MS Office 2010 SP2 32 Bit installation failing.

Hi All,
I am trying to install MS Office 2010 SP2 32 Bit on Windows Server 2003 SP2, Standard edition. After accepting EULA, its failing with an error 'An error occurred while running detection.' I performed the installation in verbose logging mode and following
errors are part of the log files.
OPatchInstall: Will set the property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' to value 'The expected version of the product was not found on the system.'
OPatchInstall: Will set the property 'PACKAGE.PROMPT.ERROR.WITHKB' to value 'The installation of this package failed. Please see $(PACKAGE.FAILURE.KBARTICLE.URL) for more information.'
OPatchInstall: Setting property 'PACKAGE.PROMPT.DETFAILED' to value 'The detection failed, this can be due to a corrupted installation database.'
OPatchInstall: Setting property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' to value 'There are no products affected by this package installed on this system.'
OPatchInstall: Setting property 'PACKAGE.PROMPT.DETECTIONERROR' to value 'An error occurred while running detection.'
OPatchInstall: Setting property 'PACKAGE.SUCCESS.WITHERRORS' to value 'The installation is complete. However, some updates were not applied (please see the log for additional details).'
OPatchInstall: Property 'SYS.ERROR.CODE' value '0x8007006e'
Please let me know if you have any fixes. Thanks.
Regards, Swapnil Patankar

Hi,
Boot your system in clean boot mode and disable antivirus. Then try to run Windows Updates.
Step 1: Try following the KB article to perform Clean Boot.
How to troubleshoot a problem by performing a clean boot:
http://support.microsoft.com/kb/929135
Note: After you used the clean boot to resolve your problem, reset the computer to start as usual.
Step 2: Disable Antivirus software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you
should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Regards,
Melon Chen
TechNet Community Support

Similar Messages

Multiple Languages editions 32/64 bit of Office 2010 SP2

Hi
In the site https://technet.microsoft.com/subscriptions/securedownloads/default.aspx#searchTerm=&ProductFamilyId=383&Languages=en&PageSize=10&PageIndex=0&FileId=0 , I
find the Multiple Languages editions 32/64 bit (mu_office_2010_sp2_x86_dvd_2803290.iso and mu_office_2010_sp2_x64_dvd_2803291.iso) of Office 2010
SP2. These contain only the full versions of
language packs or these also contain
the Professional Plus edition of
Office 2010 SP2?
Thanks
Bye
Balubeto

Microsoft is retiring the TechNet Subscriptions service and discontinued sales on August 31, 2013. Subscribers with active accounts may continue to access program benefits until their current subscription period concludes.
I'm afraid that we might have no way to activate the Office product from TechNet Subscriptions website anymore.
If you want to get the source of Office, you can find them here:
Comsumer:
http://office.microsoft.com/en-us/products/microsoft-office-2010-backup-FX101853122.aspx
Volume Liscense:
https://www.microsoft.com/licensing/existing-customers/fulfillment.aspx
Tony Chen
TechNet Community Support

