MS Exchange 2010 Sp3 Ent Migration to Exchange 2013
Hello,
We currently have 2 Exchange 2010 SP3 servers in 1 DAG. Both servers host CAS, Mailbox and Hub Role.
I want to introduce a 3<sup>rd</sup> Exchange 2013 Server and slowly move users onto a new DAG I build in Exchange 2013.
Can I create a 3<sup>rd</sup> Exchange 2013 Server with CAS and Mailbox Server Role and make the 3<sup>rd</sup> Exchange server (2013) a member of the existing (2010) CAS array then slowly perform local move requests for users mailboxes
from my Exchange 2010 DAG to the Exchange 2013 DAG without any disruption to my outlook, OWA and AS clients?
Exchange 2010 (Windows 2008 R2)
Exchange 2013 (Windows 2012 R2 DataCenter)
Hi,
In Exchange 2013, all Outlook connectivity (Internal and External) takes place over Outlook Anywhere(RPC/HTTP). Thus, CAS array which is used internal for RPC/TCP protocol (MAPI) no longer exists in Exchange 2013.
For your coexistence environment and the plan to migrate all mailboxes to Exchange 2013 in the future,
we need to set all virtual directories for CAS 2013 and enable Outlook Anywhere for Exchange 2010. If the mailbox is moved to Exchange 2013, the Outlook client would connect to the server which is set in Outlook Anywhere External host name
and Internal host name instead of CAS array. If all configurations are proper, CAS 2013 would also proxy the service requests for Exchange 2010 users.
Here are some reference about Client Connectivity in an Exchange 2013 Coexistence Environment:
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
Exchange 2013 Client Access Server Role
http://blogs.technet.com/b/exchange/archive/2013/01/25/exchange-2013-client-access-server-role.aspx
Exchange Server 2013 Client Access Server High Availability
http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
Exchange 2010/2007 to 2013 Migration and Co-existence Guide
http://msexchangeguru.com/2013/05/10/exchange2013-migration/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Winnie Liang
TechNet Community Support
Similar Messages
-
Office 365 Pro Plus Exchange 2010 Sp3 Hybrid Migration Deployment
I received Error of Basic Authentication when I try to Add the Exchange online by Add forest option using EMC ....
I have not created the Certificate yet also not created public DNS records
Kindly help
adnan abdul Salam InfoTechissue resolved by restarting WinRM service
adnan abdul Salam InfoTech -
Migrate from Exchange Server 2010 sp3 to 2013 sp1
I have one Exchange Server 2010 SP3 server (300 mailboxes) installed on Windows Server 2008 R2 SP1 with three major roles on it (CAS, MB and HT) - typical installation. Edge Transport server is not installed thus for controlling of mail flow
Symantec Messaging Gateway Virtual Appliance is used as Smart Host. UM server is not installed either. I set up test domain environment where I installed one domain controller (Windows Server 2008 R2 SP1) and one Exchange Server 2010 SP3 (Windows
Server 2008 R2 SP1) at first place and yesterday I did everything necessary to install Exchange Server 2013 SP1 on new test virtual server running Windows Server 2012 R2 which I successfully did.
Now in test domain I have two Exchange Servers (2010 SP3 and 2013 SP1). Is there any 100% reliable documentation with all actions that had to be taken in order to successfully migrate Exchange Server 2010 SP3 to 2013 SP1? I would want to know what
needs to be done not only for my scenario but also for other scenarios (DAG, CAS array, Edge, UM, multiple HT servers . . .) since I am interested in digging deep into Exchange Server 2013.
Hi BoxiKG,
In addition to the above mentioned, and this for your reference:
Upgrade from Exchange 2010 to Exchange 2013
http://technet.microsoft.com/en-us/library/jj898583(v=exchg.150).aspx
Best regards,
Eric -
Exchange Server 2010 SP3 Databases are not mounting after the recovery process
Hi,
We are using Exchange server 2010 SP3 in our office. Databases are stored in an ISCSI drive mapped with the exchange. We are taking daily full backup of my Exchange server using Symantec Backup exe 2012. As a testing purpose I created a test environment
same like my existing live environment to check the disaster recovery and backup. Thankfully disaster recovery worked well and I am able to open the exchange management console and powershell. But I am not able to mount the recovered databases ending
with an error saying "Couldn't mount the database that you specified. Specified database: officialrecover; Error code:
An Active Manager operation failed.........." and even I am not able to use the utility eseutil.exe to the database with an error "access to source database failed with jet error 1811". I am able to create a new database and mount
it.
