MS homeserver 2011 connector error in Win 8.1 Update 1

Had dificulty in installing win 8.1 Update 1, which required the OS rebuild. The Win Homerserver 2011 connect program fails to install. Error message includes “…either another software installation is in progress, or, the computer has a restart pending.” I have been checking all possible Microsoft solutions without finding any that worked.
I have just searched the registry for RebootRequired and found the following location: \HKEY_LOCAL_MACHINE\SOFTWARE\Lenovo\Lenovo Settings Installer Manager, which has a RebootRequired listed. The system has been rebooted a large number of times.
RebootRequired REG_DWORD 0x00000000 (0)
There is a sub-key \Common that has the following
SystemRebooted REG_DWORD 0x00000000 (1)
This T440s is the only Lenovo system (out of 4) that has these keys. Is this the source of my problem and can I safely remove them from the registry? Thanks

Similar Messages

W530 error report: Win 7 pro updates installation failure

I downloaded and installed the updates via Windows Updates.
After downloading, the system informed me to restart the computer to finish update, so I did.
But when the system rebooted and the configuring process came to 15%, it turns out failure in configuring my computer and revert changing. Then the computer restart again and load without installing those updates.
Now the system is informing me to restart again and again everytime when I enter the system.
I wonder if there is anyone could solve it.
Solved!
Go to Solution.

'afternoon.
is KB2647753 one of the updates you're trying to install? if so, try installing it first, all by itself, nothing else selected in windows update. once done, including any needed reboot, try installing the remaining updates.
please do let us know if this works for you.
cheers.
edit - reference this thread: http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/x230-problem-with-windows-updates-system-confi... towards the bottom of page 1 and the top of page 2.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Crystal Report throws Unexpected Database Connector error

Hi, 
 
We are using Crystal report 2008 CR4E API to implement the crystal report in our application. We use the below code to reset the report data source with our application data source. It works fine for most of the simple queries. But if the query contains any function defined in the SELECT Clause it throws Unexpected Database Connector error. As per the log and analysis we believe the root cause of the exception is it consider that function as column in the table and throws the SQL Exception that "function is Invalid Identifier". Could you please help in resolving this issue?
 
Code: 
 Tables tables = clientDoc.getDatabaseController().getDatabase().getTables(); 
 for(int i = 0;i < tables.size();i++){ 
 origTable = tables.getTable(i); 
 if (tableName == null || origTable.getName().equals(tableName)) { 
 newTable = (ITable)origTable.clone(true); 
 newTable.setQualifiedName(origTable.getAlias()); 
 connectionInfo = newTable.getConnectionInfo(); 
 propertyBag = new PropertyBag(); 
 propertyBag.put("Trusted_Connection", params.trustedCon); 
 propertyBag.put("Server Type", params.serverType); 
 propertyBag.put("Use JDBC", params.useJdbc); 
 propertyBag.put("Database DLL",params.databaseDLL); 
 propertyBag.put("Connection URL", params.connectionURL); 
 propertyBag.put("Database Class Name", params.dbClassName); 
 connectionInfo.setAttributes(propertyBag); 
 connectionInfo.setUserName(params.userName); 
 connectionInfo.setPassword(params.password); 
 clientDoc.getDatabaseController().setTableLocation(origTable, newTable); // Exception is thrown here 
 } 
 } 
 