BIP Deskotop 11.1.1.6 (32-bit) with Office 2010 (32-bit) on Win 7 64-bit

BIP Deskotop 11.1.1.6 (32-bit)
Office 2010 (32-bit)
Win 7 (64-bit)
The current certification matrix seems to say this is supported, however I am having the following problem:
1. I have an existing RTF template, with data template that works. I have run it to be sure, and can view output and verify.
2. If Iopen that RTF template in BIP Desktop, then remove a field, and then using the field browser ( or insert > field ) add that same field back, or a new one the report will not generate output.
Upload the RTF, and the process will finish with status warning, and it fails during post processing. I look at the Output Post Processor error. edit the RTF template with a text editor and see that instead of putting in a <?YOUR_FIELDNAME?> BIP Desktop has instead inserting something similar to the following: <?ref:xdo0001?>. The only solution I currently have is to manually change these tags, however for large BIP reports this is cumbersome, and unacceptable for a long term solution.
Is there a workaround? or reported bug? I couldn't find anything on MOS for this.
Here's the OPP log, you can see the error points to the "REF" element that was added by BIP:Desktop.
[5/29/12 1:26:38 PM] [8629358:RT6176186] Executing post-processing actions for request 6176186.
[5/29/12 1:26:38 PM] [8629358:RT6176186] Starting XML Publisher post-processing action.
[5/29/12 1:26:38 PM] [8629358:RT6176186]
Template code: XX123XML
Template app: MUTL
Language: en
Territory: US
Output type: RTF
[5/29/12 1:26:39 PM] [8629358:RT6176186] Output file was found but is zero sized - Deleted
[5/29/12 1:26:39 PM] [UNEXPECTED] [8629358:RT6176186] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:611)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:239)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared.
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
     ... 17 more

Solution was to follow: Report Generation Fails Due to oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared [ID 1337111.1]

Office 2010 SP2 deploy several systems

We are deploying Office 2010 Standard thru Group Policy. SP2 i downloaded later so there are a dozen systems already installed office without the SP2. The meaning is to also install the SP2 Office to the machines which have gotton Office 2010 without SP2.
The quistion i have is: how do i deploy SP2 Office update thru GPO to several machines which already got the Office 2010 Standard installed. How to install Updates office thru GPO? This is not a setup file but all MSP files in the SP2?
I have already seen that one can do it by script but how?
freddie

Hi,
Your require could be done via script. I think you need to add some if-else sentences in the script. We could use version number to determine which machines need to install SP2.
The version number of Office 2010 SP2 is greater than or equal to 14.0.7015.1000.
The version number of Office 2010 SP1 is greater than or equal to 14.0.6029.1000 but less than
14.0.7015.1000.
The version number of the original RTM release of Office 2010 (that is, with no service pack) is greater than or equal to
14.0.4763.1000 but less than 14.0.6029.1000.
http://support.microsoft.com/kb/2687455/en-us
If you need more help about writing the script, please post your qusetion to script center forum:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
Here is a sample for "Deploying Office 2010 by using Group Policy computer startup scripts"
setlocal
REM *********************************************************************
REM Environment customization begins here. Modify variables below.
REM *********************************************************************
REM Get ProductName from the Office product's core Setup.xml file, and then add "office14." as a prefix.
set ProductName=Office14.PROPLUS
REM Set DeployServer to a network-accessible location containing the Office source files.
set DeployServer=\\FS\Office2010SourceFiles
REM Set ConfigFile to the configuration file to be used for deployment (required)
set ConfigFile=\\FS\Office2010SourceFiles\ProPlus.WW\config.xml
REM Set LogLocation to a central directory to collect log files.
set LogLocation=\\FS\Office2010LogFiles
REM *********************************************************************
REM Deployment code begins here. Do not modify anything below this line.
REM *********************************************************************
IF NOT "%ProgramFiles(x86)%"=="" (goto ARP64) else (goto ARP86)
REM Operating system is X64. Check for 32 bit Office in emulated Wow6432 uninstall key
:ARP64
reg query HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432NODE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
if NOT %errorlevel%==1 (goto End)
REM Check for 32 and 64 bit versions of Office 2010 in regular uninstall key.(Office 64bit would also appear here on a 64bit OS)
:ARP86
reg query HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
if %errorlevel%==1 (goto DeployOffice) else (goto End)
REM If 1 returned, the product was not found. Run setup here.
:DeployOffice
start /wait %DeployServer%\setup.exe /config %ConfigFile%
echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
REM If 0 or other was returned, the product was found or another error occurred. Do nothing.
:End
Endlocal
More
reference:
http://technet.microsoft.com/en-us/library/ff602181(v=office.14).aspx
Regards,
George Zhao
TechNet Community Support

Detection Rule for Office 2010 SP2 deployment

Hello Everyone,
Could anyone please put me on the right track configuring a Office 2010 SP2 deployment?
The Office 2010 SP2 is a EXE file and not a MSI and I am not sure witch Clause to use as detection method.
Thank you

Use the MSI guid that's found in the proplusww.msi, this file can be found from the Office installation files...

