MS access database prompting for username and  password

Hello,
  When I try to run a crystal report that is connected to a (Access Database) from crystal server 2013, I get prompted for a username and password. Im not sure what im doing wrong, Ive tried creating a ODBC connection, change the SAP service to run under a domain user account, recreated the report with a different file path.  but still no luck, please help im at a lose.
Thank you

Hello,
Refer please to the following kbas, probably this can help you :
http://service.sap.com/sap/support/notes/1270997
http://service.sap.com/sap/support/notes/1661997
Regards,
Asma

Similar Messages

  • Prompting for username and password for opening

    Hi,
      The domain of my organisation is xyz.com. So when try to access any office doc from the office network it opens the office docs without any prompt in office client. But whenever try to access them using VPN or citrix it asks for the username and password.
    Then if I give credentials or cancel it irrespective of that it opens the doc for me.
    The sites are in trusted zone. It is happening for 2010 and 2013 both. But for pdf it is not prompting.
    Why it is asking for credentials and how to mitigate this so that it opens directly from everywhere.

    You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
    In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
    You can check also this article
    http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
    MCITP|MCTS SharePoint| SharePoint Performance blog

  • Word 2010 prompts for username and password when opening a document on trusted website

    Hi Guys,
    We have a website (not sure if the site is a sharepoint site) on our trusted domain that asked for username and password when trying to access it. I added the site to our trusted sites zone and this resolved the issue however when I try to open word documents
    I get prompted for usernames and password again if I cancel the credentials box the document opens with no issues. 
    Below is some of the steps i have taken
    - Tried opening other non office documents (e.g. PDF, JPEG) and they open with no issues
    - Tried to opening the word documents with a system that only had word pad install and not Office 2010 and the documents open with no issues so it looks like it's an office 2010 problem 
    Can you please advise how I can resolve this issue and if this is a client issue or an issue on the web server thanks

    Hi,
    This issue is caused by the Office suit itself. When Internet Explorer opens an Office document, the appropriate Office application is started with the path of the document. The Office application then tries to access the document directly from
    the server. This differs from other browsers and other file types. Most browsers download the file and call the application to open the file from the local cache. However, when this occurs, if the opened file is changed and saved,
    the changes are only made to the local copy and not to the server copy.
    To establish the richest experience possible, the first thing that the Office application does is communicate with the server to determine the server type and what web authoring protocol is available. The application does this by making
    an OPTIONS request directly to the server.
    As a new process accessing the server, the Office application is required to renegotiate authentication. This method is more secure than a method in which the new process uses an existing authentication that was established by the browser. 
    Please try the following methods:
    An alternative with full functionality but with a calculated risk
    Client approaches that can reduce the impact
    Alternative configurations when the web server does not support DAV or reduced functionality is acceptable
    For more detail information, please refer to the following link:
    http://support.microsoft.com/kb/2019105/en-us
    Thanks
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • Users prompted for username and password after sharing removed from servers

    Hello Community
        On Sharepoint 2010 Server using the UI in a 2 server farm with an intranet running on it and everything functions as it should.  However it was noticed that from a users computer when in "Windows Explorer" if "Network"
    is clicked the 2 servers are visible.
        The problem is that when the server are clicked on in Windows Explorer the files and folders on the hard drive of the servers are visible too.
        Subsequently I logged onto the server and when into "Properties' - "Sharing" and
    unchecked the checkbox to "Share this folder".
        That solved the problem of the users being able to see and access the files
    and folders on servers hard drives but now when the users log onto the intranet
    they are prompted for a user name and password and even when they provide the user
    name and password and the page is returned the prompt appears on the screen again(then they cancel out).
        What can be done about the user being prompted for username and password without sharing the drives on the servers ?
        Thank you
        Shabeaut

    What exactly was shared out from the SharePoint server's file system? There are certain things that are shared by default.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Micrsoft Outlook somtimes prompting for username and password

    hello All ,
     I Have Exchange 2010 sp3 installed two mailbox servers & two HUB & CAS Servers  and Outlook sometimes  prompting for username and password .
    how can fix it .
    Thank you

    Hi,
    Please check the following points:
    1. Does the issue happen to your external users or internal users?
    2. For all users or some specific users?
    If the issue happens to internal users, please configure the authentication in Outlook Security tab with Negotiate Authentication to have a try.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Network printers prompting for username and password

    With the more recent OS upgrades I can now see my printers on my home network. Very cool.  When I select one to print, I am prompted for a username and password. I have tried my network keys with no luck and cannot set a password on my printers. Is this unusual and if not, what should I be using?

    You can try to take a fiddler trace in both scenarios and then search for the differences. This issue seems to be related with your network configuration that with the product itself.
    In fiddler you can identify what verb is requesting for credentials and from there you can go further with troubleshooting.
    You can check also this article
    http://blogs.technet.com/b/office_integration__sharepoint/archive/2014/02/24/users-are-prompted-for-username-and-password-when-opening-an-office-file-from-a-web-server.aspx
    MCITP|MCTS SharePoint| SharePoint Performance blog

  • Lync keeps prompting for username and password.

