MS-Based not working for 8330

Hi,
for my GPS application PDE mode is working fine for 8330 and 9550 both with Verizon network but Ms-Mode is not workign for 8330.
Any sugestion?
Thanks
Manish

Have you thought about trying a diffrent USB port?
If someone helped you give them kudos. Research all info!

Similar Messages

  • Auto_lexer (stemming) not working for other languages(other than english)

    Hi All,
    We are planning to use AUTO_LEXER instead of MULTI_LEXER and observed that stemming is not working for German where as it is working for English when I use AUTO_LEXER. I even used query templates but of no use.
    But when i use MULTI_LEXER, creating sub lexers for German and Enlgish, Stemming is working for German also after changing the session language and setting stemmer of wod list to German (Which is expected).
    Following is the code for AUTO_LEXER creation:
    CREATE TABLE test_auto_lexer(pkey NUMBER(5,0),
    lang_index VARCHAR2(3),
    content_text CLOB,
    CONSTRAINT test_auto_lexer_pk primary key (pkey))
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (1,'eng','I drive a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (2,'eng','I drove a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (3,'eng','I have driven a bike')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (4,'eng','Just check for other things')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (5,'eng','always drive a car')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (6,'eng','it is nothing')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (7,'ger','Ich fahre ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (8,'ger','Ich fuhr ein Fahrrad')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (9,'ger','Ich habe ein Fahrrad gefahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (10,'ger','Aktivieren Sie einfach für andere Dinge')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (11,'ger','immer Auto fahren')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (12,'ger','es ist nichts')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (13,'ger','sprechen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (14,'ger','sprach')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (15,'ger','gesprochen')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (16,'ger','tale')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (17,'ger','Indlæg')
    INSERT INTO test_auto_lexer(pkey,lang_index,content_text)
    VALUES (18,'ger','tales')
    BEGIN
    ctx_ddl.create_preference('auto_lexer1', 'auto_lexer');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','index_stems','yes');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','language','danish english german');
    END;
    BEGIN
    ctx_ddl.set_attribute('auto_lexer1','alternate_spelling','german');
    END;
    CREATE INDEX test_auto_lexer_ix1
    ON test_auto_lexer(content_text)
    INDEXTYPE IS ctxsys.context
    PARAMETERS ('datastore ctxsys.direct_datastore filter ctxsys.null_filter lexer auto_lexer1')
    select to_char(content_Text) from test_auto_lexer where contains(content_text,
    '<query>
    <textquery lang="ger" grammar="context">
    $fahren
    </textquery>
    <score datatype="integer"/>
    </query>') > 0
    this doesnt work even after changing the session language. My default Sesson language is AMERICAN.
    Could any one help me with this, in case I am missing something here. I would be really thankful.
    Edited by: Nagendra Prasad on Jan 23, 2010 12:05 AM