Help with OBDC connection in Windows 7 64bit with Office 2010 32 bit.

Hi,
Many moons ago I wrote an application in Java that configured XP machines after they were sysprep’d and deployed. I am currently migrating all our workstations to Windows 7, and was checking my application still worked and queries the correct registry keys etc.
As it turns out however I don't even get going as I believe the application is unable to connect to the ODBC Microsoft Access Driver in Windows 7 64bit with Office 2010 32 bit. Below is the code I have always used and no longer works. I am hopeful that someone can tell me how to modify the command to work on Windows 7 64bit. If I browse to C:\Windows\SysWow64\OBDCad32.exe all the drivers I need are there I think, but if I open OBDC from Administrative Tools the Drivers tab is empty but for SQL. Anyway I will shut up and below is the code I used to use:
     public IOMakeConnection()
     dm = new DisplayMessage();
     ioed = new IOEncryptDecrypt();
     url = "jdbc:odbc:DRIVER=Microsoft Access Driver (*.mdb);DBQ=" + getPath() + "Config.mdb;Uid=admin;Pwd=password";
          try
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          connection = DriverManager.getConnection( url );
          catch( Exception e )
          system.out.println( "" + e );
          errorObtainingPath();
The exception is always thrown as my little app that requests the database path always loads.
Thanks in advance,
Cheers Kris

Hello again,
Sorry for the delayed response, I have been out of the office for a few days.
I have solved the issue, and as stated above the issue was the way I was launching the application. Below is a summary of the issue and the resolution.
My problem was that in Windows 64bit if you click on ODBC in Administrative Tools the Drivers Tab only includes an SQL Driver, and my code reference a Microsoft Access Driver to query the database. That said however if you browse to C:\Windows\SysWow64 and open obdcab32.exe it opens the 32bit version of ODBC, and the Microsoft Access Driver (*.mdb) is listed.
Basically what I need to do therefore is get my code to access the “32bit” version of ODBC in a Windows 7 64bit environment, so my application was able to read the necessary information from the Access Database associated with it.
I understand that this is not a coding issue directly, but assuming people still use Java to open an Access Database on a Windows 7 64bit OS, this may be of help.
So previously I ran the following command, from the “Target” box in a shortcut to execute the java code:
cmd.exe /C SET CLASSPATH=C:\SCAConfigurationUtility && CD\SCAConfigurationUtility && JAVAW SCAConfigurationUtility
Windows 7 64bit, defaults to the 64bit version of Java, and just seems to plain fail if you only have the 32bit version installed. To overcome this I forced the java executable that I was using to be the 32bit version, and used the system switches available in Java 7 (-cp does not appear to be available in Java 6)
So my Shortcut now has this in the “Target” box:
java.exe -d32 -cp C:\SCAConfigurationUtility SCAConfigurationUtility
And this in the “Start in” box:
"C:\Program Files (x86)\Java\jre7\bin"
Or by using the target below the same shortcut works in XP
"C:\Program Files\Java\jre7\bin"
Thanks for all the help,
Regards Kris.

Firefox 4 is not playing well with Microsoft Office 2010 32-bit on my Windows 7 64-bit laptop.

Since I loaded Office 2010 Firefox 4 has been acting up. Sometimes you can click on a FF4 window and it will not activate. Other times, when you are trying to select an item from a listbox, you can not select it. The listbox closes without anything being selected. FF4 worked fine until I installed Office 2010 32-bit. (from the HUP program so the price was right.) IE9 seems to work fine.