    Hi All,
    Lync 2013 prompt for username and password.  The request for username and password happens intermittently.
    Appreciate any help.
    Thanks
    denciod

    This kb is helpful to troubleshoot this issue:
    https://support.microsoft.com/en-us/kb/2298541
    There are solutions for Lync users and Lync administrators, choose the method depending on your role.
    -Jeff

  • Outlook 2013 on Windows 8.1 keeps prompting for username and password.

    Hi,
    I have a HP Pavillion TouchSmart laptop with MS Windows 8.1 OS. I had installed MS Outlook 2013 Standard. This laptop is joined to the domain like many of my users, however, it keeps prompting for username and password. The emails are still able to send
    and receive without any problem.
    I have tried to check the connectivity, both cables and wireless are well connected.
    I have tried to reinstall the Outlook 2013, but it still occurs.
    Attempted to recreate profile but it still occurs.
    For the configuration:
    I have selected negotiate authentication, and have unchecked the box that states
    "Always prompt for login credentials"
    Please advise.
    Thank you.

    Hi,
    We can also follow this forum FAQ to troubleshoot this problem:
    Why does Outlook keep prompting for password
    http://social.technet.microsoft.com/Forums/en-US/bcd2d9c2-1a1b-4446-bf32-69fee8cdf11b/why-does-outlook-keep-prompting-for-password?forum=outlook
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Prompt for username and password when executing servlet

    In Weblogic 5.1 when I set the username and password in weblogic.properties file, it prompts for the usertname and password when I execute the gatewayServlet
    weblogic.allow.execute.weblogic.servlet.servlets/gateway.administration=vijay
    weblogic.password.vijay=password
    But I guess this is not the way it can be implemented in 8.1. Please let me know how I can prompt for username and password when executing the servlet. I dont want it to be done programatically. Please let me know whether I can set anything on the properties file.
    Thanks
    Vijay Subramanian

    You can use Apache ACLs, http://httpd.apache.org/docs/1.3/howto/auth.html
    GoodEvening!
    I'm developing a web application using jsp
    technology.
    When the user digit:
    http://<machine address>:<port>/<applicationName>
    I would that a browser prompt login is diplayed to
    the user for enter him username and password,
    before loading the index.jsp page. Is possible
    without using awt or swing components?! using only
    the browser's prompt dialog?!
    p.s.
    sorry 4 my bad english! ;-)

  • How to make dyn/admin not to prompt for username and password?

    Hello all
    How to make dyn/admin not to prompt for username and password? I am writing a selenium job to automate cache invalidation to load test a production issue we are facing. Selenium is opening a fresh firefox session and prompting for username and password every time. I am also trying to modify my script such that it will use the same session again and not prompt for username and password. But I thought of asking this question in the group.
    Your inputs will help a lot.
    Thanks,
    Sundar

    Hi,
    You can set enabled property of /atg/dynamo/servlet/adminpipeline/AuthenticationServlet/ to false. It will not prompt for authentication.
    Gopi

  • Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

    So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally.  Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
    works) which also starts locking users AD accounts out due to failed login attempts (somehow).  If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues.  Once Outlook has authenticated, I can
    turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
    Any ideas?

    Hi,
    According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
    If I misunderstand your concern, please do not hesitate to let me know.
    It’s normal. This caused by the difference between basic authentication and NTML authentication:
    Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
    but in all earlier versions, you will have to enter creds every time.
    NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
    at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • Browser prompting for username and password to access enterprise manager.

    I've just installed Internet Directory 10.1.4.0.1 and am having trouble connecting to Application Server Console in Enterprise Manager.
    When I try to go to the url http://localhost:18101, a dialog pops up asking for a username and password. In firefox it says 'Enter username and password for "enterprise-manager" at http://localhost:18101'. IE6 just says, 'enterprise-manager'. I have tried various sets of credentials for this - my network userid and password; and ias_admin, orcladmin, sys and sysman, all with the passwords I specified at install time. None of these work. If I cancel the dialog box I get a '401 Unauthorised' page. I'm sure this is coming from apache and is basic web page authentication, and not an enterprise manager login.
    Has any one seen this before?
    I can connect through directory manager, and I can connect to the database console for the metadata repository.
    emctl status iasconsole shows that it is running.
    Windows XP Pro SP2 standalone (ie not part of a windows domain)

    trying to access my college intranet form home
    Contact your college network support.  The syntax for specifying your authentication may be different than you usually use when you are just connecting there locally.
    Robert Aldwinckle

  • SharePoint 2010 Word, Excel Office Docs keep prompting for Username and Password

    Users access SharePoint externally. They have the URL in their IE Intranet zone. They can login and browse OK but when they click a Word, Excel or Office document they get prompted for Windows Username and Password. This works but is never saved, so every
    time they try to open a Word Document they get a blank Windows Username and Password prompt.
    I have tried every suggestion I can find but nothing works

    Hi BayTree,
    Thanks for the sharing and have a nice day.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Using Proxy on Lion - Continually being prompted for username and password

    I am looking at Lion in my studio setup at the moment and so far only a few things I am not happy with. One of these though is really annoying and in it's present form would stop me from using it in production.
    I have setup the proxies in the Network tab as they are in 10.6.8 but I continually get prompted for my username and password. Not an issue if it was my machine and I would be using at home for instance but in the studio no. It could be anyone using the machine and some people do not have proxy access.
    I do not want to store in the general network settings as a default username for the machine as there is not one. Is there a way of seeing what is trying to look out to the internet? Would little Snitch help here?
    Dialogue box I would like to get rid of it the red ! one below, as the only way to avoid this is by typing in a user name and password into the Network Preferences settings
    I do not mind this one below as it is usually only appears when you require it and not randomly during the day.

