MS-9109 HTTP Receive Error.....polite.ini configuration settings?

Several of our mobile clients are repeatedly receiving the MS-9109 synchronization error.
I understand that this indicates a break/interruption in the network connection. Some of the sync queries are taking a long time to execute 5-6 minutes.
After reviewing the mobile server log files trace_sysx.log, I see the "Connection aborted by peer: socket write error". So I believe the web-to-go client software is timing-out.
We are running Oracle 9i v 5.0.2.8.0...(and yes we do need to upgrade) Does 9i Lite recognize the below polite.ini config. settings?
[SYNC]
TIMEOUT_MAX=900
RESUME_CLIENT_TIMEOUT=900

Sizer,
See if you can't get to patch 5.0.2.10. I am not sure if metalink still has that patch set available. Also, have you thought of tuning your queries so they don't take so long? 5 - 6 minutes for a query to run is far too long.
You can put those parameters in and they may work. I can't remember if they were part of the parameters of the 9i versions.

Similar Messages

SOAP Receiver Success / HTTP Receiver Error

Hello,
we have to connect to a http server (HTTP with user authentication). I have tried both a HTTP receiver channel as well as a SOAP receiver channel (option "Do Not Use SOAP Envelope").
Connection using the SOAP receiver works without problem. If we switch to plain HTTP receiver (same connection details) we get the following error:
"HTTP client code 400 reason ICM_HTTP_CONNECTION_FAILED".
What could the reason for this? Probably related to the ABAP Stack?
Edited by: Florian Guppenberger on Jan 26, 2010 3:12 PM

Hi,
>>>What could the reason for this? Probably related to the ABAP Stack?
check the log on ABAP for RFC dest from SM59
there you might see some more info
BTW
does PI/XI have access to this http sever ? (no firewalls etc?)
Regards,
Michal Krawczyk

HTTP Receiver Error

Hi All,
I am working on a SOAP to HTTP scenario.
Here, my message are getting posted correctly by SOAP sender, but on receiver HTTP side it is getting failed.
In SXMB_MONI, I am getting the following error:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is this a server related error?
If yes, then what could be the solution for it?
Regards,
Supriya.

Hi,
Two days back i have been faced same error like "HTTP 500 Internal Server Error", But i was faced in RWB-->Message Monitorining.
Today i found solution for this , Because of we have experienced various downtime during the period Oct-14 until Oct-20. Now all systems should be running full speed again.
Finally i resend successfully.
So, Might be your issue also looking like.So contact to your server adminstrative guys and find the solutions
Thank you very much.
Regard's
Sateesh

HTTP 404 error page after configuring TEAMING 2.0

I have been through the entire manual for Novell Teaming and after installing it on both a SLES 10 and a Windows 2K3 server I am unable to login with a web browser. HTTP Status 404 -
type Status report
message
description: The requested resource () is not available.
Apache Tomcat/6.0.18
I have tried 3 versions of JAVA JDK starting with the version suggested in the manual.
1. jdk-1_5_0_17-linux-i586.rpm
2. jdk-1_5_0_14-nb-6_0-windows.exe
3. jdk-1_5_0_20-linux-i586.rpm
Again- all produce the same result.
Wondering if this is, indeed, a java problem, or a port problem.
Any thoughts?

What Database type/version did you install?
Is the Database server running?
Under the /opt/novell/teaming/apache-somethingdir/logs directory, there is a catalina.out file.
This is the log file and it will tell you if Teaming has actually loaded or not.
Also, is there a section near the bottom of the installer.log file that says the database was installed?
Last, but not least, if you did a default install, when you type in the URL in your browser, are you added the :8080 at the end?
Ira
>>> tmcfadden<[email protected]> 8/20/2009 10:16 AM >>>
tmcfadden;1844321 Wrote:
> I have been through the entire manual for Novell Teaming and after
> installing it on both a SLES 10 and a Windows 2K3 server I am unable to
> login with a web browser. HTTP Status 404 -
>
> TYPE STATUS REPORT
> MESSAGE
> DESCRIPTION: THE REQUESTED RESOURCE () IS NOT AVAILABLE.
> -----------------
> APACHE TOMCAT/6.0.18
>
> I have tried 3 versions of JAVA JDK starting with the version suggested
> in the manual.
> 1. jdk-1_5_0_17-linux-i586.rpm
> 2. jdk-1_5_0_14-nb-6_0-windows.exe
> 3. jdk-1_5_0_20-linux-i586.rpm
>
> Again- all produce the same result.
>
> Wondering if this is, indeed, a java problem, or a port problem.
> Any thoughts?
tmcfadden
tmcfadden's Profile: http://forums.novell.com/member.php?userid=6400
View this thread: http://forums.novell.com/showthread.php?t=383745