Hi ITBobby85,
If the excel version in the Connection Manager is Microsoft Excel 2010 (.xlsx), we should use Microsoft.ACE.OLEDB provider.
We can't install 32bit and 64bit parts of office on the same machine. We will get an error as you said when we run the installer to install the 64bit version of the Microsoft Access Database Engine 2010 Redistributable in the machine where a 32bit version
of Microsoft Office installed. To fix this issue, please download and install the 32bit version of the Microsoft Access Database Engine 2010 Redistributable with the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to uninstall Office 2010 32 bit and install Office 2013 64 bit

Hi Everyone,
I am rather new to SCCM. I have setup a SCCM 2012 SP1 system. I am now trying to setup an Application where it will install Office 2013 64 bit. Everything seemed to go smoothly until I tried testing it. I received an error that I
cannot install the 64 bit version of Office 2013 because Office 2010 32 bit is already installed.
I tried to modify the MSP where it will uninstall Office 2010 before installing Office 2013 but apparently as soon as it starts it checks for the 32 bit installation and exits when it finds it.
Could someone give me a detailed solution (since I am new to SCCM)?
Ken

While referring to older versions of office I think this link may apply: http://social.technet.microsoft.com/Forums/en-US/f255e17d-4e1f-4231-8a88-d63f41c83c52/how-to-automatcally-uninstall-office-2007-32-bit-for-installation-of-office-2010-64-bit?forum=officesetupdeployprevious
Also you might create an office 2010 package, with an uninstall program that removes it.
Then in your office 2013 package make the uninstall for 2010 to be run first.

Excel (Office 2010 64 bit) will not connect to Oracle DB not matter what I try

Hello Everyone,
I started a new role that requires me to interact with an Oracle DB using Excel. Currently I have both the 32 bit and 64 bit Oracle clients installed on my Windows 7 PC.
Firstly I can TNSPing the database I need to connect to, I can also connect using SQLPlus to the desired database, I can even connect using TOAD.
No matter what I try I cannot connect using Excel VBA (Office 2010 64 bit).
The process below used to work for me in a different location, now the objDatabase always is returned "Empty"
Set objSession = CreateObject("OracleInProcServer.XOraSession")
Set objDataBase = objSession.OpenDatabase("database server", "user name/passsword", 0&)
I am not even able to set up a simple ODBC connection working. I get a error "ORA-12557: TNS:protocol adapter not loadable."
When using a ADODB connection I get this error. Run time error '-2147467259 (80004005)':
[Microsoft][ODBC Driver Manager] Data source name not found and default driver specified.
I have place the TNSNames file in both Oracle Home's
I have even reinstalled Office 2010.

Hi,
The 12577 error (12557: TNS:protocol adapter not loadable) is related to Windows Environment or Oracle Home PATH because sqlplus command works smoothly when I execute it inside ORACLE_HOME\bin.
There are two solutions to this issue:
1. Put the Oracle DB Home in front of the other paths in the PATH environment variable.
2. Remove ORACLE_HOME From environment Variable and re-boot PC
http://www.dba-oracle.com/t_ora_12577.htm
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If you have further question about the ADODB, I recommend you post the question to MSDN forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
Regards,
George Zhao
TechNet Community Support

Office 2010 64-bit BPC

Hello Experts,
I am trying to get an offical notification regarding BPC and Office 2010 64-bit. I read somewhere in the forums that there are no plans for this version. Can someone please verify this for me?
Thanks
David

For 7.0 and 7.5 it will not be supported. It will be supported for BPC 10.
Regards
Sorin Radulescu

Office 2010 SP2 no longer can send multiple items to OneNote

Hello,
Since installing Office 2010 SP2 on a number of machines the option to move more than one item to OneNote appears to have been removed. If you select one item you can move to OneNote, select two and the button is greyed out. Is there any way
to restore this functionality.
Thank you,

Thanks for your feedback. We will give you update as soon as possible.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]<o:p></o:p>