I am using Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 in the Live environment with 3 partitions called C (279 GB), E (4.46 TB, ISCSI), F (976 GB) in my Live environment.
For test it is Windows Server Ent 2008 R2 64 Bit with Exchange Server 2010 SP3 with 3 partitions C (240 GB), E (1.4 TB), & F (240 GB).
Please help me with your valid comments to solve and mount the database and close the issue for ever.
With Regards
JayJared is correct that in essence the message is saying the DB cannot be found.
When you restored to your recovery server are all the paths the same, i.e. if the DB existed on E:\XYZ on the production server it must be the same on the recovery server
When you restored into the recovery site do you have AD restored into that site as well?
For the recovery server are you using iSCSI storage for it as well? If so am I correct to assume that you have copies of the databases just for use on this server and are not trying to reference the same instance of the DB from the production
and test/recovery server?
I have also seen an issue where DB's getting written to disk from Symantec mess up the header of the DB. If you want to validate that the DB is actually intact and accessible you might want to check out our DigiScope product
http://www.lucid8.com/product/digiscope.asp using a free DEMO license. If it works i.e. you are able to mount in DigiScope from same location where its failing on the recovery server we know the
DB your pointing at is good and accessible from the current path but something else is amiss in your configuration
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
2007 --> 2010 --> 2013 with Lucid8's
DigiScope -
Hi,
I currently have a single Exchange 2010 Server that has all the roles supporting about 500 users. I plan to upgrade to 2013 and move to a four server HA Exchange setup (a CAS array with 2 Server as CAS servers and one DAG with 2 mailbox Servers). My
goal is to plan out the transition in steps with no downtime. Email is most critical with my company.
Exchange 2010 is running SP3 on a Windows Server 2010 and a Separate Server as archive. In the new setup, rather than having a separate server for archiving, I am just going to put that on a separate partition.
Here is what I have planned so far.
1. Build out four Servers. 2 CAS and 2 Mailbox Servers. Mailbox Servers have 4 partitions each. One for OS. Second for DB. Third for Logs and Fourth for Archives.
2. Prepare AD for exchange 2013.
3. Install Exchange roles. CAS on two servers and mailbox on 2 servers. Add a DAG. Someone had suggested to me to use an odd number so 3 or 5. Is that a requirement?
4. I am using a third party load balancer for CAS array instead of NLB so I will be setting up that.
5. Do post install to ready up the new CAS. While doing this, can i use the same parameters as assigned on exchange 2010 like can i use the webmail URL for outlook anywhere, OAB etc.
6. Once this is done. I plan to move a few mailboxes as test to the new mailbox servers or DAG.
7. Testing outlook setups on new servers. inbound and outbound email tests.
once this is done, I can migrate over and point all my MX records to the new servers.
Please let me know your thoughts and what am I missing. I like to solidify a flowchart of all steps that I need to do before I start the migration.
thank you for your help in advanceHi,
okay, you can use 4 virtual servers. But there is no need to deploy dedicated server roles (CAS + MBX). It is better to deploy multi-role Exchange servers, also virtual! You could install 2 multi-role servers and if the company growths, install another multi-role,
and so on. It's much more simpler, better and less expensive.
CAS-Array is only an Active Directory object, nothing more. The load balancer controls the sessions on which CAS the user will terminate. You can read more at
http://blogs.technet.com/b/exchange/archive/2014/03/05/load-balancing-in-exchange-2013.aspx Also there is no session affinity required.
First, build the complete Exchange 2013 architecture. High availability for your data is a DAG and for your CAS you use a load balancer.
