MS Access attach table error after migration

I ran the MS Access Migration Wizard 1.5.4 to convert an Access
97 Database to Oracle 7.3.3 (soon to be 7.3.4).
Everthing seemed to go ok, the mdb file shows the local and
remote attached tables, the queries are present etc. Also the
ODBC link is fine within the mdb file, in that I can browse the
data on the Oracle database.
However when I start the MS Access application which is in an
mde file, I get the following error :
modRefresh AttachTables Error: The Microsoft Jet database engine
cannot find the input table or query 'tablename'. Make sure it
exists
and that its name is spelled correctly. (3078)
The application continues to work fine if I put the original mdb
file back.
Is anybody able to help identify what the problem is or how to
turn on some debugging that might help. Any help appreciated as
I don't have a lot of experience with Access.
Thanks,
Mike.
null

Mike,
The Migration Wizard only supports one level of linked
tables.
Regards,
Marie
Robert R. Wagner (guest) wrote:
: Mike:
: I'm pretty new to the business of migrating data from Access 97
: to Oracle, but I'm pretty sure that we need to give up using
: linked tables when we do this. This was a (wonderful) benefit
of
: the Jet Engine.
: I'm now looking at using ADO and OLE-DB with the (eventually to
: be) migrated data. It's a whole new learning curve to climb!
: Cheers >>>>>> Robert
: Mike Connell (guest) wrote:
: : I have now realised the error is because Access doesn't seem
: to
: : support linking to already linked tables.
: : That is the mde file is running via linked tables to the mdb
: : file. If the tables in the mdb are renamed and replaced by
: : queries to new tables linked to an Oracle database, the mde
: : fails to find the tables it expects to use.
: : If anybody knows a workaround for running Access to allow
more
: : than one level of table linking, then please let me know.
: : Thanks,
: : Mike Connell
Oracle Technology Network
http://technet.oracle.com
null

Similar Messages

Configuration Frozen Error after migrating to Weblogic 11g console extensio

We are using the console extension property of weblogic.
The jar used to deploy the same works fine with weblogic9 but gives the below error after migrating to Weblogic 10.3
The project also uses struts-Tiles configuartion. Is there any specific configuration to do after migration with respect to console extension?????
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at org.apache.beehive.netui.util.internal.ServletUtils.throwServletException(ServletUtils.java:165)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:582)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1230)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
... 63 more
Caused by: java.lang.IllegalStateException: Configuration is frozen
at org.apache.struts.config.ForwardConfig.setPath(ForwardConfig.java:191)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processForwardConfig(ConsolePageFlowRequestProcessor.java:145)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
... 72 more

After more investigations I have more details:
1. the error does not occur if the base table does not have rowSelection=”single”
2. the error does not occur if the base table has rowSelection=”single” but the popup is raised with showPopupBehavior
3. the error only occurs when the base table has rowSelection=”single” and we call the popup as inline popup (taskFlow with jsf page)
I could not reproduce the error on a newly created application in Jdevelope 11.1.2.1, it only happens to migrated applications.
We can not give up to rowSelection=”single” because of master-detail structures.
Thank you,
Monica

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Dump error after migration.

Dear Members,
The driver program for the smartfrom which I have created is throwing a dump error after migration to another server, please suggest me a solution.
Thanks,
Subhendu Gouda

Hello Subhendu,
Just pass the FM name of your smartfom using a variable like "w_fmodule".
* Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSUBHENDU_TEST',
w_fmodule TYPE rs38l_fnam,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION w_fmodule
EXPORTING
control_parameters = w_cparam
output_options = w_outoptions
IMPORTING
job_output_info = t_otf_from_fm
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this solves your issue.
Cheers,
Suvendu

Session expired error after migration 11.1.1.1

We are taking a lots of session expired error after migrating our projects from 11.1.1.1. to the 11.1.1.0
How can we control session parameters in Jdev 11.1.1.1 and Web logic 10.1.3.1 ?
Thanks.

Hi,
its still the same setting in the web.xml file. However, I think the expiry you mean is the one raised by the client framework. As far as I remember there is no way to configure itslength. I'll take a not to see what the plans are in this regards. Can you confirm that its not the serve expiry but the message you get from ADF Faces RC?
Frank

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

The value returned from the load function is not of type numeric errors after migration to Coldfusion 11

I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?