    In the future, please begin a new thread for a new question and provide a link to a related question.
    According to the online documentation, Oracle only supports stemming for English, Dutch, French, German, Italian, Spanish, and Japanese. Oracle does not support Russian stemming, although you may have gotten some accidental results, due to identifying it as a different language and applying stemming rules for that language. The following manual sections show the languages available for the index_stems attribute of the basic_lexer and stemmer attribute of the basic_wordlist:
    Basic_lexer attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#CIHHBAAD
    Basic_wordlist attributes:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#g1019326
    Also, please see the following note:
    Features not available in 11.2.0.3:
    http://docs.oracle.com/cd/E11882_01/readmes.112/e22488/toc.htm#BABDGGDB
    "Certain Oracle Text functionality based on third-party technologies, including AUTO_LEXER and CTX_ENTITY, have been disabled in this release (reference Bug 12618046). For BASIC_LEXER, the usage of the INDEX_STEMS attribute values that depend on third-party technologies, is also affected. If this impacts an existing application, contact Oracle Support Services for guidance."
    Also, the auto_lexer has been replaced by the world_lexer, which only has one attribute:
    http://docs.oracle.com/cd/E11882_01/text.112/e24436/cdatadic.htm#BHCJEGFJ
    I don't work for Oracle, so I don't know why they do things the way they do.
    So, you need to stick with the basic_wordlist for stemming, not the lexers. However, you may get better performance by combining the multi_lexer with the basic_wordlist, as the multi_lexer eliminates time spent on automatic language detection. But, you need to remember not to use the index_stems with your lexer, since it will conflict with the wordlist. I am not experiencing any time problems as you have. Please see the demo below. I have provided the whole script below that, so that you can reproduce it on your system. If you still have problems, then it may be due to differences in versions.
    -- demo:
    SCOTT@orcl_11gR2> select * from v$version
      2  /
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    5 rows selected.
    SCOTT@orcl_11gR2> select value from v$nls_parameters
      2  where  parameter = 'NLS_CHARACTERSET'
      3  /
    VALUE
    AL32UTF8
    1 row selected.
    SCOTT@orcl_11gR2> DROP TABLE news
      2  /
    Table dropped.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> CREATE TABLE news
      2    (pkey            NUMBER,
      3       lang            VARCHAR2 (2),
      4       short_content  CLOB)
      5  /
    Table created.
    SCOTT@orcl_11gR2> INSERT ALL
      2  INTO news (pkey, lang, short_content)
      3    VALUES  (1, 'en', 'I drive a bike.')
      4  INTO news (pkey, lang, short_content)
      5    VALUES  (2, 'en', 'I drove a bike.')
      6  INTO news (pkey, lang, short_content)
      7    VALUES  (3, 'en', 'I have driven a bike.')
      8  INTO news (pkey, lang, short_content)
      9    VALUES  (4, 'en', 'I always drive a car')
    10  INTO news (pkey, lang, short_content)
    11    VALUES  (5, 'en', 'This is nothing')
    12  INTO news (pkey, lang, short_content)
    13    VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    14  INTO news (pkey, lang, short_content)
    15    VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    16  INTO news (pkey, lang, short_content)
    17    VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    18  INTO news (pkey, lang, short_content)
    19    VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    20  INTO news (pkey, lang, short_content)
    21    VALUES  (10, 'de', 'Es ist nichts.')
    22  SELECT * FROM DUAL
    23  /
    10 rows created.
    SCOTT@orcl_11gR2> BEGIN
      2    -- word list:
      3    ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      4    ctx_ddl.set_attribute      ('my_wordlist',   'stemmer',           'auto');
      5    -- english lexer:
      6    ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      7    -- german lexer:
      8    ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      9    ctx_ddl.set_attribute      ('german_lexer',  'composite',       'german');
    10    ctx_ddl.set_attribute      ('german_lexer',  'alternate_spelling', 'german');
    11    ctx_ddl.set_attribute      ('german_lexer',  'mixed_case',       'no');
    12    ctx_ddl.set_attribute      ('german_lexer',  'base_letter',       'yes');
    13    -- multi_lexer:
    14    ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
    15    ctx_ddl.add_sub_lexer      ('global_lexer',  'default',            'english_lexer');