On channel 9 there is many stuff from MEC:
http://channel9.msdn.com/search?term=exchange+2013
Migration:
http://geekswithblogs.net/marcde/archive/2013/08/02/migrating-from-microsoft-exchange-2010-to-exchange-2013.aspx
Additional informations:
http://exchangeserverpro.com/upgrading-to-exchange-server-2013/
Hope this helps :-) -
Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration
Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1722
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 323
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1237
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 313
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 311
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
Lid: 15000 dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 18
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 10060
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 318
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
Lid: 53361 StoreEc: 0x977
Lid: 51859
Lid: 33649 StoreEc: 0x977
Lid: 43315
Lid: 58225 StoreEc: 0x977
Lid: 39912 StoreEc: 0x977
Lid: 54129 StoreEc: 0x977
Lid: 50519
Lid: 59735 StoreEc: 0x977
Lid: 59199
Lid: 27356 StoreEc: 0x977
Lid: 65279
Lid: 52465 StoreEc: 0x977
Lid: 60065
Lid: 33777 StoreEc: 0x977
Lid: 59805
Lid: 52487 StoreEc: 0x977
Lid: 19778
Lid: 27970 StoreEc: 0x977
Lid: 17730
Lid: 25922 StoreEc: 0x977
+ CategoryInfo : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
+ FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Problems installing Mailbox role on Exchange Server 2010 SP3
I am in the process of installing Exchange Server 2010 SP3 on a Windows Server 2012 server in order to migrate our existing Exchange 2003 server. Everything went well with the installation process until I went to add the Mailbox server role, which is giving
me the following error (from the log file):
[05/03/2013 21:58:09.0090] [1] Executing:
$wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
$manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
[05/03/2013 21:58:09.0105] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'TAM-FS2.tacomaartmuseum.org', Preferred Global Catalog: 'TAM-FS2.tacomaartmuseum.org', Preferred Domain
Controllers: '{ TAM-FS2.tacomaartmuseum.org }'
[05/03/2013 21:58:09.0105] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
[05/03/2013 21:58:09.0276] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
[05/03/2013 21:58:09.0344] [2] Process standard output:
[05/03/2013 21:58:09.0344] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
[05/03/2013 21:58:09.0347] [2] [ERROR] Unexpected Error
[05/03/2013 21:58:09.0347] [2] [ERROR] Process execution failed with exit code 87.
[05/03/2013 21:58:09.0350] [2] Ending processing Start-SetupProcess
[05/03/2013 21:58:09.0350] [1] The following 1 error(s) occurred during task execution:
[05/03/2013 21:58:09.0350] [1] 0. ErrorRecord: Process execution failed with exit code 87.
[05/03/2013 21:58:09.0350] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
[05/03/2013 21:58:09.0351] [1] [ERROR] The following error was generated when "$error.Clear();
$wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
$manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
" was run: "Process execution failed with exit code 87.".
[05/03/2013 21:58:09.0351] [1] [ERROR] Process execution failed with exit code 87.
[05/03/2013 21:58:09.0351] [1] [ERROR-REFERENCE] Id=MailboxComponent___13A8A6B7DE0A4fe3BEB5CB1D86105DA3 Component=EXCHANGE14:\Current\Release\PIM Storage\Content Indexing
[05/03/2013 21:58:09.0351] [1] Setup is stopping now because of one or more critical errors.
[05/03/2013 21:58:09.0351] [1] Finished executing component tasks.
[05/03/2013 21:58:09.0393] [1] Ending processing Install-MailboxRole
I've searched all over but can't seem to find any reference to "exit code 87" - does anyone have any ideas?
Thanks,
MattError 87 -with these details below - and a fix. The situation that got me here by the way was an incomplete install that was uninstalled, then installed again.
[02/24/2014 06:49:06.0967] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'xxxxxxxxxxxxxxx', Preferred Global Catalog: 'xxxxxxxxxxxxxxxxxxxxxxxx', Preferred Domain Controllers:
'{ xxxxxxxxxxxxxxxxxxxxxxx }'
[02/24/2014 06:49:06.0967] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
[02/24/2014 06:49:06.0967] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
[02/24/2014 06:49:07.0592] [2] Process standard output:
[02/24/2014 06:49:07.0592] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
[02/24/2014 06:49:07.0592] [2] [ERROR] Unexpected Error
[02/24/2014 06:49:07.0592] [2] [ERROR] Process execution failed with exit code 87.
