MS Explorer breakdown

I have an applet in my jsp page which works fine.
When I leave the applet and navigate to another page, the MS Explorer will crash in that way that Billy wants to have my message on his desktop (will say: windows asks me to send a report and Explorer exits).
Windows: XP
Explorer: 6.0
All fully equiped with the latest service packs
Java: 1.4.2
Any idea what that could be coursed by?
Thanks for your hints
Klaus

Oh, god... this is a difficult story...
I have uncommented all my own code. Just the elements NB3.6 provides are on the panels. I also commented out all event-code. And with all, I really mean all.
I open the browser with the applet (no special code in the html), klick in a JTextField (not more) and then navigate the browser to another page. Then the browser crashes.
Before I did this action, i switched the logging of the console to TRUE. No output was recorded.
I also now understand to work with the java console and attach the system-info dump. After that you can see that I switched logging on. No entry after that.
Thanks for your patience.
Klaus
Java(TM) Plug-in: Version 1.4.2_05
Verwendung der JRE-Version 1.4.2_05 Java HotSpot(TM) Client VM
Home-Verzeichnis des Benutzers = C:\Dokumente und Einstellungen\kkaal
Proxy-Konfiguration:Kein Proxy
c: Konsolenfenster l�schen
f: Objekte in Finalisierungswarteschlange finalisieren
g: Speicherbereinigung
h: Diese Hilfemeldung anzeigen
l: ClassLoader-Liste ausgeben
m: Speicherbelegung drucken
o: Protokollieren ausl�sen
p: Proxy-Konfiguration neu laden
q: Konsole ausblenden
r: Richtlinien-Konfiguration neu laden
s: Systemeigenschaften ausgeben
t: Threadliste ausgeben
v: Thread-Stack ausgeben
x: ClassLoader-Cache l�schen
0-5: Trace-Stufe auf <n> setzen
Systemeigenschaften ausgeben...
acl.read = +
acl.read.default =
acl.write = +
acl.write.default =
application.home = C:\PROGRA~1\Java\J2RE14~1.2_0
awt.toolkit = sun.awt.windows.WToolkit
browser = sun.plugin
browser.vendor = Sun Microsystems, Inc.
browser.version = 1.1
deployment.javaws.jre.0.enabled = true
deployment.javaws.jre.0.location = http://java.sun.com/products/autodl/j2se
deployment.javaws.jre.0.osarch = x86
deployment.javaws.jre.0.osname = Windows
deployment.javaws.jre.0.path = C:\Programme\Java\j2re1.4.2_05\bin\javaw.exe
deployment.javaws.jre.0.platform = 1.4
deployment.javaws.jre.0.product = 1.4.2_05
deployment.javaws.jre.0.registered = true
deployment.javaws.splash.cache = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten\Sun\Java\Deployment\javaws\cache\splashes\splash.xml
deployment.javaws.version = javaws-1.4.2_05
deployment.javaws.whenInstall = 0
deployment.system.cacerts = C:\PROGRA~1\Java\J2RE14~1.2_0\lib\security\cacerts
deployment.system.home = C:\WINDOWS\Sun\Java\Deployment
deployment.system.jssecacerts = C:\PROGRA~1\Java\J2RE14~1.2_0\lib\security\cacerts
deployment.system.profile = C:\WINDOWS
deployment.system.security.policy = file:/C:/WINDOWS/Sun/Java/Deployment/security/java.policy
deployment.user.cachedir = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten\Sun\Java\Deployment\cache
deployment.user.certs = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten\Sun\Java\Deployment\security\deployment.certs
deployment.user.extdir = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten\Sun\Java\Deployment\ext
deployment.user.home = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten\Sun\Java\Deployment
deployment.user.jssecerts = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten\Sun\Java\Deployment\security\deployment.jssecerts
deployment.user.logdir = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten\Sun\Java\Deployment\log
deployment.user.profile = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten
deployment.user.security.policy = file:/C:/Dokumente%20und%20Einstellungen/kkaal/Anwendungsdaten/Sun/Java/Deployment/security/java.policy
