MS Event viewer ID 1111
Five hours later and thank God I've found you folks; MS suck for this. Event viewer ID 1111 Source TermServiceDevices Driver Adobe PDF converter Printer Adobe PDF is unknown Install driver before you log in again, O.K. This is a message on a Windows Server 2003 SP3. There is no "Physical Printer" attached. No one prints to the two Networked printers from this server that I know of. Can anyone help?
Thanks,
Jim Simmons
Hi Gerry,
From the perspective of a technical support, I'm afraid that it's nearly impossible to directly convert the binary into a meanful output, as described in this event log, "the first four bytes (DWORD) of the Data section contains the status code, the second
four bytes contains the IOSB.Status and the next four bytes contains the IOSB.Information", while we're not familiar with the deep mechanism, and I searched a lot, fail to find anything useful. I think we should focuse on the reason why this event appears
on the customer's computer.
Yolanda Zhu
TechNet Community Support
Similar Messages
-
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Since I could not find a list of the Event Ids that was accurate at all or not too general as to be useless and Microsoft won't let us know how to fix these ourselves without having a programming degree, I am begging for help from anyone who can help
me get my computer working right again. I have some important things to get done which I can't do without my computer working. I have tried to get what I could get but I am blocked from many files which makes it difficult to get info. Please help. I appreciate
any help I can get. Thank you,
WhiteFox42
I am not sure which one is more important.
Event id 20
Installation Failure: Windows failed to install the following update with error 0x80070643: Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems
(KB2468871).
Event id 11
Possible Memory Leak. Application (C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted) (PID: 476) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)]. [allocate(all_nodes)] parameters are always
reallocated; if the original pointer contained the address of valid memory, that memory will be leaked. The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20). User Action: Contact your application
vendor for an updated version of the application.
Event id 455
taskhost (1348) WebCacheLocal: Error -1811 (0xfffff8ed) occurred while opening logfile R:\User\App Data\Roaming\Microsoft\Templates\Local\Microsoft\Windows\WebCache\V01.log.
Event Xml:
Event id 505
wuaueng.dll (1012) SUS20ClientDataStore: An attempt to open the compressed file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" for read / write access failed because it could not be converted to a normal file. The open file operation
will fail with error -4005 (0xfffff05b). To prevent this error in the future you can manually decompress the file and change the compression state of the containing folder to uncompressed. Writing to this file when it is compressed is not supported.
Event id 513
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object
Event id 1000
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.16428, time stamp: 0x525b664c
Faulting module name: IEFRAME.dll, version: 11.0.9600.16476, time stamp: 0x52944cf2
Exception code: 0xc0000005
Fault offset: 0x00025f1d
Faulting process id: 0x1854
Faulting application start time: 0x01cf0735f0e5f0c7
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\Windows\system32\IEFRAME.dll
Report Id: e3dc1e9a-733f-11e3-b920-00215a2af202
Event id 1000
Faulting application name: msiexec.exe, version: 5.0.7601.17514, time stamp: 0x4ce79d93
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x00000000000035e1
Faulting process id: 0x1030
Faulting application start time: 0x01cf01b77867a358
Faulting application path: C:\Windows\system32\msiexec.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: f7253b17-6daa-11e3-b944-00215a2af202
Event id 1002
Computer: w7mar-64 "I don't know why it has computer as this when it should not be."
Description:
The IP address lease 192.168.200.195 for the Network Card with network address 0x08002742F261 has been denied by the DHCP server 192.168.200.1 (The DHCP Server sent a DHCPNACK message).
Event id 1008
The Windows Search Service is starting up and attempting to remove the old search index {Reason: Index Corruption}.
Event id 1008
Computer: w7mar-64
Description:
An errorUser: LOCAL SERVICE
occurred in initializing the interface. The error code is: 0x2.
Event id 1014
User: NETWORK SERVICE
Computer:
Description:
Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded.
Event id 1015
User: N/A
Computer: w7mar-64
Description:
Event ID 1013 for the Windows Search Service has been suppressed 7 time(s) since 12:04:10 PM. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time. See Event ID 1013 for further details
on this event.
