видеокарта PCI-E Asus GeForce 210 1024MB 64bit DDR3 [EN210 SILENT/DI/1GD3 /V2 (LP)] DVI D-Sub HDMI Low Profile и при установки ее в слот PCI Express 16x и при запуске системы не включается виндовс и нет возможности зайти в биос! А кулеры все включаются! Если вынуть видеокарту и подключить интегрированную то все работает. Видеокарта рабочая и слот PCI Express 16x в компьютере тоже-проверял! Первая проблема -старый биос! Или несовместимость чипсета  Intel GMA 3100 с этой видеокартой? На сайте НР не могу найти свою модель т.к корпус компьютера неродной и номер модели узнать невозможно! Пробовал все варианты которые на сайте НР предлагаютhttp://h10025.www1.hp.com/ewfrf/wc/document? ноtmp_renderType=findModel&cc=us&dlc=en&docname=c00004461&lc=en#N90.но без результатов! Наткнулся слуайно на одно обновление MS-7525 BIOS материнских плат обновление улучшает совместимость с картой Nvidia GeForce G210 графику, и решает проблему с системой висит на логотип HP во время запуска.http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-73126-1&cc=us&dlc=en&lc=en&... Но оно не устанавливается по пичине точто у меня компьютер несоответствует минимальным требованиям! Помогите с проблемой!!!!

    The following was translated from Russian using translate.google.com.  Let me know if it is incorrect.
    My compliments! Please help solve the problem sleuyuschuyu!-I MS-7525 (Boston) Motherboard Computer Configuration - Type Award BIOS Phoenix - AwardBIOS v6.00PG! -MS Windows 7 Ultimate 64-bit SP1 ntel Pentium [email protected] 30 ° C Wolfdale 45nm 2,00 Technology GB 2-Channel DDR2 @ 399 MHz MSI Boston (Socket 775) Intel (R) G33/G31 Express Chipset Family Power Supply PurePower 460W-NP (W0068, 460W) ------- I bought a video card upgrade for PCI-E Asus GeForce 210 1024MB 64bit DDR3 [EN210 SILENT/DI/1GD3 / V2 (LP)] DVI D-Sub HDMI Low Profile and set it to the PCI Express 16x slot, and when the system does not turn on windose and no way to go into the BIOS! A cooler all included! If you remove the card and plug integrated all works. Video card working and PCI Express 16x slot in the computer, too, checked! The first problem is an old bios! Or incompatibility chipset Intel GMA 3100 graphics card with this? The HP website can not find my model unnecessarily the computer step-and model number is impossible to know! I have tried all the options that are on the HP website predlagayuthttp :/ / h10025.www1.hp.com/ewfrf/wc/document? notmp_renderType = findModel & cc = us & dlc = en & docname = c00004461 & lc = en # N90.no no results! Sluayno stumbled on one update MS-7525 Motherboard BIOS update improves compatibility with the card Nvidia GeForce G210 graphics, and solves the problem with the system hangs on the HP logo during But it is not installed by pichine my computer do the same inconsistencies minimum requirements! Help with a problem!!
    For some reason, the link had a few gaps in it, which is probably why it did not work.
    Try this link.
    http://h10025.www1.hp.com/ewfrf/wc/document?notmp_renderType=findModel&cc=us&dlc=en&docname=c0000446...
    I tested this link just now and it loaded fine for me. 
    When you upgraded the video card, did you upgrade the power supply as well?  More than likely, the stock power supply is too weak to power the new graphics card.  OEM systems typically come with a power supply just enough to cover what it comes with.  Since the unit came with an integrated graphics card, the graphics card didn't have to be accounted for. 
    Once I have the product number of the unit, I should be able to provide a more specific answer.  I highly suspect you will need a more powerful power supply to go along with that graphics card. 
    По некоторым причинам, связь была несколько пробелов в нем, поэтому, наверное, он не работает.
    Попробуйте эту ссылку.
    http://h10025.www1.hp.com/ewfrf/wc/document?notmp_renderType=findModel&cc=us&dlc=en&docname=c0000446...
    Я проверил эту ссылку сейчас и он загружен хорошо для меня.
    При обновлении видеокарты, вы обновите питания, а? Более чем вероятно, поставка складе власть слишком слаба, чтобы мощность новой видеокарты. OEM системы обычно поставляются с блоком питания достаточно, чтобы покрыть то, что она поставляется с. Поскольку блок пришел с интегрированной видеокартой, видеокарта не должны быть учтены.
    Однажды я есть продукт номер аппарата, я должен быть в состоянии дать более конкретный ответ. Я очень подозреваю, вам понадобится более мощный блок питания, чтобы идти вместе с этой видеокартой.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • All port sata does't worked

    hello. i have a hp pavilion g3435d pc dekstop with mainboard series ms-7525 (boston). now.....  my computer doesn't worked ( not good ) becouse all port sata ( 4 port sata ) at motherboard can detected all my harddrive. i was try to connect with other good harddrive, " hardisk and dvd rw........" but still not connected and detected with bios and OS. can anybody help me...!!! what should i do....??? thanks