Trying to set up a group email "RAM" that will contain multiple email addresses. Receive error messages "check SMTP settings" or "Invalid email address" when I try to send a message to the group.

I am trying to set up the group email "RAM" that will contain multiple email addresses. I have inputted the name "RAM" as a corporation. In the section labeled "Email" I have inputed multiple email addreses so that when I want to send an email to the group "RAM" I just have to input the name "RAM" in the section labeled "To" , input the Subject in the Subject box & the email will be sent to the multiple addresses, yet when I do I receive either one of two error messages being "Invalid Email Address" or "Check SMTP settings" each of which allows me the option of with cancelling the email or send it anyway.

Bump. I'd like to know, too. I even have some synched Groups from my Apple Address Book I email to using Apple Mail on the Powerbook, but I can't see how to do a group mailing on the Touch either.
In normal Mail, I just start typing the name of the group, and it autocompletes, I hit return, and it fills in all addresses in the Group.

ChangeConfigurationByName fails with "The specified configuration settings for Settings are invalid."

Hello,
I am tryint to update deployment and always have following error
"The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers."
Have found similar
thread and
stack overflow - without any success. I am not chaning anyting. Just reading deployment configuration and tryint to update with the same settings. I use .net azure sdk wrappers to generate requests. Code looks like:
var deployment = client.Deployments.GetByName(location.DataCenter, location.Cluster);var result = client.Deployments.ChangeConfigurationByName(location.DataCenter, location.Cluster, new DeploymentChangeConfigurationParameters{ Configuration = deployment.Configuration});
Catched request response from fiddler:
POST https://management.core.windows.net/[subscription-id]/services/hostedservices/[service-name]/deployments/[deployment-name]/?comp=config HTTP/1.1
x-ms-version: 2013-11-01
User-Agent: Microsoft.WindowsAzure.Management.Compute.ComputeManagementClient/0.9.0.0
client-tracking-id: 2
Content-Type: application/xml
Host: management.core.windows.net
Content-Length: 544
Expect: 100-continue
Connection: Keep-Alive
<ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
<Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
<ExtendedProperties />
</ChangeConfiguration>
Response
HTTP/1.1 400 Bad Request
Cache-Control: no-cache
Content-Length: 351
Content-Type: application/xml; charset=utf-8
Server: 1.0.6198.51 (rd_rdfe_stable.140226-1543) Microsoft-HTTPAPI/2.0
x-ms-servedbyregion: ussouth
x-ms-request-id: dcb1c5aedb5872d4aaf90acfede2de0b
Date: Tue, 04 Mar 2014 13:38:10 GMT
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Code>BadRequest</Code><Message>The specified configuration settings for Settings are invalid. Verify
that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message></Error>
the same data returned by operation status. Decoded base-64 encoded string looks like
<ServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration">
<Role name="yauhen-ccis2">
<Instances count="1" />
</Role>
</ServiceConfiguration>
Have tried without new line symbols, without xmlns, updating by production. without any success

Hi,
The configuration file is a file with extension .cscfg. If you have Visual Studio, the file is automatically generated when you create the project, and automatically updated when you modify the project's properties.
>> Not sure were could I get content of this file from api?
It's needed to encode this file's content use base64, and put the result in the body of your request. (Please refer to
http://msdn.microsoft.com/en-us/library/windowsazure/ee758710.aspx for more information.)
>> <ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
<Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
However, may I know how you find the body for your request? (It seems you do a base64 decoding, you find it is a valid configuration file, but it doesn't have any configuration settings.) Actually, the settings defined in csdef needed to
be contained in the configuration file.
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

