MS-9126 mobo won't POST with ATI AIW 8500DV

I just purchased the new MSI Master-L MS-9126 (E7205 chipset) & it's not working with my ATI AIW 8500DV... System won't boot up, no POST or beep code. I reset the CMOS, then it will boot once, but getting "CMOS checksum error"... and if I reboot the system, it won't boot up again, no POST.. I have to reset the CMOS again, and then checksum error, problem occurs in a loop....
I tried different CPU, RAM, unplug all other devices (HD, cdrom, floppy, soundcard,etc), same problem. But once I changed the video card, everything is fine…. Seems like compatibility issue with my ATI AIW. I contacted ATI support but no help. Any advise is appreciated, perhaps new beta BIOS???
MB Model Name:   MS-9126
MB BIOS Vendor:   Phoenix-Award v6.00PG
MB BIOS Version:   1.00
CPU P4 2.40BGHz
Memory      Infineon 512MB DDR266 x2

i have the ms-9216 master-L board 7205 chipset(same as gnb max) only a workstation board without some of the extra;s such as blue tooth, firewire,pci 2.2, but all else the same , check stats on both boards.. and also have ati 9700 pro, havent ran into any issues, man i love this board!!!.. 8x agp fast writes, win xp sp1, kingston pc2100 512 ,, and get this all this worked as soon as i booted and updated winxp and directx9 installed my latest catylist driver for 9700 pro, no lockups in any of my games,, Quake, counter strike, command and conquer-Generals.and bf1942.
good luck

Similar Messages

MSI 890FXA-GD70 mobo won't post with two graphics cards (non-crossfire).

As title of topic says, I have a Sapphire 4870x2 graphics card in the PCIE 1 slot and in the #3 slot I have an ASUS geforce 9600gt passively cooled inserted. When powering on, no monitor signal. With either card in ANY of the slots alone, the motherboard will post as intended. I also cleared CMOS before using both and either together. This is somewhat frustrating as I would absolutely love to use the geforce 9600gt as a physx card in many of the games I play. Any advice on this one?

There are registry hacks available to make physx work with non-nvidia-primary graphics (ati) if you have an eligible graphics chip on-board. I fixed the issue now. Apparently, BIOS needed to know which graphics card was the primary - so by leaving the4870x2 connected first and connecting the 9600gt after (have a 120mm fan attached to the side of it with cable zip ties) things work as intended. So yeah, i'll get those registry hacks working and physx going on this rig. And please, if you're absolutely certain what you're saying say it. Otherwise, please do some research before telling me what I can and can't do.

P67S-C43: Won't POST with two sticks of RAM

Hi, my new P67S-C43 has a peculiar problem: It won't POST with two sticks of RAM. I've tried both of my sticks (2 x 2GB G.Skill Ripjaws DDR3-1600 CL9 1.5V) individually in Slot 1 and the system POSTs fine. When I insert the second stick in any other slot, the system proceeds to restart unsuccessully a couple of times and then it will not POST. Only one blue LED is illuminated. When the system is in this state I have to reset the CMOS in order to POST successfully with a single stick of RAM again, which made the problem difficult to diagnose and very annoying to troubleshoot (lose BIOS settings after every attempt with the clear).
Any idea of when we'll see a new BIOS? Are any betas available? I'd like to see if this is a BIOS problem before RMAing it.
Thanks.

Quote from: HU16E on 14-January-11, 16:52:36
Which BIOS do you now have? Current official is V1.5. It would possibly help to have a full listing of all the systems components. Work with the one RAM stick initially in the primary dimm slot, blue closest to CPU. Get the OS loaded, drivers, etc., then add the second stick in the other blue dimm slot later. I have a feeling the RAM is setting itself up wrong. Might try the manual settings of 1333 9 9 9 24 @ 1.50V's.
The BIOS was 1.5 out of the box but it's my understanding from another thread that there have been a slew of beta BIOSs released. I'm not going to load the OS until I get this straightened out. Also, both sticks would have the same settings with one stick or two installed. I fiddled with voltage, timings, etc but it still wouldn't work when I popped in the second stick. LIke I said, after every attempt with two sticks I have to clear CMOS or it won't work again with one stick. I'm hoping to try a newer BIOS before spending more hours on this, one setting at a time.
Also, I have a 2600K but the rest of the components are irrelevant. At one point I had everything but the CPU/fan, video card, and RAM unplugged and the mobo entirely out of the case. Still didn't work until there was only one stick.

