MS Cluster & Oracle FailSafe problem
Hi there,
We are using MS Cluster with Oracle FailSafe 3.3.4 on a 2 node cluster.
1 database instance on each of the 2 nodes configured as active/active.
When I stop the MS Cluster service for SAN disk maintenance, the 2 databases are shutdown automatically.
But when MS Cluster service is started up, in Windows Service on both nodes shows that the Oracle listener and Database instance are started.
However, in actual fact, when I try to connect to the database is says that the instance is not started.
When I check the alert logfile, there is no entry where the database is started when MS Cluster service is started.
Is there any additional configuration settings which I need to do on MS Cluster or Oracle FailSafe?
The only way to startup both the listener and database on the 2 nodes is to startup manually.
All the Oracle listeners and Database + disks + network IP are already assigned as resources in their individual cluster group.
In FailSafe manager or MS Cluster admin, I can offline and online the resource group for both nodes. But still, in Windows services, they appear started while in actual fact I still need to start them up manually.
Appreciate any advise.
Cheers
Jim
Message was edited by:
user448006
Hi Tiburon,
no you don't need MSDTC as a resource in the cluster group. I have a similar configuration and following Cluster ressources in my Cluster Group
- Cluster IP Adress
- Cluster Name
- Disk Q (Quorum Disk)
- Oracle Services for MSCS
nothing else in the Cluster Group
Contents of my Oracle Group are
- Disk F
- Disk G
- Disk H
- Disk I
- some more disks all on SAN
- Oracle IP
- Oracle Name
- OracleOraDb10g_DbTNSListenerFslczvsoc01
- ORC1 (Database)
everything works perfect
May be that helps a little
Joachim
Similar Messages
-
Setup test envrionment for windows server 2008r2 cluster + oracle failsafe
Hi All,
Would like to set up windows server 2008r2 cluster + oracle failsafe for testing purpose.
Am new to this. I have a windows 7 desktop machine.
Can i acheive it using virtual box or?
Need your advise here.
thanks!dbaing wrote:
Hi All,
Would like to set up windows server 2008r2 cluster + oracle failsafe for testing purpose.
Am new to this. I have a windows 7 desktop machine.
Can i acheive it using virtual box or?
Need your advise here.
thanks!http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-oel5-using-virtualbox.php -
Problem in adding database to a cluster group in Oracle failsafe
Hi,
I am using WIndows Server 2003 Enterprise edition 64 bit to configure Oracle failsafe 3.4.2 on 2 node cluster. Oracle version is 10.2.0.3.
Verify cluster and Verify standalone database went fine without any error but when I try to add my database to cluster group, it fails with following errors.
==============
30 08:07:10 > FS-10426: Adding the database resource TESTDB.WORLD to group TESTDB
31 08:07:10 FS-10382: node2 : Bringing resource TESTDB.WORLD online
32 08:07:34 ** ERROR : FS-10726: Resource TESTDB.WORLD is in a failed state
33 08:07:34 ** ERROR : FS-10012: Failed to bring the cluster resource TESTDB.WORLD online. Check the Windows event log for messages
34 08:07:34 ** ERROR : FS-10782: The Oracle Database resource provider failed to bring resource TESTDB.WORLD online
35 08:07:34 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
36 08:07:34 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
==========
I checked widows event viewer (application log) and it is showing following error.
source: OracleMSCSServices
Description: Oracle failsafe resource TESTDB.WORLD failed to start.
FS-10999: An internal programming error has occured.
============
windows event viewer (system log) shows following error
Source:CLUsSvc
EventID: 169
Description: Cluster resource TESTDB.WORLD in resource group TESTDB failed.
==================
I applied Oracle failsafe patch 3.4.2.1 as well but it didn't work.
Please help.
Thanks,
AbhiHi Abhi,
i've actual the same problem on Fail safe 3.4.2 and oracle 10.2.0.4.
Do you have a solution by now?!
Regards,
Michael -
Error in Verify Cluster of Oracle FailSafe Manager
Hello,
I am doing SAP ERP6.0 installation on MSCS cluster environment. I have finished the following steps
ASCS Installation,First MSCS Node Configuration,Database Instance Installation,Additional MSCS node configuration, Enqueue Replication Server Installation and Central Instance Installation.
I am now creating the Oracle FailSafe Group on the MSCS node which has the quorum resource in my case the DB node.
