MS Office vApp - no printer installed

Hi,
I successfully virtualized my MS Office 2003 App.
The only thing that's going wrong is, no printer is avaliable.
even if there are iprint Printers installed, the Office vApp tells, there is no default printer installed..
so the iprint Printers are not recognized by the vapp.
whats the matter?
Any Ideas.
Thanks in advance....

solved !!!
just delete all the regarding registry keys in the project that points to printers (also the Document imaging writer).
be sure to "merge" the parent keys.

Similar Messages

Office 2010 - "Word cannot print, there is no printer installed"

Hi All,
Been having a problem recently on many PC's at a site where they run Windows 7 x64 with Office 2010 x86.
Printing usually happens with no issue, however sometimes when they click the print icon, (in the 'file-->print' section) it will display 'word cannot print, there is no printer installed'.
The client tells me they can go to control panel and print a test page successfully, but word/excel will not print. In order to resolve the issue they close the program, reopen it and printing works straight away. Today I asked them to restart the print
spooler, instead of closing/reopening word, this did not resolve the issue. closing and reopening did fix the issue.
So far they have experienced the issue with Word and Excel only, however they don't use the other programs a great deal.
The printers are distributed with group policy. In addition to network printers they use PDF Factory (which is like PDF Creator).
I have been unable to reproduce the issue.
Any thoughts would be greatly appreciated, thank you!

Hi,
From your description , I understand that you got message ”word cannot print, there is no printer installed” when clicked the print icon.
If you do not have a default printer, use the Add Printer Wizard to install one.
Follow these steps:
Click Start and then click Devices and Printers.
Under Printer Tasks, click Add a printer, and then follow the instructions to install your default printer driver.
Note If your printer model is not listed in the Manufacturers and Printers lists, see the Hardware
Compatibility List (HCL) for an updated driver. To do this, visit the following Microsoft Web site:
http://www.microsoft.com/whdc/hcl/default.mspx
If your printer is not on the HCL, contact the printer manufacturer for drivers and instructions.
Sincerely,
Harry

HP Office Jet 4630 Printer seems to be installed correctly but doesn't print

I have Windows Vista on my laptop and am trying to install a new HP OJ 4630 e-all-in-one wireless printer. Drivers installed completely. I can see the printer just fine on my network. I can scan from printer to laptop. But I cannot print from this laptop. A print error message will pop up saying that the software cannot see the printer. Is the printer installed?
Using the HP Print and Scan Doctor, a test page will not print, but an internal page will. There seems to be some sort of port config error. Any suggestions? Thanks.

Hi @harleywish
I wonder if the issue might be related to the print spooler rather than a port. Please try bypassing the spooler to see if you can print directly to the printer.
1. Click on start and go to devices and printers.
2. Right click on the printer and click on printer properties.
3. Choose the option "Print directly to the printer".
4. Click apply and then ok.
If this works follow the next steps and try to print again.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
Type services.msc and press Enter
Locate Print Spooler and double click on it to open the Spooler properties
Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
Under Service status, please Stop the server, and then wait a moment and click Start
If bypassing the spooler does not result in a successful print, let me know.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Office jet 6500A printer

i cant use my printer since i upgraded to windows 8 its only a couple of yrs old ... HP Office jet 6500A Plus

Hello,
Please try the below mentioned steps..
Uninstall the existing printer software for "Officejet 6500".
Restart the PC.
Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

What query should I use to find all versions of Office 2013 64-bit installed on client computers?

What query should I use to find all versions of Office 2013 64-bit installed on client computers? Could someone create a custom query? I need all of the client computers names and which ones have any Office 64-bit components. Thank you so much! I really
appreciate it!