SQL Query : 
Select empno, Fun_getEmpAddress(empno) from employee where empno = ? 
Error Log: 
2011-04-26 16:30:41.926 89022900 CrystalReportParms_jsp._jspService(368) Error while generating crystal report 
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected database connector error---- Error code:-2147467259 Error code name:failed 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2285) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2305) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:737) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527) 
 at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352) 
 at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54) 
 at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67) 
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716) 
 at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125) 
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537) 
 at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186) 
 at com.crystaldecisions.sdk.occa.report.application.an.a(SourceFile:108) 
 at com.crystaldecisions.sdk.occa.report.application.b0.if(SourceFile:148) 
 at com.crystaldecisions.sdk.occa.report.application.b0.b(SourceFile:95) 
 at com.crystaldecisions.sdk.occa.report.application.bb.int(SourceFile:96) 
 at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(SourceFile:151) 
 at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(SourceFile:106) 
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:2159) 
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:543) 
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:3898) 
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(SourceFile:2906) 
 at com.mysystems.myapp.common.CRJavaHelper.changeDataSource(CRJavaHelper.java:157) 
 at com.mysystems.myapp.common.CrystalReport.print(CrystalReport.java:202) 
 at org.apache.jsp.english.CrystalReportParms_jsp._jspService(CrystalReportParms_jsp.java:368) 
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70) 
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) 
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377) 
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313) 
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260) 
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) 
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) 
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) 
 at com.mysystems.myapp.common.MyServletFilter.doFilter(MyServletFilter.java:107) 
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) 
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) 
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) 
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) 
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) 
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) 
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) 
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298) 
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:857) 
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588) 
 at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489) 
 at java.lang.Thread.run(Thread.java:595) 
Caused by: com.crystaldecisions.reports.common.QueryEngineException: Unexpected database connector error 
 at com.crystaldecisions.reports.queryengine.Connection.bf(SourceFile:2958) 
 at com.crystaldecisions.reports.queryengine.Rowset.z3(SourceFile:944) 
 at com.crystaldecisions.reports.queryengine.Rowset.bL(SourceFile:533) 
 at com.crystaldecisions.reports.queryengine.Rowset.zM(SourceFile:245) 
 at com.crystaldecisions.reports.queryengine.Connection.a(SourceFile:776) 
 at com.crystaldecisions.reports.queryengine.Table.a(SourceFile:2234) 
 at com.crystaldecisions.reports.queryengine.Table.if(SourceFile:2161) 
 at com.crystaldecisions.reports.queryengine.Table.try(SourceFile:1525) 
 at com.crystaldecisions.reports.queryengine.Table.a(SourceFile:568) 
 at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2405) 
 at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529) 
 at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71) 
 at com.crystaldecisions.reports.common.Document.a(SourceFile:203) 
 at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175) 
 at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1167) 
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661) 
 ... 47 more 
Caused by: com.businessobjects.reports.jdbinterface.common.DBException: Unexpected database connector error 
 at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCQueryDefinition.Execute(Unknown Source) 
 at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCQueryDefinition.Execute(Unknown Source) 
 at com.crystaldecisions.reports.queryengine.Connection.bf(SourceFile:2953) 
 ... 63 more 
Caused by: java.sql.SQLException: ORA-00904: "Fun_getEmpAddress": invalid identifier 
 
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124) 
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304) 
 at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271) 
 at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:622) 
 at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:111) 
 at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:350) 
 at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:895) 
 at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:382) 
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:985) 
 at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1515) 
 ... 66 more 

i'm also getting the same error when i'm trying to call stored procedure (that will fetch the result set and populate the report) through the query in the report-viewer.jsp. The result set is fetched i.e. when i print the result set it shows on tomcat but it is not getting passed to Table object to populate the report. However when i try to give the query explicitly in the form of SELECT statements, it works fine i.e. i can view the report in the browser. But giving query in the form of SELECT is a very naive way and is ok if u have too less reports not requiring too many joins, thats why i was using stored procedure. Any help would be appreciated.