This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">

<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>


<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>

<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>

<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
   this.sCountryName = "";
   this.sISOCode = "";
   this.sDHLCode = "";
   this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>


<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     if(isDefined("session.afr")){
      whichOne = "#session.afr.getsAFRNumber()#";
     } else {
      whichOne = "";
     iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
    </cfscript>
   <cfset this.iErrorID = iErrorID>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="get" datasource="#sDatasource#">
    SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: get: #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>

<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>

<cfif not checkID.recordCount>
   <cfreturn this.add()>
<cfelse>
   <cfreturn this.update()>
</cfif>
</cffunction>

<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>
<cftry>
   <cfquery name="add" datasource="#sDatasource#">
    SET nocount on
    INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
    VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
    SELECT @@identity as autoID
    SET nocount off
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: add: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>

<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
    AND idCountryID <> #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="update" datasource="#sDatasource#">
    UPDATE tblCountry
    SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
    sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
    sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: update: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>

<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="checkDependancies" datasource="#sDatasource#">
    SELECT idCountry
    FROM tblAddress
    WHERE idCountry = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("That Country is being used by an address, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="delete" datasource="#sDatasource#">
    DELETE FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent>

Buffer to small ORA-22835 error after migration from 9i to 10g

Hello Oracle-Experts,
I had to calculate hash-values for a corresponding clob-field which worked with oracle 9i (9.0.2.1)
After migration to oracle 10g (10.2.0.1.0) I get an ORA-22835 error (Buffer too small for CLOB to CHAR conversion.
Here is the output for the 10g version:
     SQL*Plus: Release 10.2.0.1.0 - Production on Mi Jun 13 16:19:28 2007
     Copyright (c) 1982, 2005, Oracle. All rights reserved.
     Verbunden mit:
     Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
     With the Partitioning, OLAP and Data Mining options
     SQL> CREATE TABLE test_conv (value CLOB);
     Tabelle wurde erstellt. (Table created.)
     SQL> DECLARE vLong LONG:= LPAD('M',4400,'M');
     2 BEGIN
     3 INSERT INTO test_conv(value) VALUES (vLong);
     4 END;
     5 /
     PL/SQL-Prozedur erfolgreich abgeschlossen. (PL/SQL procedure successfully completed.)
     SQL> SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv;
     SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv
     FEHLER in Zeile 1:
     ORA-22835: Puffer zu klein für Konvertierung von CLOB zu CHAR oder BLOB zu RAW
     (tatsächlich: 4400, maximal: 4000)
     (Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 4400, maximum: 4000))
This is the result with     9i
     Verbunden mit:
     Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
     With the Partitioning, OLAP and Oracle Data Mining options
     JServer Release 9.2.0.1.0 - Production
     SQL> CREATE TABLE test_conv (value CLOB);
     Tabelle wurde angelegt.     (Table created.)
     SQL> DECLARE vLong LONG:= LPAD('M',4400,'M');
     2 BEGIN
     3 INSERT INTO test_conv(value) VALUES (vLong);
     4 END;
     5 /
     PL/SQL-Prozedur wurde erfolgreich abgeschlossen. (PL/SQL procedure successfully completed.)
     SQL> SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv;
     DBMS_UTILITY.GET_HASH_VALUE(VALUE,1,POWER(2,30))
     478332438
Any help is appreciated.
Best Regards
Matthias

You have hit a bug, 3984527 - CLOB LARGER THAN 4000 INSERTED INTO VARCHAR2(4000) COLUMN IS.
You may want to check this metalink note: Note:388512.1 for further explanation and workarouds.
From the error message manual, Verbatim:
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: string, maximum: string)
Cause: An attempt was made to convert CLOB to CHAR or BLOB to RAW, where the LOB size was bigger than the buffer limit for CHAR and RAW types. Note that widths are reported in characters if character length semantics are in effect for the column, otherwise widths are reported in bytes.
Action: Do one of the following:
1. Make the LOB smaller before performing the conversion, for example, by using SUBSTR on CLOB
2. Use DBMS_LOB.SUBSTR to convert CLOB to CHAR or BLOB to RAW.
~ Madrid.