    16    ctx_ddl.add_sub_lexer      ('global_lexer',  'german',            'german_lexer');
    17  END;
    18  /
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> create index search_news
      2  on news (short_content)
      3  indextype is ctxsys.context
      4  parameters
      5    ('lexer            global_lexer
      6        language column  lang
      7        wordlist       my_wordlist')
      8  /
    Index created.
    SCOTT@orcl_11gR2> EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    PL/SQL procedure successfully completed.
    SCOTT@orcl_11gR2> COLUMN short_content FORMAT A30
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
      2  /
    Session altered.
    SCOTT@orcl_11gR2> set timing on
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drive') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$drove') > 0
      3  /
          PKEY LA SHORT_CONTENT
             1 en I drive a bike.
             2 en I drove a bike.
             3 en I have driven a bike.
             4 en I always drive a car
    4 rows selected.
    Elapsed: 00:00:00.05
    SCOTT@orcl_11gR2> ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
      2  /
    Session altered.
    Elapsed: 00:00:00.01
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fahr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.07
    SCOTT@orcl_11gR2> select * from news
      2  where  contains (short_content, '$fuhr') > 0
      3  /
          PKEY LA SHORT_CONTENT
             6 de Ich fahre ein Fahrrad.
             7 de Ich fuhr ein Fahrrad.
             8 de Ich habe ein Fahrrad gefahren.
             9 de Ich habe immer ein Auto fahren
    4 rows selected.
    Elapsed: 00:00:00.16-- script for you to reproduce the demo on your system:
    select * from v$version
    select value from v$nls_parameters
    where  parameter = 'NLS_CHARACTERSET'
    DROP TABLE news
    EXEC CTX_DDL.DROP_PREFERENCE ('my_wordlist')
    EXEC CTX_DDL.DROP_PREFERENCE ('global_lexer')
    EXEC CTX_DDL.DROP_PREFERENCE ('english_LEXER')
    EXEC CTX_DDL.DROP_PREFERENCE ('german_LEXER')
    CREATE TABLE news
      (pkey           NUMBER,
       lang           VARCHAR2 (2),
       short_content  CLOB)
    INSERT ALL
    INTO news (pkey, lang, short_content)
      VALUES  (1, 'en', 'I drive a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (2, 'en', 'I drove a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (3, 'en', 'I have driven a bike.')
    INTO news (pkey, lang, short_content)
      VALUES  (4, 'en', 'I always drive a car')
    INTO news (pkey, lang, short_content)
      VALUES  (5, 'en', 'This is nothing')
    INTO news (pkey, lang, short_content)
      VALUES  (6, 'de', 'Ich fahre ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (7, 'de', 'Ich fuhr ein Fahrrad.')
    INTO news (pkey, lang, short_content)
      VALUES  (8, 'de', 'Ich habe ein Fahrrad gefahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (9, 'de', 'Ich habe immer ein Auto fahren.')
    INTO news (pkey, lang, short_content)
      VALUES  (10, 'de', 'Es ist nichts.')
    SELECT * FROM DUAL
    BEGIN
      -- word list:
      ctx_ddl.create_preference ('my_wordlist',   'basic_wordlist');
      ctx_ddl.set_attribute     ('my_wordlist',   'stemmer',            'auto');
      -- english lexer:
      ctx_ddl.create_preference ('english_lexer', 'basic_lexer');
      -- german lexer:
      ctx_ddl.create_preference ('german_lexer',  'basic_lexer');
      ctx_ddl.set_attribute     ('german_lexer',  'composite',          'german');
      ctx_ddl.set_attribute     ('german_lexer',  'alternate_spelling', 'german');
      ctx_ddl.set_attribute     ('german_lexer',  'mixed_case',          'no');
      ctx_ddl.set_attribute     ('german_lexer',  'base_letter',         'yes');
      -- multi_lexer:
      ctx_ddl.create_preference ('global_lexer',  'multi_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'default',             'english_lexer');
      ctx_ddl.add_sub_lexer     ('global_lexer',  'german',              'german_lexer');
    END;
    create index search_news
    on news (short_content)
    indextype is ctxsys.context
    parameters
      ('lexer            global_lexer
        language column  lang
        wordlist         my_wordlist')
    EXEC DBMS_STATS.GATHER_TABLE_STATS (USER, 'NEWS')
    COLUMN short_content FORMAT A30
    ALTER SESSION SET NLS_LANGUAGE = 'AMERICAN'
    set timing on
    select * from news
    where  contains (short_content, '$drive') > 0
    select * from news
    where  contains (short_content, '$drove') > 0
    ALTER SESSION SET NLS_LANGUAGE = 'GERMAN'
    select * from news
    where  contains (short_content, '$fahr') > 0
    select * from news
    where  contains (short_content, '$fuhr') > 0
    /