OIF 11g :Configuration settings are unavailable because /Farm_IDMDomain/IDM

Hi All,
Although the OIF node and admin server are shown as up, when attempting to access the Configuration menu in Enterprise Monitor, the following error is displayed:
Configuration settings are unavailable because /Farm_IDMDomain/IDMDomain/wls_oif1/OIF(11.1.1.2.0) is down.
Below are the logs :
####<06/09/2012 10:45:40 AM EST> <Warning> <org.apache.myfaces.trinidadinternal.context.RequestContextImpl> <TSTSYDEXOIF> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <a315d5f2f1a0c2b9:-5d13a74a:1398e42fd93:-8000-0000000000001167> <1346892340967> <BEA-000000> <Could not find partial trigger authMechIdpToolbar_delete from RichTable[org.apache.myfaces.trinidad.component.UIXTable$RowKeyFacesBeanWrapper@452bf5e, id=authMechIdpMappingTable] with the supported partialTriggers syntax. The partial trigger was found with the deprecated syntax. Please use the supported syntax.>
####<06/09/2012 10:45:59 AM EST> <Warning> <Socket> <TSTSYDEXOIF> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a315d5f2f1a0c2b9:-5d13a74a:1398e42fd93:-8000-000000000000116b> <1346892359764> <BEA-000449> <Closing socket as no data read from it on 10.128.70.131:59,415 during the configured idle timeout of 5 secs>
####<06/09/2012 10:46:54 AM EST> <Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <TSTSYDEXOIF> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <a315d5f2f1a0c2b9:-5d13a74a:1398e42fd93:-8000-0000000000001177> <1346892414436> <BEA-000000> <Server Exception during PPR, #1
javax.el.ELException: oracle.sysman.emSDK.tgt.targetaccess.TargetException: Target not found
at javax.el.BeanELResolver.getValue(BeanELResolver.java:266)
at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
at com.sun.el.parser.AstValue.getValue(AstValue.java:118)
at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:192)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.sysman.emSDK.tgt.targetaccess.TargetException: Target not found
at oracle.sysman.emSDK.tgt.targetaccess.TargetManager.getTargetInstance(TargetManager.java:210)
at oracle.sysman.emSDK.tgt.targetaccess.TargetManager.getTargetInstance(TargetManager.java:180)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: oracle.sysman.emSDK.repoless.TargetNotFoundException: Target /Farm_IDMDomain/IDMDomain/wls_oif1/OIF(11.1.1.2.0)/oracle_federation not found.
at oracle.sysman.emdrep.repoless.RepolessTargetManager.getTargetInfo(RepolessTargetManager.java:1036)
at oracle.sysman.emSDK.repoless.TargetManager.getTargetInfo(TargetManager.java:116)
at oracle.sysman.emSDK.tgt.targetaccess.TargetManager.getTargetInstance(TargetManager.java:205)
at oracle.sysman.emSDK.tgt.targetaccess.TargetManager.getTargetInstance(TargetManager.java:180)
Below things already tried:
1) Updated Weblogic password in Agent monitored targets and Monitoring Credentials
2) Log in to enterprise Manager. Select OIF-> Administration -> Data Store -> Edit User Data Store and Modify the url to ldap://<hostname:nonssl port> and credentials and click on Test LDAP Connection. LDAP connection is successful. Follow the same steps for Federation Data Store
Restart OID. Do not restart from the enterprise manager console.
cd /opt/Oracle/Middleware/oaminst_1/bin
./opmnctl stopall (Stop all components)
./opmnctl status l (Ensure none of the components are active)
./opmnctl startall (Start all components)
./opmnctl status l (Ensure all the components are active)
Log in to enterprise Manager. Select OID-> Administration -> Server Properties -> Change SSL Settings -> Select SSL Authentication as No Authentication. Restart OID as described above.
Log in to enterprise Manager. Select OIF-> Administration -> Data Store -> Edit User Data Store and Modify the url to ldaps://<hostname:ssl port> and credentials and click on Test LDAP Connection. LDAP connection is successful. Follow the same steps for Federation Data Store
Restart OIF from Enterprise Manager. Select OIF -> Control
Any other things we can try here to resolve the above issue?
** Customer can also deinstall the OIF, but he wants to know, if after deinstallation will this permit a restore of all configuration settings from the previous installation?
** Also is it possible to install new EM and register the existing OIF instance to new EM?
Any inputs are highly appreciated.
Regards,
AMol

Hi Alex
We didn' really identity the problem but issue is resolved by resetting the LDAP password. Look into the LDAP log and see if you can find anything.