deployment.user.tmpdir = C:\Dokumente und Einstellungen\kkaal\Anwendungsdaten\Sun\Java\Deployment\cache\tmp
file.encoding = Cp1252
file.encoding.pkg = sun.io
file.separator = \
file.separator.applet = true
http.agent = Mozilla/4.0 (Windows XP 5.1)
http.auth.serializeRequests = true
https.protocols = SSLv3,SSLv2Hello
java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment
java.awt.printerjob = sun.awt.windows.WPrinterJob
java.class.path = C:\PROGRA~1\Java\J2RE14~1.2_0\classes
java.class.version = 48.0
java.class.version.applet = true
java.endorsed.dirs = C:\PROGRA~1\Java\J2RE14~1.2_0\lib\endorsed
java.ext.dirs = C:\PROGRA~1\Java\J2RE14~1.2_0\lib\ext
java.home = C:\PROGRA~1\Java\J2RE14~1.2_0
java.io.tmpdir = C:\DOKUME~1\kkaal\LOKALE~1\Temp\
java.library.path = C:\Programme\Internet Explorer;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Programme\Internet Explorer;;C:\j2sdk1.4.2_04\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panelc:\jdk1.5.0\bin;c:\jdk1.5.0\jre\bin;c:\programme\jboss\bin;C:\PROGRA~1\Borland\Delphi6\Bin;C:\PROGRA~1\Borland\Delphi6\Projects\Bpl;C:\PROGRA~1\ULTRAE~1;C:\Programme\UltraEdit10;C:\Programme\Adabas\bin;C:\Programme\Adabas\pgm
java.protocol.handler.pkgs = sun.plugin.net.protocol|sun.plugin.net.protocol
java.runtime.name = Java(TM) 2 Runtime Environment, Standard Edition
java.runtime.version = 1.4.2_05-b04
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.4
java.util.prefs.PreferencesFactory = java.util.prefs.WindowsPreferencesFactory
java.vendor = Sun Microsystems Inc.
java.vendor.applet = true
java.vendor.url = http://java.sun.com/
java.vendor.url.applet = true
java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.4.2_05
java.version.applet = true
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.4.2_05-b04
javaplugin.console = show
javaplugin.exception = true
javaplugin.jre.path = Default
javaplugin.jre.type = Default
javaplugin.maxHeapSize = 96m
javaplugin.nodotversion = 142_05
javaplugin.proxy.config.type = direct
javaplugin.proxy.usebrowsersettings = true
javaplugin.version = 1.4.2_05
javaplugin.vm.options = -Djava.class.path=C:\PROGRA~1\Java\J2RE14~1.2_0\classes -Xbootclasspath/a:C:\PROGRA~1\Java\J2RE14~1.2_0\lib\plugin.jar -Xmx96m -Djavaplugin.maxHeapSize=96m -Xverify:remote -Djavaplugin.version=1.4.2_05 -Djavaplugin.nodotversion=142_05 -Dbrowser=sun.plugin -DtrustProxy=true -Dapplication.home=C:\PROGRA~1\Java\J2RE14~1.2_0 -Djava.protocol.handler.pkgs=sun.plugin.net.protocol
line.separator = \r\n
line.separator.applet = true
os.arch = x86
os.arch.applet = true
os.name = Windows XP
os.name.applet = true
os.version = 5.1
os.version.applet = true
package.restrict.access.netscape = false
package.restrict.access.sun = true
package.restrict.definition.java = true
package.restrict.definition.netscape = true
package.restrict.definition.sun = true
path.separator = ;
path.separator.applet = true
sun.arch.data.model = 32
sun.boot.class.path = C:\PROGRA~1\Java\J2RE14~1.2_0\lib\rt.jar;C:\PROGRA~1\Java\J2RE14~1.2_0\lib\i18n.jar;C:\PROGRA~1\Java\J2RE14~1.2_0\lib\sunrsasign.jar;C:\PROGRA~1\Java\J2RE14~1.2_0\lib\jsse.jar;C:\PROGRA~1\Java\J2RE14~1.2_0\lib\jce.jar;C:\PROGRA~1\Java\J2RE14~1.2_0\lib\charsets.jar;C:\PROGRA~1\Java\J2RE14~1.2_0\classes;C:\PROGRA~1\Java\J2RE14~1.2_0\lib\plugin.jar
sun.boot.library.path = C:\PROGRA~1\Java\J2RE14~1.2_0\bin
sun.cpu.endian = little
sun.cpu.isalist = pentium i486 i386
sun.io.unicode.encoding = UnicodeLittle
sun.java2d.fontpath =
sun.net.client.defaultConnectTimeout = 120000
sun.os.patch.level = Service Pack 2
trustProxy = true
user.country = DE
user.dir = C:\Dokumente und Einstellungen\kkaal\Desktop
user.home = C:\Dokumente und Einstellungen\kkaal
user.language = de
user.name = kkaal
user.timezone = Europe/Berlin
user.variant =
Fertig.
Protokollieren : true .... abgeschlossen.