After adding the Cluster when I click on Verify Cluster I get error. Below is the VerifyCluster log
1 15:06:04 Starting clusterwide operation
2 15:06:04 > FS-10998:
3 15:06:04 FS-10500: POPWRMSSAPDB : Starting verification of cluster PWRCLUS01
4 15:06:04 > FS-10998:
5 15:06:04 FS-10544: POPWRMSSAPDB : Verifying the cluster quorum resource
6 15:06:04 > FS-10545: Cluster quorum resource QUORUM is located at Q:\Cluster\
7 15:06:04 > FS-10998:
8 15:06:05 ** ERROR : 0x80010105: The server threw an exception.
9 15:06:05 ** ERROR : FS-10757: A COM error was returned when trying to send a work item to the worker
10 15:06:06 The clusterwide operation failed !
Kindly suggest what action should I take to resolve this error.
Regards
Mitesh NairHi and welcome to the forums!
Here are some possible reasons and resolutions.
Let us know how it goes!
Thanks,
Bifocals
KB28396 When installing the BlackBerry Desktop software the following error is received "The installation files cannot be validated. Please verify the installer package and try again."
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Do I use same oracle account on 2 cluster nodes cause problem?
Do I use same oracle account on 2 cluster nodes cause problem?
If I use same oracle account on 2 cluster nodes running 2 database, when failover happens, 2 database will be running on one node, does 2 oracle account make SHM ... memory conflict?
or do I have to use oracle01 account on node1, oracle02 account on node2? Can not use same name account?
Thanks.I'm not 100% certain I understood the question, so I'll rephrase them and answer them.
Q. If I have the same Oracle account on each cluster node, e.g. uid=100 (oracle) gid=100 (oinstall), groups dba=200, can I run two databases, one on each cluster node without problems?
A. Yes. Having multiple DBs on one node is not a problem and doesn't cause shared memory problems. Obviously each database needs a different database name and thus different SID.
Q. Can I have two different Oracle accounts on each cluster node e.g. uid=100 (oraclea) gid=100 (oinstall), groups dba=200 and e.g. uid=300 (oracleb) gid=100 (oinstall), groups dba=200, and run two databases, one for each Oracle user?
A. Yes. The different Oracle user names would need to be associated with different Oracle installations, i.e. Oracle HOMEs. So you might have /oracle/oracle/product/10.2.0/db_1 (oraclea) and /oracle/oracle/product/11.0.1.0/db_1 (oracleb). The ORACLE_HOME is then used to determine the Oracle user name by checking the user of the Oracle binary in the ${ORACLE_HOME}/bin directory.
Tim
--- -
Oracle FailSafe on Windows Cluster - Oracle Service Question
I'm running DB10G R2 on a 2 node Windows 2003 Server cluster.
I have configured Oracle FailSafe and the failover 'appears' to be working correctly but I'm confused as to what/how the DB service works.
When I switch between nodes the OracleService<SID> remains at Started on the node I'm switching from, the service on the newly 'active' node never starts. Is this expected behaviour?
The database is accessible from the clients but I'm guessing (am unable to test/prove) that if I power down node1 it won't be.Why can't you test/prove what happens when you power down node1? A critical part of every cluster implementation should be to perform failure testing.
It's been a while since I've worked with Failsafe, but I do remember that all management is performed through the cluster manager application (can't remember what it is called exactly--the MSCS cluster admin tool). You shouldn't have to worry about the services. You should be able to relocate the database, it's storage (drives) and its associated IP address to the other cluster node and verify via the MSCS app that all services are running on that other node. At that point, the original node (node1 in this case) can be powered off, rolled out of the building, whatever you want--database should remain available on node2.
Dan -
HELP! Oracle FailSafe - Listener fails when adding standalone database
Well, I have a cluster of two nodes with the following specs:
(1) an Oracle 10g database each
(2) Microsoft Cluster Service (MSCS)
(3) Windows Server 2003 64-bit edition
(4) Intel Itanium Processor
(5) Oracle Failsafe 3.3.3 for Windows 2003 64-bit
The 64-bit Oracle Failsafe doesn't come with Oracle Failsafe Manager, so I used a Failsafe Manager remotely from another clustered servers. The version is also 3.3.3, but it's running on a Windows 2000 Advanced Server.