[02/24/2014 06:49:07.0592] [2] Ending processing Start-SetupProcess
[02/24/2014 06:49:07.0592] [1] The following 1 error(s) occurred during task execution:
[02/24/2014 06:49:07.0592] [1] 0. ErrorRecord: Process execution failed with exit code 87.
[02/24/2014 06:49:07.0592] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
[02/24/2014 06:49:07.0608] [1] [ERROR] The following error was generated when "$error.Clear();
$wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
$manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
" was run: "Process execution failed with exit code 87.".
[02/24/2014 06:49:07.0608] [1] [ERROR] Process execution failed with exit code 87.
I found I could fix this by removing the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Microsoft-Exchange-Troubleshooters/Operational
and everything underneath it.
My guess is that wevtutil didn't like adding an event log where it already existed but was slightly different in setup (no idea how, exactly).
After 24 hours I'll try post again - giving things time to make sure they are actually working. -
Outlook 2013 Category view not updating after Exchange 2010 SP3 RU3
After updating to Exchange 2010 SP3 RU3 last night, users who use categories view in Outlook 2013 are complaining that the view does not update. The alert is received in the notification area and the unread message count next to Inbox updates appropriately.
The view can be force updated by switching between All and Unread, by using Reset View, or closing and opening Outlook. It seems anything that forces a 'redraw' of the view will update it - except for the actual reception of email. I easily replicated
this issue. For reference:
Exchange 2010 SP3 RU3
Windows 7 x64 Ent
Outlook 2013 (15.0.4551.1004) 32-bit
I do see that SP3 RU4 has been released, however the only change listed is a security patch.
Thank you for any ideas.Hi, Everyone –
This has been a known issue for a very long time – we have people at our workplace that are very disappointed since a feature as great as categorizing email (not using tasks) has become broken and has not even been considered to be fixed for
over half a year. It was not fixed in the updates for Patch Tuesday this week.
I would like to confirm that this is an issue with Outlook 2010 and 2013 when running the latest Exchange 2010 and there is NO FIX
– I have scoured the internet for a solution – all proposed "textbook" solutions do not work and I am positive that the issue can be recreated; however, everyone from Microsoft does not mention trying to recreate the issue at all.
The workaround of creating a rule to send new emails to a category could break other pre-existing rules and cause more frustration and wasted time for users/IT before and after the issue is fixed.
Please fix this issue sooner than later, as the Categories view is completely broken and unusable at this point in time.
Regards,
IT Helper -
OOF not working for mailboxes homed on Exchange 2010 server during migration
Hi There
I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
enable OOF via exchange powershell.
Users homed on the exchange 2013 servers does not have any issues.
The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
in the meantime I'm checking if anyone else had similar issues.
Any pointers will be welcome.Hi ,
1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
3.Then please un check the proxy settings in browsers and check the same.
4.please use the command to check the auto discover
test-outlookwebservices
Please check the below links also.
http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
Hi...
Our company is running Exchange Server 2010 SP3 Standart would like to have Shared calendar with organisation running with Exchange online.
We made a Federation trust between organisations and I checked that one certificate was installed and the rule for their domain was created. but when I try to share my calendar I always receive.
"Calendar sharing is not available with the following contacts because of permission settings on your network."
Name I took from GAL or input manually and always same. Forgot to mention that we migrated from Exchange 2003 to 2010 SP3 and all old exchange servers I removed. I tried everything that I know and read and nothing helped.
Hope for your support.
Thank you.1)I deleted everything and made step by step as indicated in your articles.