Event id 1015
Failed to connect to server. Error: 0x8007043C
Event id 1018
The description for Event ID 1018 from source EvntAgnt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1020
Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i.
Event id 1028
Windows Installer has determined that its configuration data cache folder was not secured properly. The owner of the key must be either Local System or Builtin\Administrators. The existing folder will be deleted and re-created with the appropriate security
settings.
Event id 1101
.NET Runtime Optimization Service (clr_optimization_v4.0.30319_32) - Failed to compile: System.Web.Entity.Design, Version=3.5.0.0, Culture=Neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil . Error code = 0x80010108
Event id 1500
The description for Event ID 1500 from source SNMP cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
6 user registry handles leaked from \Registry\User\S-1-5-21-2959539970-205720217-4182857889-1000:
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Internet Explorer\Main
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies
Event id 3028
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3029
Context: Windows Application, SystemIndex Catalog
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3036
The content source <csc://{S-1-5-21-2959539970-205720217-4182857889-1001}/> cannot be accessed.
Event id 3036
No protocol handler is available. Install a protocol handler that can process this URL type. (HRESULT : 0x80040d37) (0x80040d37)
Event id 4104
Description:
The backup was not successful. The error is: Access is denied. (0x80070005).
Event id 4228
TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
Event id 4321
The name "WHITEFOXPC :0" could not be registered on the interface with IP address 192.168.1.21. The computer with the IP address 192.168.1.19 did not allow the name to be claimed by this computer.
Event id 4373
The description for Event ID 4373 from source NtServicePack cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 4879
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system WHITEFOXPC.
Event id 6000
The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Event id 6006
The winlogon notification subscriber <TrustedInstaller> took 186 second(s) to handle the notification event (CreateSession).
Event id 7000
The Windows Audio service failed to start due to the following error:
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration.
Event id 7001
The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start.
Event id 7010
The index cannot be initialized.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 7023
The Block Level Backup Engine Service service terminated with the following error:
%%-2147024713
Event id 7024
The Windows Search service terminated with service-specific error %%-1073473535.
Event id 7026
The following boot-start or system-start driver(s) failed to load:
aswKbd
aswRvrt
aswSnx
aswSP
aswTdi
aswVmm
discache
spldr
Wanarpv6
Event id 7030 & 7031
The dldw_device service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
Event id 7032
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Windows Installer service, but this action failed with the following error:
An instance of the service is already running.
Event id 7040
The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index.
Event id 7042
The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt.
Details:
The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 8210
An unspecified error occurred during System Restore: (Installed Java 7 Update 45). Additional information: 0x80070003.
Event id 9000
The Windows Search Service cannot open the Jet property store.
Details:
0x%08x (0xc0041800 - The content index database is corrupt. (HRESULT : 0xc0041800))
Event id 10005
DCOM got error "1084" attempting to start the service MSIServer with arguments "" in order to run the server:
{000C101C-0000-0000-C000-000000000046}
Event id 10010
15 of these with different server codes which I can't copy unless I copy all the details.
The server {3EEF301F-B596-4C0B-BD92-013BEAFCE793} did not register with DCOM within the required timeout.
Event id 12348
Volume Shadow Copy Service warning: VSS was denied access to the root of volume \\?\Volume{8e79517c-6c41-11e3-b621-cb03f0618d54}\. Denying administrators from accessing volume roots can cause many unexpected failures, and will prevent VSS from functioning
properly. Check security on the volume, and try the operation again.
Event id 15006
9 of these.
Description:
Owner of the log file or directory \SystemRoot\System32\LogFiles\HTTPERR\httperr1.log is invalid. This could be because another user has already created the log file or the directory.
Event id 31004
33 of tese.
The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
The End.
Kimberly D. White-FoxPlease provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key
(alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed.
You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode.