Similar Messages

Breakdown history report in one t.code

Dear PM Guru's,
i got one requirement from the users, he wants a report such that, in one report he wants to see the Equipment, Breakdown duration, Damage, Cause, Tasks & Activities. i explored all the t.codes which i know in sap, but there its avaialable in different t.codes and the same time user wants graph for each machine and month wise.
Please let me know the any other transaction codes.
regards
jalu

Hi jalupm,
go to tcode IW65>SETTINGS->LAYOUT--->GET. here you will get all your report parameters you need.
Cheers!

What should the windows explorer directory be for the ipod?

i have a 60gig ipod video.
i plugged into a computer in bangkok and i think my ipod music folder and others folders got shuffled around. when i turn on the ipod it shows completely empty, but the memory is still reading correct-50 gigs used, 7 free. I freaked out at first as i have no back up any more. But now i am quite sure that everything is still on there--i just need to move and rename folders and remove the ones inproperly put on there by the bad bad bangkok computer. So, could someone look at their ipod in windows explorer (make sure you are viewing hidden files as well and give me a breakdown of the normal directory tree -- or perhaps there is an online presentation of this.
PLEASE HELP!!

Is this what you want?
Music from iPod to computer (using option 2). This is a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.

Steps for preventive and breakdown maintenance

hey gurus,
i'm a novice in plant maintenance and ve been assigned to take care of PM in the project. can u pls tell me the step by step procedure for carrying out preventive maintenance and breakdown maintenance in sap.
thanks in advance...

Hi Abhi
If you are a end user and u want to know abt the process... then it is simple to explain here...
for Breakdown Maintenance
Creation of notification ( with B/D tick) TCODE : IW21
Which includes functional location, equipment, catalog etc
Creation of order TCODE : IW31
Which Include Operation, work, materials, manpower etc
check whether internal / external labour or material required...
If material internal - do material reservation - Goods issue
If labour internal - Internal work entry
If material External - create PR & PO
If labor external - create PR & PO & service entry sheet
execute the order
confirm the order
for Preventive Maintenance
Create Maintenance Stratergy
Create Maintenance Task List
Create maintenance plan
scheldule the plan
Confirm the order
teco
These are some of the basic requirements for the process...
Rest every thing you should explore yourself...
- pithan

Can not see two fields in Crystal 2008 Developer explorer/designer view

I am currently developing crystal 2008 reports against the salesforce.com database using version 12.0.0.683 CR Developer Full version. I am using an updated driver that was provided in July or Aug 08 in order to view self referencing fields. The problem is that when I try and report against one of the tables (lead history) I cannot view two of the fields (New Value and Old Value)? I can see these two field (New Value and Old Value) in the database expert as the last two fields in the actual table, but the two fields are missing when I go into the explorer/designer view. In Salesforce, these two fields can not be filtered on, but I can export all the values in this table using Salesforece Apex data loader.

Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly

Problem with jinitiator in my internet explorer

I am using Forms and Reports 10g and Database 10g. Installed both successfully.
When i try to run a form(even Test.fmb) , it is not working in internet explorer.... i still could not understand the problem. But, i noticed one thing... either, JInitiator is not installed or it is not invoking automatically when i run the forms... this is the problem.. can someone help me on this please?

I am using Forms and Reports 10g and Database 10g.
Installed both successfully.
When i try to run a form(even Test.fmb) , it is not
working in internet explorer.... i still could not
understand the problem. But, i noticed one thing...
either, JInitiator is not installed or it is not
invoking automatically when i run the forms... this
is the problem.. can someone help me on this please?When you say "it is not working..." what do you mean??
What is the error message raised??
Does the browser crashes??
Keep in mind that to run a form from the forms builder (including test form) you must start the OC4J instance.
Tony

Dism - The directory could not be completely unmounted - process explorer can't find open processes and unmounting fails