2) recreated organisation relationship:
RunspaceId : xxxxxxxxxx
DomainNames : {xxxxxxx.microsoftonline.com, xxxxxxxxx.onmicrosoft.com, xxxxxxx.com}
FreeBusyAccessEnabled : True
FreeBusyAccessLevel : LimitedDetails
FreeBusyAccessScope :
MailboxMoveEnabled : False
DeliveryReportEnabled : False
MailTipsAccessEnabled : False
MailTipsAccessLevel : None
MailTipsAccessScope :
TargetApplicationUri : outlook.com
TargetSharingEpr :
TargetOwaURL :
TargetAutodiscoverEpr : https://pod12312.outlook.com/autodiscover/autodiscover.svc/WSSecurity
OrganizationContact :
Enabled : True
ArchiveAccessEnabled : False
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
Name : xxx
DistinguishedName : CN=xxx,CN=Federation,CN=uxx,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=uxxx,DC=com
Identity : Lxx
Guid : a8xxx
ObjectCategory : upxxs.com/Configuration/Schema/ms-Exch-Fed-Sharing-Relationship
ObjectClass : {top, msExchFedSharingRelationship}
WhenChanged : 27/01/2015 3:23:47 PM
WhenCreated : 26/01/2015 9:41:39 AM
WhenChangedUTC : 27/01/2015 8:23:47 PM
WhenCreatedUTC : 26/01/2015 2:41:39 PM
OrganizationId :
OriginatingServer : xxx.upxxxns.com
IsValid : True
3. Configured Sharing Policies:
[PS] C:\Windows\system32>Get-SharingPolicy
Name Domains Enabled Default
Default Sharing Policy {*:CalendarSharingFreeBusySimple} True False
Lxxx {lxxx.com:CalendarSharingFreeBusy... True True
added my mail box to sharing policy but in the end receive same error
Calendar sharing is not available with the following contacts because of permission settings on your network.
In EventViewer everything seems to be fine....
No errors on policy creation... How can be checked this permission
settings on your network they are on exchange on in DC ? -
Database mailbox grow quickly Exchange 2010 SP3
Hello.
Since we migrated from Exchange 2003 to
2010, the growth of our databse mailbox
is excessive. We have a total mailbox
size hovering around 75 GB and the size of
the database is 120 Gb.
Mailbox quotas are very
limited and 90% of users move emails
from mailbox to PST personal folders.
I get the impression that the space freed by removing
emails or move them to PST
is not claimed as White Space
and hence the excessive growth of
the DB.
I have seen that there is a fix to solve this
problem for versions prior to Exchange 2010
SP3 but the current version we have
implemented and it is with SP3.
Any idea to find out what is happening and
how to fix it?
Thanks in advance and best regards.
tzariksiHi.
I have reviewed the total size the mailboxes
and Dumpster with the following command:
Get-MailboxDatabase"MailboxDatabase"|Get-MailboxStatistics|SortTotalItemSize-desc|ftdisplayname,TotalItemSize,itemcount,TotalDeletedItemSize
The result is:
•Total Mailbox size(GB)->82,213
•Total Dumpster size(GB)->14,531
•Total ->97,344
The size of the DB using the command:
Get-MailboxDatabase-Status|Sort-ObjectDatabaseSize-Descending|Format-Table
Name,DatabaseSize,AvailableNewMailboxSpace
Is as follows:
Name
DatabaseSize AvailableNewMailboxSpace
MailboxDatabase 107.4 GB (115,302,531,072 bytes) 1.438 GB (1,544,486,912 bytes)
The actual disk size occupied
by the MailboxDatabase is->112GB
What else may be using the space in theMailboxDatabase?.
Thanks and regards.
Pedro.
tzariksi -
Exchange 2010 SP3 upgrade on Windows Server Standard SP2
I'm midway through the swing upgrade process of migrating from Exchange 2003 - Exchange 2010 to Exchange 2013. Everything has gone smoothly between the Exchange 2003 and Exchange 2010 migration which I started two days ago. it has been running
great. I am beginning the final stages of moving from the Exchange 2010 server to a new Exchange 2013 server, but it requires my Exchange 2010 server to be upgraded to SP3. I am now trying to install Exchange Server 2013 SP3 Upgrade and I'm
getting (3) Client Access Role Prerequisites errors. Finding any of these HotFixes and patches is frustrating, because any link provided does not work. It has gotten me nowhere. Here is my Readiness Checks:
Summary: 6 item(s). 5 succeeded, 1 failed.