Please upload and share with everyone copies of your System and Application logs from your Event Viewer to your Sky Drive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window select Windows
Logs and System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Some Event Viewer reports are generated solely because the computer is in safe mode or safe mode with networking. You have at least one example of this in your long list. If you do not see the same report for a time when
the computer was in normal mode then it can be disregarded.
You will find some general advice on interpreting Event Viewer reports here:
http://www.gerryscomputertips.co.uk/syserrors5.htm
Hope this helps, Gerry -
No sound, explorer.exe not starting, no event viewer
I set up a new PC recently and installed Windows 7 Pro. Approximately once every few days I get a problem which, oddly, has several seemingly different manifestations. I mean that if I see one of these, all the others can be observed as well, until I reboot.
These manifestations are:
Windows Media Player will not play an audio file (.wav, .mp3), usually just hanging. VLC player will not hang but will not produce sound either. Video content is played OK though.
Explorer (if started by left clicking on the toolbar button) will bring up the message “Invalid signature” and won’t start. If started by right clicking and then selecting one of the folders in the “last used” list it will start OK though.
Computer – Manage will dim screen and display a UAC message (normally it would start straight away). After getting through this message, the “Computer Management” window will duly pop up, but it will be missing the Event Viewer item in the left panel.
I could find nothing suspicious in the event logs.I'm adding another image: Task Manager:
I thought it's worthwhile because total CPU usage shows 12% (and it stayed for a while around that value), but each individual process was consuming 0%.
There were a few error messages in Application and System logs but I think I saw them quite often, so they were not specific for this occasion. They are:
WMI error:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events
cannot be delivered through this filter until the problem is corrected.
User Profile Service warning:
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
10 user registry handles leaked from \Registry\User\S-1-5-21-1620775572-3903616698-3239891420-1000:
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary\Scanner
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary\Scanner
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
Process 2060 (\Device\HarddiskVolume2\Program Files (x86)\Common Files\Ahead\Lib\NMIndexingService.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Ahead\Nero Home\MediaLibrary
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\My
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\CA
Process 880 (\Device\HarddiskVolume2\Windows\System32\lsass.exe) has opened key \REGISTRY\USER\S-1-5-21-1620775572-3903616698-3239891420-1000\Software\Microsoft\SystemCertificates\Disallowed
Search error:
Unable to initialize the filter host process. Terminating.
Details:
This operation returned because the timeout period expired. (HRESULT : 0x800705b4) (0x800705b4)
Distributed COM error:
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
and APPID
{344ED43D-D086-4961-86A6-1106F4ACAD9B}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Service Control Manager error:
A timeout was reached (30000 milliseconds) while waiting for the Optimizer Pro Crash Monitor service to connect.
Service Control Manager error:
The Windows Modules Installer service terminated with the following error:
The handle is invalid. -
Events show pictures in Events view but have no contents when opened
Hi. Using iPhoto 9.5.1 with Mavericks 10.9.1 with library storage on Mavericks Server. When I go to Events view (under Library on the upper left navigation panel) I see events and on each I can hover over and scroll through and see the pictures. When I double click to open the event, no photos show. When I go to Photos view I see the pictures.
Thoughts on what to do? Thanks.Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
-
How do you change the Event Viewer archive location in Server 2008 R2?
We're wanting to redirect the security and system event viewer logs to the D:\ on a Server 2008 R2 box
We've got the current logs to save there, however all archived system/security logs are still being saved on the c:\ in their default location in %windir%\system32... and killing the OS partition.
I can write something up in PoSh and schedule it, but I'd rather use any built-in capabilities first...
I've taken a peek in the HKLM\Services\CurrentControlSet... hive where the event viewer behavior is configured and do not see an option to set a path for the archive location...Unfortunately, you cannot customize the location of archived event logs in Windows. The logs will always be archived to %windir%\system32\Winevt\Logs\Archive-xxxxxx
There'd be some scripts can help you automatically archived logs to another location. You can find them here: http://gallery.technet.microsoft.com/scriptcenter/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=security
Regards,
Zhang
TechNet Subscriber Support
If you are
TechNet Subscriptionuser
and have any feedback, please send your feedback here. -
Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com -
Windows is Scanning and repairing drive... (- Errors in Event Viewer)
Long post, please be patient... :)
I have a fairly new (purchased 8/2013) Lenovo ThinkPad T431s with Windows 8.1 Pro 64-bit (updated from 8.0 -> 8.1). It has a very tricky error coming basically 8 / 10 boots:
Windows is Scanning and repairing drive...