Well, after connecting to the 64-bit cluster, I added the standalone database to a Cluster Group. There are two cluster groups on the Server:
(1)"Cluster Group" (the default cluster group created by MSCS); containing an IP address, a network name, Oracle Cluster Services, and the Quorum hard drive.
(1)"ORACLE DB" A cluster gropu I created for the database; containing another IP address, a network name for the IP address, and every hard drive volumes of the database files.
The database currently resides on the Node 2 (because I created it there). I have successfully verified the database (using "Verify Standalone Database" option). BUT when I added the database into the cluster group ORACLE DB, it failed with the following message:
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
When I opened the Windows Event Viewer, apparently the Listener Service had started, but it soon "terminated unexpectedly":
At first, the Listener Service appeared to be started:
But this is what happened next; it seemed the Listener Service terminated abruptly after entering the running state for a very short time:
What happened? What should I do? What is the problem? Many thanks!
PS: the following are the messages from both Verifying Standalone Database and Adding Standalone Database. The verification was successfull, but I just failed to add the database:
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Verifying standalone database "PAYMENT"
Starting Time: May 11, 2005 19:50:11
Elapsed Time: 0 minutes, 4 seconds
1 19:50:11 Starting clusterwide operation
2 19:50:11 FS-10915: POSDB2 : Starting the verification of standalone resource PAYMENT
3 19:50:11 FS-10371: POSDB2 : Performing initialization processing
4 19:50:11 FS-10371: POSDB1 : Performing initialization processing
5 19:50:12 FS-10372: POSDB2 : Gathering resource owner information
6 19:50:12 FS-10372: POSDB1 : Gathering resource owner information
7 19:50:12 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 19:50:12 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 19:50:12 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 19:50:12 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 19:50:12 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
12 19:50:12 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
13 19:50:12 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
14 19:50:12 FS-10916: POSDB2 : Verification of the standalone resource
15 19:50:12 > FS-10341: Starting verification of database PAYMENT
16 19:50:13 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
17 19:50:13 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
18 19:50:13 > FS-10491: Configuring the Oracle Net service name for PAYMENT
19 19:50:13 > FS-10343: Starting verification of database instance information for database PAYMENT
20 19:50:13 >> FS-10347: Checking the state of database PAYMENT
21 19:50:13 >> FS-10425: Querying the disks used by the database PAYMENT
22 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
23 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
24 19:50:15 FS-10917: POSDB2 : Standalone resource PAYMENT was verified successfully
25 19:50:15 FS-10378: POSDB1 : Preparing for configuration of resource PAYMENT
26 19:50:15 FS-10916: POSDB1 : Verification of the standalone resource
27 19:50:15 > FS-10341: Starting verification of database PAYMENT
28 19:50:15 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
29 19:50:15 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
30 19:50:15 > FS-10491: Configuring the Oracle Net service name for PAYMENT
31 19:50:15 > FS-10343: Starting verification of database instance information for database PAYMENT
32 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
33 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
34 19:50:15 FS-10917: POSDB1 : Standalone resource PAYMENT was verified successfully
35 19:50:15 The clusterwide operation completed successfully, however, the server reported some warnings.
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Adding resource "PAYMENT" to group "ORACLE DATABASE"
Starting Time: May 11, 2005 20:48:43
Elapsed Time: 0 minutes, 7 seconds
1 20:48:43 Starting clusterwide operation
2 20:48:44 FS-10370: Adding the resource PAYMENT to group ORACLE DATABASE
3 20:48:44 FS-10371: POSDB2 : Performing initialization processing
4 20:48:44 FS-10371: POSDB1 : Performing initialization processing
5 20:48:45 FS-10372: POSDB2 : Gathering resource owner information
6 20:48:45 FS-10372: POSDB1 : Gathering resource owner information
7 20:48:45 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 20:48:45 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 20:48:45 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 20:48:45 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 20:48:45 >>> FS-10652: POSDB2 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
12 20:48:45 >>> FS-10652: POSDB1 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
13 20:48:45 FS-10376: POSDB2 : Starting configuration of resource PAYMENT
14 20:48:45 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
15 20:48:46 FS-10380: POSDB2 : Configuring virtual server information for resource PAYMENT
16 20:48:46 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
17 20:48:46 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
18 20:48:46 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
19 20:48:46 > FS-10490: Configuring the Oracle Net listener for PAYMENT
20 20:48:46 >> FS-10600: Oracle Net configuration file updated: F:\ORACLE\PRODUCT\10.1.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
21 20:48:46 >> FS-10606: Listener configuration updated in database parameter file: H:\PAYMENT\admin\pfile\pfilePAYMENT.ora
22 20:48:47 >> FS-10605: Oracle Net listener Fslpos created
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
24 20:48:48 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
25 20:48:48 > FS-10090: Rolling back Oracle Net changes on node POSDB2
26 20:48:50 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource PAYMENT
27 20:48:50 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
28 20:48:50 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
29 20:48:50 FS-10488: POSDB2 : Starting rollback of operation
30 20:48:50 FS-10489: POSDB2 : Completed rollback of operation
31 20:48:50 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
32 20:48:50 Please check your Windows Application log using the Event Viewer for any additional errors
33 20:48:50 The clusterwide operation failed !umm... help? Anyone?
