Ms-8900 and live update not working

In the beginning the live update auto-search would work, but now it it stops running when it gets to "searching for msi utilities" and does nothing.  I have updated to the 3.34 version, no pop-up blockers, etc...
any ideas why it's doing this now?

You might want to try and uninstal it then reinstal it, and if that does not do it, then more than likely their service is temporarly down, Has happened to me a time or two and more often than not it is the site to blame.

Similar Messages

  • MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

    This topic has been moved to Operating Systems.
    MSI Live Update not working Windows XP Professional 64bit Edition!!!

    Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
    A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
    Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
    http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
    Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

  • Reason for msi tabs & live update not working

    Ok i had the same problems with my msi video card the msi tabs not working and live update giving me an error. I used to run a asus p4b533 board with a sis chipset> what i found out is that the live update and the tabs work under any m/b that have the intel chipset. I now have a asus board with  a intel chupset it's working fine.  I've tried this on other boards and same results.  It seems that everyone who's had the problem was not using an intel chipset board. This is my theory...
    -rak

    Just reinstall LU, and you should be fine.

  • Same issue Network Discovery not working and Windows Update not working

    I've read the threads. 
    This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
    Everything was working before. I tried all of the recommended  services turning on restarting.
    Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
    I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
    I don't have the NetBIOS over tcp/ip in my services?
    I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
    FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
    Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
    Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients. 
    Thank You

    Hi,
    If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
    What is System Restore?
    http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
    When you turn on network discovery, do you get any error prompt?
    Please check if you have any error message about network discovery in event viewer.
    Open Event Viewer
    http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
    What information appears in event logs (Event Viewer)?
    http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
    Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
    Also, please temporarily turn off your firewall and all the security programs for a test.
    As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness,  Remote Procedure Call (RPC), Function Discovery
    Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
    You should check again if you have started all these services.
    Regarding the update issue, I suggest you try the following suggestions.
    1. Temporarily disable firewall and antivirus program to test the issue.
    2. Open the Windows Update troubleshooter
    http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
    3. Reset Windows Update components
    http://support.microsoft.com/kb/971058
    You may follow the steps from the link below to fix the issue.
    Windows Update Not Working.
    http://support.microsoft.com/kb/555989
    You may also see the common Windows Updates troubleshooting guide.
    Fix Microsoft Windows Update Issues
    http://support.microsoft.com/kb/906602
    Hope it helps.
    Regards,
    Blair Deng
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Msi Live update not working.

    Hi. Always when I start up my MSI live update a window pops up and says "Error. Service could not be started/initialized" (I don't know exactly because my Windows are in Czech). Everything worked fine yesterday. The only modification I have done is inserted a sound card (Sound blaster live). I have disabled the old one in BIOS. ;(
    Please help.

    Just reinstall LU, and you should be fine.

  • Broke out of the box and itune update not working

    Just got apple tv delivered today but it wasn't working out of the box... flashing white light..
    So i connected it to itunes via micro usb and itunes won't restore it looks like the .dmg is missing..
    This is really bad, surely apple have noticed the software update is missing???
    Did this update work for anyone?

    It's impossible to know how much work there is putting it back, it sounds simple but it might not be, it's been down a few days now, I suppose it depends on how much inconvenience it is to return it for another.

  • Live Updating Not Working in 11.0.1

    I noticed something odd after the latest iTunes update (v11.0.1).  I have a smart playlist that I play in the background that looks for songs I haven't played in X number of days.  Obviously, after a song plays then the Last Played field should update the song would be removed from the list.  I've been noticing that the song count for the playlist hasn't been decrementing, and even after playing a song I can still find it in the list and the Last Played field has not changed.  What's interesting is that if I manually click to the very end of a song, then the field updates and is removed from the playlist.  So...it appears that for whatever reason either the playlist is not liveupdating with the Last Played info, or some other sort of bug/issue has been introduced?

    ekrengel wrote:
    I am also unable to clone a live vm or virtual disk, and I am using fiber channel storage.What version of Oracle VM are you running? Does your VM have any physical disks attached? I believe a Live Clone is only available if the VM only has virtual disk images or if you're using a Storage Connect Plugin to a SAN that can do hot clones of physical LUNs.