Error details from Windows Event Viewer (a new similar error appears on every boot to event viewer):
A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference
number of the file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
What has been done 1st trying to fix that:
SSD disk has been changed (image from previous SSD copied back) ->
no solution, error remains
chkdsk /F /R -> no solution, error remains
SFC /scannow -> no solution, error remains
dism /online /cleanup-image /restorehealth -> no solution, error remains after a few boots
TRIED using Windows 8.1 "Update & Recovery -> Refresh Your PC without affecting your files" -> Inserted the Lenovo "Operating System Recovery Disk Windows 8 Pro (OEM Activation 3.0 Required)" BUT Windows did not accept
that DVD claiming "The media inserted is not valid"... ???
Ended up calling Lenovo Support and they instructed me to order the Recovery DVD from
Lenovorecovery.com -> Unfortunatelly Windows does not recognice the DVD(s)...
mountvol returns:
\\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3}\
(This is my C:\ drive where Windows installation resides)
\\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7}\
*** NO MOUNT POINTS ***
\\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\
*** NO MOUNT POINTS ***
\\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897}\
*** NO MOUNT POINTS ***
Then running fsutil dirty query on each returns:
Volume - \\?\Volume{4d337687-0033-42f7-8a8e-b6968b533cb3} is NOT Dirty
Volume - \\?\Volume{e010cf9d-c04d-4c82-b517-3cda1b647fe7} is NOT Dirty
Volume - \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} is Dirty
Volume - \\?\Volume{33f0062f-0aff-4fd2-8402-1c7911d86897} is NOT Dirty
The chkdsk on the dirty volume
\\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}\ returned:
The type of the file system is NTFS.
Insufficient storage available to create either the shadow copy storage file or
other shadow copy data.
A snapshot error occured while scanning this drive. Run an offline scan and fix.
Diskpart output on the same volume:
DISKPART> lis par
Partition ### Type Size Offset
Partition 1 Reserved 128 MB 17 KB
Partition 2 Recovery 1000 MB 129 MB
Partition 3 System 260 MB 1129 MB
Partition 4 Primary 146 GB 1389 MB
Partition 5 Recovery 350 MB 147 GB
Partition 6 Recovery 19 GB 148 GB
Questions:
1) Are my Partitions OK, haven't "touched" anything?
2) Excluded the dirty volume from boot checking with chkntfs /x
-> still the Error appears in Event viewer log (but Scanning is skipped/not shown anymore during the boot).
What is causing the error?
3) Why do I have three (3) recovery partitions?What has happened in the past days:
A) Lenovo on-site-Support changed the motherboard -> had no impact on the error (which I expected).
B) I found
instructions how to manually create USB Flash stick with a booting Custom (OEM) Recovery Image.
C) Booted with USB and performed "Refresh your PC without affecting your files."
D) Windows was refreshed but...
-->>
Still the error remains (Windows scanning and repairing drive \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} on each and every boot.
1) Related Error in Event viewer (NTFS):
A corruption was discovered in the file system structure on volume \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984}.
A file on the volume is no longer reachable from its parent directory. The parent file reference number is 0x2000000000002. The name of the parent directory is "". The parent index attribute is ":$I30:$INDEX_ALLOCATION". The file reference number of the
file that needs to be reconnected is 0x400000003db80. There may be additional files on the volume that also need to be reconnected to this parent directory.
2) Related Error in Event viewer (NTFS - Microsoft Windows NTFS):
Volume \\?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5) needs to be taken offline to perform a Full Chkdsk. Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via
PowerShell.