-
Oracle Failsafe - Add Resource to Group
hi to all,
i have a question about using Oracle Failsafe.
I have had a 2 Node Cluster (Czvsor1 and czvsor2) with Clustergroup and Oracle Group with database db1 in it on node czvsor1 with perfect working failover to node czvsor2 managed by Failsafe Manager - All running on windows2003 server.
Now i wanted to bring up a third node czvsor3 with the database ORCFIBU on it, adding this node to cluster , creating a second oracle group on this node, add resource (database) to this group and manage it with failsafe manger to failover to my second node czvsor2 when needed.
Everything went perfect - adding node to cluster, creating and testing oracle group 2 with 2 SAN devices, moving oracle group no node 2 and back again.
BUT adding database to group failed - errors in verifying Devices
Here are the protokolls:
Verify Cluster
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Verifying cluster "CZVSOR03"
Starting Time: Aug 08, 2007 10:42:51
Elapsed Time: 0 minutes, 1 seconds
1 10:42:51 Starting clusterwide operation
2 10:42:51 > FS-10998:
3 10:42:51 FS-10500: CZVSOR1 : Starting verification of cluster CZVSOR03
4 10:42:51 > FS-10998:
5 10:42:51 FS-10544: CZVSOR1 : Verifying the cluster quorum resource
6 10:42:51 > FS-10545: Cluster quorum resource Disk Q: is located at Q:\MSCS\
7 10:42:51 > FS-10998:
8 10:42:51 FS-10660: CZVSOR1 : Gathering cluster information
9 10:42:51 > FS-10998:
10 10:42:51 FS-10660: CZVSOR3 : Gathering cluster information
11 10:42:52 > FS-10998:
12 10:42:52 FS-10660: CZVSOR2 : Gathering cluster information
13 10:42:52 > FS-10998:
14 10:42:52 FS-10502: CZVSOR1 : Verifying the Oracle homes
15 10:42:52 > FS-10645: CZVSOR1 has home OfsHome33 in D:\oracle\Ofs33
16 10:42:52 > FS-10645: CZVSOR1 has home OraDb10g_Db in D:\oracle\product\10.2.0\db_1
17 10:42:52 > FS-10645: CZVSOR3 has home OfsHome33 in D:\oracle\Ofs33
18 10:42:52 > FS-10645: CZVSOR3 has home OraDb10g_Db in D:\oracle\product\10.2.0\db_1
19 10:42:52 > FS-10645: CZVSOR2 has home OfsHome33 in D:\oracle\Ofs33
20 10:42:52 > FS-10645: CZVSOR2 has home OraDb10g_Db in D:\oracle\product\10.2.0\db_1
21 10:42:52 > FS-10998:
22 10:42:52 FS-10501: CZVSOR1 : Verifying the Oracle Services for MSCS installation
23 10:42:52 >>> FS-10652: CZVSOR1 has Oracle Services for MSCS version 3.3.4.0 installed in OfsHome33
24 10:42:52 >>> FS-10652: CZVSOR3 has Oracle Services for MSCS version 3.3.4.0 installed in OfsHome33
25 10:42:52 >>> FS-10652: CZVSOR2 has Oracle Services for MSCS version 3.3.4.0 installed in OfsHome33
26 10:42:52 > FS-10998:
27 10:42:52 FS-10650: CZVSOR1 : Verifying the Oracle Services for MSCS resource providers
28 10:42:52 > FS-10651: Verifying the Generic Service resource
29 10:42:52 >> FS-10665: Checking DLLs for resource provider
30 10:42:52 > FS-10998:
31 10:42:52 > FS-10651: Verifying the Oracle Management Agent resource