Unexpected database connector error when upgraded to the JRC 12.2.209

Hi all,
my reports were working fine when using the Java Reporting component version 11.8.4.1094 within a web application.
I upgraded to JRC version 12.2.209.1094 Since then I am getting the following exception:
16:44:33,546 ERROR [JRCCommunicationAdapter] detected an exception: Unexpected database connector error
 at com.crystaldecisions.reports.datafoundation.DFQuery.for(SourceFile:632)
 at com.crystaldecisions.reports.datalayer.a.do(SourceFile:1621)
 at com.crystaldecisions.reports.datalayer.a.a(SourceFile:1404)
 at com.crystaldecisions.reports.dataengine.m.b(SourceFile:334)
 at com.crystaldecisions.reports.dataengine.j.b(SourceFile:515)
 at com.crystaldecisions.reports.dataengine.m.o(SourceFile:408)
 at com.crystaldecisions.reports.dataengine.m.a(SourceFile:173)
 at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:114)
 at com.crystaldecisions.reports.dataengine.ContextNode.a(SourceFile:95)
 at com.crystaldecisions.reports.dataengine.j.case(SourceFile:1080)
 at com.crystaldecisions.reports.dataengine.h.<init>(SourceFile:108)
 at com.crystaldecisions.reports.dataengine.DataContext.a(SourceFile:254)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4660)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:4574)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.new(SourceFile:2652)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.byte(SourceFile:2610)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.try(SourceFile:2282)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.int(SourceFile:2442)
 at com.crystaldecisions.reports.dataengine.DataProcessor2.I(SourceFile:1013)
 at com.crystaldecisions.reports.formatter.formatter.objectformatter.ObjectFormatter.fo(SourceFile:526)
 at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.if(SourceFile:613)
 at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.a(SourceFile:578)
 at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.X(SourceFile:387)
 at com.crystaldecisions.reports.formatter.formatter.paginator.PageFormatter.moveToPageN(SourceFile:339)
 at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:78)
 at com.crystaldecisions.reports.formatter.export2.a.a(SourceFile:247)
 at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.if(SourceFile:642)
 at com.crystaldecisions.reports.formatter.export2.ExportSupervisorEx.a(SourceFile:586)
 at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.a(SourceFile:636)
 at com.businessobjects.reports.sdk.requesthandler.ReportViewingRequestHandler.int(SourceFile:672)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1944)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
 at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
 at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
 at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
 at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
 at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
 at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:1558)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(SourceFile:337)
 at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(SourceFile:286)
 at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(SourceFile:209)
 at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(SourceFile:249)
 at com.businessobjects.report.web.event.bh.a(SourceFile:158)
 at com.businessobjects.report.web.event.o.a(SourceFile:146)
 at com.businessobjects.report.web.event.bw.broadcast(SourceFile:93)
 at com.businessobjects.report.web.event.am.a(SourceFile:53)
 at com.businessobjects.report.web.a.t.if(SourceFile:2104)
 at com.businessobjects.report.web.e.a(SourceFile:300)
 at com.businessobjects.report.web.e.a(SourceFile:202)
 at com.businessobjects.report.web.e.a(SourceFile:135)
 at com.crystaldecisions.report.web.ServerControl.a(SourceFile:607)
 at com.crystaldecisions.report.web.viewer.ReportExportControl.a(SourceFile:124)
 at com.crystaldecisions.report.web.ServerControl.a(SourceFile:131)
 at com.crystaldecisions.report.web.ServerControl.getHtmlContent(SourceFile:119)
 at it.xxxx.xxx.servlet.xxxx.xxxx.xxxxx(xxxxx.java:338)
16:44:33,656 ERROR [STDERR] Caused by: java.sql.SQLException: ORA-00936: missing expression
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:74)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:131)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:204)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:693)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:617)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.T2CStatement.executeForDescribe(T2CStatement.java:766)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1077)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1770)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1739)
16:44:33,656 ERROR [STDERR] at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:299)
16:44:33,656 ERROR [STDERR] at org.jboss.resource.adapter.jdbc.WrappedStatement.execute(WrappedStatement.java:91)
16:44:33,656 ERROR [STDERR] ... 99 more
From the Eclipse's console I recovered the query being executed and I have noticed that in the query missing one parameter and some parameters are set up incorrectly to zero. With the old version the parameters were passed correctly to the query and the reports work fine.
Please help. Thanks!
Edited by: Francesco83 on Jan 13, 2011 5:27 PM
Edited by: Francesco83 on Jan 13, 2011 5:29 PM
Edited by: Francesco83 on Jan 14, 2011 12:57 PM

I find in the SAP notes that this is a reported bug in the JRC application.
SAP Note 1416845 - JRC application throws "Unexpected database connector" error
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433313336333833343335%7D.do
My question is - Does anyone know when is this bug scheduled to be fixed and released?
Thanks,
Travis

CR: Error in File ~tmp2be86bbf9f5e260.rpt: Database Connector Error

dear all, this has finally got the better of me.
i have been successfully scheduling a set of reports each month, until now. they all come back with the following error, each with a different ~tmp.rpt file
Error in File ~tmp2be86bbf9f5e260.rpt: Database Connector Error
each report communicates with an SAP ECC system. the user is fine, i have even tried my username to connect to sap, and same error occurs.
no runtime errors in sap.
the actual reports can be opened with crystal reports, and refreshed to show data without any problem.
could this be an integration issue. i checked by removing the sap role, and adding it back without any issues.
i have also cloned the CrystalReportsJobServer and tried to schedule with this one, same thing happens
here are the instance details
Title: Inv Count Cars
Document Type: Crystal Report
Status Failed
External Destination: None
Owner: ABC~400/GSMITH
Server Used: ABSAP02.CrystalReportsJobServer
PID: 11240
Folder Path: Reports/
Remote Instance: No
Creation Time: 1/09/2011 14:59
Expiry: 1/09/2021 14:59
Start Time: 1/09/2011 14:59
End Time: 1/09/2011 14:59
Printer: None
Formats: Crystal Reports
Parameters: null; chrysler
Error Message: Error in File ~tmp2be86bbf9f5e260.rpt: Database Connector Error
could this be an integration ?
i would very much appreciate anyones help
thanks
g
Edited by: Glen Spalding on Sep 1, 2011 7:27 AM