    I have installed Little Snitch and left running for the day.
    So far helpd is the main culprit, so is there a way of disabling this other than using little snitch?
    If only Little Snitch, has anyone deployed to around 25 Macs so that the user doesn't really notice?

  • [Maybe solved] Repeated prompts for username and password on HTTP(S)

    I'm new to IOS but I'm taking ICND 1 and ICND 2 to catch up. I've gone as far as configuring a 3560 switch from "scratch" in a test environment, and am in part one of ICND 2.
    Setting this switch up for HTTP administration, I've been prompted repeatedly for my username and password both when using a browser directly and when using Cisco Network Assistant (currently 5.5). This is different from the production switches I'm working with, that will prompt me once only and let me work. At first I suspected this was because I'm trying to use SSL and an in-house certitficate authority to sign the switch's certificate, but this is happening in plain HTTP as well.  If I'm persistent enough, I eventually get the pages or configuration screens I want.
    The difference between the production 3560s and my testing one, is the test one uses IOS 12.2(53), the current version.  The production ones use 12.2(25)SEE3 through 12.2(35)SE5 and probably everything in between.  I'm also experimenting with the releases that includes the web-based device manager on my test switch, but the behaviour is similar whether the image has the web-based manager or not.

    In an update to this problem, I've reverted the switch I've been testing back to 12.2(35)SE5, which is what the majority of my production 3560s use. It appears to behave in the same fashion: Repeatedly asking for credentials over HTTP(S).
    While my non-production switch has a local user database set up, my production switches use two ACS servers.  The relevant bits of the running config are:
    aaa new-model
    aaa group server tacacs+ mcbhtacacs
    server 10.1.2.221
    server 10.1.2.222
    aaa group server radius mcbhradius
    server 10.1.2.221 auth-port 1645 acct-port 1646
    server 10.1.2.222 auth-port 1645 acct-port 1646
    aaa authentication login default group mcbhtacacs local
    aaa authentication login LOCALAUTH local
    aaa authorization exec default group mcbhtacacs
    aaa accounting send stop-record authentication failure
    aaa accounting exec default start-stop group mcbhtacacs
    aaa accounting commands 1 default start-stop group mcbhtacacs
    aaa accounting commands 15 default start-stop group mcbhtacacs
    aaa accounting system default start-stop group mcbhtacacs
    aaa session-id common
    tacacs-server host 10.1.2.221 key 7 [censored]
    tacacs-server host 10.1.2.222 key 7 [censored]
    tacacs-server directed-request
    radius-server host 10.1.2.221 auth-port 1645 acct-port 1646 key 7 [censored]
    radius-server host 10.1.2.222 auth-port 1645 acct-port 1646 key 7 [censored]
    radius-server source-ports 1645-1646
    Another switch that does work without repeated prompting has these relevant bits:
    aaa new-model
    aaa group server tacacs+ mcbhtacacs
    server 10.1.2.221
    server 10.1.2.222
    aaa group server radius mcbhradius
    server 10.1.2.221 auth-port 1645 acct-port 1646
    server 10.1.2.222 auth-port 1645 acct-port 1646
    aaa authentication login default group mcbhtacacs local
    aaa authentication login LOCALAUTH local
    aaa authorization exec default group mcbhtacacs local
    aaa accounting send stop-record authentication failure
    aaa accounting exec default start-stop group mcbhtacacs
    aaa accounting commands 1 default start-stop group mcbhtacacs
    aaa accounting commands 15 default start-stop group mcbhtacacs
    aaa accounting system default start-stop group mcbhtacacs
    aaa session-id common
    tacacs-server host 10.1.2.221 key 7 [censored]
    tacacs-server host 10.1.2.222 key 7 [censored[
    tacacs-server directed-request
    radius-server host 10.1.2.221 auth-port 1645 acct-port 1646 key 7 [censored]
    radius-server host 10.1.2.222 auth-port 1645 acct-port 1646 key 7 [censored]
    radius-server source-ports 1645-1646
    10.1.2.221 and 10.1.2.222 are the ACS servers, running ACS 4.1 and are linked to a pair of Active Directory domain controllers.
    Aside from host names, these two switches appear to have an identical AAA configuration.  So why would the first switch repeatedly ask for credentials over HTTP when the second switch with the same software does not?

Maybe you are looking for