-->>
Now Lenovo support is proposing a full re-install (to be performed by myself) of Windows as this is SW issue.
Summary:
- Refreshing my T431s with OEM Image does not help
- The error remains on \?\Volume{f62db2cf-efe4-4b55-a3f7-0e7db991a984} (\Device\HarddiskVolume5; Lenovo Recovery partition) OR at least Windows thinks so... -
Illustrator CC crashes on startup(windows event viewer message included)
Windows event viewer shows like this...
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-12-09T06:35:08.000000000Z
EventRecordID
71639
Channel
Application
Computer
HPNB-dhleeNB
Security
EventData
Illustrator.exe
17.0.0.260
52822426
ntdll.dll
6.1.7601.18247
521ea8e7
c0000374
000ce753
a690
01cef4a8afb2dd09
C:\Program Files (x86)\Adobe\Adobe Illustrator CC\Support Files\Contents\Windows\Illustrator.exe
C:\Windows\SysWOW64\ntdll.dll
0b8a3ab7-609c-11e3-8e0d-005056c00008
Please help.Problem solved. Refer to below.
3 posts
Nov 25, 2013
2.AlanDrVita,
Nov 26, 2013 9:16 AM in reply to outdoorz
Report
I may have been able to resolve my issue. I held shift while opening Illustrator and opened it in a bare bones mode, then closed it and reopened it without getting the error message. Good luck to you.
Was this helpful? Yes No -
IPhoto events view broken after import, images missing
I'm running the latest iPhoto on a 10.8.2 Retina MacBook Pro and experience some strange import problems since the end of last month.
My library holds more then 26.000 images right now and whenever I try to import some new images by dragging them from Finder to the iPhoto library the images (and videos) get imported... but when I try to view the event afterwards it doesn't open and the scrolling of the complete events view is broken. The scrollbar moves but thumbnails of events don't! I'm not able to use the events view anymore after a try to open such broken event.
When I use the regular photos view (the 2nd item in the left menu) I can see and use these new images... until I quit and restart iPhoto. Afterwards many images are missing – see http://cl.ly/JrjF for an example. I can delete those broken events... but not empty the trash afterwards. It just hangs while purging all entries.
Has anyone experienced this already?
I'm importing iPhone images uploaded to the DropBox "Camera Uploads" folder. But I can't believe it has to do with anything related to this.
I've also disabled the Photostream feature (not the shared ones) in iPhoto because I got tired of splitted events due to Photostream missing some images now and then. Maybe it has to do with that disabled feature. I'll try to reenable it after restoring my 5 days old backup (120GB) a second time now.
Thanks for your help... let's hope I can solve this.This sounds like a damaged database.
Try this test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If it's not then back to your main Library:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Hi brothers,
After installed the Moss 2007(basic) , I find some error in event view. The event ID is "6102". More detail information is shown below.
Event Type: Error
Event Source: Office SharePoint Server
Event Category: Launcher Service Event ID: 6102Date: 11/27/2007Time: 8:22:17 AMUser: N/AComputer: MOSS-001Description:LoadBalancer.RegisterLauncher failed: Unable to connect to the remote server For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help me, thanks.Hi,
i think this has to do with the "Document Conversions Load Balancer Service".
If you don't need the service than try to stop it:
Start Central Administration > Operations > Services and stop the service.
or
If you need it the service, try this:
Start Central Administration > Operations > Service Account
Change the service account to "Document Conversions Load Balancer Service" And Select a "Network Services" Click Save
Hope this helps!
Cheers,
Daniel Bugday
Web:
SharePoint Forum
Blog:
Daniel Bugday's SharePoint Blog -
Error in starting nidevldu and nipxirmu services (windows event viewer)
A computer running Windows XP SP1 and a Visual basic (V6.0) application that I've developped had crashed several times. I've seen lots of errors in the Windows event viewer saying that the nidevldu and nipxirmu services were trying to start (exact french message : Le service nidevldu est en attente de démarrage et Le service nipxirmu est en attente de démarrage). These messages are real errors (not warning or informations).