32 10:42:52 >> FS-10665: Checking DLLs for resource provider
33 10:42:52 >> FS-10667: Checking for software installation
34 10:42:52 ** WARNING : FS-10658: The Oracle Management Agent software is not installed on any of the cluster nodes
35 10:42:52 > FS-10998:
36 10:42:52 > FS-10651: Verifying the Oracle Application Server resource
37 10:42:52 >> FS-10665: Checking DLLs for resource provider
38 10:42:52 >> FS-10667: Checking for software installation
39 10:42:52 ** WARNING : FS-10658: The Oracle Application Server software is not installed on any of the cluster nodes
40 10:42:52 > FS-10998:
41 10:42:52 > FS-10651: Verifying the Oracle Database resource
42 10:42:52 >> FS-10665: Checking DLLs for resource provider
43 10:42:52 >> FS-10666: Checking for MSCS resource DLLs provided by Oracle
44 10:42:52 >> FS-10667: Checking for software installation
45 10:42:52 >>> FS-10652: CZVSOR1 has Oracle Database version 10.2.0 installed in OraDb10g_Db
46 10:42:52 >>> FS-10652: CZVSOR3 has Oracle Database version 10.2.0 installed in OraDb10g_Db
47 10:42:52 >>> FS-10652: CZVSOR2 has Oracle Database version 10.2.0 installed in OraDb10g_Db
48 10:42:52 > FS-10998:
49 10:42:52 FS-10503: CZVSOR1 : Verifying the network configuration
50 10:42:52 > FS-10510: Public network on the cluster uses subnet 172.22.111.96
51 10:42:52 > FS-10510: Private network on the cluster uses subnet 192.168.32.0
52 10:42:52 > FS-10998:
53 10:42:52 > FS-10512: CZVSOR1 maps to 172.22.111.118, 192.168.32.1 on CZVSOR1
54 10:42:52 > FS-10512: CZVSOR1 maps to 172.22.111.118 on CZVSOR3
55 10:42:52 > FS-10512: CZVSOR1 maps to 172.22.111.118 on CZVSOR2
56 10:42:52 > FS-10998:
57 10:42:52 > FS-10512: CZVSOR3 maps to 172.22.111.120 on CZVSOR1
58 10:42:52 > FS-10512: CZVSOR3 maps to 172.22.111.120, 192.168.32.3 on CZVSOR3
59 10:42:52 > FS-10512: CZVSOR3 maps to 172.22.111.120 on CZVSOR2
60 10:42:52 > FS-10998:
61 10:42:52 > FS-10512: CZVSOR2 maps to 172.22.111.119 on CZVSOR1
62 10:42:52 > FS-10512: CZVSOR2 maps to 172.22.111.119 on CZVSOR3
63 10:42:52 > FS-10512: CZVSOR2 maps to 172.22.111.119, 192.168.32.2 on CZVSOR2
64 10:42:52 > FS-10998:
65 10:42:52 > FS-10512: CZVSOC02 maps to 172.22.111.115 on CZVSOR1
66 10:42:52 > FS-10512: CZVSOC02 maps to 172.22.111.115 on CZVSOR3
67 10:42:52 > FS-10512: CZVSOC02 maps to 172.22.111.115 on CZVSOR2
68 10:42:52 > FS-10998:
69 10:42:52 > FS-10512: CZVSOR03 maps to 172.22.111.117 on CZVSOR1
70 10:42:52 > FS-10512: CZVSOR03 maps to 172.22.111.117 on CZVSOR3
71 10:42:52 > FS-10512: CZVSOR03 maps to 172.22.111.117 on CZVSOR2
72 10:42:52 > FS-10998:
73 10:42:52 > FS-10512: CZVSOC01 maps to 172.22.111.116 on CZVSOR1
74 10:42:52 > FS-10512: CZVSOC01 maps to 172.22.111.116 on CZVSOR3
75 10:42:52 > FS-10512: CZVSOC01 maps to 172.22.111.116 on CZVSOR2
76 10:42:52 > FS-10998:
77 10:42:52 The clusterwide operation completed successfully, however, the server reported some warnings.