Send error. -9107 and receive error. -9109

hello *,
i am trying to get the sample apps. work.
i have installed oDbSrv.9i, m-Srv + mdk and mobile Client(win32 native) on the same machine.
i installed the samples by using the script.
each time i am trying to sync with msync.exe i am recieving one of the following errors:
send error. -9107 or receive error. -9109
i am using the following sync-infos:
user jane
pwd jane
srv. <http://myMachine>
i installed another client (webtogo) on another machine.
everthing works fine until i want to sync.
the message reference says i have to look for bad communication to the mobilesrv..
i can ping, i can run setup, i can login.
even when i am starting to sync from the webtogoclient the clock which tells me the connecting to server state says done!
but in the next step (sync app-data) the noted errors occures.
can anybody give me a solution for this issue?
thx

We have seen this problem before and it is most likely because you installed MDK, Mobile Client and Mobile Server on the same machine. Install Mobile Server and MDK on one machine A and Mobile Client on another machine B.

Seeburger AS2 HTTPS receiver channel error

Hi,
I am getting the following error in the receiver Seeburger AS2 channel with HTPS connection and going through a proxy to the Partner.All the certificates have been installed,proxy server information gives,mentioned the key store values and encryption certificate values have been mentioned in the receiver agreement that is using the channel.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: HTTP-Client component init failed # java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve alias collection., SEEBURGER AS2: HTTP-Client component init failed # java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve alias collection.
Can you please give me an idea whether I am missing something or any configuration settings I need to make.
Thank you,
Sri

hi Neetesh,
Thank you for the link.The first thing I have looked at is the link you gave me.But when I give with * it is complaining that it is not able to retrieve the certificates.
TRUSTED/AS2CERTS/*,but I have backward slashes..may be OS is different ,I think the original poste might have Windows servers.
any other ideas please.
thank you.

HTTP Receiver interface returns with error code 110

Hi All,
We are posting the document from XI to a external server as HTTPS request.
We are able to sucessfully post the request to external server using HTTP destination as address type but not able to post sucessfully with URL as address type.
Here goes the details -
We are able to post the HTTPS request successfully on the external server using the HTTP destination as address type in HTTP receiver adapter setup.
When we setup address type as HTTP destination , we need to provide the following details -
IN SM59 , Connection type G
Target Host : host name ( with out "https://" as prefix)
Service No : 443
Path prefix : query string
SSL : Active
Certificate : Select the certifacte from the client certificate list.
We can post the request to external server using URL as address type in HTTP receiver adapter setup.
When we setup address type as URL , we need to provide the following details -
Address type : URL Address
Target Host : host name ( with out "https://" as prefix)
Service Number : 443 ( HTTPS port setup on XI)
Path : query string.
When we post the same request as we did with HTTP destination as Address type , we are getting a HTTP response code as failure HTTP response code 110
Please find the details about the return code -
If a cache returns a stale response, either because of a max-stale directive on a request, or because the cache is configured to override the expiration time of a response, the cache MUST attach a Warning header to the stale response, using Warning 110 (Response is stale).
110 Response is stale
MUST be included whenever the returned response is stale.
Please find the error message from SXMB_MONI
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 110 reason</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please let me know if some one has faced this issue.
Regards,
Reddy
Edited by: Nanda kishore Reddy Narapu Reddy on Mar 11, 2008 12:35 PM

Hi All,
Is some one can confirm that - We can use HTTPS with Address type as URL address in HTTP receiver adapter setup.
I can confirm that using HTTP destination as Address type in HTTP receiver adapter setup we can attain HTTPS communication with external server.
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can guide me what are the steps need to be done.
Address type is a parameter in HTTP adapter setup .
Regards,
Reddy

