.ms  audio and .avi video

...i am so ****** off with all the things that someone has to do in order to play the .ms audio in quicktime.
I mean i have quicktime7.0.4 which calles itself pro version and cannot open a single file that PC users open it so simply.
Why again we have to use vlc??? I don't get it.
So many people have this problem .
I just want o watch a film. do not have the time or will to download software, codecs, copy tracks e.t.c....!

http://www.apple.com/quicktime/feedback/
http://discussions.apple.com/thread.jspa?messageID=1684263&#1684263
http://discussions.apple.com/thread.jspa?threadID=357008&tstart=15

Similar Messages

  • I am using MTS files.  They load in PE fine. The problem is when I try to play them, I just get audio and no video.  I have installed the latest updates.  Is there a CODEX that I need.

    I have windows 8.1.  I have downloaded the mts files from my video camera onto my hard drive.  I have loaded a subset of these mts files into premier elements and they show up fine.  I can bring them to the time line without a problem.  The issue is that when I click on them, I only get the audio and no video.  Normally when you click a thumbnail, the picture shows in the large screen.  That screen remains blank.

    John - thanks for your response
    1. Graphics Adapter:  Nvidia GeForce GTX 650
    2. My driver before you response was 3/4/14   9.18.13.3523.  I went to Nvidia and downloaded and installed latest driver 7/2/14  9.18.13.4052
    3. Rebooted and checked APE and no change in the problem. Still doesn't show video when I double click an thumbnail or if I single click it does not show a video image in the large screen.
    4. Some things I have done to try to resolve the problem.
         a. Searched this forum for a similar problem.  I didn't see one.
         b. Did a web search to see if I could find a solution outside this forum
         c Went into "edit" and tried some changes in project preferences and setting to see if that would make a difference
         d. Tried to contact Adobe support to speak to a person but that seemed difficult and could never figure out how to do it.
    5. I have always loaded AVI clips into this program and this is the first time I have tried MTS files. When I opened the new project, the program notified that I had to change something??? to load an MTS file and asked me if I wanted the program to do this for me.  I said yes and here I am.   I seem so close to making it work.   Thanks

  • Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

    The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
    The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
    There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
    BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted.  The only problem is with Lollipop.
    PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
    The audio file formats which fail to stream are:  mp3 and wav
    The video file formats which fail to stream are:  mp4, avi and 3gp
    JPEG Images appear to work fine, but I haven't tried other formats.
    I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
    Any ideas?

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • Downloaded a movie (mpeg-4) from youtube and I only have audio and no video.  it plays on another pc but not this one.  please help.

    Hi,
    I downloaded the latest free version of quicktime.  I am trying to play a movie (mpeg-4) that was downloaded from youtube.  It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.  Can anyone offer some suggestions please?  I need to play it on thislaptop computer as I require it for a school presentation.  Thank you.

    It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • Changed TV out to off but ipod still only plays audio and no video

    Just recently my ipod decided not to play video. All the videos in the video folders are gone and now appear in the music folder. Even the video podcasts no longer appear in the video podcast folder. I have changed the TV to out to off and still it continues to do the same thing. I am not sure what happened, I don't believe I changed any settings or anything. I would hate to reset the ipod and lose everything. Need help, thanks.
    Compaq Presario 1500   Windows XP   2 ghz 256 mb ram laptop

    It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

  • .mp4 and .avi video thumbnails in finder view

    Hi, Some of my .mp4 and .avi video files have a thumbnail in finder view and some don't... Does anyone know how I can solve this?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    the_wine_snob wrote:
    Maybe, but maybe not. I use DigitalMedia Converter to convert to DV-AVI Type II's (I'm only doing SD), and it has a Split function. However, I have never used that, so do not know how well it might work for your needs, if at all. I just do not know. I believe that Deskshare has a user forum, and that might be a good place to try, after you've looked down their FAQ's.
    I hope that others will have a definitive answer for you, with iron-clad suggestions.
    Good luck,
    Hunt
    i don't know.