Elapsed time: 00:01:06
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Organization Prerequisites
Completed
Elapsed Time: 00:00:08
Languages Prerequisites
Completed
Elapsed Time: 00:00:02
Hub Transport Role Prerequisites
Completed
Elapsed Time: 00:00:15
Client Access Role Prerequisites
Failed
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http:// code.msdn.microsoft.com/KB982867.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Install hotfix Microsoft Knowledge Base article 979917 from http:// code.msdn.microsoft.com/KB979917.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http:// go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http:// go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c
Elapsed Time: 00:00:15
Mailbox Role Prerequisites
Completed
Warning:
Multi-mailbox search of on-premises and Office 365 mailboxes in a hybrid configuration requires installation of the update mentioned in Microsoft Knowledge Base article 982867 (http:// code.msdn.microsoft.com/KB982867).
Elapsed Time: 00:00:24
I put a space between the http://" space "URL so I could display the links.
Any help/guidance suggestions would be greatly appreciated.
ChrisI just got these two to go away:
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http:// code.msdn.microsoft.com/KB982867.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http:// go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http:// go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c
still have this one outstanding:
Error:
Install hotfix Microsoft Knowledge Base article 979917 from http:// code.msdn.microsoft.com/KB979917.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
I have tried the FIX: WCF services that are hosted by NLB computers to route messages to Exchange Server fail when WebHeader settings are added by using a .NET Framework 3.5 SP1 application
Windows6.0-KB2637518-x64.msu
when I run it, it tells me "The Update does not apply to your system. So im thinking I need to remove the .NET Framework 4 Client Profile and the .NET Framework 4 Extended. reboot, then install
Windows6.0-KB2637518-x64.msu and then reinstall .NET Framework 4 Client Profile and the .NET Framework 4 Extended
this has taken a day or so to figure out the order of dependencies and the order to put them on.
Frustrating, since I won't be using Exchange 2010, were moving all the way to Exchange 2013 on a brand new server.
Chris -
We are currently running Small Business Server 2003 with Exchange 2003 SP2 and are migrating to Server 2008 R2 with Exchange 2010 SP3 as an interim before moving to Server 2012 R2 with Exchange 2013 SP1. The mailbox move reaches 95% before failing with the
message "Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=78]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetPropsSpecific [7]
Lid: 21921 StoreEc: 0x40380
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=45]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetReceiveFolderTable [104]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=69]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetAllPerUserLtids [125]
Lid: 17082 ROP Error: 0xFFFFFA84
Lid: 29793
Lid: 21921 StoreEc: 0xFFFFFA84
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFFA84
Lid: 25738
Lid: 18570 StoreEc: 0xFFFFFA84
Lid: 23370 StoreEc: 0xFFFFFA84
Lid: 24302
Lid: 32494 StoreEc: 0xFFFFFA84
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source"
This is happening on every mailbox we attempt to move. Any help would be appreciatedThanks for responding
I'm already using BadItemLimit of 50. The largest corrupt message that was skipped is 10.
We're on Small Business Server Standard Edition which only permits one mailbox store. I should mention that the interim machine (where Exchange 2010 is installed) is a Hyper V virtual machine
Here is the entire message from the log:
11/28/2014 7:18:07 PM [VRTL-SVR2008] 'PeacePresbyterianChurch.local/MyBusiness/Users/SBSUsers/Dev Mathura' created move request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] The Microsoft Exchange Mailbox Replication service 'VRTL-SVR2008.PeacePresbyterianChurch.local' (14.3.123.2 caps:07) is examining the request.
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to target mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'Mailbox Database 0224662151', Mailbox server 'VRTL-SVR2008.PeacePresbyterianChurch.local' Version 14.3 (Build 123.0).
11/28/2014 7:18:27 PM [VRTL-SVR2008] Connected to source mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)', database 'PEACE-SERVER\First Storage Group\Mailbox Store (PEACE-SERVER)', Mailbox server 'peace-server.PeacePresbyterianChurch.local' Version
6.0 (Build 7654.0).
11/28/2014 7:18:38 PM [VRTL-SVR2008] Request processing started.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Mailbox signature will not be preserved for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)'. Outlook clients will need to restart to access the moved mailbox.