all servers up and running without any problems
ODBC database connection works fine
here a list i have made, so i can remember what i have done
the issue is on the production box, and the dev box works fine.
1. checked sap user, ok
2. checked individual reports, ok
3. checked dev environment, ok
4. checked production IFRS & OFRS, ok
5. checked production report on dev environment, ok
6. checked working dev report on production environment, failed
7. u201Crepairu201D of installation kit
8. CRYSTALREPORTJBBSERVER failing
9. cloned server, server failed
10. tried rogue sap user/password on dev environment, returned different error
11. bounced production, same problem, failed
12. checked OBDC connection
13. checked new SIA with new Job Server, still same thing, failed
14. No Windows Events
15. SAP note raised (0000724225 2011)
16. BOBI Server Trace files nothing obvious
17. tried with report sample to different backend, and CrystalReportsJobServer, ok
18. brand new crystal reports with different user, failed
19. noticed in trace file error 707 with JobScheduleChild process

Unknown Database connector Error - Crystal Reports 2008 and OLE DB

Hi,
I want to create a report based on OLE DB provider.
Once I Select it from the Database Expert list I get this Error: "Unknown Database Connector Error", and the list is empty.
I am using Crystal Reports 2008 on Win XP SP2.
SQL Server 2005 is installed on the local machine.
If I create a UDL File and double click, I can see all OLE DB Providers on the machine.
What am I missing ?
Thanks,
Yuval.

Hi Friends,
Thank you all for trying to help.
- The installed MDAC version is 2.8 (It comes with XP SP2). I have tried installing it again and it says that it is already installed.
- I am not using a bussiness view. Just the simplest blank report in CR2008. I am not able to start it using OLE DB, once I want to choose a provider - I get the error, before even entering connection details such as username and password.
- I am able to build an ODBC report, but when trying to view it using Crystal Reports Windows Form Viewer (from within a .Net application) I get an error: "Failed to Open The Connection". It happens also with reports built on other machines using OLE DB.
Same report works fine with the same application on different machines and I cannot figure out what is the difference.
I think Something on my machine is not right.
Any suggestions ?
Thanks,
Yuval.

Databse Connector Error: 'HY000:[Oracle][ODBC][Ora]ORA-06550: PLS-00363

Whenever I try to add a database stored procedure in my crystal report using ODBC connection in the 'Set datasource Location' menu, it asks me for the discrete value for the parameters I specified in my stored procedure(Except for the REF cursor). My stored procedure seems to be correct but there seems to be a confusion within my crystal report. Once the values are entered it ends up by showing the following error message and my database source does not get added:
Databse Connector Error: 'HY000:[Oracle][ODBC][Ora]ORA-06550: line 1, column 18:PLS-00363: expression '01/01/2008' cannot be used as an assignment target
ORA-06550: line 1, column 31:PLS-00363: expression '01/01/2010' cannot be used as an assignment target
PL/SQL: Statement ignored
[Database Vendor Code: 6550 ]'
The only difference I am noticing is the REF Cursor is used in the Oracle SP. Whether the Crystal report can't differentiate my cursor or What could be the problem. Please provide me a solution for this
Note: The same is working when I change the database to any SQL
Seems to be the root cause for the problem is the parameters are getting renamed with the name of Stored procedure arguments once we change the database from SQL server to Oracle. Is there any possibilities to avoid this?
Thanks
Antony
Edited by: AntonyGR on Oct 11, 2011 1:32 PM

What is the first arguement in the Oracle SP.Is it REF cusror or something else?
Also which ODBC driver you are using ?
Thanks,
Bilahari

Flash player plugin _12_0_0_77.exe - application error in win 7

How to solve flash player plugin _12_0_0_77.exe - application error in win 7?

You get this when doing what? Is there any additional information in the message?

Database Connector Error in Crystal Reports

Hi,
I have a report which has two sub reports. One of the sub reports use a view to fetch data while the other uses a SP. Now the problem that i am facing is as follows-
The sub-report using the stored procedure fails when i execute the main report but if i first execute the sub report with the SP, and then again run the main report, it works fine.
I tried an ODBC trace to find out why this was failing. When the main report is run for the first time, the sub report was not executed properly. The sub report uses a SP which expects two parameters. So at the first run, only one parameter gets passed to the sub report. however on the second run, the sub report successfully gets both the parameters.
The error that is encountered says:
Database Connector Error: 'HY000:[DataDirect][ODBC Oracle driver][Oracle]ORA-06550: line 1, column 58: PLS-00103: Encountered the symbol ")" when expecting one of the following:
(-+ case mod new not null others <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute for all merge time timestamp interval date......
Could any one please help on this one? I am almost crazy trying to figure this out.
Regards,
Rashmi.