(SOLVED) K8N SLI Platinum won't post with Saphire 5750

Hi everyone. Hope you all had a nice Xmas.
This is my first post on the forums. I’m from Portugal ,so I might write things that won’t make much sense to you but I´ll try to keep it simple.
I bought a Sapphire 5750 vapor-X for my kid's PC and I’m afraid I’m yet another one with the “black screen, no post” syndrome. I have tried the card on another system and it works fine.
What I did:
Remove old card (6800GT)
Put new card in
Reset CMOS
Switch PC on… no image on screen.
The fan on the graphics card starts spinning, the blue lights are ON, but no dice. My HDD LED stays on, my CD+DVD drives LEDs keep flashing but system won’t post, not even show MSI logo.
If I remove new card and get my old one back in the PC, it will post first time.
I have spent Xmas reading forums and haven’t found anything but a lot of ppl with the same problem and no real solution for it.
Hope you guys can help .

MSI forum:
Quote
Yup,I think I have the same issue with you,man.But I have solved it as I flash the latest beta bios V192.Contact MSI Online OCSS to get the BIOS to solve your issue...
https://forum-en.msi.com/index.php?topic=131546.0
1 thread hinting a board cant support Gen2 cards:
Quote
Comments:
Nov 18, 2009- BTW, I do not even get to BIOS screen at all. All is black as if no card is plugged in.
Nov 19, 2009- After a few hours of search the result is:
Some ASRock boards do not support GEN2 video cards (such as Radeon HD 5770).
Only solution found: New motherboard.
http://www.fixya.com/support/t3235972-asrock_wolfdale1333_d667_radeon_5770
AMD forum
Quote
If i remember right 1.0 is x8 and 1.1 is x16 and i far as i know it will never work as this issue go's back 2 years when the 8800GT hit the market and it would not work on PCI Express 1.0 but it would on 1.1
http://forums.amd.com/game/messageview.cfm?catid=260&threadid=124445&enterthread=y
driver heaven:
Quote
Warning about the HD5770 well at least on my computer the XFX HD5770 + a PCIe 1.0 slot = doesn't work. Again this was on my computer. I have another computer that it ran on fine using a PCIe 2.0 slot (Asrock 780g board), but my MSI K9A Platinum would not power that card. So you may need to replace your motherboard if it uses a PCIe 1.0 slot.
http://www.driverheaven.net/ati-graphic-cards/191317-5770-performance-increase.html#ixzz2jP3dOQ9e
allover ppl are having problems with 5xxx series on older systems.
i know some comments, solutions and explanations are closer to witchcraft than anything else but where there is smoke.....

MSI P67A-C43 B3 won't POST with Full RAM Installed

Hello all,
I recently purchased the MSI P67A-C43 B3 mainboard as a custom build
and have been having trouble with it. I have 16GB of ram for this board
(4x 4GB) and when I have 8GB installed (slots 1 and 3 filled), it POSTS fine.
When I fill ALL the slots for 16GB total, the board won't POST and just
power cycles ON and OFF and ON and OFF, etc...
I have replaced the memory and the PSU and am about to replace the
mainboard, but wanted to ask if anyone might have a suggestion for
troubleshooting before I do that.
Here's what I'm running on the system:
mainboard: MSI P67A-C43 B3
proc: Intel Core i7-2600K 3.4Ghz Unlocked
proc cooler: Corsair Hydro H80 CPU Liquid Cooler
ram: Corsair High Perform Vengeance 4GB DDR3 1600Mhz2x4 (4 of these)
HDD: OCZ TECHNOLOGY 120GB VERTEX PLUS SSD and Seagate 1TB LP Serial ATA HD 5900/32MB/SATA-3G
CD Drive: Sony Optiarc 24X DVDRW SATA
video: EVGA GeForce GTX 560 Ti FPB 1024MB GDDR5 PCB PCIe
PSU: Thermaltake 750W Modular Power Supply. 80+ Bronze
case: Thermaltake Chaser MK-I Full Tower Gaming Case
OS: Microsoft Windows 7 Professional 64Bit DVD
Any ideas here would be greatly appreciated! Thanks!