  • Fingerprint utility is not working for normal users - Tecra M11

    Hi All,
    I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
    It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
    If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
    Thanks.

    People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
    Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
    According my personal experience, you can try these three ways to re-access to your PC:
    Method 1: Login with the default administrator account
    * Step 1: Start Windows PC
    * Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
    * Step 3: Type Administrator as Username and leave the password field blank
    * Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
    *Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
    Method 2: Use the previous password reset disk
    This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
    Method 3: Using Windows Password Unlocker
    Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
    There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
    Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
    Option 1: Recover Windows password by burning a bootable CD/DVD
    Option 2: Recover Windows password by burning a USB flash drive
    The whole Windows password recovery process can be divided to 3 big steps:
    * >> Step 1: Burn a USB flash drive to remove lost Windows password
    * >> Step 2: Set your target computer to boot from USB
    * >> Step 3: Recover forgotten Windows password with the burned USB flash drive
    In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

  • I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

    A reply to similar question (Q & As , in product page Apple Store) says:
    "...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it."  Answered by Enrique T from Lima Oct  25 2013.
    If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
    You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
    Hopefully this helps.
    Good luck & happy computing!

  • Search Bar is not working for me in windows 7 32 bit OS

    Search Bar is not working for me in windows 7 32 bit OS'''bold text'''

    Hi Sameer,
    There's no version of Windows Vista that is supported, regardless of service packs.  You can always upgrade to Windows 7, though.
    Your other option is to use Brackets, the open source editor that Edge Code is based on.  It still supports Vista for now.  The downside is that Brackets lacks some features of Edge Code: Kuler integration, Edge Inspect integration, and Edge Web Fonts code hints -- although all of those except Kuler are offered as optional Brackets extensions too (you just have to install them).
    Hope that helps,
    - Peter

  • BPM Worklist: Searching in custom views does not work for protected flexfields !

    Hello,
    Have mapped few protected attributes in my .task file. Also created the corresponding labels on target SOA server. I am able to create custom views using these protected flex fields.
    But what I have observed is keyword based search is not working for custom views using protected fiexfields.. however it works fine with public fiexfields.
    Any pointers on this? Am I missing something in the configuration?
    Thanks..

    Can anyone help me?

  • Function Module not working for old Role

    Dears
    Function Module not working for old Role
    Function Module: /VIRSA/BAPI_AE_USERS_FOR_ROLES
    Before EHP4 upgrade this functional module working fine, but after updated users are not visible.
    We have chekced if the users are assigned directly users are visible but indirect (Position Based) assignment users are not apprearing.
    Pl check the fucntion module with given roles below and identify the root cause,
    EP_TRVL_ALL_CAB     - Old Role
    EP_TRN_TRVL_DRGC_V2 - New Role
    Regards
    Krishna Mohan CH
    9704500717

    Krishna,
    I do not think this BAPI is meant to be called by anyone but the application using it, and its functionality may therefore change without notice.
    What are you trying to achieve? Maybe there's a better way to do that...
    Frank.

  • Drill down is not working for Pivot tables,but working for chart

    I have two reports and trying to navigate betwen summary report to detail report. But details report is displaying all the records .The filter condition is not working and displaying all the filters .I have Case statement in my filter.But the summary report column where the filter condition is applied is aggregated in the RPD level. Does this might be the reason ?. Is it passing different type of data type to details report ?. The filter condition is not working for Pivot table .But Chart is working fine and displaying the only selected records based on the filter condition.
    Please help me with the below issue.

    Hi sil174sss,
    Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
    Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
    control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
    I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
    On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
    If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
    can reference to this similar thread:
    lost collapsing columns when export to excel
    Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
    Article below about how to add  Expand/Collapse Action to an Item for your reference:
    http://msdn.microsoft.com/en-us/library/dd220405.aspx
    If your problem still exists, please feel free to ask
    Regards
    Vicky Liu

  • Lion Server DNS service not working for locally created zones. Caching working fine.

    OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
    Surely someone actually tested that DNS still worked on Lion?

    I upgraded from Snow Leopard Server to Lion Server on day 01.  I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
    I finally took a few minutes to figure out what was wrong.  After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
    The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain).  I never messed with it because it worked, but generally I would have put all of them in the same zone.
    My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv.  I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel.  This was fine in Snow Leopard.  This was failing the zone load in the updated bind for Lion Server, though.  The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
    My fix:
    1. In Server Admin, add the server to the zone "mydomain.priv".  I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
    2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
    3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server.  In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'.  Your in-addr.arpa zone name will change based on whatever your server IP address was.  My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
    4. Once the specialized zones for just the server were removed, I started the DNS up again.  Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones.  And, now, it is resolving my local machines for the mydomain.priv zone.
    YMMV.  I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
    Hope that helps.  That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

  • Multiple occurence not working for extended idocs

    hai friends
    iam doing file to idoc senario in that multiple occurence is not working for Z segments.
    it is extented idoc .
    in taht multilpe segments are not creating only one segment is creating
    what is the problem
    pls help me
    with regards
    srikanth vipparla

    Hi Srikanth,
    You should map the node of the target side(the one which you want to occur multple times) to the node of the source side based upon which the target side node has to occur multiple times. For example lets say our source and target side structures are like this:
    <Source>
                  <Element1>
                  <Element2>
                  <Element3>
    </Source>
    <Target>
                  <Element1>
                  <Element2>
                  <Element3>
    </Target>
    Now if you want Target to occur n times if  Source node occurs n times, you should map Target node to the Source node. Even in case you want that Element1 of target side should occur as many times as many times you have Element1 of Source side, you should do the same.
    Thanks and Regards,
    Sanjeev.
    PS: Reward points if helpful.