I use a 6034E PCI card, Visual basic V6.0 and NI-DAQ 7.4.
The crashes I've seen may be linked with this problem.
Is there a solution?Hi,
I think that you are not going to be starting and stopping the devldu service in normal circumstances... due to crashes !
The firsts steps you have to focus on is to optimize your program in order to avoid crashes, which is not a normal way of work I guess. Then you will be able to avoid these messages!
Regards,
David D. - Application Engineer - NI -
Event Viewer - Error/Warning
Hi,
I am seeing the following errors on the subcriber Event Viewer system log. Does anyone know what is causing this.
Event Type: Error
Event Source: BROWSER
Event Category: None
Event ID: 8032
Date: 4/28/2006
Time: 10:12:19 AM
User: N/A
Computer: CCM_SUB
Description:
The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{81B27D00-C66E-4969-A4CA-A2E89101A90E}. The backup browser is stopping.
Data:
0000: 05 00 00 00 ....
and also this
Event Type: Warning
Event Source: BROWSER
Event Category: None
Event ID: 8021
Date: 4/28/2006
Time: 10:12:19 AM
User: N/A
Computer: CCM_SUB
Description:
The browser was unable to retrieve a list of servers from the browser master \\CCM_PUB on the network \Device\NetBT_Tcpip_{81B27D00-C66E-4969-A4CA-A2E89101A90E}. The data is the error code.
Data:
0000: 05 00 00 00 ....
Cheers,
Rafiq.http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_troubleshooting_guide_chapter09186a008011b369.html#wp1047403
Browser Service: Every 2 Hours, an Error Occurs in the Event Log on the Subscriber
Symptom
Error Message The browser server has failed to retrieve the backup
list too many times on transport \Device\netBT_Tcpip (c96xxx)
The backup browser is stopping.
Warning: The browser was unable to retrieve a list of servers from the browser master \\AACCMP1 on the network \Device\netBT_Tcpip (c96xxx) the data is the error code.
Probable Cause
Cause indicates a NIC card problem. You need to upgrade the OS to a newer version.
Corrective Action
Procedure
Step 1 If you have an MCS-7830 and build the OS with the new 2000.1.2 OS installation, run the OS upgrade version 2000.1.3 to fix the NIC card problem.
If this is not your problem, verify the following actions:
Step 2 Ensure that your WINS address is correct.
Step 3 Ensure that Enable NetBIOS over TCP/IP is chosen.
Step 4 Ensure that the WINS address is correct on the master browser \\AACCM1.
Cheers
Please rate post if helpful. -
Hi!
So, the problem started after I moved the BusinessObjects XI 3.1 server from hardware environment to a virtual environment.
This is the event log warning:
Unable to contact server EEEL132.WebApplicationContainerServer on machine eeel132 to perform status notification. Please check the server's system log for errors.
EEEl132 is the hostname of the server.
Event ID is 33017
Source BusinessObjects_CMS
Any idea how to remove the warning from the event viewer and fix the problem?
Regards,
Tarvihttp://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_troubleshooting_guide_chapter09186a008011b369.html#wp1047403
Browser Service: Every 2 Hours, an Error Occurs in the Event Log on the Subscriber
Symptom
Error Message The browser server has failed to retrieve the backup
list too many times on transport \Device\netBT_Tcpip (c96xxx)
The backup browser is stopping.
Warning: The browser was unable to retrieve a list of servers from the browser master \\AACCMP1 on the network \Device\netBT_Tcpip (c96xxx) the data is the error code.
Probable Cause
Cause indicates a NIC card problem. You need to upgrade the OS to a newer version.
Corrective Action
Procedure
Step 1 If you have an MCS-7830 and build the OS with the new 2000.1.2 OS installation, run the OS upgrade version 2000.1.3 to fix the NIC card problem.
If this is not your problem, verify the following actions:
Step 2 Ensure that your WINS address is correct.
Step 3 Ensure that Enable NetBIOS over TCP/IP is chosen.