OK, had some time to go test your suggestions here
These are the 1.5V Vengeance RAM Modules. Tried installing 2 of the RAM on slots 2 and 4 on their own. System Boots Fine.
Went into the BIOS and changed the voltage applied to the RAM modules from
AUTO to 1.575V. On AUTO it says is applying 1.5V to the 2x 4GB modules.
Installed the full 4x RAM on all slots... and the system just shuts down. Power cycling again.
What do you think here? Bad Motherboard? Can't think of anything else to try... totally stumped!
Thanks!

P45 Platinum won't POST with full memory banks

I have 4 identical 2GB DDR2-800 modules. If I install 2 the system runs fine. If I install 4 the system will not POST, hangs with the memory code. I am replacing an old P35 Platinum that had exactly the same problem (though I was using 1GB modules with that instead of these 2GB modules). 2 modules fine. It doesn't matter which 2. 4 modules bad. Won't POST. Is there some setting that prevents you from using both banks unless you change it?

They are PNY Optima. I am running them at the default timings (I think the default is for BIOS to handle it itself with SPD). I probably wasn't clear before but both modules are installed in the same bank (both in orange or both in green). I just can't fill more than one bank and get it to POST. These modules all work fine independently. There is some board/BIOS issue that is not allowing me to use both banks. I had the same exact problem with my P35 Platinum with different modules. I could run one pair, but not two pair.

New P43 Mobo Won't POST

Here's the one line summary: Brand New MSI P43 Neo3-F 1.1 with Q6600 boots for 8 seconds, doesn't POST, turns self off, then back on for 1 second, then repeats.
Here's the full details. I've had this system for since June 2007. It was originally built with a XFX 680i LT mobo. Eventually, that system stopped booting (slowly degraded to no more POST) and I RMA'd the board. I got a new one that booted all of once before it refused to POST. I swore off XFX and went with this MSI. I have never seen the MSI POST. When I turn it on, it powers for about 8 seconds, then turns off for about 5 seconds, then turns on for about 1 second, then off for about 5 seconds and repeats. I was told my PSU could be too weak (I didn't agree, but figure it was worth a shot) I upgraded and I have the same results. Here is the current build:
MSI P43 Neo3-F 1.1
Q6600
XFX 7600GS - 128 MB, Dual DVI
2x1GB DDR2 RAM
7200 SATA HDD
2xDVD+RW
PSU: 750 W Corsair (provides 720W on 12V Rail)
I originally had a Rosewill 500W which provided 380W on the 12V Rail, which should be enough for the original setup according to my calculations. I got the new PSU and I'm sticking with it. Is it possible that the PSU on my original setup damaged the MSI board - in just a few minutes? Is it possible that the Q6600 is damaged? I have seen a lot of posts about the Quads not being supported until a specific BIOS version - is that what I'm running into?
I haven't seen anyone report the power cycle thing I'm running into with the MSI - what gives?

Quote from: flink on 01-May-09, 08:56:07
this is your mobo http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1720
Yes, that is my mobo.
Quote from: flink on 01-May-09, 08:56:07
look for the bios chip and for a little sticker on this chip. http://www.msi-forum.de/index.php?page=Thread&threadID=88764 --> 4. BIOS-Chip
I found the sticker and it is A7514 IMS230
Quote from: flink on 01-May-09, 08:56:07
do you have a cpu fan or water cooling ?
CPU Fan.