Open role permission error after migration EP6 to EP7

Hi all,
After migration from ep6(WAS 620) to EP7, there are some roles which can't edit permission by content administration.
The error message appears when open edit role permission.
========================= Error Start Line=========================================
ERROR: updateParentData - aclHandle is null for objectID - null
Exception ID:05:29_23/06/08_0006_9615650
EXCEPTION
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.aclEditor
Component class : com.sap.portal.admin.acleditor.ACLEditor
User : Administrator
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NullPointerException
at com.sap.portal.admin.editor.pane.OutPane.calculatePEObjectId(OutPane.java:210)
at com.sap.portal.admin.editor.pane.OutPane.createEditorLayout(OutPane.java:256)
at com.sap.portal.admin.editor.pane.OutPane.setupComponent(OutPane.java:150)
at com.sap.portal.admin.editor.pane.EditorPaneWrapper.mySetupComponent(EditorPaneWrapper.java:143)
at com.sapportals.admin.wizardframework.components.FlowContainer.setupComponent(FlowContainer.java:129)
at com.sapportals.admin.wizardframework.core.TrivialPaneFactory.getComponent(TrivialPaneFactory.java:35)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:229)
at com.sap.portal.admin.editor.Editor.doWizard(Editor.java:605)
at com.sap.portal.admin.editor.Editor.run(Editor.java:150)
at com.sap.portal.admin.editor.AbstractEditorComponent.doContent(AbstractEditorComponent.java:59)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
========================= Error End Line=========================================
Does anyone have idea about this problem ?

close

Match Merge error after migrated to OWB 10.1.0.4

My old mappings which were running fine are giving match merge errors after uograded from 10.1.0.2 to 10.1.0.4.
getting following error while deploying into new repository (10.1.0.4).
any suggestions please....
ORA-06550: line 856, column 17:
PLS-00103: Encountered the symbol "=" when expecting one of the following:
( - + case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null was inserted before "=" to continue.
Thanks
Arvinda

I did some more analysis. The error does not occur with new repositories, that are created with the Repos-Wizard after Software was upgraded to 10.2.0.2.
However, it does occur with all repositories that were migrated from 10.2.0.1 to 10.2.0.2, using the upgrade script as described in the patch set's installation notes.
The problem persists, even when the profiling user (i.e. schema) is removed, and a new one is initialised by the Design Client.

Error after migrating new copy control routine

Hi,
I have created a new copy control routine in dev environment. It works fine there. When we migrated the transport to all QA environments getting dumps that the form is missing. I checked the routine and form in VOFM and it does exists. Am I missing a step here or need to do something after migration?
-Minhaj.

go to se38 enter program name RV80HGEN - execute.
You need to generate newly created routines
You have to do this in each client where you transport this.
Edited by: Sampath Kumar on Nov 5, 2009 10:36 AM

Access request List issue after migration

I have migrated site sharePoint 2013 from metalogix tool.
Migration is from SharePoint 2013 to SharPoint 2013
I am getting one strange error while approving "Permission request" send by the users. I have matched columns of Access Request list(Hidden) from original site to New site , columns are matching, and also I have checked every column
on migrated site, ther are opening without error, so why I am getting this error , there are no logs for this.
One thing is diffrent is that on migrated site I am not gettign any data from Permission column check below, however On original site I am gettign data for this Permission column , what can be an issus ?
Please mark answer , if you think answer is helpful or correct.

Hello WillAdams92,
It seems you are experiencing permissions issues. You can repair permissions using Disk Utility, which comes with all Macs. The following article provides more information about the feature:
About Disk Utility's Repair Disk Permissions feature - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