  • Hidding the floating toolbar that apears when sharing audio and/or video

    Hello everyone!
    I'd like to know if is it possible to remove(or hide) the floating toolbar that appears when sharing audio and/or video on firefox.
    I am attaching an image of what I want to hide.
    Thanks in advance,
    Ibrahim

    Sorry...
    The attachment didn't work the first time...

  • Audio (and some video) dropping out export

    I've created an project with short video/audio clips sampled to produce "music". It plays OK in FCPX, but when I export it (H.264, 720p, Apple Devices, 44.1) as an MP4, some of the audio (and some video) drops out. That is, it does not show up in the exported (aka "Shared") movie file.
    There are about 7-8 things (tracks) going on at once, maximum.
    Any ideas what to do to fix this?
    Thanks!

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • Streaming audio and/or video crashes your router BEFW11s4 firmware problem

    Ok!!! Apparently some of us have had the problem where trying to stream audio and/or video can cause the Linsys BEFW11S4 to crash, where only a power down and re-up will retore communication. Changing the MTU size has been suggested ad-nausium. I hope this works for you all, because it worked for me.
    Apparently the latest firmware is the problem. I just installed an older firmware version and problem solved (1.50.14).
    ftp://ftp.linksys.com/pub/network/befw11s4_v4_v1.50.14_code.bin
    So, looks like maybe Linksys could hopefully issue another firmware update that fixes this (we hate having to use old firmware... trading off one bug fix for other multiple bugs that may rear their ugly head later on).
    list of bugfix history found here:
    http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=text%2Fplain&blobheadervalue2=inline%3B+filename%3Dbefw11s4_v4_v1.52.02_ver.txt&blobkey=id&blobtable=MungoBlobs&blobwhere=1130824460891&ssbinary=true

    Hi all -
    This looks like this will fix the issue I have with my router. I'm willing to try it, anyway.
    My question is pretty basic: What do I do after I download the file?
    Thanks, Kate

  • Merging one Audio and one Video into one file.

    Hi guys,
    I have one audio and one video file, related to same issue.
    I want to merge it using Java.
    Please help me to solve this out.
    Thanking you all in advance.
    Regards,
    Lovelesh.

    check out FMJ:
    http://fmj-sf.net/

  • AVI files loaded in Premier Elements 7 only show audio and not video.

    I am a new user of Premier Elements 7 and am having problems getting the video into a new project I set up. I have 6 AVI v1.0 clips that play both audio and video in Windows 7, but when I set up a project and import them, I only get the audio side and not the video side. I can drag the audio to the timeline and can play the audio just fine. But it is missing the video. I must be doing something wrong, but am new enough that I don't know where to turn.
    I have been reading the forums and taking tutorials, so I think I know the steps to import a video into PRE7. I've tried many things, but still no video. I downloaded GSpot and found that my files have video H264 (H.264/MPEG-4 AVC) and audio oxooo2 (ADPCM). The codecs seem to be installed on my Windows 7 computer.
    Can someone point me in the right direction on what to do next. I'm a computer professional with 50 years of experience, so am no dummy, but am new to PRE7. Thanks in advance.

    I found a mini-CD that came with the product. When I loaded it on my computer, one of the options was to install a device driver. I did this and now I can see the video in PRE7. So, I think this solves my problem.
    I applaud the mfgr. of the Insignia. This is the way that it should be with ALL cameras, that do not use a miniDV tape, or precise CODEC, that is mainstream. All too often, the mfgrs. tweak an existing CODEC, and just leave the customer hanging, trying to find a way to edit the footage. A couple of major mfgrs. come immediately to my mind.
    Others, who use CODEC's, like Xvid, that is so heavily compressed, that even converting it to an editable format/CODEC results in such horrible footage, that no one would ever be satisfied with the finished product.
    <Soapbox Mode Off>
    Glad that you are now up and editing. For my education, what does G-Spot say about the CODEC in the Insignia footage? At least next time that I encounter it, I can say - "look in the box, and install the driver to get the CODEC."
    Thanks for reporting,
    Hunt

  • Cannot import .avi file, I only get audio and no video!

