MS CAPI with Java

Hi All
I just want to know if we can use MS CAPI with java
I dont think MS will give .class files which i can use with java
So how else ,I went through some earlier Posts but it dint help
Please advice as to how one can implement MS ACPI using java or is
it a Wild Goose Chase .I am totally clueless
Also,
can i have some name of Crypto providers (for Java)
i have already implemented bouncy castle
Thanks
Aviz

The algorithms are the same whether you use MS or BouncyCastle, etc.

Similar Messages

Configure CRS2008 to using AD and Kerberos with Java application servers.

Hi All,
I have configure CRS2008 to using AD and Kerberos with Java application servers. Domain Controller is installed on W2K3 Server. In addition, CRS2008 is installed on another W2k3 Server.
I have create service account in domain controller: CMSACC
I have create two user account: CRuser1 and CRuser2
I have create domain group: CRSGroup
After I had run the setspn in domain controller,I got the message at below:
Registered ServicePrincipalNames for CN=CMSACC, OU=TEST, DC=BD, DC=com:
    BOBJCentralMS/BDMGTSRV.BD.com
CMC Setting:
AD Administration Name: BD\administrator
Default AD Domain: BD.com
Add AD Group(Domain\Group): secWinAD:CN=CRSGroup,OU=TEST,D=BD,DC=com
Service principal name:BOBJCentralMS/CMSACCatBD.com
I have create a WINNT folder in root directory.Moreover and save bcsLognin.conf and Krb5.ini at here.
bscLogin.conf:
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required;
krb5.ini:
[libdefaults]
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
[realms]
forwardable = true
BD.com = {
default_domain = BD.com
kdc = BDMGTSRV.BD.com
I have tested the Kerberos,using kinit CMSACCatBD.com password, and got error message at below:
Exception: krb_error 41 Message stream modified (41) Message stream modified
KrbException: Message stream modified (41)
        at sun.security.krb5.KrbKdcRep.check(KrbKdcRep.java:53)
        at sun.security.krb5.KrbAsRep.<init>(KrbAsRep.java:96)
        at sun.security.krb5.KrbAsRep.getReply(KrbAsRep.java:486)
     at sun.security.krb5.KrbAsRep.getReply(KrbAsRep.java:444)
     at sun.security.krb5.internal.tools.Kinit.sendASRequest(Kinit.java:310)
     at sun.security.krb5.internal.tools.Kinit.<init>(Kinit.java:259)
     at sun.security.krb5.internal.tools.Kinit.main(Kinit.java:106)
My problem is failed to logon CMC and infoview and got error message at below:
Account Information Not Recognized: Active Directory Authentication failed to log you on. Please contact your system administrator to make sure you are a member of a valid mapped group and try again. If you are not a member of the default domain, enter your user name as UserNameatDNS_DomainName, and then try again.
Actually, I am sucessful to logon Business View manager with CRuser1. However, I fail to logon CMC and infoview and got the above error. Have you any suggestion to solve this problem?
Ken.

if you can logon with client tools then that should be an indication that the service account running the CMS IS working! Good news.
So the problem is likely with the java portion (krb5/bsclogin or java options)
If the files are in c:\winnt\ (if not copy them there) and perform c:\program files\business objects\javasdk\bin\kinit username
then enter and password/enter again
Probably get the same message. To note in your krb5.ini all domain info must be in CAPS (the .com appears to be in lower case)
kinit works with just the krb5.ini, java SDK and AD (removing BO config and the service account from the picture). Once that works if your java options are specified properly you should be able to login to CMC/infoview.
also 1 last point. Add udp_preference_limit = 1 to the krb5 lib defaults section
libdefaults
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
udp_preference_limit = 1
Regards,
Tim

BC4J and OAS with Java Application Client

Could you show me an example about using the BC4J and OAS with Java Application client.
The JDeveloper Help is not enough to solve this kind of problem.
Configuration:
Jdeveloper 3.1
OAS 4.0.8.1
Database 7.3.4
null

if you can logon with client tools then that should be an indication that the service account running the CMS IS working! Good news.
So the problem is likely with the java portion (krb5/bsclogin or java options)
If the files are in c:\winnt\ (if not copy them there) and perform c:\program files\business objects\javasdk\bin\kinit username
then enter and password/enter again
Probably get the same message. To note in your krb5.ini all domain info must be in CAPS (the .com appears to be in lower case)
kinit works with just the krb5.ini, java SDK and AD (removing BO config and the service account from the picture). Once that works if your java options are specified properly you should be able to login to CMC/infoview.
also 1 last point. Add udp_preference_limit = 1 to the krb5 lib defaults section
libdefaults
default_realm = BD.com
dns_lookup_kdc = true
dns_lookup_realm = true
udp_preference_limit = 1
Regards,
Tim