    I figured it out.  I'm trying to access the port from my work network and the firewalls are blocking the outbound traffic on that port.  I just tried an accessing the iport from my mobile phone and I was able to get a reply.  So the lesson learned is try and access the ip/port from another network because there may be a firewall blocking your access.

  • Bios msi 7525

    i have a computer with a msi 7525 (version 1). I can't activate Wake on lan. I suspect the problem is in the Bios. I'd like to reinstall the Bios firmware but I can't find a page to download it.
    I'll be grateful if someone can tell me where can I download this Bios Firmware.
    Thanks in advance.

    Topic locked, the MS-7525 is not a retail motherboard, it's an OEM motherboard that MSI custom built for HP/Compaq and called the Boston GL6 by HP.
    You need to seek support from HP. http://support.hp.com

  • Using boston acoustics digital ba735 speakers on my Mac Pro

    just bought a Mac Pro. Would like to use my digital ba735 speakers from my old Gateway. These are proprietary and needed a digital sound card. Any way I can use some type of converter cord to accept the line out audio signal.
    mac pro   Mac OS X (10.4.10)  

    Hi and welcome to Discussions,
    I don't know about the Boston speakers, but have you tried connecting them to the Digital-Out at the back of your MacPro ?
    Maybe this is sufficient to get sound.
    Regards
    Stefan

  • My iPhone cannot find my AirPrint printer HP Photosmart 7525.  What do I do?

    My iPhone and iPad cannot find any AirPrint Printers.  MY HYP Photosmart 7525 is AirPrint compatible, what can I do?

    Hey kennethfrommascoutah,
    Thanks for using Apple Support Communities.
    Since you are having trouble using AirPrint follow this section of the article.
    About AirPrint
    http://support.apple.com/kb/ht4356
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Have a nice day,
    Mario

  • My I pad does not find my HP 7525 as an airprint printer

    I am on a wireless network at my home but when I try to print with my HP Photosmart 7525 printer my Ipad says no airprinters found.  I can print from my android phone and my Ipad is on the correct network.  ???
    This question was solved.
    View Solution.

    Hi,
    Sorry to hear you are having problems printing.
    Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
    Other thing to check would be that there have been no recent changes to the wifi password.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Photosmart 7525 won't scan to mac...HELP!

    I recently bought an iMac (OSX 10.9.4) and an HP Photosmart 7525 e-all-in-one printer.  The print and fax work fine, but I cannot scan to my computer. 
    I've installed the HP software from the HP download site, but I still get a message on the printer that says "No computer is connected"  How do I fix this??
    This question was solved.
    View Solution.

    Hi @mfspectrum, 
    I see by your post that you are unable to scan. I can help you with this.
    Enable the scan to computer settings. A 'No Computer Detected' or 'Connection Error' Message Displays during Scanning. Go to Solution two: Check the Scan to Computer setting, Step one: Check the Scan to Computer setting.
    Check the driver name that is installed for the printer. The Airprint driver might be installed instead of the Printer's driver. (usually defaults to Airprint)
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
    If the printer name shows Airprint then that is the Apple drivers, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    Try and scan again.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp 7525 Photosmart printer won't scan to my PC but will scan to other PCs on the LAN

    Hp 7525 Photosmart printer won't scan to my PC but will scan to other PCs on the LAN.  I tried to install the printer software but it says it is already installed.  Do I have a security setting wrong?
    Other PC names show up on the printer's touch screen but not mine.  We are all on the same wireless subnet with the printer at a fixed IP address.
    I can print from my PC and scan from my PC but I can't scan from the printer touchscreen to my PC.
    tcliff

    Hi,
    You may have to start from your computer first:
        Double click printer icon on desktop,
        Select Manage Scan to Computer
        Click Enable -
        Restart your printer to see, is your machine in the list ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Fax from computer to photosmart 7525 gets cancelled after spooling