11/28/2014 7:18:38 PM [VRTL-SVR2008] Source mailbox information before the move:
Regular Items: 20, 1.906 MB (1,998,818 bytes)
Regular Deleted Items: 3, 7.803 KB (7,990 bytes)
FAI Items: 20, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
11/28/2014 7:18:39 PM [VRTL-SVR2008] Initializing folder hierarchy in mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Folder hierarchy initialized for mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)': 31 folders total.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CreatingInitialSyncCheckpoint. Percent complete: 15.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: LoadingMessages. Percent complete: 20.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Mailbox 'Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)' contains 3 soft-deleted items (7.803 KB (7,990 bytes)). They won't be migrated.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Stage: CopyingMessages. Percent complete: 25.
11/28/2014 7:18:40 PM [VRTL-SVR2008] Copy progress: 0/38 messages, 0 B (0 bytes)/1.906 MB (1,998,550 bytes).
11/28/2014 7:18:41 PM [VRTL-SVR2008] Messages have been enumerated successfully. 38 items loaded. Total size: 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:43 PM [VRTL-SVR2008] Initial seeding completed, 38 items copied, total size 1.906 MB (1,998,550 bytes).
11/28/2014 7:18:44 PM [VRTL-SVR2008] Final sync has started.
11/28/2014 7:18:45 PM [VRTL-SVR2008] Stage: FinalIncrementalSync. Percent complete: 95.
11/28/2014 7:18:46 PM [VRTL-SVR2008] Fatal error MapiExceptionJetErrorIndexNotFound has occurred.
Error details: MapiExceptionJetErrorIndexNotFound: Unable to copy to target. (hr=0x80004005, ec=-1404)
Diagnostic context:
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=78]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=75][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetPropsSpecific [7]
Lid: 21921 StoreEc: 0x40380
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=45]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=140][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetReceiveFolderTable [104]
Lid: 31418 --- ROP Parse Done ---
Lid: 45095 EMSMDB.EcDoRpcExt2 called [length=69]
Lid: 61479 EMSMDB.EcDoRpcExt2 returned [ec=0x0][length=48][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetAllPerUserLtids [125]
Lid: 17082 ROP Error: 0xFFFFFA84
Lid: 29793
Lid: 21921 StoreEc: 0xFFFFFA84
Lid: 31418 --- ROP Parse Done ---
Lid: 22753
Lid: 21817 ROP Failure: 0xFFFFFA84
Lid: 25738
Lid: 18570 StoreEc: 0xFFFFFA84
Lid: 23370 StoreEc: 0xFFFFFA84
Lid: 24302
Lid: 32494 StoreEc: 0xFFFFFA84
at Microsoft.Mapi.MapiExceptionHelper.ThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, SafeExInterfaceHandle iUnknown, Exception innerException)
at Microsoft.Mapi.MapiUnk.ThrowIfErrorOrWarning(String message, Int32 hr)
at Microsoft.Mapi.MapiProp.CopyTo(MapiProp destProp, Boolean reportProgress, CopyPropertiesFlags copyPropertiesFlags, Boolean copySubObjects, ICollection`1 excludeTags)
at Microsoft.Mapi.MapiProp.ExportObjectHelper(IMapiFxProxy dest, PropTag[] tags, CopyPropertiesFlags copyPropertiesFlags, Boolean useCopyProps)
at Microsoft.Mapi.MapiProp.ExportObject(IMapiFxProxy fxProxy, CopyPropertiesFlags copyPropertiesFlags, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.LocalSourceMailbox.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy fxProxy, PropTag[] excludeTags)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.<>c__DisplayClass7.<Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo>b__6()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.SourceMailboxWrapper.Microsoft.Exchange.MailboxReplicationService.ISourceMailbox.CopyTo(IFxProxy destMailbox, PropTag[] excludeProps)
at Microsoft.Exchange.MailboxReplicationService.MailboxMover.FinalSyncCopyMailboxData()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.ForeachMailboxContext(MailboxMoverDelegate del)
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.FinalSync(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: ISourceMailbox.CopyTo
OperationSide: Source
Primary (d3391cdd-bc37-41ad-9e44-9f8880c47270)
PropTags: [ContainerHierarchy; ContainerContents]
11/28/2014 7:18:46 PM [VRTL-SVR2008] Relinquishing job. -
Coexistence & Upgrade Exchange 2010 SP3 Unified Messaging to Exchange 2013 SP1 UM
Hello Experts,
We're doing Exchange 2010 SP3 to Exchange 2013 SP1 upgrade.