XSLT Mapping with Java class not working in Integration Repository

Hi,
I have an XSLT mapping program with Java enhancement and I was able to successfully tested it in Stylus Studio. However, when I imported the Java class and the xslt program in Enterprise Service Builder and tested it, my program does not compile.
Here is the error message: "Transformer Configuration Exception occurred when loading XSLT mapping_temp.xsl; details: Could not compile stylesheet".
My java program is in a zip file containing SOAPHeaderHandler.java and SOAPHeaderhandler.class. My Java has a package com.nga.xslt.
Here is the declaration of my Java class in the XSLT: xmlns:javamap="java:com.nga.xslt.SOAPHeaderHandler"
It seems that it could not read the java class. Can you please advice what is wrong?

Hi ,
select XMLTOOLKIT option in Operation mapping and execute it.
I am not sure we can call java program in XSLT Program,but alternative is copy the code and use it in XSLT mapping it self,that means your XSLT program will become with JAVA extensions.
then in Operation mapping level select SAPXMLTOOL kit option and execute it. i hope it will work. if it is not working then you have deploy some JAXP files on server,because the way execution of XSLT Mpaping program got changed,like when eve you executing XSLT with extnasions( if you are not using XMLTOOL kit option) then you have to use latest version of JAXP.JDK files.
Regards,
Raj

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Problem with java installation on Linux

HI ,
I am trying to install jdk on Linux..I am new to java and Linux both. I am trying to download the file for the linux installation onto my home PC(windows XP) and then ftp it to my Linux machine. I need to do this because I have a remote login to my Linux machine( a server at school). However when I try to download file my IE jsut crashes. I can see the page for accepting the Agreement but when I click on Accept the next page just stops responding.
Could someone explain why this is happening.
thanks,
G.

The problem doesn't have to do anything with Java or Linux as far as i can see. It's more likely a problem with Windows XP and IE. Be assured that normally downloading the Linux JDK in windows is not a problem.

Problem with Java and Windows (Mainly Vista and UAC)

Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
Joey

Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job.

Problem with java and flex web service

Hi,
I have a basic web service written in java using jax ws 2.1
ri. I need to call it from Flex using the WebService class
Annotations for the java web method :
@WebMethod
public void Login(
@WebParam(name="server") String serverURL,
@WebParam(name=AUTHENTICATE_HEADER,header=true,mode=WebParam.Mode.INOUTHolder<Authenticate Header>
authHeader)
When I try and call the service from Flex , it can't find the
login method and attempts to call it fail. If I set the web service
to RPC based using @SOAPBinding , the method is found but then
there are issues with the authentication header.
What do I need to do to get flex web services communicating
succesfully with java ?
Are there are any known compatibility issues ? Or guidelines
for going about this ?
Any help would be appreciated

well Shay,
i've used JDev's tools to developer and to deploy the web service: the war and ear files are automatically generates you to the end of the process.
I have included all the files java and the compiled classes, but I do not have files jar.
But don't works: if i create only one java class with all code inside then it works fine!!
Daniele

Problem with java and yahoo games

hello everyone,
i have a mac 10.6.8 with java SE 6 1.6.0_33-603-424 and i have problems with yahoo games.... anyone can help me please, i have a mac 10.6.8 with java SE 6 1.6.0_33-603-424 and i have problems with yahoo games.... anyone can help me please

So here is what comes to pass.
Recall this started as a Lion Safari/5+ environment that SU took to version 6.
Two weeks ago I just updated Flash Player. Today I fire up Java Preferences and I am told that I need to download Java. Did so, intentionally hit the "factory reset" button and then installed the Flash Player from teh Adobe site. The most recent install suggests automatic update but I choose "ask first."
Restart Safari and we seem to be in order
Thanks

Problem with java and pogo games

i use mozilla and now with the problems with java and hackers cannot play my pogo games,what can i do? i disabled my java i tried java 6 doesnt work or is not safe,what is a safe way to play games on pogo that use java?