  • EP6.0 SP2 to EP 7 upgrade - UWL not working for PCR approvals

    Hi there,
    Following the EP 7.0 migration, the UWL is not working for PCR approvals.  Following the registration of the WebFlowConnector, using the default configuration, clicking a PCR approval item in the Inbox brings up the following error:
    HTTP handler for starting an external service cannot be read
    In order to rectify this, the following configuration file was uploaded.
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [  ]>
    <UWLConfiguration version="1.0">
      <ItemTypes>
        <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
          <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchIView" handler="IViewLauncher">
              <Properties>
                <Property name="iview" value="com.sap.pct.hcm.isrdispatcher.default"/>
                <Property name="openInNewWindow" value="yes"/>
              </Properties>
              <Descriptions default="launchIView"/>
            </Action>
          </Actions>
        </ItemType>
      </ItemTypes>
    </UWLConfiguration>
    Following the new configuration, clicking the item HAS NO EFFECT i.e. no window, no action, nothing.  The only available option available is an option to Forward the item.
    I have tried the following ItemType names with the same result:
    1. uwl.task.webflow.TS50000075.D46CLNT080
    2. uwl.task.webflow.D46CLNT080_TS50000075
    Has anyone encountered this before?
    Cheers
    John

    FYI.  The problem seems to be occuring as a result of the running EP7.0 with a SAP R/3 46C backend.
    I did manage to get this working in the end.  I had to create an iView say "myISRDispatcher" based on the portal component com.sap.pct.hcm.isrdispatcher.default.  Update the UWL configuration to refer tot his PCD location as shown below:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd' [  ]>
    <UWLConfiguration version="1.0">
      <ItemTypes>
        <ItemType name="uwl.task.webflow.TS50000075" connector="WebFlowConnector" defaultView="defaultView" defaultAction="launchIView" executionMode="default">
          <ItemTypeCriteria systemId="D46CLNT080" externalType="TS50000075" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchIView" handler="IViewLauncher">
              <Properties>
                <Property name="iview" value="pcd:portal_content/myISRDispatcher"/>
                <Property name="openInNewWindow" value="yes"/>
              </Properties>
              <Descriptions default="launchIView"/>
            </Action>
          </Actions>
        </ItemType>
      </ItemTypes>
    </UWLConfiguration>

  • Defaulting Rules Not Working for Repair Orders in OM?

    Hi,
    Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
    But in our project we are using  Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
    Please help me to solve this issue ASAP.
    Thanks,
    Kishor

    Hi,
    You have like this:
    1. Price list
    2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    You have to make
    1. XXOE_DEFAULT_PVT.custom_code
    2. Price list
    3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    Did you made own custom code to pick currency?
    Regards,
    Luko

  • I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

    I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

    Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

  • IPhone 6 External Mic not working for Siri/Dictation

    I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation.  When I plug in the earbuds, they work for everything (including Siri/Dictation).
    Was chatting to Apple support who had me reset all settings.  I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works).  When I turned Siri back on, it does not work.
    I have two questions for the community to see if you can help:
    1- I have been assuming this must be a software problem since the mic does work for non-Siri access.  But is that true?  Is there a hardware component that Siri depends on which could be faulty here?
    2- If it is software, what action should I try to address it?  I have done a reset all settings already and that did not help.
    Doug

    Hi, everyone.  I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again.  I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test.  If you can hear your voice recording clearly, then the mic works.  I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work.  So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls.  Will need to go back to Apple Genius this weekend for sure.  Will give update after the weekend.

  • CALLER ID not working for International incoming calls

    Hi,
    I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
    Any clue?

    yashshankar wrote:
    Hi
    I recently  purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
    Regards
    Yash
    You didn't mention what country your Online Number is in.  Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages.  If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way.  Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
    To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page.  You'll see a screen that would include your current Caller ID settings, and a link to change that.  If your Online Number is from one of those countries I referenced above, just select it and you're done. 
    Hope that helps!
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

Maybe you are looking for