Please re-post if this is still an issue to the Data Connectivity - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

Database connector error:Unexpected when connecting to salesforce in CR2008

ISSUE:: Unable to connect to salesforce in CR2008 as when he tries to select the table in the Database expert he gets an error 'Database connector error: Unexpected' however he is able to connect to salesforce and then select the tables using CR XI R2
Observed Behavior:
- The customer is able to connect to salesforce and then select the tables in CR XI R2 however when he tries to select the table through CR 2008 he gets an error 'Database connector error: Unexpected'.
- He does not have an issue switching Windows accounts. He can log in to Salesforce.com from Crystal Reports XIR2 and 2008 using a SFDC account with restricted access from my Windows account. However, he is not able to log in to SFDC using the system administrator SFDC account in Crystal Reports 2008, but is able to using Crystal Reports XIR2. This applies to the production and sandbox SFDC environment.
- He can update data on all reports using CR2008 if the report was created in CRXIR2. He cannot access any data from reports created with CR2008.
Expected Behavior:
- Should be able to select the tables and create reports based off it.
Steps to reproduce:
- Open Crystal Reports 2008 and then connect to salesforce with the credentials provided by the user i.e.
test.nussbaumer @cit.com.test
crystal2008
token: LxYbugxsVmGpRL1QOVIC2q0e '
This gives an error:
'Logon failed. Details: Unexpected Error; nested exception is java.net.UnknownHostException: www.salesforce.com
What has been done so far:
-Have tried the repair on CR 2008 but didn't help.
- The customer has tried some user credentials for a different user in his SFDC instance and was also able to login. He realized that only the system administrator is not able to login. Customer had sent the sample credentials for a test system administrator profile in his sandbox environment. (test.salesforce.com) , used that on my end to connect however it gave the error :'Logon failed. Details: Unexpected Error; nested exception is java.net.UnknownHostException: www.salesforce.com'
test.nussbaumer @cit.com.test
crystal2008
token: LxYbugxsVmGpRL1QOVIC2q0e
To access the Sandbox, he uses test.salesforce.com as the server when connecting with Cyrstal Reports 2008.
- He reset the password and received the same error. He can access Salesforce.com with CR XI R2, but not with CR2008.
- He set up a new computer with only JDK 1.4 on it, using Windows XP Professional and received the same error. His comments:
( I don't believe that this has anything to do with the JDK version, but rather with the size of the metadata in SFDC. If I login as the administrator, I receive the error in CR2008. However, as mentioned before, if I login as a standard user I am able to use CR2008.)
    We tried resetting the User Security token by follwoing the below steps(A security token is not needed for login as I am using a trusted network by SFDC):
Steps for Resetting a User Security Token:
   1.) To reset your security token, click Setup | My Personal Information | Reset Security Token, and click the Reset Security Token button. The new security token is sent via email to the email address on your Salesforce user record.
   2.) You will need to login by entering your username and then your password + security token (without the +).
- Modified the CRConfig.XML file for the proxy server settings and then tried connecting to pull up the tables however still gave the same error.
Configuration:
Windows XP Professional 5.1.2600 SP2 Build 2600
CRXIR2 - 11.5.9.1076
CR2008 - 12.0.0.683
J2SE Development Kit 1.5.0.60
He is using JDK 1.6 (file: jre1.6.0_05). He tried installing JDK 1.4 and pointing to the file: jre1.4.2_17 but had no success.
Version 3 of the Crystal Reports for Salesforce.com driver
Sandbox environment
Edited by: Komal Prasad on Jun 26, 2008 5:28 PM
Edited by: Komal Prasad on Jun 26, 2008 5:29 PM

Please re-post if this is still an issue to the OnDemand Forum or purchase a case and have a dedicated support engineer work with you directly