Hi all,
Installed WAIK on server 2008 R2 64 bit. I'm setting up some boot images, and am having a real hard time getting drivers to integrate into the driver store in the boot images.
What I'm finding is that when adding drivers to the boot image the gui hangs part way through over 50% of the time using Dell 760 or HP NX9420 drivers extracted to pull out the inf files. It's really flakey and will work after a couple of attempts and when the wind is right.
The main problem is that when the process fails the image is left open, so using dism to list mounted images and then umount the open images is the only way to try again.
However, some images won't unmount and the unmount process displays the following:
C:\Windows\system32>dism /get-mountedwiminfo
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Mounted images:
Mount Dir : C:\Users\davros\AppData\Local\Temp\~$WDSMGMT.000
Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
wim
Image Index : 2
Mounted Read/Write : Yes
Status : Invalid
The operation completed successfully.
C:\Windows\system32>dism /unmount-wim /mountdir:C:\Users\davros\AppData\Local\Te
mp\~$WDSMGMT.000 /discard
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
wim
Image Index : 2
Unmounting image
[==========================100.0%==========================]
Error: 0xc1420117
The directory could not be completely unmounted. This is usually due to applica
tions that still have files opened within the mount directory. Close these file
s and unmount again to complete the unmount process.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Using process explorer shows no running processes that have the files open and the dism.log file shows:
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:75 - CWimImage::Unmount(hr:0xc1420117)
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1068 - CWimManager::InternalOpUnmount(hr:0xc1420117)
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0xc1420117)
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 Error executing command - CWimManager::InternalExecuteCmd(hr:0xc1420117)
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0xc1420117)
2009-12-16 11:49:35, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2009-12-16 11:49:35, Info                  DISM   DISM.EXE:
2009-12-16 11:49:35, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
2009-12-16 11:49:35, Info                  DISM   DISM.EXE:
2009-12-16 11:49:35, Info                  DISM   DISM Image Session: PID=5580 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
Rebooting the server clears the lock, but it's really becoming a joke, as I can create a boot image with the drivers, but then going back into add another driver causes the gui to not respond.
Any suggestions gratefully accepted. - Matt.

Hi all,
had same problem unmounting the wim file using Windows 7 Pro 32bit.
My solution was: Checking for "wrong" Dism.exe
Preparing a WinPE I followed the steps in the help of AIK. I ran the
copype.cmd batch. When it was finished, it said that it added something
to the path environment variable. It was clear that it did so in order
to find the tools needed for the further steps. As long as everything
worked, I didn't give it a second thought. Then I could not unmount the
WIM.
I looked at the PATH variable: NO entry pointed to the directory where
dism.exe was in. (In my case that would have been
     c:\program files\windows aik\tools\x86\servicing
Magically, dism.exe started from everywhere though.
Doing a      dir c:\dism.exe /s /a     showed I had a Dism.exe in
c:\windows\system32, as well. This one has a file size different from
the correct one. Obviously I had started this one (because PATH points
there).
Starting the correct dism.exe let me unmount the WIM without problems.
Regards,
Robert

How can I open just one of my several homepages in the current tab? You can in Internet Explorer but can only open all at once in lots of tabs with Firefox?!?

Within Internet Explorer you can click on a little arrow next to the homepage icon and a dropdown appears with a list of your homepages (I have 5). So if I want to quickly check my facebook or e-mail I can click on it and then on whichever I want to visit (both are homepages). It is much quicker than using bookmarks/typing it in and I don't like the 'permanent tab' feature as I don't want them always open. Does this feature already exist?

You can create a folder with the home pages by using "Bookmark All Tabs" to open a specific page.
You can place that folder on the bookmarks toolbar or use the Bookmarks menu button that you can find in the toolbar palette to get access to that folder easily.
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
* "Bookmark This Page" can be accessed via the right-click context menu of that browser page.

Is there a way to open an existing opar file to just explore the same

Is there a way to open a OPAR file and explore the metadata xml files in them. Does any utility in the EMPDK allow us to do the same?

You can use unzip to extract files from an opar file.
Ex:
unzip <opar file>
Regards,
- Loc

Remote Panel and Internet Explorer

Hello. I have a problem with a Remote Panel and Internet Explorer. I create a measurement system in LabVIEW. It�s composed of a main front panel and a few subVIs with independent front panels opened from main Front Panel when I press appropriate button. As a local system everything works ok but I try to create a web version of this system. I decide that I can use a Remote Panel. In Web Publishing Tool I was creating a web page for each of Front Panel. I try to have the same functionality as in local system, so when in Front Panel (opened in Internet Explorer window) I press appropriate button I want to open secondary Internet Explorer window with a subVI inside. And now I�m stuck because I can�t open this secondary window in a network w
orkstation. Has anyone have an idea how can I do it?