Help! Z77A-GD65 mobo won't post - Debug LED says dE - no beeps

I'm not sure where to start. I came home to find my computer off. Turning it back on results in all the lights and fans coming back on. No post and no beeps. Screens are just blank.
The 8 blue CPU phase LED lights above the CPU are all on. Nothing unusual there.
The Debug LED lights show "dE" which isn't documented at all in the manual. Does anyone know what this error code means?
Z77A GD65 mobo with corei7 3770 - SSD - 4x4GB Corsair RAM - No GPU. Otherwise nothing special.
Where's a good place to start? Reset the CMOS/BIOS? Swap out memory sticks?

http://www.ami.com/support/doc/AMI_Aptio_4.x_Status_Codes_PUB.pdf
D3 or DE?
0xD0 – 0xDF DXE errors
0xD3 Some of the Architectural Protocols are not available
Power off, battery removed, CMOS clear may be worth trying. Yes, test each stick individually in the DIMM2 slot.
Added: Might want to hold off swapping BIOS chips until some more investigation is completed. Don't want to take the chance of possibly corrupting the backup BIOS chip at this point.

P7N Mobo won't POST after a month, revisited

recieved new (not really new, it's been installed in something before) mobo from 2nd RMA, still no boot. amazing that the serial number was only sequence numbers away from the original. anyhow, system again 'barebones'd and still no POST. even tried a plain jane PCI video card to no avail. i'm shocked. MSI again offered to RMA, at this point what's the use? i ordered EVGA's model instead. at least they'll cross-ship if there's something wrong.
so, what are my options now except to RMA again? i don't want this board anymore, i'd rather have my dough back but i'm afraid it's $150 up in smoke.
guess i'll go try and find a port80 card from my lab and see if that'll tell me anything, because i'm pretty much done waiting for this thing to ever work right and so far sending it back 2x hasn't gotten me anywhere.

a bit of background:
Firstly, I'm a BIOS architect, so i'm not new to building/debugging systems.
system was originally working in following config: 2x1GB Patriot DDR2 800 (4-4-4-12, 2.1V set via BIOS), Q9300 2.5GHz (no overclock, stock voltages for everything else), 700W p/s, Zotac 8800GT 512MB PCIe 2.0 video, Samsung IDE DVD drive (master in IDE1), WD 40GB IDE drive (master IDE0), Seagate 160GB SATA I (SATA 1 port), PS2 keyboard/mouse, ethernet.
when the WD started to go (the OS disk) i cloned it to an 80GB Seagate SATA II laptop drive i had and ran that until i got a real replacement drive. The 80GB seagate went into SATA port 1 and the 160 moved to SATA 2. DVD i think i moved to IDE0. Things worked fine. New Seagate 250GB SATA II 3.5" drive arrived and i cloned the 80GB to that and swapped it into SATA port 1. THis is where the trouble started.
Upon rebooting, the system didn't come up all the way. I rechecked my drive connections and rebooted. The BIOS posted and indicated it had restored defaults due to 3x failed attempts to boot. (Of course this was only 2 boots, but i didn't pay much attention). I set the memory timing back to 4-4-4-12, 2.1V and checked all others (looked fine) and rebooted. system never posted after that.
Only thing system appears to do is power up and the CPU fan runs. Putting a 4 pin fan has the fan start up fast, then slows down (which to me says BIOS is booting enough to turn down the fan via the fan controller).
Figured it was a p/s issue, so tried one i had laying around, no POST.
Figured it was CPU problem, got a new one and tried again, no POST.
Thought perhaps it was a p/s issue again (the second one i had was pretty old, but came from a formerly working system), bought a brand new BFG 650W and tried again, no POST.
I then tried everything in the troubleshooting guides, removed from system to anti-static mat (i have a wrist 'leash' and the mat is properly grounded to house ground), and tried all combinations of no disk drives, no memory, single memory, tried old PCI video card, all no POST.
RMA'd mobo. They repaired something (didn't indicate what). Got system back, plugged it all back together and powered up, no POST.
Tried all troubleshooting tricks again, no POST.
RMA'd again, this time requested completely new mobo.
Got system back, plugged it all back together and powered up, no POST again!
Ordered EVGA mobo.
Got *another* RMA after talking to MSI tech support live. The only thing that he could suggest is that perhaps the new drive caused some problem to the board. This might be plausible, but SATA being hot pluggable, i wouldn't think that this could be an issue ever, even if i did plug it in while the system was on (which i didn't, every insertion/removal has been with system disconnected from power (removed A/C cable from p/s)).
Does *anyone* have any ideas that i might try?
(This is a system that's supposedly tested ok from MSI, and since i've got a different board coming if someone would like to toss me $100 i'd sell it rather then send it back). I'd rather keep it and get it working since i've spent my hard-earned cash and time on it already, but at this point it's been 6 weeks and i can't be without a desktop for any longer.