Step 4 Ensure that the WINS address is correct on the master browser \\AACCM1.
Cheers
Please rate post if helpful. -
BI 4.1 Multiple Errors on Event Viewer
Hi
My client uses BI Platform 4.1 Support Pack 1 Patch 1. During the past 2 days, there have been several errors logged on the Event Viewer on the BO server. Now, the infoview platform is unresponsive and just hangs for all the users. On having a look at the Services in CMC, the WebI Processing Server status was "STARTING" though nobody had manually tried to stop/start it. So, when I checked the event viewer fr any further errors, there were several repetitive errors which were logged:
1) Log Name: Application
Source: Server Intelligence Agent
Date: 22/07/2014 20:04:44
Task Category: Error
Level: Error
Description:
Server Intelligence Agent: server BO.WebIntelligenceProcessingServer is being recycled.
2) Log Name: Application
Source: BusinessObjects_cms
Date: 23/07/2014 06:29:57
Task Category: Database
Level: Warning
Description:
Database access error. Reason [Microsoft][SQL Server Native Client 10.0][SQL Server]Transaction (Process ID 60) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.. (FWB 00090)
(This warning is recorded multiple times)
3) Log Name: Application
Source: BusinessObjects_cms
Date: 23/07/2014 09:47:38
Task Category: OSCA_Services
Level: Error
Description:
CMS Server Watcher: server named 'W2K8R2_BO.WebIntelligenceProcessingServer' is being marked as down because it is unresponsive
(This error is recorded multiple times within 20 minutes). IT restarted the server and BO is now working fine.
I could not locate any other errors which would give me some more insight to the root cause of these errors. Could someone share some useful posts/links about similar kinds of errors? I tried to search on the forum, and i see suggestions stating that it could be related to network or connectivity. I'm not quite sure though.
Many Thanks
DEThanks Sebastian
We had to restart the SIA and the deadlock issues stopped appearing. For a couple of hours everything was running fine, until we noticed the following errors.
Log Name: Application
Source: Application Error
Date: 23/07/2014 13:04:16
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Description:
Faulting application name: WIReportServer.exe, version: 14.1.1.1072, time stamp: 0x52310a77
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x1b68
Faulting application start time: 0x01cfa65efeb52f5b
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64\WIReportServer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d95bdba2-1269-11e4-x3x3ds-6c3be5befa0c
Log Name: Application
Source: Server Intelligence Agent
Date: 23/07/2014 13:04:22
Event ID: 4096
Task Category: Error
Level: Error
Keywords: Classic
User: N/A
Description:
[Node Name:BO]
[User Name: BO$]
Server Intelligence Agent: server BO.WebIntelligenceProcessingServer stopped unexpectedly.
The WIPS restarted itself. Is there a definite root cause for this issue?
Many thanks
DE
Maybe you are looking for
-
Converting CMYK PDF in InDesign to only hold 2 PMS / Black.
I've been given a PDF file to place in InDesign that has bleeds and needs to carry only three colors. PMS 185c, PMS 300c, and Black. However the original PDF file the client sent has a logo on the cover and back cover that holds CMYK and a third PMS
-
Display resolution (dpi)
Hi, I was doing some scaling from my private pictures and wanted to fit the size perfectly on my mbp display. So, I knew, I have a native resolution of 1680x1050, but there is a third factor: The dpi. The "standard" is 72 dpi for all pictures you wan
-
Vendor as ship-to-party?
Could someone please advice: We need to deliver materials to subcontractors also without reference to subcontracting order. As I understand I must have ship-to-party for the subcontractor to create a delivery, but how do I create this and assign it
-
Hello, I dont know much about flash, and this is making me crazy. I have to separate flash files and I want to combine them together in one flash file. I have set the right dimensions on the stage, but the problem is when I select all frames and past
-
On startup I get this message "/Library/Startup/Icon has not been started because it does not have the proper security settings" I click on OK to get rid of message When I migrated to Snow Leopard I thought it might be solved but no. I have now migra