  • Firmware and Software updates not working

    Enjoyed you tests on the YouTube site regarding Vado HD? I have now bought one and it's great as you said, I have a problem though I downloaded the updated firmware and Software from this web address:http://support.creative.com/Products...odName=Vado+HDThe problem I am having is when I run the exe's a window opens up with message: supported Vado?HD is not detected, I have tried running them from both my hard dri've on the computer and also from the hard dri've on the Vado HD? question is have you tried to update Firmware and Soft ware? does it work for you? It might help that I bought my Vado in the USA but I am using it in the United Kingdom and have it set to PAL and Europe, could this be the problem? In any case do you think the update is an important one?. Would like to resolve if possible though. Thanks for you anticipated help

    I have done the reboot - still the same.
    This is exactly what I see when I go to install - maybe this will be of help http://img.photobucket.com/albums/v63/serialthrillaz/Picture2.png
    and then i tried running disk utility and i got this -
    http://img.photobucket.com/albums/v63/serialthrillaz/Picture3.png
    ive also went in single user mode and done the fsck - fy & /sbin/mount -uw thing
    i did /usr/sbin/diskutil repairPermissions but it just stood still and didnt do anything (is this normal??) go back to work (apple store employee, yay) tomorrow but i dont really want to drag this down to the bar. so thank you for your help

  • IPod Sync and iTunes update not working

    I plugged my iPod (Touch 3g) into my laptop to sync with my iTunes library and was confronted with the following error message:
    "iTunes was unable to load data class information from Sync Services. Reconnect or try later"
    I thought I'd update my software to eliminate that as a source of the problem, but Apple Software Update gives me the following error message:
    "The Apple Software Update server could not be found. Check your Internet settings and try again."
    I've tried restarting my laptop, but both messages remain. I'm guessing the two messages are related to the same issue. Anyone else getting the same and/or have a possible solution?
    Thanks!

    Have a look at this thread for similar issues.
    http://discussions.apple.com/thread/6500271

  • Ipod nano and itunes update not working

    I bought a new ipod nano, says I need to update version of itunes, each time I do, it restarts my computer but nothing has updated??

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

  • Windows updates not working because it extract patches on Mac partition first., Windows updates not working because it extract patches on Mac partition first.

    I have installed BootCamp 5.1 and Windows updates not working because it extract files on Mac partition before installation. Is there any workaround for same ?

    To replicate this issue - Try to download .net framework 4.5 from microsoft website and than run that setup on windows partition.
    Before installation. it will first extract all the binaries to a other drivers, since in my case other primary drive is E which is a Mac partition so it always give me an error while extractiing and therefore setup is not able to execute propely.
    Let me try to get the screen shot of error and send it here.

  • I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there.  I've uninstalled iTunes and reinstalled twice and it's not working.  Please help.

    I have not had wifi since November when I upgraded to the newest IOS version.  I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again.  I kept doing what they told me and it worked for a couple more days and then I could never turn it on again.  My blue tooth doesn't work either.  I had to actually increase my data usage with AT&T becuase of this.  When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue.  My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!!  I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue.  Who knows how many people out there have had this issue and have not said anything about it.  Now there is a newer update that I can't do because it requires wifi in order to download.
    June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

  • HT1212 I just updated my Ipad 2 to IOS7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. I tried using the OIS7 passcode I use on my Iphone  and it did not work and now my Ipad is disabled

    I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I  tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode

    I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
    I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring.

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id.  Any answers or reasons why on the iPhone 5 is not working???

    My iMessage and facetime is not working after updating to ios 7...
    Any answers on how to fix it?  I've tried to restart, restore connected to itunes, but nothing.

    ACTIVATING FACETIME AND IMESSAGES
    Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS.  Check with your carrier to see if your plan supports sending of international SMS messages.  If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)).  Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation.  If that does not fix things read the following articles:
    http://support.apple.com/kb/TS4268
    http://support.apple.com/kb/ts3367

Maybe you are looking for