Hi,
You could edit the following query to meet your requirement.
SELECT     dbo.v_R_System.Name0, dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System],
                      dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [OS Service Pack], arp.DisplayName0,
                      CASE WHEN arp.version0 LIKE '11.0.6361.0' THEN 'SP1' WHEN arp.version0 LIKE '11.0.7969.0' THEN 'SP2' WHEN arp.version0 LIKE '11.0.8173.0'
THEN 'SP3' WHEN
                       arp.version0 LIKE '12.0.6215.1000' THEN 'SP1' WHEN arp.version0 LIKE '12.0.6425.1000' THEN 'SP2' WHEN arp.version0 LIKE '14.0.6029.1000'
THEN 'SP1' ELSE '' END
                       AS 'Service Pack', arp.Version0
FROM         dbo.v_Add_Remove_Programs AS arp INNER JOIN
                      dbo.v_R_System ON arp.ResourceID = dbo.v_R_System.ResourceID INNER JOIN
                      dbo.v_RA_System_SMSInstalledSites AS ASSG ON dbo.v_R_System.ResourceID = ASSG.ResourceID INNER JOIN
                      dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID
WHERE     (arp.DisplayName0 LIKE '%Microsoft Office%edition%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2010%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office 2000%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office XP%') AND (arp.DisplayName0 NOT LIKE '%update%') AND
                      (arp.DisplayName0 NOT LIKE '%Microsoft Office XP Web Components') AND (dbo.v_R_System.Operating_System_Name_and0 NOT LIKE '%server%')
AND
                      (arp.InstallDate0 NOT LIKE 'NULL')
ORDER BY dbo.v_R_System.Name0, arp.DisplayName0, arp.Version0
Full details:http://social.technet.microsoft.com/Forums/systemcenter/en-US/7baeb348-fb63-4115-8d76-2c884d18f708/sql-query-to-check-ms-office-service-pack-level?forum=configmgrreporting
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can I have the same printer installed multiple times under different names?

On WIndows I have the same printer installed multiple times
All using the same driver
I have a Canon printer that has a rear tray and a bottom tray
So, I will have one printer that prints to the rear and the other to the bottom
Other printers (the same one) will be set so that they print in high quality and in duplex for example
I'll name the printers 1.Canon 2.Canon 3.Canon etc
So, when I go to print, I just hit a number on the keyboard and the printer I want is selected
Can I do the same on my laptop?
Thanks
Omar

Back Up - that's in case things go wrong.
In the case you cite:
You have
Mother
Mother Maiden Name
as Faces, right?
In the Corkboard view click on Mother Maiden Name and delete the 'Maiden Name'.
It will disappear and all the photos will be in the Mother face.
Note that 'Mother' and 'Mother ' (that is, with a trailing space) are not the same.
You can also just edit the name 'Mother Maiden Name' to 'Mother'
As for photos staying in manual sort, I can only say that mine do. But as I've no idea what troubleshooting steps you've used.
Regards
TD

My HP office jet 6500 printer is stuck on pause. I do not have an admin name or password as it is a wireless printer and I never had to set one up. It keeps asking me for admin name and password...

My HP office jet 6500 printer is stuck on pause. I do not have an admin name or password that it keeps prompting me to give, as it is a wireless printer and that info was not required when we set up the printer. I have checked all diagnostics and connections and they are all good/passed. I am so frustrated!!! This has never happened in the past.

What is asking you for an admin name and password? What does the dialog say, exactly?
What model iMac are you using, and which OS version?
If it is earlier than Lion or Snow Leopard, try deleting the printer and adding it again as explained in this document
http://support.apple.com/kb/TS3140
Otherwise you can "reset the printing system" as explained here
http://support.apple.com/kb/HT1341
and here
http://support.apple.com/kb/TS3147
Download the latest drivers here (Lion, Snow Leopard)
http://support.apple.com/kb/DL907

Windows 7 64 bit machine with printer installed locally takes 2-3 minutes for printing most of the time and fails to print some time.

