MS Access VB and RFC

Hello,
Every Time i try to 'Create a Server object and Setup the connection'
Set R3 = CreateObject("SAP.Functions")
MS Access prompts a
'Automatisierungsfehler (Fehler 440)'
'Das angegebene Modul wurde nicht gefunden.'
'Error 440'
'The given modul wasn't found'
Of course I have installed the librfc32.dll.
Any help would be appreciated.
Message was edited by: Gregor Wilhelm Sure

Hi Gregor,
As far as i know you need to use:
Set R3 = CreateObject("SAP.Controls")
Also it is possible that you miss itole.ocx. You need to have the following in your code for that:
Object = "{E5121320-399E-11D0-B72C-080009D93142}#4.6#0"; "itole.ocx"
Regards,
Rob.

Similar Messages

Difference between BAPI and RFC?

Difference between BAPI and RFC?
also where to use BAPI and where to use RFC?

Hi,
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Regards,
Prakash

Difference Between BAPI And RFC in ABAP

Hi,
i want to know difference between BAPI and RFC in SAP,
can we call SAP GUI screen from NON SAP System Using BAPI.
Reg,
Hariharan

Hi Ravishankar,
The difference is not importat while you understand the concept.
I think, RFC is the protocol for calling functions from external systems in R/3.
I understand like BAPI a series of complet functions that SAP offers you for use and model a business use.
But if I need program a function that can be called for external system i would call it RFC_NAME, because is a unique function that makes a single task.
In other words, the difference i think is about work idea more than another thing.
RFC
A remote function call is a call to a function module running in a system different from the caller's. The remote function can also be called from within the same system (as a remote call).
RFC consists of two interfaces : A calling interface for ABAP Programs and a calling interface for Non-SAP programs.
The RFC Interface takes care of :-
- Converting all parameter data to the representation needed in the remote system
Calling the communication routines needed to talk to the remote system.
Handling communications errors, and notifying the caller, if desired ( using EXCEPTIONS paramater of the CALL FUNCTION).
BAPI
BAPIs are standardized programming interfaces (methods) enabling external applications to access business processes and data in the R/3 System.
BAPIs provide stable and standardized methods to achieve seamless integration between the R/3 System and external applications, legacy systems and add-ons.
BAPIs are defined in the BOR(Business object repository) as methods of SAP business object types that carry out specific business functions.
BAPIs are implemented as RFC-enabled function modules and are created in the Function Builder of the ABAP Workbench.
The most critical difference btwn BAPI and FM is that BAPI can be wrapped in Business objects whereas RFC cant.
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Check these Links out
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm
Refer following SDN threads:
Diff. Between BAPI and RFC
Re: BAPI and RFC
Hope this resolves your query.
Reward all the helpful answers.
Regards

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Difference betrween BAPI and RFC

Hi All
Can anyone tell me the difference between BAPI and RFC.
I am unable to find it out ,except one,ie BAPI is based on object oriented concept .
please justify your answers with real scenerios.

Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
BAPI
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module
ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access.
Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects.
You create business objects and those are then registered in your BOR (Business Object Repository)
which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
In this case u only specify the business object and its method from external system
in BAPI there is no direct system call. while RFC are direct system call.
Some BAPIs provide basic functions and can be used for most SAP business object types.
These BAPIs should be implemented the same for all business object types.
Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs.
Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
Difference Between BAPI and RFC
What is the main difference between BAPI and RFC and difference between BAPI and BDC?
BAPI is used only when it is available for the particular transaction like Delivery Sales order. but BDC can be used for any
transaction which have screen and fields.
BAPI is directly updated the database instead BDC run through the screen flow.
So BAPI can't handle all the flow logic checking and enhancement put by programmer to faciliate the user requirement.
Difference between BAPI and BDC:
BAPI is a higher end usage for tranfering the data from SAP to non-SAP and vice-versa. for ex: if we are using VB application,where in that we want to connect to SAP and retireve the data,and then change and update the data in SAP for that purpose we can use that.
Apart from that, we can also use it for Uploading/Downloading the data from SAP to Non-SAP like BDC, provided we have an existing BAPI for that.
BAPI function modules will also do all the checks required for data integrity like Transactions for BDC.
There is one more advantage using BAPI instead of BDC. When we go for upgradation, there might be pozzibility to change the screen elements for transactions depending on the requirement. In that case,our BDC pgm may or may not work (depending on the screen changes they have made). Unless and until we prepare new BDC we cant use the old BDC pgm. But in BAPI, SAP promises that they are going to keep the old BAPI and for new functionality they will provide an upgraded BAPI. Until we write a new BAPI pgm, we can use the exisitng BAPI pgm.
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA.
In this case you only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI. It is not possible to connect SAP to Non-SAP systems to retrieve data using RFC alone. RFC can acces the SAP from outside only through BAPI and same is for vice versa access.
RFC is the protocol used by SAP for remote communication, that is, for communications between remote (independent) systems. RFC is used for communications between two independent SAP systems, or for communications between an SAP system and a non-SAP system, such as an external application. It can also be used for communications between modules on the same system. Using the RFC interfaces you can extend the functionality of R/3 applications from an external program.
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
also refer these threads
What is the difference between RFC and BAPI?.
whats difference between rfc and bapi?
difference between rfc & bapi
difference between RFC and BAPi
Difference between BAPI and RFC?
also chk this
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
regards,
srinivas
*reward for useful answers*