Crystal Reports: Unexpected database connector error

Hi experts,
I have a Web Module DC that uses JSP to show Crystal Reports. In my report I use POJO as datasource. The POJO itself is a JPA entity and is located in other EJB Module DC that has dependency with the Web Module DC. At design time everything looks fine and I can retrieve the data I need from other EJB Module with Session Beans but as a result I see the following error: "Unexpected database connector error". The architecture is the following:
SessionBean EJB Module----
|
 >>dependency to >> Web Module DC with Crystal Reports
JPA Entities EJB Module----
|
And in my report as datasource I use entity from the JPA EJB Module. And the source in my jsp is the following:
 Object object = null;
 try {
 Context c = new InitialContext();
 object = c
 .lookup("ejb:/appName=sap.com/slauto_viewer_app, beanName=GeneralBean, interfaceName=com.sap.crs.slautoviewer.beans.GeneralBeanLocal");
 Class clazz = object.getClass();
 try {
 //Open report.
 Method method = getMethod(clazz,
 "getGeneralDataByHostAndID");
 List<General> generals = (List<General>) method
 .invoke(object,
 new Object[] { "localhost", "b", 10 });
 POJOResultSetFactory factory = new POJOResultSetFactory(
 SlAutoGeneral.class);
 POJOResultSet resultSet = factory
 .createResultSet(generals);
 ReportClientDocument reportClientDoc = new ReportClientDocument();
 reportClientDoc.open("CrystalReport1.rpt", 0);
 ITable table = reportClientDoc.getDatabaseController()
 .getDatabase().getTables().getTable(0);
 String tableAlias = table.getAlias();
 reportClientDoc.getDatabaseController().setDataSource(
 resultSet, tableAlias, tableAlias);
 session.setAttribute("reportSource", reportClientDoc
 .getReportSource());
 CrystalReportViewer viewer = new CrystalReportViewer();
 viewer.setOwnPage(true);
 viewer
 .setDocumentViewType(CrDocumentViewTypeEnum.webLayout);
 viewer.setHasDrilldownTabs(false);
 viewer.setDisplayToolbar(false);
 viewer.setPrintMode(CrPrintMode.ACTIVEX);
 Object reportSource = reportClientDoc.getReportSource();
 viewer.setReportSource(reportSource);
 viewer.processHttpRequest(request, response,
 getServletConfig().getServletContext(), null);
 } catch (ReportSDKException ex) {
 out.println(ex);
 } catch (Exception ex) {
 out.println(ex);
 } catch (NamingException e) {
protected Method getMethod(Class clazz, String name) {
 Method[] methods = clazz.getMethods();
 for (int i = 0; i < methods.length; i++) {
 Method method = methods;
 String methodName = method.getName();
 if (methodName.equals(name)) {
 return method;
 return null;
Please tell me what could be wrong
Regards,
Martin
Edited by: musaka on Dec 11, 2009 2:51 PM

Please check the Preview tab for formatting before posting. If People can read the question they may reply. Limit your posts to 1500 characters, then formatting is not lost.

Log4J-Error + Unexpected Database-Connector-Error

Hello!
I am trying to integrate a Report into an existing Java Eclipse-Project usind Crystal Reports for Eclipse.
To do this I am modifying the example program which comes together with the installation. I am trying to pass the data to the report directly via a POJO using the call
CRJavaHelper.passPOJO(...)
Now, when I try to open the report I get the following error:
log4j:WARN No appenders could be found for logger (com.businessobjects.reports.sdk.JRCCommunicationAdapter).
log4j:WARN Please initialize the log4j system properly.
Unerwarteter Datenbank-Connector-Fehler
(The last line would be "Unexpected Database-Connector-Error" in english.)
What am I doing wrong? I included log4j.jar into the build path of the project.
Thanx for your help!
UPDATE: Most errors are sitting 50cm in front of the screen. Dumb error on my side. Fixed it and it's working.
Edited by: QSOTech on May 18, 2009 1:33 PM

Error is fixed.
I created the report in Eclipse and used a Plain Old Java Object (POJO) as datasource. No other Database.
The problem was that the Object wasn't instanciated properly.

ReportClientDocument throws - Unexpected database connector error

Hi,
We are getting a weird exception in Websphere 6.1 server when we try to open a crystal report using ReportClientDocument object. It is throwing an unexpected database connector error when we try to change the datasource of the report. It would be great if some one can help us with the solution.
Code:
ReportClientDocument reportClientDocument = new ReportClientDocument();
reportClientDocument.open(REPORT_NAME, 0);
Tables tables = reportClientDocument.getDatabaseController().getDatabase().getTables();
ITable table = tables.getTable(0);
reportClientDocument.getDatabaseController().setDataSource(resultSet0, tableName0 , tableName0+"_ResultSet");
P.S: The same code works fine in Tomcat 6.0 server.
Exception:
[1/11/11 17:34:10:141 GMT+05:30] 00000037 SystemOut     O Connection logon successfully
[1/11/11 17:34:10:145 GMT+05:30] 00000037 SystemOut     O Rowset restart: moveToStart true
[1/11/11 17:34:10:145 GMT+05:30] 00000037 SystemOut     O Rowset execute
[1/11/11 17:34:10:168 GMT+05:30] 00000037 SystemOut     O detected an exception: Unexpected database connector error
     at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2409)
     at com.crystaldecisions.reports.datafoundation.DataFoundation.a(SourceFile:1234)
     at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.a(SourceFile:344)
     at com.crystaldecisions.reports.dataengine.dfadapter.CheckDatabaseHelper.a(SourceFile:66)
     at com.crystaldecisions.reports.dataengine.datafoundation.CheckDatabaseCommand.new(SourceFile:100)
     at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
     at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
     at com.crystaldecisions.reports.dataengine.VerifyDatabaseCommand.new(SourceFile:76)
     at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
     at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
     at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.a(SourceFile:373)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.if(SourceFile:352)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1291)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
     at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
     at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(SourceFile:605)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(SourceFile:1688)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(SourceFile:2650)
     at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(SourceFile:301)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:962)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:2834)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(SourceFile:2557)
     at com.crystaldecisions.reports.sdk.DatabaseController.setDataSource(SourceFile:87)