RowKeySet error after migrating to Jdeveloper 11.1.2

We migrated our applications from Jdev 11.1.1.5 to 11.1.2. We encounter several issues. For some of them we found work around. Not for this one though.
Consider a jsff page with a table. A commandLink inside a column has to call a popup.
We get the error whenever we call a taskflow in an inline popup that contains a jsf page.The error does NOT occur if the popup is part of the page (showPopupBehavior).
The error shows only in console and even it does not cause crash, it sounds dangerous.
Code extracts:
this is causing the error:
<af:column sortProperty="BreakdownSupName" sortable="true" headerText="Name" id="c19">
<af:commandImageLink text="#{row.BreakdownSupName}" id="cilEditBv" partialSubmit="true"
action="editNonContractVendor" useWindow="true"
windowEmbedStyle="inlineDocument" windowHeight="435" windowWidth="500"
returnListener="#{backingBeanScope.vendorManagerBackingBean.editBreakdownVendorCommandImageLink_ReturnListener}">
<af:setPropertyListener from="#{row.BreakdownSupId}" to="#{pageFlowScope.supId}"
type="action"/>
<af:setPropertyListener from="#{pageFlowScope.vendorManagerPageFlow.readOnly}"
to="#{pageFlowScope.readOnly}" type="action"/>
</af:commandImageLink>
</af:column>
this is Not causing the error:
<af:column sortProperty="WoNumber" sortable="false" headerText="Reference" id="c1" width="80">
<af:commandLink text="#{row.WoNumber}" id="cl2" partialSubmit="true"
rendered="#{row.SupinvtypCode ne 'MISCINV'}">
<af:showPopupBehavior popupId="::popupROEdit" triggerType="click"/>
<af:clientAttribute name="completionDate" value="#{row.CompletionDate}"/>
<af:clientAttribute name="wouniId" value="#{row.WouniId}"/>
<af:clientAttribute name="worordId" value="#{row.WorordId}"/>
<af:clientAttribute name="equEquId" value="#{row.EquEquId}"/>
<af:clientAttribute name="repinvstaCode" value="#{row.RepinvstaCode}"/>
</af:commandLink>
</af:column>
here is the error in the console:
<RowKeySetAttributeChange$GetOldValueAndUpdate> <_updateKeySet> Failed to apply row key set attribute change. Reason : {1}
java.lang.NullPointerException
     at oracle.jbo.uicli.binding.JUCtrlHierNodeBinding.<init>(JUCtrlHierNodeBinding.java:212)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierNodeBinding.<init>(FacesCtrlHierNodeBinding.java:71)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding.createNodeBinding(FacesCtrlHierBinding.java:104)
     at oracle.jbo.uicli.binding.JUCtrlHierBinding.createRootBinding(JUCtrlHierBinding.java:410)
     at oracle.jbo.uicli.binding.JUCtrlHierBinding.getRootNodeBinding(JUCtrlHierBinding.java:97)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$HierCurrencyRowKeySet.getRowIterator(FacesCtrlHierBinding.java:1421)
     at oracle.adfinternal.view.faces.model.binding.CurrencyRowKeySet._computeCurrentRowKey(CurrencyRowKeySet.java:125)
     at oracle.adfinternal.view.faces.model.binding.CurrencyRowKeySet.iterator(CurrencyRowKeySet.java:41)
     at java.util.AbstractCollection.addAll(AbstractCollection.java:303)
     at org.apache.myfaces.trinidad.change.RowKeySetAttributeChange$GetOldValueAndUpdate._updateKeySet(RowKeySetAttributeChange.java:136)
     at org.apache.myfaces.trinidad.change.RowKeySetAttributeChange$GetOldValueAndUpdate.invokeContextCallback(RowKeySetAttributeChange.java:117)
     at org.apache.myfaces.trinidad.component.UIXCollection.invokeOnComponent(UIXCollection.java:1170)
     at oracle.adf.view.rich.component.rich.data.RichTable.invokeOnComponent(RichTable.java:620)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.invokeOnComponent(ContextSwitchingComponent.java:222)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at oracle.adf.view.rich.component.fragment.UIXInclude.invokeOnComponent(UIXInclude.java:161)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnNamingContainerComponent(UIXComponentBase.java:1693)
     at oracle.adf.view.rich.component.fragment.UIXRegion.invokeOnComponent(UIXRegion.java:625)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.invokeOnComponent(ContextSwitchingComponent.java:222)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at oracle.adf.view.rich.component.fragment.UIXInclude.invokeOnComponent(UIXInclude.java:161)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnChildrenComponents(UIXComponentBase.java:1627)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.invokeOnComponent(UIXComponentBase.java:1750)
     at org.apache.myfaces.trinidad.component.UIXDocument.invokeOnComponent(UIXDocument.java:106)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1299)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:677)
     at org.apache.myfaces.trinidad.change.RowKeySetAttributeChange._updateRowKeySetInPlace(RowKeySetAttributeChange.java:86)
     at org.apache.myfaces.trinidad.change.RowKeySetAttributeChange.changeComponent(RowKeySetAttributeChange.java:53)
     at org.apache.myfaces.trinidad.change.SessionChangeManager._applyComponentChanges(SessionChangeManager.java:399)
     at org.apache.myfaces.trinidad.change.SessionChangeManager.applyComponentChangesForCurrentView(SessionChangeManager.java:73)
     at org.apache.myfaces.trinidadinternal.application.ViewDeclarationLanguageFactoryImpl$ChangeApplyingVDLWrapper.buildView(ViewDeclarationLanguageFactoryImpl.java:343)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:982)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:334)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:232)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
I appreciate any input on this issue.
Thank you,
Monica