Windows 7 - ODBC for Office 2010 64 bit - MS ODBC Driver for Oracle

I am trying to link a table from an oracle rac 10.2.0.4 64 bit install.
I have windows 7 with the oracle 64 bit client.
in odbc i can create a datasource using the oracle driver
and when i try to link a table i get an error :
Reserved error (-7732); there is no message for this error.
I would like to use the Microsoft ODBC for Oracle Driver but it doesnt exist on my computer.
the old one on windows xp used file MSORCL32.DLL is there a MSORCL64.DLL now?
Anyone have any help?
Jeff

Jam The Man's solution worked for me.
>
Here's the solution.
My operating system is Windows 7 64-bit, using Office 2010 64-bit. Trying to connect to an ODBC data source through Excel. The data source is an Oracle9i 32-bit database on a Windows Server 2003 32-bit server. However, the database version or server operating system is arbitrary; it could be an 8i, 9i, 10g, or even an 11g 32-bit or 64-bit database on a UNIX or Windows server. If you're using Windows 7 64-bit and you want to connect to an ODBC data source through Excel to an Oracle database, you must use Office 2010 64-bit. You cannot use Office 2003 or 2007, for example.
Follow these steps on your Windows 7 64-bit PC to connect to your ODBC data source.
1. Through Oracle's web site, go to Instant Client Downloads for Microsoft Windows (x64). Currently, the address to that page is:
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winx64soft.html
2. Download the two following files, found under the version 11.1.0.7.0 heading:
Instant Client Package - Basic (instantclient-basic-win-x86-64-11.1.0.7.0.zip)
Instant Client Package - ODBC (instantclient-odbc-win-x86-64-11.1.0.7.0.zip)
3. Extract both zip files to the same directory (such as c:\oracle\instantclient_11_1).
4. Launch the Command Prompt (DOS command window) by running it as administrator. Go to Start > All Programs > Accessories, then right click Command Prompt and select Run as Administrator.
5. From within the Command Prompt, navigate to c:\oracle\instantclient_11_1, and run odbc_install.exe. You should receive a message saying Oracle ODBC Driver is installed successfully. The name of the new ODBC driver that was just installed is Oracle in instantclient11_1 -- use this driver when creating your ODBC connection.
6. Create a new system environment variable. Set the value of the variable name as TNS_ADMIN, and the value of the variable path as the directory that contains the tnsnames.ora and sqlnet.ora files. On my PC, I have another Oracle client already installed which has its own tnsnames.ora and sqlnet.ora files. Therefore, I set the value of variable path as c:\orant\net80\admin (the directory that contains my tnsnames.ora and sqlnet.ora files). If you don't have another Oracle client installed on your PC, create a new directory such as c:\oracle\instantclient_11_1\network\admin, and place the tnsnames.ora and sqlnet.ora files in that directory. Then, set c:\oracle\instantclient_11_1\network\admin as the value for the variable path.
7. To create the ODBC connection, go Start > Control Panel > Administrative Tools > Data Sources (ODBC). Alternatively, you can create the connection right from within Excel.
Thanks man it worked for me.
My host environment is windows 7 x64 ultimate and I have my oracle 10g in centos installed in VMware.
Previously I had vista home premium x64 there instantclient 10.2 basic and odbc worked but in windows 7 it wasn't working.
Thanks again.

How to automatcally uninstall Office 2007 32 bit for installation of Office 2010 64 bit

I have an MSP that will automatically install my companies 64 bit version of Office 2010 provided Office 2007 32 bit is already uninstalled. However, the option to uninstall previous versions of Office does not work in the MSP. We have Office 2007 32 bit
currently installed and whenever I run the MSP I receive the following: "Setup Error You cannot install the 64 bit version of the Office 2010 because you have 32 bit Office products installed."
Is there a way to automatically remove Office 2007 using the MSP or some other method? Thanks.
Wedgies