    I can fax directly from printer, but when I use the HP software or print function on the computer to set up fax and send, the progress goes from spooling to cancelled without any error notices. I have a Dell XPS 8500 running 8.1 and Photosmart 7525 connected by USB and wirelessly. They communicate just fine with the scan and print functions. Both are current on updates using the check for updates utility. I have a dedicated Voip phone line from Comcast and ther most current modem that I have slowed through the fax settings. I've spent hours reading forums on HP and Microsoft searching for exactly this issue. Please help

    Hi @xskilledtrades
    The truth is, I don't know what is causing the fax from computer function to fail. I understand from your description that the fax is cancelling after spooling, but that you can print and scan just fine as well as fax directly from the printer. I suspect the issue has something to do with the driver, thus I suggest we remove the driver and reload it.
    Please use the following steps to delete the printer/fax from device and printers, and the driver from the server properties.
    1. In the ‘Devices and Printers’ folder
    2. Choose ‘Print server properties’.
    Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
    Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
    Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
    3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
    4. Choose the printer you want to uninstall and click ‘Remove’
    5. Choose 'Remove driver only'
    6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
    If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
    If the you continue to get an 'in use' message follow the steps in the document here; The Specified Printer Driver is Currently in Use
    After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
    The Setup and software screen will open and you can click on Connect a new printer.
    Thanks, I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Smart Software Engineer with LabVIEW experience (and acoustics a plus) needed in Boston, MA

    We've are looking for a staff software engineer to join our company in Boston, MA (near downtown).  We have a 3000+ vi application that has been in continuous development by multiple software engineers (currently 4 engineers + 1 intern) for 15 years.  Every year we release a new version of the software with significant new features.  An engineer with our company needs to be more than just a LabVIEW hacker.  We need a software engineering that can go into our large application, modify it, sometimes in very fundamental ways, without breaking existing functionality, and have an eye for how their changes impact the maintainability, scalability, reliability, and readability of our code.
    Candidates will likely be LabVIEW Architects or have equivalent experience if they don't have formal certification.  We lean towards candidates who have Masters Degrees in such fields as Electrical Engineering, Mechanical Engineering, and Computer Science. Interviews will be conducted over phone, web, and in person by a LabVIEW Architect and will need to be able to discuss topics such as the following:
    - coupling and cohesion in software design, how this relates to design paterns such as action engines
    - software lifecycle models- state machines, parallel loop architectures, race conditions, data structures, type definitions, Xcontrols,
    - Object Oriented design
    - importance of documentation, importance and use of source code control
    - pseudo code and its usefulness as a design tool, some exercises will require users to read and write pseudo code to solve classic computer science problems
    - tradeoffs of various file formats in terms of flexibility for future software changes
    - FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
    Formal job ad is below:
    To be considered for this position, please send resumé and cover letter explaining why you are the ideal candidate for this job (in Word or PDF format only) to [email protected]. Please use the subject title Software Programmer.
    Programmer for Audio Test and Measurement software - Boston
    Listen, Inc. is the market leader in PC based electro-acoustic test and measurement systems for testing loudspeakers, microphones, telephones, audio electronics, hearing aids and other transducers. We have been in business for over 15 years and our continued growth has created an opportunity for a software engineer to join our programming team. This is an exciting opportunity to work on an industry leading electro-acoustic test and measurement system used by numerous Fortune 500 companies in the field of loudspeaker, microphone, headphone, telecommunications and audio electronic manufacturing.
     This position reports to the Software Manager. Duties include, but are not limited to:
    Programming in LabVIEW
    Designing and coding new Sound Measurement and Analysis software
    Improving, reviewing and de-bugging existing code
    Preparing internal and user technical documentation
    Testing code
    Interfacing with management, sales teams and customers to define tasks
     Required skills / education
    Bachelor’s degree (Masters preferred) in electrical engineering, mechanical engineering, computer science, physics, or similar subject
    Strong background (4+ years) in programming with 1+ years in LabVIEW.
    A methodical approach to coding, testing and documentation
    The ability to work well in a small team. A willingness to challenge and discuss your own and other people’s ideas.
    Experience in acoustic engineering is a plus.  Relevant topics include FFT, Frequency Response, Amplitude/phase, RMS level, dB, noise, averaging, distortion, loudness, A-weighting
    About Listen
    Listen has been in business for over 15 years and our suite of PC & sound card audio test & measurement products is the accepted standard in many blue-chip companies worldwide. We offer the spirit and flexibility of a small company, combined with stability and an excellent externally managed benefits package which includes competitive salary, healthcare, paid vacation, retirement plan and more.
    Applicants must have authorization to work in the US. We are unable to assist with visa / work permit applications.

    we're interviewing candidates, but, this position is still available

  • How do I print an 8"x10" photo on my HP 7525 printer.