Our customer have 3-4 windows machines in local area network (No Domain Login) with different OS versions and platform architecture (32 / 64 bit)
I have no idea about the configuration of machine to which printer is hooked up but it is running Windows for sure.
This machine is accessible from any other machine in LAN. They have another machine running Windows 7 64 bit OS on which they have installed the printer connected to earlier machine using local printer driver installation
with local TCP/IP port being selected during installation. Installation goes well, printer gets installed successfully and shows ready state. but when we try to print anything on it takes 2-3 minutes to complete print job. They have tried
this on printers with couple of different model and make but the result is same delayed printing. They have also tried to install different printer drivers like HP printer model specific driver and HP universal driver too , but the result is
the same in all cases. earlier when they were using 32 bit XP machine with printer installed same way that they installed now for win 7 64 , there was no issue seen with regards delayed printing. is this a issue with windows 7 64
bit printing system ? or it has to do something with mixed and matched (32/64 bit )printer drivers running on different machines on LAN ?
I will try to get more information with regards to the machine to which printer is connected.In the mean please revert back to me if any one had face similar issue and able to resolve it successfully.
Thanks in Advance.

Hi,
Have you tried ping ip address of printer? and check if there exists any data lost in network connection. If your network connection is crowded, it can cause delay for printer.
Also, please attempt to disable all security software temporarily, such as antivirus, firewalls,etc and
clear all printer cache.
Locate to task manager, check the state of spoolsv.exe, including cpu and memory. If it has high cpu or memory usage, it may be caused by malware. Thus, you'd better to make a full scan with the latest anti-virus.
Karen Hu
TechNet Community Support

HP Officejet Pro 8500 Cyan ink will not print. installed a new one, but no success

HP Officejet Pro 8500 Cyan ink will not print. installed a new one, but no success

I had to replace both printheads about $85 a piece. It may be more cost effective to buy a new printer. Once I replaced the one printhead, the other one went out. It is common and it did solve the issue. I really like my printer and if it gets me another year or so, I think it was worth it.

Printer install

I bought a new laptop computer with windows 8. I can't get my printer to install. Do I have to buy a new printer? I had this printer installed on my old computer with windows xp. Can I update the driver and how do I do this?

Hi,
Well, we can't answer your question because we don't know your printer. Please use the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do i change my hp office pro 8600 printer from offline to online

how do i change my hp office pro 8600 printer from offline to online

Please read this post then provide some details. What operating system? How is the printer connected - USB, wired LAN, or Wireless LAN?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue if you are using some recent version of Windows.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

MS Office 365 fails to install in default on Win 8.1 new laptop S75-A7221

Hello,
New license MS Office 365 fails to install in default on Win 8.1 new laptop S75-A7221.
I downloaded software from Microsoft MS Office 365 site.
What is the contact for helpdesk in India for quick resolution?
Thanks,
Miroslaw

Run Microsoft FixIt in the following link to check the result.
http://support.microsoft.com/kb/2822317
If your Office installation problem continues to occur, try to perform the steps provided by the same link for general troubleshooting.
Tony Chen
TechNet Community Support

Office 2010 "outlook not installed"

I have a user (I'm their IT support) who has a BB Curve 8350 (?) and when they try to sync to office 2010 (calendar and address book) it lets me configure it in Intellisync but then gives me an "Microsoft Outlook Not Installed" error directly afterwards. Office is very clearly installed because I can open it up and check email etc. I'm using Windows 7 32 bit OS, Office 2010 32 bit and BBDM 6.0.1 B21. Phone is also updated to 5.0.
I've hunted through the forums but haven't found my answer. Any suggestions?

I have the same problem. Please need help

What settings do i put my printer on to print 5.5*8.5 invitations on a 6500 office jet hp printer

what settings do i put my printer on to print 5.5*8.5 invitations on a 6500 office jet hp printer

dawie,
Here is a link to a post that has some good information on mirror image printing and what has worked for some other people. You should be able to go to Control Panel>Printers>right click on printer>Properties>under General tab click Printing Preferences>under Advanced Tab click Mirror Image ON. However, like i said others have had some issues with this. Hopefully you will find the link below helpful.
http://h30434.www3.hp.com/t5/Other-Printing-Questions/Printer-properties-keeps-changing-Mirror-Image...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

MS Office vApp - no printer installed

Similar Messages

Maybe you are looking for