> Hello. I have a problem with a Remote Panel and Internet Explorer. I
> create a measurement system in LabVIEW. It?s composed of a main front
> panel and a few subVIs with independent front panels opened from main
> Front Panel when I press appropriate button.
I think you have two options. You can open most modal subVI panels
directly on a remote machine. The popup panels won't be in a web page,
but it will work with few changes.
A second approach would be to change the app slightly. The buttons that
launch the subVIs will turn into URL links. The links will open a web
page with a different embedded panel.
Greg McKaskle

While generating a crystal report can we edit database fiels in field explorer (at middle can we edit database fields)

while generating a crystal report can we edit database fiels in field explorer (at middle can we edit database fields)

Wrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT

While generating a crystal report can we edit database files in field explorer ?

Hi,
while generating a crystal report can we edit database files in field explorer (at middle can we edit database fields)
Regards,
Mahendra

Wrong forum to post the question, try to post the question in crystal reports community.
Its not possible to edit the database fields while creating the reports, its only used to call the rows of values in it. Can you explain me in detail what are you actually looking for .
--SumanT

Ipod isn't recognized by windows 7 explorer or itunes help!

Okay so it started I was cleaning out my computer in the 'delete programs' section of control panel. I found something called 'asmedia asm104x' it looked rather
suspicious so I deleted it. After that my ipod just suddenly stopped charging from Itunes so I was like "ok thats weird." I looked at itunes and it wasn't found then I looked on Windows explorer and it wasn't there either so then I just thought "Ok I'll restart and see what happens." so I did that and as soon as my computer rebooted my ipod was charging so I felt relieved and then when it got to the windows logo during start up it just stopped charging. So I looked into the issue and checked a bunch of things, I ran diagnostics I tested the cable and usb ports etc... it was all fine I even tested it on my Asus touch screen lap top and it charged there so I looked further into it and narrowed it down to uninstalling Itunes so I did that. TWICE. I cleared everything; I looked all around my computer for itunes related stuff and I'm am 100% sure I deleted EVERYTHING to do with Apple. Then I installed it and Itunes for the second time I opened it everything was still there. I'm really frustrated and I have already looked at almost all the threads about this subject yet they all link back to the one tutorial on how to fix it so please don't just link me to one of the apple tutorials with no information. I want to know whats going and how I can fix it, please tell me if I need this 'asmedia' program and if so what version or whatever. Please help me I am rather desperate.

Googling shows that the "program" is the driver for the USB host controller on your computer.
If y have a ASUS motherboard then:
http://www.driversguru.com/manufacturer/ASUS-tag-USB
http://support.asus.com/download.aspx?SLanguage=en&m=Z9PE-D8+WS&os=29

Ipod not recognized by itunes or explorer (windows)

Hello,
My iPod is not being recognized by iTunes or internet explorer. It used to, but not anymore. It just dosent show up when I connect it to my computer. Also, the "do no disconnect" sign does not appear on my iPod when I connect it. It is still able to recharge, though.
I read that I have to restore it. I have tons of songs in my iPod that I do NOT want erased! How can I back these songs up? I have some songs on my iPod that are from another person's computer, so if they get erased, the songs are gone forever.
Please help, thanks.

Hello,
My iPod is not being recognized by iTunes or internet
explorer. It used to, but not anymore. It just
dosent show up when I connect it to my computer.
Also, the "do no disconnect" sign does not appear on
my iPod when I connect it. It is still able to
recharge, though.
have u tried a different usb port?
I read that I have to restore it. I have tons of
songs in my iPod that I do NOT want erased! How can
I back these songs up? I have some songs on my iPod
that are from another person's computer, so if they
get erased, the songs are gone forever.
try this http://www.copypod.net/
Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

Hello and good afternoon, my IPod Touch is neither in windows explorer nor in iTunes to be seen. When I turn my IPod on, i shall connect it to my computer; but when I do so, nothing happens. What can I do, please ???

Hello and good afternoon, my IPod Touch is neither in windows explorer nor in iTunes to be seen. When I turn my IPod on, i shall connect it to my computer; but when I do so, nothing happens. What can I do, please ???

Take a look at the troubleshooting steps provided by Apple in this support article:
http://support.apple.com/kb/TS1538
Hope those help.
Your iPod touch will never appear in Windows Explorer, by the way. It doesn't have the "disk mode" that the older iPods did.
Regards.

MS Explorer breakdown

Similar Messages

Maybe you are looking for