    The drop-down options for print size on my HP 7525 don't show 8"x10". I have the usual 4"x6", 3.5"x5" and 5"x7", then 10x15cm, 2L, Japanese Postcard, A6, L, 10x15 tab, 4x6" tab, 13x18ccm and Index card. But no choice for 8"x10". What must I do to print an 8"x10" photo?
    Thanks for any help you can give me.
    This question was solved.
    View Solution.

    Hello CKAY,
    My old printer does not show 8x10 either.
    In the printing preferences under the Paper/Quality tab, do you see a "Custom" option or button? There should be one in there somewhere in your preferences.
    Click on that and create a custom size of 8 in for the width and 10 in for the length. Be sure to "Name" it 8x10 Photo and click ok.
    Now give it whatever attributes you want under the other tabs and click Apply and OK (or just OK).
    Close out the printer and open it again and the new size you created should show in the list.

  • Won't print more than 1 copy at a time 7525 wireless or connoted with my MAC

    I am able to print fine from my MAC wirelessly.  I just cannot print more than one copy at a time.  HELP!!!

    Hi lkc,
    Welcome to the HP Support Forums! I see you are able to print wirelessly to your HP Photosmart 7525 to your MAC, however it only allows you to print one page at a time.
    I would like you to complete the steps listed below:
    Uninstall
    1. From the computer desktop, double-click the Macintosh HD, and then click Applications.
    2. Click the Hewlett-Packard folder.
    3. Double-click the HP Uninstaller, and then click Continue.
    4. Select the printer to uninstall, and then click Uninstall.
    5. When prompted, type the Administrator name and Password, and then click OK.
    Reset Printing System
    1. Click the Apple icon, and then click System Preferences .
    2. In the Hardware section, click Print & Fax. The Print & Fax dialog box opens.
    3. Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
    4. Click OK to confirm the reset.
    5. Type the correct Name and Password.
    6. Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected.
    Repair Disk Permissions
    1. On the Dock, click Applications, and then click Utilities.
    2. Double-click Disk Utility.
    3. Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    4. Click the Repair Disk Permissions button at the bottom of the window.
    Now I would like you to restart the MAC, once it is restarted please go ahead and run the software installation. Click below and select your current Mac OS X from the drop down list, download the drivers and proceed with the on screen instructions:
    HP Photosmart 7525 e-All-in-One Printer Drivers
    Let me know the outcome, I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My new hp photosmart 7525 won't print

    my new hp photosmart 7525 won't print and says it is "offline". In addition, the tray app error keeps coming on. I uninstalled my old printer. I have Vista.

    Hi @hannabanna 
    I would like to help you print to your 7525. Let's first address the tray app error, then we can focus on the printer offline message.
    The tray app error seems to be stemming from the older software you have uninstalled, it appears something did not fully uninstall. Please complete the following steps.
    Please note; I simply choose the printer I did for steps 3 because of the version of software, we will not be installing this printer, I only want to use it to perform a comprehensive uninstall.
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Download the software and choose to save as, save to desktop > HP Photosmart C7280 All-in-One Printer
    After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
    Look for, and open the folder starting with 7z (Example: 7zS2356)
    Open folder Util
    Open folder CCC
    If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /unregister, and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type msiexec /regserver, and then click OK
     *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
    Restart the computer
    Download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    Step 14 will help you to re-install the 7525. Once the 7525 is re-installed, please try printing. If you get the printer offline message, use the following document; 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Please let me know if this resolves the issues, and or is you require further assistance. If you still get the tray app error, please let me know which printer you had before that you recently uninstalled. Thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP Photosmart 7525 e-All-in-O​ne Printer won't print black

    I've had my product for a little over a year (out of warrenty) I have replaced all cartridges and done Print Quality Diagnostic. However my black won't print. The photo black works, but not the main, large one.
    I've super cleaned the pinheads. At the beginning of the print it was dark black, but then faded to gray streeks.
    Can anyone help with this?
    Thanks!
    This question was solved.
    View Solution.

    The document here may help resolve black not printing on your Photosmart 7525.  Go through each of the steps, but be especially sure to check the vents as shown in solution six.
    If the steps in the first seven solutions do not resolve the issue the post here may help.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for