IDOC and RFC/PROXY Scenarios

Is there a way to practice IDOC or RFC Scenarios if you only have access to the XI System? So you have XI abap and Java but no R/3 System...
Can someone tell me how I can practice IDOC and RFC scenarios please

It is possible to practive IDOC & RFC scenarios with XI's abap stack as sender & receiver of IDOCs and RFCs with the "XI" in the middle....
However, the problem might be the IDocs & RFCs might have to be created from scratch to test these out....
If you have some IDOcs that you can use in XI abap stack, have the program that generates this IDOc and when(if) XI abap stack receives this, the processing module to process this IDoc...
Similarly, the RFC FM has to be available on XI ABAP so that it can bhe invoked from the RFC interface..
Thanks.
Message was edited by:
Renjith Andrews

Any body explain me the differrence between BAPI and RFC

Hi gurues,
The main difference between rfc and bapi is calling the non sap system. Other than that what r the differrence . How sap modules works other machine without sap is installed.

The difference is not importat while you understand the concept.
I think, RFC is the protocol for calling functions from external systems in R/3.
I understand like BAPI a series of complet functions that SAP offers you for use and model a business use.
But if I need program a function that can be called for external system i would call it RFC_NAME, because is a unique function that makes a single task.
In other words, the difference i think is about work idea more than another thing.
RFC
A remote function call is a call to a function module running in a system different from the caller's. The remote function can also be called from within the same system (as a remote call).
RFC consists of two interfaces : A calling interface for ABAP Programs and a calling interface for Non-SAP programs.
The RFC Interface takes care of :-
Converting all parameter data to the representation needed in the remote system
Calling the communication routines needed to talk to the remote system.
Handling communications errors, and notifying the caller, if desired ( using EXCEPTIONS paramater of the CALL FUNCTION).
BAPI
BAPIs are standardized programming interfaces (methods) enabling external applications to access business processes and data in the R/3 System.
BAPIs provide stable and standardized methods to achieve seamless integration between the R/3 System and external applications, legacy systems and add-ons.
BAPIs are defined in the BOR(Business object repository) as methods of SAP business object types that carry out specific business functions.
BAPIs are implemented as RFC-enabled function modules and are created in the Function Builder of the ABAP Workbench.
The most critical difference btwn BAPI and FM is that BAPI can be wrapped in Business objects whereas RFC cant.
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Check these Links out
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm
Refer following SDN threads:
Diff. Between BAPI and RFC
Re: BAPI and RFC
difference between RFC and BAPI
Re: Difference Between BAPI and RFC?
Reward all the helpful answers.

BDC and RFC

dear all, may I know what is the different between BDC and RFC?

Hi,

BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sap-img.com/abap/learning-bdc-
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html

RFC
Remote Function Call:
RFCs are requests that an SAP component sends to invoke functions on remote systems, or calls that remote systems initiate to invoke functions on an SAP component.A process that can accept RFCs from SAP components. This allows SAP components to access functions in external systems. In SAP BC terminology, the process is called a Listener. Listeners are one or more threads on SAP Business Connector that wait for incoming requests from SAP components. Listeners are named and register with an SAP gateway to indicate that they are ready to accept requests. Listeners can accept RFC or tRFC requests.
Transactional RFC (tRFC) and Queued RFC (qRFC). tRFC is used mainly to transfer ALE Intermediate Documents (IDocs).
Transactional RFC:
If an error occurs during a synchronous remote function call, the system cannot tell at what point the error occurred (most crucially, whether the function module was actually processed in R/3 before the operation failed). Restarting a failed call is therefore a dangerous thing to do, since you risk duplicating a completed function call.
To alleviate this problem, you can use transactional RFC, which guarantees that each function call you issue will only be executed once, even if you submit it repeatedly to the R/3 System. The system implements this safeguard by assigning a unique transaction ID (TID) to each transaction that you submit. When you attempt to process the transaction, the system checks whether that TID has already been processed. If it has, the transaction is ignored.
Queued RFC:
When you use transactional RFC, you cannot guarantee the order in which the function calls will be processed in the system (it is quite possible that one call might overtake another). For cases where you need to specify a particular processing order, you can use queued RFC, which is an extension of transactional RFC. In qRFC, you place each function call in a logical queue. A function call cannot be executed until all of its predecessors in the queue have been processed. Queued RFC calls are processed asynchronously.
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
Have a look at this link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE2/BCFESDE2.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Please go through the following link. You will get good info on RFC & its types.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f078394a-4469-2910-c4bf-853c75674694
Regards,
Priyanka.