After more investigations I have more details:
1. the error does not occur if the base table does not have rowSelection=”single”
2. the error does not occur if the base table has rowSelection=”single” but the popup is raised with showPopupBehavior
3. the error only occurs when the base table has rowSelection=”single” and we call the popup as inline popup (taskFlow with jsf page)
I could not reproduce the error on a newly created application in Jdevelope 11.1.2.1, it only happens to migrated applications.
We can not give up to rowSelection=”single” because of master-detail structures.
Thank you,
Monica

Access NAST table immediately after creation of sales order (va01)

Hi All,
I want to access the nast data for the newly created sales order from va01. I tried to use program exits:
userexit_save_document and userexit_save_documnr_prepare
and plu the BADI BADI_SD_V46H0001 method EXIT_SAPLV46H_003.
the breakpoint is not stoping there even if I have given.
Please suggest any enhancements are there for such functionality.
The flow is like this.:
when user clicks on the save button after entering the data for sales order creation, the email/fax will be send to the contact persons for the output type and I want to update the nast table DATVR entry so that it will be marked as processed entry.
rgds
Madhuri

I am not sure what you want, but I think it is not the right way to realize the flow.
When a sales order is saved, the process of issuing output will be handled by another program RSNAST00 (T_CODE: WE15)immediately or via a scheduled job due to output configuration , and the nast table will be updated at the same time. i think there is no need to update the nast table by yourself.

SBS 2008 - SBS Console and AD errors after migration to new hardware

Hi there,
I'm trying to work out how to fix some of the errors and random behaviour I'm experiencing with the SBS 2008 console and AD related matters since I had to quickly migrate SBS 2008 to new hardware using Windows Server Backup after a failure of the old server.
In my haste to get our email and ftp services back up and running (which use Smartermail and Filezilla respectively instead of Exchange etc) I overlooked the fact that the new server had 3 NICs installed and not one and so restored SBS 2008 and loaded up new
drivers for those and other hardware that had changed (such as the graphics card and mobo. I have since removed the two additional NICs by disabling them on the mobo).
Whilst I got the server up and running again with email and ftp services, even though I currently don't use any AD related stuff directly I have since noted that if I try to say view a list of users that I had previously created via the SBS console, more often
than not it will show no users, and then randomly it will (but when you do see them you can't edit or delete them. I'm aware that I have probably broken a number of golden rules in doing this 'migration' but having a metaphorical gun to my head meant that
I rushed things out of desperation.
Common errors that I experience generally will say things like 'Current security connect is not associated with an Active Directory domain or forest' if I try to list users, or DC not found for domain "xyz.local' etc. I have been searching the net and
trying out some things to fix this but I'm like a dog chasing its tail as I'm not so clued up on server related issues as I am with workstation problems, so if anyone could at least point me in the right direction I would be very grateful. If you require any
info from me (eg diag logs etc) I will be happy to provide them!
Regards,
Dave

Hi Dave,
Based on current situation, please run SBS BPA and fix all that it can find, then monitor the result. For more details, please refer to the following KB.
Windows SBS Best Practices Analyzer (BPA)
Meanwhile, please refer to the following article and repair SBS console.
Repair the Windows SBS 2008 Console
By the way, I noticed that you had got some error messages (such as: “DC not found for domain” and so on). Would you please let me know complete error messages? In addition, when you migrate SBS 2008 to the new hardware, had you done any preparation for
that Source Server? For more details, please refer to the following article.
Migrate Windows Small Business Server 2008 to New Hardware
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

MS Access attach table error after migration

Similar Messages

Maybe you are looking for