2012 Mac Pro / Mountain Lion won't boot with ATI 5770

2012 12 Core mac pro. I've got 2 GPUs installed:
- Quadro 4000 for mac
- ATI 5770
The Quadro is so loud and annoying that I'd like to unplug it for general use. Then plug it in for DaVinci or Premiere use.
Problem is when I unplug (power) from the Quadro and reboot, system gives me the Apple logo and then automatically restarts. Over and over. This is with Mountain Lion.
I tried booting to a drive with 10.6 and it booted up fine.
I keep searching for driver updates or something but everywhere says it's included in OSX?
Is this problem happening because there are 2 GPUs installed? Even though one is unplugged? Like PCI lane conflict or something?
Alex

I think you will need to remove it entirely, or plug the power back in. It does not seem to allow your Mac to work with a Bus connection, but no aux power.

Mobo won't work with internal or external isdn

2 of my buddy's bought themself 875P FISR mobo's, after i highly recomended it to them.
the mobo's run great except for this one major bug on it
you cant connect a isdn modem to it.
we've tested 2 isdn modems(pci internal & usb external) on both mobo's and they both do the same thing --> crash on isdn installation gives out some weird message irq not less or equal??????
both of these mobo's have the latest bios's installed on them(3.2) and we've tried clearing the NV ram/rom or something like that and that didn't seem to work + reinstalling winXP pro
Is this a known issue or is this a new prob.
their system specs:
both antec true 550 watt psu's
both 3Ghz CPU's with HT
both 1Gig Transcend Ram
both MSI 875P FISR Mobo
pc 1.
   runs sata raid0 with 2 X 120gig drives(very fast)
   transcend radeon 9600 XT
   standard cooling.
   onBoard sound
pc 2.
   single 120 sata hdd(not so fast)
    heculeze 9800 SE
   Peltier cooling system
   some 7.1 hometheater thing
Pleaze help.

Quote
irq not less or equal
There is a lot of documentation for that same error all over the web I was having the same trouble a while back with no relation to isdn at all. I was never able to pin it down. It was fixed with a reinstall.
You might want to do a 'google' on that error message and do a search on it at MS site too. Maybe with isdn in the search string too.
Make sure you have all your drivers for the motherboard updated, chipset etc...
As well as the driver for the modem itself. ISDN being a technology that is somewhat on the way out the door is receiving less and less support from the Manufacturers. Are your Modem drivers for XP specifically ? There is a good chance that a Win9.x driver would not work properly.
I had ISDN for a couple years. It was better than regular dialup but overall it was a major pain in the arse. Partially becuase the modem I had was a junkie one. It plugged up to serial. Thereby limiting my max speed to 115 instead of the possible 128. It was very sensitive to port settings and the like. Was too dadgummed expensive too.
Good Luck, Hope I helped a lil.
Jagou

MSI P6N Sli Platinum won't Post with E8500

Ok, I've been pulling my hair out on this one off and on for a couple of weeks, and I figured I'd finally just post here and hope for some advice.
I recently bought a C2D E8500 CPU on newegg to replace the E6420 I currently have running in my system. The motherboard is a P6N SLI Platinum with the v1.7 Bios. The problem is that whenever I swap the E8500 in for the E6420 the computer powers on, fans start spinning, and then it just sits. No beeps, no lights, nothing. When I put the E6420 back in the whole thing boots up just fine. I've cleared the CMOS two different ways (removing the battery and hitting the CMOS reset button), and nothing seems to help. I have tested the CPU in another machine, and it works just fine. The MSI tech support has told me that the problem shouldn't be happening, and has suggested that I RMA the board to them. I'd rather not be without my computer for 3-4 weeks, so I figured I'd post here and see if anyone had any advice before I pull the whole system apart and send the MB in.
PSU is a 700W OCZ
Graphics Card is EVGA 9800GT 512MB
Ram is 4GB AData
Let me know if anyone sees any obvious problems.
Tim

I please have a look here:
https://forum-en.msi.com/index.php?topic=123486.msg932471#msg932471
Sending the board to MSI to be serviced is probably your only option to solve this.