It appears that you are trying to pass a resultset to the report, only things i can think of is, either the jar file needed for that type of connection is missing, or maybe the app servers are using different versions of java which causes it to act differently.

Unexpected Database Connector Error - Help please !!

Hi,
I am trying to use stored procedure in the crystal report, that comes bundled with RAD7. The following code I got from http://diamond.businessobjects.com/node/520 for using the stored procedure. I am getting 'UnexpectedQueryEngineError' on JRCCommunicationAdapter when trying to establish data connection to add the stored procedure to the report. I tried the same example above for adding table to the report by modifying 'Procedure' to 'Table' and it worked fine.
I really need to use the stored procedure in the report and get to have this working soon. Immediate help is greatly appreciated.
import java.io.IOException;
import com.crystaldecisions.sdk.occa.report.application.DatabaseController;
import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.ConnectionInfo;
import com.crystaldecisions.sdk.occa.report.data.DBField;
import com.crystaldecisions.sdk.occa.report.data.FieldValueType;
import com.crystaldecisions.sdk.occa.report.data.Fields;
import com.crystaldecisions.sdk.occa.report.data.Table;
import com.crystaldecisions.sdk.occa.report.data.Procedure;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBag;
import com.crystaldecisions.sdk.occa.report.lib.PropertyBagHelper;
import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;
public class AddSampleProcedure {
    public static void main(String[] args) throws ReportSDKException, IOException {
        ReportClientDocument clientDoc = new ReportClientDocument();
        clientDoc.setReportAppServer("inproc:jrc");
        // Open report
        clientDoc.newDocument();
        DatabaseController ctr = clientDoc.getDatabaseController ();
        Procedure table = new Procedure (); //Table table = new Table();
        String tableName = "Welcome"; //tableName = "Product";
        table.setAlias (tableName);
        table.setName (tableName);
        table.setQualifiedName (tableName);
        table.setDescription (tableName);
        /*Fields fields = new Fields ();
        DBField field = new DBField ();
        String fieldName = "product_name";
        field.setDescription (fieldName);
        field.setHeadingText (fieldName);
        field.setName (fieldName);
        field.setType (FieldValueType.stringField);
        field.setLength(255);
        fields.add (field);
        table.setDataFields (fields);*/
        String ServerName = serverName;
        String DatabaseName = dbName;
        String JDBC_URL=jdbcURL;
        String JDBC_Class = "oracle.jdbc.driver.OracleDriver";
        String UserName = userName;
        String Password = password;
        PropertyBag attrs = new PropertyBag();
        attrs.put(PropertyBagHelper.CONNINFO_DATABASE_DLL, "crdb_jdbc.dll");
        attrs.put(PropertyBagHelper.CONNINFO_SERVER_NAME, ServerName);
        attrs.put(PropertyBagHelper.CONNINFO_DATABASE_NAME, DatabaseName);
        attrs.put(PropertyBagHelper.CONNINFO_SERVER_TYPE, "JDBC (JNDI)");
        attrs.put(PropertyBagHelper.CONNINFO_JDBC_DATABASECLASSNAME, JDBC_Class);
        attrs.put(PropertyBagHelper.CONNINFO_JDBC_CONNECTION_URL, JDBC_URL);
        ConnectionInfo info = new ConnectionInfo ();
        info.setAttributes (attrs);
        info.setUserName(UserName);
        info.setPassword(Password);
        table.setConnectionInfo (info);
        ctr.addTable (table, null);
        clientDoc.saveAs("AddProcedure.rpt", "C:/Test", 1);
        System.out.println("Done");
Thanks in advance,
Lakshmi