Oracle has released a Java 7 Update 11 to address security vulnerabilities and you should update to that version.
*https://support.mozilla.org/kb/how-to-use-java-if-its-been-blocked
See also:
*http://kb.mozillazine.org/Java#Windows_installation_issues
You can find the latest Java version on the Oracle website.
See Java Platform > Java SE 7U11 and Java 6U38 (Download JRE)
*http://www.oracle.com/technetwork/java/javase/downloads/index.html

Problem with java swing button and loop

Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
Tomi

This is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime

Problem with java, ASCII and Linux

Hi Friends,
I has a Linux RedHat 9.0 with a jre1.5.0_04 (rpm package of Sun).
I has a problem with ASCII , for example :
import java.io.*;
public class HolaMundo
public static void main (String[] args)
System.out.println("Hol� M�ndo");
this programs runs ok on my windows jdk so it prints "Hol� M�ndo", but when i run the same HolaMundo.class program on my linux redhat it prints "Hol�� M��ndo"
I think the problem is with the ASCII table that uses the linux version of jre, but i dont know how to solve this problem. I need a Spanish-European ASCII table on my application but i think it is working with a US-ASCII table.
Then i has installed a kaffe 1.0 (rpm) java machie on this linux and this solve the problem but i has another problems of compatibility with this old version of java kaffe.
Do you know whats happening?
Thanks in advance.

The problem doesn't have to do anything with Java or Linux as far as i can see. It's more likely a problem with Windows XP and IE. Be assured that normally downloading the Linux JDK in windows is not a problem.

Problem with Java Memory "Could not reserve enough space for object heap"

Hi gurus,
I am not an expert with Java´s configuration, and I have a situation that I don´t understand. First of all, I am working at Centos 6.2 with jdk_1.6 and Tomcat 7.
The problem is...
- If I run Tomcat with JAVA_OPTS="-Xmx128m"* (at catalina.sh) all works fine.
- If I run Tomcat with JAVA_OPTS="-Xmx512m"* (at catalina.sh) an error appears:
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
This appear when I run java -version or when I try to stop Tomcat, and the Tomcat isn´t able to stop.
The strange thing is that my server has more than 200M free in physical memory. So, why Tomcat isn´t able to stop? and Why Java doesn´t use the free memory in my server?
Thanks in advanced.

Hello EJP, thanks for your answer.
I have explained bad.
The server has 703M free when Tomcat is stopped. I had mentioned that my server has more than 200M free in physical memory when Tomcat is running with JAVA_OPTS="-Xmx512m", so I don´t understand why these errors appear.
Do you understand me?
Recently I have checked the swap memory, and it is disabled. In spite of swap memory is disabled I think java wouldn´t need this memory because it has free physical memory
Thanks again.

I have a problem with Java and an e-procurement system integrating

I use an e-procurement system at work and yesterday I could not get my parts list from the suppliers web site to display in our in-house eprocurment finance package.
There is not a problem with the finance package. There is not a problem with the suppliers web site. I have verified both of these by other colleagues being able to complete what I am trying to do.
The difference between my version of Firefox and my colleagues' is that I am on version 6.0.1 and they are on 6.0.
I have had problems with Java not displaying certain animations on the suppliers web site but, my colleague does not and I am suspicious that this is the problem. Can anyone verify this please and what can I do about it. My Java updates are up-to-date as of yesterday and are automatic.
Thanks.

I was quite amazed I never got a reply to this, in the past people here have been helpful. In any case I was finally able to enter this website on the exceptions list in the Java panel, and I believe it is okay now.

Events problem with (Java and ActiveX)

Hi,
I use an ActiveX component with Java and i've got a problem with events.
Java classes were generated with Bridge2Java (IBM).
In order to manage events I added a listener in my application :
javaMyActiveX = new MyActiveX();
javaMyActiveX.add_DMyActiveXEventsListener(new _DMyActiveXEventsAdapter());
I also added a constructor in the _DMyActiveXEventsAdapter class and I fill the body of methods.
The ActiveX generates two types of events :
- The ones are directly generated by methods.
- The others are generated by a thread.
With MS Products (VB, Visual C++, Visual J++), I catch all events.
With java (jdk 1.4), I catch only events generated by methods.
Can anyone help me.

I'm not 100% sure, but the last time I used that bridge, it only worked if you ran your Java app within a Microsoft VM.

MS CAPI with Java

Similar Messages

Maybe you are looking for