K8N Neo4 Platinum - won't post with cards in pci slots

Hi
Just completed a new build - with 3800 + Dual processor - everything works fine but when I plug a PCI card in any PCI slot the computer then refuses to even post.
I've tried different cards and all of the pci slots but it makes no difference. Could it be a driver problem ? When I remove the card and try again the computer then starts up as normal.
Any ideas would be greatly appreciated.
Cheers
Biamp

Quote
everything works fine but when I plug a PCI card in any PCI slot the computer then refuses to even post.
I've tried different cards and all of the pci slots but it makes no difference.
1: PCI cards are bad, most likely your problem
2: PCI slots on MB are bad, highly doubt this
3: PCI cards drawing to much power, very doubtfull
4: ?

P55-GD65 won't POST with SLI

Hi, I seem to have quite a strange problem - I have 2 nV 8800GTS 512MB cards, both work perfectly when "single", but as soon as I put them both in the PC won't start up - no signal to the display, no sign of booting. Interesting things are that the CPU phase LEDs are acting weird - after a few seconds, first 4 of them shut down and only LED #5 and 6 keep illuminated, sometimes after another few seconds the first 4 start flashing quite rapidly. Another thing is that one of the cards (always the one in the "lower" slot) keeps in the "startup" mode, with the fan on maximum RPM, the upper card quits it normally after a few seconds.
I suspected the PSU since it is rated only 650W, but both 12V rails are capable of powering each of the cards in 3D Mark, so I don't think it would be a problem for it to power them on startup.
Any ideas what may be the problem? Or at least a hint to narrow it down, since I now suspect both graphic cards, the PSU and the mainboard of being faulty and have no idea which to eventually replace.

Just did a bit of testing, the flashing LEDs thing turned out to be associated with Intel SpeedStep - apparently, as it lowers the multiplier, it also lowers the voltage down to approx. 0.95V and the LEDs go haywire. When I tried the SLI configuration with SpeedStep off, the LEDs remained lit and voltage readout on the multimeter was stable.
I also tried "stressing" the 12V rail by running both the GPU and the HDDs on it while running World In Conflict benchmark (don't really have anything better here at the moment) and it didn't seem to have any problems.
Just to clarify, according to the sticker on the PSU there are 4 12V rails, each 15A, one to CPU (4-pin connector), one to GPU (6 pin), one for IDE+SATA(+2nd GPU with an adapter) and one for I don't know what, with a 4-pin connector similar to the CPU one, only all 4 "slots" are perfectly square, no beveled corners as on the CPU one.
Anyway, I'll try to get someone to lend me some better PSU, but I doubt I would be successful, so if anyone has any more ideas on how to test it it will be greatly appreciated

P67A-GD65B3 won't post with more than 2 RAM sticks/P

Issue is as stated. On this board the dimm slots are listed as 1,2,3,4 (as marked on motherboard). The computer will consistently power cycle (not even post) when RAM is in any dual channel configuration. I've tried 4 sticks of memory (2 separate orders of 2x4GB). All RAM sticks work in non-dual channel mode. I've modified the voltage to 1.65. I've verified the timings are correct at 8-8-8-24. I've inserted 1 stick at a time, let boot all the way to windows, and inserted the next stick. I tried the inserting 1 at a time numerous different ways. Anything else I may have missed? If not, I guess its RMA time.

Quote
2 separate orders of 2x4GB
Check with G.Skill. I believe they only warranty & suggest one kit being installed. Differences in batches are noted as the excuse if memory serves me. UEFI/BIOS version 1.D was released by MSI to accomodate the non standard SPD profile programming, since a newer one, 1.E is installed, it rules a problem there out. It's also possible the RAM requires X.M.P. to be enabled to make them work correctly. Again, G.Skill is going to be the best source for advice on how to get their product to work.

** MS-9126 mobo won't POST with ATI AIW 8500DV **

Similar Messages

Maybe you are looking for

MS-9126 mobo won't POST with ATI AIW 8500DV