How to trace HTTP receiver adapter error

Hi All,
My scenario is to send PO details to vendor site (HTTPS URL). MY SSL configuration is complete and I have used the SSL certificates in RFC destination of type 'G'. When I test RFC destination connection, it gives me the correct response as '200'.
This RFC destination is used in HTTP receiver adapter of XI to connect to site and post PO xml document. It is passing successfully through Integration Server, as I get success flag in 'SXMB_MONI'. But, it is not reaching our vendor's site.
Can someone help me, with what's going wrong, or how can I trace the error.
Thanks & Regards,
Amit

Hi Sadhna,
It's a B2B scenario, where my sender is configured correctly and the receiver as well.
In sxmb_moni, I am getting successfull status. But, it is not reaching receiver.
Thanks & Regards,
Amit

HTTP Receiver adapter error ?

HI Guys,
I have configured the IDOC-HTTP. I have defined a bsuiness service on the receiver side as the receiver is not in our landscape and he is our business partner.
I have created a RFC connection of type G and it is working properly but the HTTP reciver adapter gives the error as below
I'm getting an error when I go to "sxmb_moni" which says
Error Category = PLAINHTTP_ADAPTER
Error ID = ATTRIBUTE_SERVER
Kindly help..
Thanks,
Raj
Message was edited by:
raj reddy

Hi Raj,
Error Category = PLAINHTTP_ADAPTER
Error ID = ATTRIBUTE_SERVER
as far as i know this problem is due to high traffic.When the data comes in bulk some of the message are failing or when they are not able to connect to reciever server.So it gives error.
u can look @ these threads of similer taste
PLAINHTTP_ADAPTER.ATTRIBUTE_SERVER error
PLAIN HTTP ADAPTER -ATTRIBUTE_SERVER ERROR
Plain HTTP adapter error
PLAINHTTP_ADAPTER - ATTRIBUTE_SERVER
and also look @
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
Regards
biplab

Code 110 Reason Error in HTTP Receiver adapter

Hello
I am having proxy to HTTP Receiver scenario in which i am calling the target application URL through HTTP Receiver Adapter. This interface is async interface and hence i am not expecting any response from the target system.
When i execute my interface the target system receives data from XI but in SXMB_MONI it sets the status of the message as "Automatic Restart" with the error description as "HTTP client. Code 110 reason" in HTML Code area <SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
This is causing multiple messages stuck in the queue and presently i am manually clearing all the messages.
i checked the quality of service of the incoming message which is correctly setted as Exactly Once.
Is there any configuration missing?
Thanks in advance.
Regards
Rajeev

Hi Rajeev,
1.)Check in SMICM if your HTTP service is running or not.
2.)If its running fine then you can check whether your SSL certificate is configured properly or not.
Also follow the below mentioned links :
HTTP 110
HTTP Receiver Adapter -> HTTP client code 110 reason error when sending
*Pls reward with points if helpful*
Regards,
Shibani

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

HTTP Receiver adpater configuration for Web Application server

Hello All,
I am trying to configure a HTTP scenario. I want to configue the receiver HTTP channel to connect to the WebApplication server installed locally.
I am able connect to the WebApplication server from by browser by giving the URL http://inld50037931a.dhcp.blrl.sap.corp:8080/hello/.
In my receiver HTTP channel i have configure as below
Target Host : inld50037931a.dhcp.blrl.sap.corp
Service Number : 8080
Path : /hello.
But it is failing in run time with error in SXMB_MONI : HTTP-Server Code 500 Reason Internal Server Error Explanation Unknown Host.
And i checked the Trace and it is looking for taget URL :
http://inld50037931a:8080/hello
instead of
http://inld50037931a.dhcp.blrl.sap.corp:8080/hello
Kindly help me in correcting the receiver channel configuraion.
Best Regards,
Biswa

Hi Babu,
The given links might help you:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
HTTP Receiver Adapter
Regards,
Ajay.

MS-9109 HTTP Receive Error.....polite.ini configuration settings?

Similar Messages

Maybe you are looking for