What are you creating your MSP with? I'm thinking that because you're calling the Office 64bit setup routine, that one of the first checks it does before it even processes your config.xml file is to check for previous versions installed, and it hits
the 32bit wall and stops. What you should probably do is create a package that has two routines in it. First process the uninstall of Office 2007 32bit, and once that's done process the Office 64 bit installation. You could do this with a
package created by Installshield or Wise and some logic to process Step 1 (Remove Office 32bit) and then upon success of that process Step 2 (Office 64bit Install).
On a different note...is there a business requirement that you have for the 64Bit version of office? If not...I don't think this is all worth the headache, unless you specifically need umpteen million rows of data in Excel, and the machines you're
deploying on have more than 4GB of RAM....just my opinion...
Also, I'm not sure this is a volume activation question though you might get more responses from the Setup and Deployment forum
http://social.technet.microsoft.com/Forums/en-US/officesetupdeploy/threads
Hope this helps,
r/
john
John Wildes | Senior Enterprise Architect | United Airlines | Desktop Engineering

Windows Update of Office 2010 SP2 fails with message Code B56

I have been trying to update a Windows 7 Ultimate + Office 2010 professional with SP2 as supplied both by Windows Update and dowanloaded SP2 from KB2687455.
All attempts fail with a Windows Update error code B56.
I have tried the 'get help with this error' but there is no entry that matches the problem.
I have tracked the event viewer error which is 0x80070643 - this appears to relate to error occurring with .NET, so I am no furrther on.
Help Please from anyone.
Alan Cameron

Thank you for your input. The email prompted me to come back and share what I have been able to do to solve the problem. No answers as to why it worked but what I did was using a dvd with a copy of Office 2010 Professional Plus I started the setup and when
it asked what I wanted to do I answered Repair.
When this was finished I retried the update to SP2 and it worked.
It would be nice to know why it was failing but the pressure is off now.
Alan Cameron

Is it possible to Install the 64-bit Microsoft Access Database Engine 2010 if we are running Microsoft Office 2010 32-bit?

So we are running Microsoft Office Professional Plus 2010, Version 14.0.7015.1000
(32-bit)
This is what is installed via our Network and Network licensing.
I am trying, in vain, to read and write a .xlsx file via a C# Edit Script in a SSIS Package. And I have tried using...
string StringConnection = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + sourceFile + ";Extended Properties=\"Excel 12.0;HDR=Yes;IMEX=1\"";
And this tells me that this has not been installed. So when I go and try and get the Microsoft Access Database Engine 2010 64-bit, which would allow me to use Microsoft.ACE.OLEDB.12.0 and allow me to read, write, and process this .xlsx file, it tells me
I cannot install it because I already have 32-bit installed and it wants me to un-install Microsoft Office 2010. Why? Because it is 32-bit? And I can't do that because this is what we have and what we're licensed for and from what I've read seems to be the
industry standard because most software vendors are ill equipped to process 64-bit right now.
So my question is this...How can I use a C# Edit Script to read and process a .xlsx file? Because if I try using...
string StringConnection = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + sourceFile + ";Extended Properties=\"Excel 8.0;HDR=Yes;IMEX=1\"";
It then tells me that the file is not in that format.
Please excuse me for asking this question in a couple of different ways out here but I cannot for the life of me seem to be able to get an answer as to how I can process a .xlsx file with a C# script and which driver to use that will make this work.
Thanks for your review and am hopeful for a reply.
ITBobbyP85

Hi ITBobby85,
If the excel version in the Connection Manager is Microsoft Excel 2010 (.xlsx), we should use Microsoft.ACE.OLEDB provider.
We can't install 32bit and 64bit parts of office on the same machine. We will get an error as you said when we run the installer to install the 64bit version of the Microsoft Access Database Engine 2010 Redistributable in the machine where a 32bit version
of Microsoft Office installed. To fix this issue, please download and install the 32bit version of the Microsoft Access Database Engine 2010 Redistributable with the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

MS Office 2010 SP2 32 Bit installation failing.

Similar Messages

Maybe you are looking for