Logical system and rfc destination

hello all,
what is the difference between logical system and RFC destination?
thanks for ur help in advance.
regards,
vikas

Hi,
In any ALE scenario u need one sender and one receiver system.
Logical systems are just logical representation of these systems but in case of RFC destination u specify technical parameters for those systems like IP address and username and password to connect to that system.
Thus when u create port i.e.we21 u specify actual RFC destination for the system to which u want to connect and when u create partner profile for that logical system u specify this port so when u want to send data to this logical system i.e receiver system port will be used which in turn has RFC destination which will be used to connect to that system.
In simple terms logical systems are logical representation of any system and RFC destinations are physical/techinical systems.
Regards

Logical system and rfc destination related Query?

Hi Dudes
Do we need to define logical system and RFC destination if they are in different clients in same server
Regards
Raj Kumar

Hi
Both are client independent setting, so even if you define in one client, it would be available in other clients also.
Regards,
Sanjeev

Logical systems for modeldata and RFC metadata

Hi All,
I want to know how I can display the my own created logical system names under the drop-down menu when i have to select the logical system names for modeldata and rfc metadata. I don't want to them to be written instead i want them to be one of the options in the drop down menu, as we have them in the FLIGHT_LIST_INIT example found in the sample applications and examples.
Thanks in advance
Srikant

Hi,
While creating SLD for your R/3 systems give the desired name of wht u want instead of logical name.
For configuring the same refer the link below :-
http://help.sap.com/saphelp_erp2004/helpdata/en/29/e0b75c2b7d40c5bfbda82e905b701c/frameset.htm
Regards,
guru

What is the diffrence between BAPI and RFC and business object

Hi Experts,
Can anybody tel me what is the diffrence between RFC and BAPI , and also what is ther relation with business object?
Thanx in advance.
Nilesh Hiwale

Hi,
BAPI's are associated with Business Objects and also they are RFC enabled.
But RFC's are the FM's which can be called from external systems, those FM's can be used in many places based on the applications..
Check these Links
whats the difference between BAPI and RFC??
Diff. Between BAPI and RFC
Regards
Kiran

Using Powershell Script Run simple query in MS Access 2007 and export the results of query to Excel

Hi Experts,
I have a Access 2007 DB file and 2 Big tables inside that (bigger than the size that can be easily handled by MS Excel 2007).
My requirement is automate using powershell scripts the below things.
1. Create a SQL query in Access DB and save that in access DB
2. Run the saved query and export the result in excel sheet where I can create the charts and Pivots. Thanks in advance
Prajesh

Do you have to use the Access query, couldn't you just recreate the query in Powershell? Here's a link with good info that references an existing script for querying an Access database:
http://blogs.technet.com/b/heyscriptingguy/archive/2009/08/13/hey-scripting-guy-can-i-query-a-microsoft-access-database-with-a-windows-powershell-script.aspx
Once you have your dataset you can pipe it to
Export-Csv -NoType c:\pathtofile\output.csv

Can't Find ODBC drivers to link MS Access 2013 and MySQL

Can't Find ODBC drivers to link MS Access 2013 and MySQL.
Is one available?
Thanks,
Larry

Could to associate the problem at Office 2013?
I just installed the ODBC Driver; The data source machine was available; When selected I had received the message. When it was selected I had received the message:
"ODBC -- falha na chamada.
[Microsoft][ODBC Driver Manager] O DSN especificado contém uma incompatibilidade de arquiteturas entre o Driver e o Aplicativo (#0)"
In english, could to say: "ODBC -- fail on call.
... The specified DSN contains a architectural incompatibility between Driver and App (#0)"
I don't know yet the reason for this. Anyone knows?

Oracle Streams b/w MS-Access 2007 and Oracle 10g.

Can we set up Oracle Streams between MS-Access 2007 and Oracle 10g? Ms-Access as source and Oracle 10g as destination database. If so, can any one please give me little heads up with supported doc's or any source of info.

Help Help....!!!

MS Access VB and RFC

Similar Messages

Maybe you are looking for