That seems to be ok!!
CZVSOR03 Name of Cluster
CZVSOR1/CZVSOR2/CZVSOR3 Name of Nodes
CZVSOC01 Name of first Oracle Group preferred node CZVSOR1
- works perfect -
CZVSOC02 Name of second Oracle Group on Node CZVSOR3
Following reported Problems by adding database to resource
ADD Resource to Group – Oracle Database
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Adding resource "ORCFIBU" to group "Oracle Group 2"
Starting Time: Aug 08, 2007 13:21:28
Elapsed Time: 0 minutes, 31 seconds
1 13:21:28 Starting clusterwide operation
2 13:21:28 FS-10370: Adding the resource ORCFIBU to group Oracle Group 2
3 13:21:28 FS-10371: CZVSOR3 : Performing initialization processing
4 13:21:28 FS-10371: CZVSOR2 : Performing initialization processing
5 13:21:29 FS-10372: CZVSOR3 : Gathering resource owner information
6 13:21:29 FS-10372: CZVSOR2 : Gathering resource owner information
7 13:21:29 FS-10373: CZVSOR3 : Determining owner node of resource ORCFIBU
8 13:21:29 FS-10374: CZVSOR3 : Gathering cluster information needed to perform the specified operation
9 13:21:29 FS-10374: CZVSOR2 : Gathering cluster information needed to perform the specified operation
10 13:21:29 FS-10375: CZVSOR3 : Analyzing cluster information needed to perform the specified operation
11 13:21:29 >>> FS-10652: CZVSOR3 has Oracle Database version 10.2.0 installed in OraDb10g_Db
12 13:21:29 >>> FS-10652: CZVSOR2 has Oracle Database version 10.2.0 installed in OraDb10g_Db
13 13:21:29 FS-10376: CZVSOR3 : Starting configuration of resource ORCFIBU
14 13:21:29 FS-10378: CZVSOR3 : Preparing for configuration of resource ORCFIBU
15 13:21:29 FS-10380: CZVSOR3 : Configuring virtual server information for resource ORCFIBU
16 13:21:30 > FS-10496: Generating the Oracle Net migration plan for ORCFIBU
17 13:21:30 > FS-10490: Configuring the Oracle Net listener for ORCFIBU
18 13:21:30 >> FS-10600: Oracle Net configuration file updated: D:\ORACLE\PRODUCT\10.2.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
19 13:21:30 >> FS-10606: Listener configuration updated in database parameter file: K:\ORCFIBU\initorcfibu.ora
20 13:21:37 >> FS-10605: Oracle Net listener Fslczvsoc02 created
21 13:21:39 >> FS-10602: Oracle Net listener FIBU_1 restarted
22 13:21:39 > FS-10491: Configuring the Oracle Net service name for ORCFIBU
23 13:21:39 >> FS-10600: Oracle Net configuration file updated: D:\ORACLE\PRODUCT\10.2.0\DB_1\NETWORK\ADMIN\TNSNAMES.ORA
24 13:21:39 FS-10381: CZVSOR3 : Creating the resource information for resource ORCFIBU
25 13:21:39 > FS-10424: Checking whether the database ORCFIBU is online
26 13:21:55 > FS-10425: Querying the disks used by the database ORCFIBU
27 13:21:56 ** ERROR : FS-10034: Error while querying for disks used by database instance ORCFIBU
28 13:21:56 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource ORCFIBU
29 13:21:56 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
30 13:21:56 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
31 13:21:56 FS-10488: CZVSOR3 : Starting rollback of operation
32 13:21:56 > FS-10090: Rolling back Oracle Net changes on node CZVSOR3
33 13:21:59 FS-10489: CZVSOR3 : Completed rollback of operation
34 13:21:59 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
35 13:21:59 Please check your Windows Application log using the Event Viewer for any additional errors
36 13:21:59 The clusterwide operation failed !
ANY IDEAS WHATS WRONG????????
Group has 2 SAN DEVICES K and L which i can move without any problems to node czvsor2 and back - but without the database.
Normally my First node CZVSOR1 with Oracle Group CZVSOC01 on it is not involved for i removed this node from the available nodes list in my new group CZVSOC2
DO i have to make K an L available from Node 1 CZVSOR1 ????