    Im trying to import from an SDCard some video taken from a Samsung camcorder to import into iMovie09, when I play it on Quicktime I only get audio. I have tried MPEG Streamclip to convert the .avi file to another format but have not been successful. I used MediaInfo and these are the results:
    Can anyone help me find a solution please?
    General / Container Stream # 1
    Total Video Streams for this File -> 1
    Total Audio Streams for this File -> 1
    Video Codecs Used -> Samsung MPEG-4
    Audio Codecs Used -> U-Law
    File Format -> AVI
    Play Time -> 10mn 3s
    Total File Size -> 161 MiB
    Total Stream BitRate -> 2 236 Kbps
    Video Stream # 1
    Codec (Human Name) -> MPEG-4 Visual
    Codec (FourCC) -> SEDG
    Frame Width -> 720 pixels
    Frame Height -> 480 pixels
    Frame Rate -> 29.970 fps
    Total Frames -> 18085
    Display Aspect Ratio -> 1.500
    Video Standard -> NTSC
    Scan Type -> Progressive
    Codec Settings (Summary) -> BVOP
    Codec Settings (Packet BitStream) -> No
    QF (like Gordian Knot) -> 0.178
    Codec Settings (BVOP) -> Yes
    Codec Settings (QPel) -> No
    Codec Settings (GMC) -> No warppoints
    Codec Settings (Matrix) -> Default (H.263)
    Video Stream Length -> 10mn 3s 437ms
    Video Stream BitRate -> 1 845 Kbps
    Bit Depth -> 24 bits
    Video Stream Size -> 133 MiB (83%)
    Audio Stream # 1
    Codec -> ADPCM
    Codec (FourCC) -> 7
    Audio Stream Length -> 10mn 3s 400ms
    Audio Stream BitRate -> 384 Kbps
    Audio Stream BitRate Mode -> CBR
    Number of Audio Channels -> 1
    Sampling Rate -> 48.0 KHz
    Bit Depth -> 8 bits
    Audio Stream Size -> 27.6 MiB (17%)
    Thanks in advance!

    Update to first post.
    The Flip Video camcorder records or "captures" video in MPEG-4 advanced simple profile format, saved as an AVI file.
    MPEG-4 advanced simple profile format = usually DivX
    1.) With Mpeg streamclip you should be able to convert your AVI(Divx) files to a DV format for iMovie. To open DivX files, you have to install one of the free Divx Pro codecs on your system.
    MPEG Streamclip 1.8
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    DivX Pro Codec 6.6 (6-month trial)
    http://www.divx.com/divx/mac/
    2.) Visual Hub $24 should be able to convert WMV and AVI (compressed with the DivX Codec)to a DV format for iMovie.
    http://www.techspansion.com/visualhub/
    3.) With Flip4Mac WMV Player Pro $29 you can convert your WMV files for iMovie.
    http://www.flip4mac.com/wmv.htm
    4.) With Perian 0.5 and Quicktime Pro $30 you should be able to convert your AVI/DivX files to a DV format for iMovie.
    http://perian.org/
    I hope one of these solutions work for you.

  • Adding audio and/or video without altering time line...

    I currently have a completed i-movie project of which I wanted to add some "stuff" at the begining of the presentation and actually at one point in the middle. I want to "insert" this audio and a few slides without altering the rest of the project. Am I am to anchor points so that what ever I do around those points does not affect the timing of what is already there?
    Thanks in advance all.
    JCole

    Hi
    First your server does not require javascript only your browser, (standard in all modern browsers).
    You also do not necessarily require the flash program, (your browser will require a plug-in for the audio video to play).
    You will require some form of video/media encoding software to convert your files to the required format though, (do a search using your preferred search engine for video encoder), then use dreamweavers insert file option to insert your audio/video file into your html
    PZ
    www.pziecina.com

Maybe you are looking for