Hi there,
I havent got any replies on the above exception and I am totally stuck. I thought I can provide more details on 'Unexpected Database Connector Error'. This is the exact place where it fails.
01 May 2008 14:20:17 [main] FATAL com.businessobjects.reports.sdk.JRCCommunicationAdapter - Request failed and JRC Command failed to be undone
01 May 2008 14:20:17 [main] ERROR com.businessobjects.reports.sdk.JRCCommunicationAdapter - JRCAgent1 detected an exception: Unexpected database connector error
     at com.crystaldecisions.reports.queryengine.driverImpl.o.eC(Unknown Source)
     at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
     at com.crystaldecisions.reports.queryengine.ax.if(Unknown Source)
     at com.crystaldecisions.reports.queryengine.bc.byte(Unknown Source)
     at com.crystaldecisions.reports.queryengine.bc.new(Unknown Source)
     at com.crystaldecisions.reports.queryengine.bc.for(Unknown Source)
     at com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Unknown Source)
     at com.crystaldecisions.reports.reportdefinition.datainterface.m.new(Unknown Source)
     at com.crystaldecisions.reports.common.as.a(Unknown Source)
     at com.crystaldecisions.reports.common.ae.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.k.a(Unknown Source)
     at com.businessobjects.reports.sdk.b.w.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ag.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bu.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.bu.void(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.a6.for(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.u.performDo(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.u.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.new(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.addTable(Unknown Source)
Any idea on this exception and how to resolve it ?
Thanks

Unexpected database connector error

Hi Team,
I am trying to do Dynamic database change for Crystal reports and i 'm struggling with the following error. I am following below code listed in the following link
CRJava Modify DB Location
Please help me in resolve this issue. I have been struck up with this from 2 days
The Error Stack Trace is:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected database connector error---- Error code:-2147467259 Error code name:failed
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2284)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2304)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:736)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:166)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:528)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:526)
    at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:524)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:423)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:351)
    at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
    at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
    at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
    at com.crystaldecisions.sdk.occa.report.application.ds.a(SourceFile:186)
    at com.crystaldecisions.sdk.occa.report.application.an.a(SourceFile:108)
    at com.crystaldecisions.sdk.occa.report.application.b0.if(SourceFile:148)
    at com.crystaldecisions.sdk.occa.report.application.b0.b(SourceFile:95)
    at com.crystaldecisions.sdk.occa.report.application.bb.int(SourceFile:96)
    at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(SourceFile:151)
    at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(SourceFile:106)
    at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:2159)
    at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:543)
    at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(SourceFile:3898)
    at com.crystaldecisions.sdk.occa.report.application.DatabaseController.replaceConnection(SourceFile:3865)
    at org.apache.jsp.DynamicDBChange_jsp._jspService(DynamicDBChange_jsp.java:213)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:728)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:728)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:222)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:123)
    at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:502)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:99)
    at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:953)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:408)
    at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1023)
    at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:589)
    at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:310)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.common.QueryEngineException: Unexpected database connector error
    at com.crystaldecisions.reports.queryengine.Table.new(SourceFile:1014)
    at com.crystaldecisions.reports.queryengine.Table.byte(SourceFile:1791)
    at com.crystaldecisions.reports.queryengine.Table.a(SourceFile:638)
    at com.crystaldecisions.reports.queryengine.Table.vc(SourceFile:2419)
    at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
    at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
    at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
    at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
    at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1166)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:660)
    ... 46 more
Caused by: com.businessobjects.reports.jdbinterface.common.DBException: Unexpected database connector error
    at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCQueryDefinition.Execute(Unknown Source)
    at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCQueryDefinition.Execute(Unknown Source)
    at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCTable.GetFields(Unknown Source)
    at com.crystaldecisions.reports.queryengine.Table.new(SourceFile:1010)
    ... 56 more
Caused by: java.sql.SQLException: ORA-01008: not all variables bound
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
    at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
    at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:194)
    at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1000)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
    at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1882)
    at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1847)
    at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:301)
    ... 60 more
Waiting for reply
Thanks
Penchal

Hi Penchal,
What is the backend database? Are you using ODBC or JDBC connectivity for your backend DB engine?
Make sure to have the required jars for your connection type inside your applications lib directory.
Does it happens with all the reports?
What happens if you do not change the datasource, are you able to view reports fine.
As you are using Crystal reports for ecllipse runtime libraries to build your jsp, you would need to post your dicussions in the below forum to get better response.
http://scn.sap.com/community/crystal-reports-for-eclipse
The above space is dedicated for the issues with crystal reports for ecllipse.
Thanks,
Prithvi

MS homeserver 2011 connector error in Win 8.1 Update 1

Similar Messages

Maybe you are looking for