General Question is it possible to have a 3 node Cluster with the following Configuration
Node1 with Oracle Group 1 and database 1 managed to failover to node2
Node3 with oracle Group 2 and database 2 managed to failover to node 2
PLEASE I NEED URGENT HELP
MANY MANY THANKS TO ALL!
JoachimYes, but yet not find a solution.
we restarted the installation from scratch and now we are at the phase of the database instance.
We noticed the following during the configuration of the first MSCS node :
at the time where sapinst creates the sap cluster group, we get the error:
"could not create sap cluster group. Please look at R3Clus.log"
Behind it appears a screen where we are prompted to add manually the values. We added manually the values and then the sap cluster group was succesfully created and the configuration of the first MSCS node finished without reporting errors.
But we noticed that although the SAPLOC share is normaly created in HA installation through ASCS installation and automatically removed when processing First MSCS Node, it was not removed at our case.
We would like to know if the whole above symptom is normal or we must
expect problems at the continuing of the installation of ECC6?
If it is not normal what else we can do, so that sapinst do not
stop at the creation of the sap cluster group ? -
Configure OEM on Oracle Failsafe 3.4.2 (11g R2) on windows 2008
Hi Friends,
Please let me know how to configure Oracle Enterprise Manager(OEM) On Oracle Failsafe 3.4.2 (11g R2 Database) on windows 2008.
I found a Metalink Note : 396659.1 but i am unable to open the Note.
Please provide the Proper Note.
Regards,
DBI have the same problem.
My solution is:
1.add OFS group name mapping VIP in DNS
2.add VIP in MSCS manager
3.delete VIP in OFS manager
4.add VIP in OFS manager -
MSCS cluster + oracle + ERP2005 Sr2
Dear All
The below cmd i am not able to execute an Cluster system.
On all MSCS nodes, copy the BR*Tools to the local windows\sapcluster directory with the
following command:
sapcpe.exe source:<path_to_platform_directory>
target:<path_to_%windir%\sapcluster_directory> list:dbatoolsora.lst
regardsrefer Note 1437469 - FS-10658 during Oracle Failsafe Cluster verification
-
Doubts on Oracle Failsafe Shutdown Process
Hello
We have the following configuration in our place.
Two Node Windows Server 2003 Cluster. (Active/Passive Configuration)
Oracle 10.1 Home on Both the nodes.
The database server, datafiles, redo log files are on the shared disk.
Oracle Failsafe Manager 3.4.1 is running on both the nodes.
Now We want to shutdown the whole database and cluster for a migration purpose.We should the system and then SAN sync the image to another place and restart it there.So I need a procedure for clean shutdown and clean startup.By going the Failsafe Documentation and other articles in goggle,I have not got a clear idea about the shutdown process.
As per the documentation ,
For maintenance issues like cold back up ,The process to be followed is:
1.Take the database offline from Oracle Failsafe Manager and it will shutdown the database.
The questions I have is :
1)If I take down the database from Oracle Failsafe Manager on the Active Node,is there any chance that the database will start on the passive node due to failover.
2) Do I have to first shutdown the passive node or put a freeze between the communication link so that it does not failover.
3) Do I have to take the shared disks ,Network Adapters offline from the failsafe manager for a complete shutdown or will the Windows Machine shutdown takes care of it.
Also can someone just throw a brief overview on how to start up the same database on the other cluster.
Any suggestions would be helpful .
Thanks
Sashank>
The questions I have is :
1)If I take down the database from Oracle Failsafe Manager on the Active Node,is there any chance that the database will start on the passive node due to failover.
2) Do I have to first shutdown the passive node or put a freeze between the communication link so that it does not failover.
3) Do I have to take the shared disks ,Network Adapters offline from the failsafe manager for a complete shutdown or will the Windows Machine shutdown takes care of it.
Also can someone just throw a brief overview on how to start up the same database on the other cluster.
Any suggestions would be helpful .
Thanks
Sashank1- When you take it offline on Failsafe it won't come up on the other side till you bring it online.
2- no
3- again no
I could not get the last uestion but If you want to move resources to the other node it can be done via microsoft cluster services.