This upgrade also include Unified Messaging component which is currently working with Exchange 2010 SP3 and Lync 2013.
We have one dial plan and its SIP URI and Secured.
Looking for high level steps to plan coexistence and upgrade of Unified Messaging from Exchange 2010 SP3 to Exchange 2013 SP1 integrated with Lync 2013. I'll also appreciate tips on what kind of certificate and its Subject name(s).
Microsoft documentation is not very clear and I found it confusing for my scenario. Since I we don't want any downtime for UM users, looking for some help.
Thanks in advance for help.
-DKHello Hinte,
Thanks for the information. I have been to this article which explains fresh deployment but doesn't address coexistence and migration scenario.
I'm looking for high level steps only. Can anyone validate and suggest if I'm missing something!
1) Install new CAS+MBX Server
2) Move system mailbox as per MS documentation to Exchange 2013 MBX
3) On CAS+MBX Server Enabled internal CA trusted Cert for UM Services.Internal
CA certs contain only CAS+MBX server's FQDN only.UM services Startup Mode is set to "Dual".
4) Assigned existing SIP URI Based Exchange 2010 Dial plan to New Exchange 2013 Servers.
5) Run Exchucutil.ps1
in Exchange 2013 and OcsUMUtil in Lync 2013 (Again?)
Will this be enough or Do I need to create New Auto attendant or
Haunt Group etc?
Thanks for all the help! -
Exchange 2010 SP3, UR7 after BSOD. Moving mailboxes to new database
Yesterday our Exchange 2010 SP3, UR7 had an BSOD. To recover the services I was forced to do eseutil /p on all DBs.Current status is all DB's are mounted and data are accessible to users. I working on migrating mailboxes to new databases and to remove the old ones.1. I have issue with four move requests that were active during the BSOD. When I try to restart or remove them I end withEMCText--------------------------------------------------------Microsoft Exchange Error--------------------------------------------------------Action 'Remove Move Request' could not be performed on object 'Beňo Michal'.usernameFailedError:Failed to communicate with the mailbox database.MapiExceptionNotFound: Unable to open entry ID. (hr=0x80004005, ec=-1601)Diagnostic context:Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=83]Lid: 43559...
This topic first appeared in the Spiceworks CommunityRegistration is Now Open to Publish on PowerShell GalleryWe are excited to announce that the PowerShell Gallery will accept registration from any users who wish to publish PowerShell modules and share their work with the world.For the past year, the PowerShell Gallery has been slowly adding content from our closest community contributors, most of whom are Most Valuable Professionals (MVPs) and internal Microsoft contributors. While we were building the basic features of the PowerShell Gallery, we restricted the set of people who could publish new modules, and required an approval step before allowing users to register. This approach provided the PowerShell team with an agile feedback loop to help design and to learn what gallery experience will be optimal for the broader PowerShell community.To contribute to the gallery you simply have...
Maybe you are looking for
-
How to use Cross Company Code document number as Reffrence.
Hi Actually user wants to post the same debit credit line items with Editing the amounts which he has posted last month So i suggested him to use post refference of the previous month document number. Since that is Cross company document number. Ther
-
I want the recording of screen for a crm transaction and then from crm transaction i am opening ep and entering data in ep. So how do I record the EP screen. I am recording through shdb. After that I have to write code for data migration. So how to
-
Hello all, I have a Apache SOAP-RPC server running at my end. I have a Java method exposed thru a service. My Soap-RPC works great when I test it using a Java Client. Now I want to call this service using a Visual Basic client. Once I sent the reques
-
SendData() method? where to find reference please?
newb, been going through alot of material, on a new tutorial and the method sendData() is used. I do NOT know how to find information on this here at sun, though I know it exists, sometimes I do a search, search works, other times, just can't find st
-
IMac switches itself off (Shutdown).
Hi all, I have an annoying problem. Every time I turn on my iMac, it switches itself off. I don't know what it is, it doesn't do it all the time, but when it switches itself off and then I turn it back on again, it doesn't happen again. But when I sh