Coskan Gundogar
Blog: http://coskan.wordpress.com
Twitter: http://www.twitter.com/coskan
Linkedin: http://uk.linkedin.com/in/coskan
--------- -
Guys,
I am planning to install Oracle - 9i DB with Oracle FailSafe Manager on MSCS (Microsoft Cluster Services)
I am following the belows steps
1. Install Oracle - 9i
2. Patch it with 9.2.0.5
3. Setup MSCS services
4. Install Oracle Failsafe Manager on each node
Please do share your thoughts/inputs about the procedure I am following here
ThanksI am also palnning to do the same I will contact u when i proceed and please if u get any info please let me know
thanks
ali -
Oracle Failsafe error and logs
Since I don't see any oracle failsafe forum I post here. Please let me know it this is wrong o there is a better section.
Sometimes when I try to take offline my instance I receive this error:
FS-10890: Oracle Services for MSCS failed during the offline operation
FS-10013: Failed to take the cluster resource ORAWHITE offline
FS-10728: Resource ORAWHITE timed out trying to go offlineThis is very strange since looking the alert log I see that the shutdown takes less than one minute while the timeout is 3 minutes..
Failsafe has any logs that can be investigated?
Hope you can help me.
Cheers
Adrianouser10388158 wrote:
Hi,
i need a little help..
for some reason, my prodcution listerner crashes.. but when looking into the logs of my listener, no error is shown.
even if i check the time stamp, there is no error of the log.forgive me, but I need to ask a simple question.
what proof exists that outage was not an Operating System crash?
if the system crashed, then the Oracle listener would no longer be available to log any connection requests.
Handle: user10388158
Status Level: Newbie
Registered: Mar 10, 2010
Total Posts: 25
Total Questions: 9 (8 unresolved)
why do you waste time here when your questions RARELY get answered? -
Oracle Failsafe + 11G + Windows 2008 Enterprise r2 64bits
Dear Friends,
I need to install a Oracle Fail Safe system on Windows 2008 Enterprise r2 using Oracle 11g, I have some question about this:
1-Can be installed Oracle FailSafe on a Oracle standard edition? or is complete necessary use Oracle Enterprise Edition? 11G.
2-There is a version for 64bits system of the Oracle FailSafe?
2-Failsafe and failsafe manager works under Windows 2008 Enterprise r2 64bits?
Thanks for all the answer.1-Can be installed Oracle FailSafe on a Oracle standard edition? or is complete necessary use Oracle Enterprise Edition? 11G.Oracle Fail Safe environment recommends installing database software on a two-node cluster, so it is possible with 11G
2-There is a version for 64bits system of the Oracle FailSafe? 3-Failsafe and failsafe manager works under Windows 2008 Enterprise r2 64bits?Other two answers are given in the pdf at http://download.oracle.com/docs/cd/E10736_01/doc/relnotes.341/e10719.pdf. you must go through it thoroughly. -
Is SP6a compatible with Oracle Failsafe 2.1.2?
We are using Oracle Database 8.0.5 with Oracle Failsafe 2.1.2 under WindowsNT Server 4.0 (SP5). Now we want to upgrade to SP6a. Does Oracle Failsafe 2.1.2 work properly with SP6a? Please advise.
ThanksThere shouldn't be problems. [url https://metalink.oracle.com/metalink/plsql/f?p=130:14:3453894956402291720::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,207303.1,1,1,1,helvetica]Metalink Note:207303.1
Maybe you are looking for
-
Emailing multiple photos on my iPad
How do I select multiple photos to send in one email?
-
Dear Gurus, Is it possible to plan budget information with internal orders? So that we can run a report and see Actual vs Plan and the variance. Do let me know the process to do this. Thanks for your time. regards, Raj
-
CS3 Mac quits while trying to activate after successful installation
I nstalled CS 3 successfully, but while starting PS or Illy to activate, the programs quit unexpectedly. It took an exceptionally long time for the installer to finish, but it reported no errors, and I got a (paraphrased) "software was successfully i
-
Not able to deploy windows kernel driver on target machine from visual studio
I have created windows kernel driver, and signed it with production certificate. Now I could install this driver on my target machine manually(copying inf, cat and sys). I want to make use of the visual studio 2013's deployment facility to deploy th
-
How read pdf data in C#?
Hi, Is there any way to read pdf data in C#. The application i am working on demands to preserve the layout, formatting from the source and just change the content if required. Is there any open source or commercial API which i can use. Thanks