MS Outlook send/receive data file missing

Whenever I open up MS Outlook 2007, I get an error message:
"outlook cannot start because a data file to send and receive mail cannot be found. To add a data file, such as a person folder file, double-click the mail icon in windows control panel."
I have gone through and repaired the office program through add/receive programs and it did not work. Also, I have another computer that has office in my house, and all of the data files are the same - i cant find anything else that is missing. Is there anyone out there that has any ideas on how to fix this problem???

listed-as-unwise wrote:
Whenever I open up MS Outlook 2007, I get an error message:
"outlook cannot start because a data file to send and receive mail cannot be found. To add a data file, such as a person folder file, double-click the mail icon in windows control panel."
I have gone through and repaired the office program through add/receive programs and it did not work. Also, I have another computer that has office in my house, and all of the data files are the same - i cant find anything else that is missing. Is there anyone out there that has any ideas on how to fix this problem???
please try going to
control Panel
Mail
Email Accounts
Thne check if you mailbox has been removed, if it has then please try readding including your ms exchange server name
Finish
Try launching Outlook again

Similar Messages

How to send multiple data files / music files using bluetooth / whatsapp / emails...

hello everyone,,,
is there any option to send multiple data files / music files using bluetooth / whatsapp / emails...
as option to select multiple files using "SELECT in menu option / left aA"+ scroll tracepad" is availble with pictures only.
and while receiving files via bluetooth i'm unable to do any other activity.

One at time, via Bluetooth.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

Send/receive data without a terminating character

I am trying to use the visa driver to send hex data over a serial port. I have tried to disable terminating characters but when I read from the port the trasnmission still terminates with a 0x0A character. How can I send/receive data without a terminating character???

You need to call viSetAttribute with VI_ATTR_ASRL_END_IN set to VI_ASRL_END_NONE. In LabVIEW, use a write property node with the Serial End In mode set to None (0).
Dan Mondrik
Senior Software Engineer, NI-VISA
National Instruments

CF data file missing on FCP project files

Every time I open a saved project file on Final Cut Pro, it says CF data file missing on my FCP project files. Files seem to be in constant frames folder but all black and not highlighting. suggestions?
I was saving things on a MyBook studio external HD. I think earlier as I was working or saving on the external HD it disconnected.
But shouldn't it have all my files still?
I still see all my project files and capture scratches.
Any help or suggestions please?
Final Cut Pro 7.0.3
Mac OSx 10.7.4
processor 2.4 GHZ Intel Core i7
Memory 4GB 1333 Mhz DDR3

Hi Michael,
When I opened the FCP project. It says " CF data file missing CF+ filename here"
So I looked in my Render Files> Constant Frames folder and the files are in there. I tried to open the movie files and play them. When played, they all play back a black screen/nothing in the file? And some have a blue screen that says" unrendered".
So I try to search for the file to connect it back to the project, but when I go to th folder and try to select it. It isn't highlighted, so I can't select it. So they aren't missing.
So I have to press cancel. It seems like I'm not able to edit or work on the FCP project until I have those files connected.
Thanks for your reply,
Ingrid

SCOM SQL Query to find Mail Latency (Send/ Receive) Data.

Hi,
I unable to find Mail Latency (Send/ Receive) Data in SCOM 2012 SQL Query.
need your help to find SQL query that fetches below details
1. Average Time for Accessing Mailbox.
2. Average Time to Send and Receive Mail.
Regards,
Vinoth Kumar.

Hi Vinoth
There are no specific tables storing the mailbox related data.
To find information about Exchange in SCOM you need the Exchange management pack for the version of Exchange you are running, as well as monitoring the Exchange servers.
When that has been done you can find reports and performance views for Exchange.
I am unsure if you can find this specific information for Exchange in SCOM, i would look into the management pack. If you cannot find the information, i suggest you consult your Exchange administrator to get this information.
www.coretech.dk - blog.coretech.dk

How to merge two Outlook 2010 pst data files?

How to merge two Outlook 2010 pst data files?

Easy way: with the one you want to use open in Outlook and the other one not in your profile, go to File, Open, Import.
If you only want to merge some content, open both pst files in outlook and drag between folders. For calendar, use a list view to see all of the appointments.
Diane Poremsky [MVP - Outlook]
Outlook Daily Tips |
Outlook & Exchange Solutions Center
Subscribe to Exchange Messaging Outlook weekly newsletter

Question about send/receive data in as3

hello
i want to ask : how can i send data from flash to php using as3 and receive data from php using flash .
and another question : how can i upload files using as3 .
thank you .

Look into URLLoader documentation for sending/receiving and FileReference for uploading:
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/URLLoader.html
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/FileReference.html

Send & receive data over GPRS

Hi All !!!
I am developing a program to receive and send data over GPRS. A remote device is sending data at a particular port (6600) of my server. I am able to read that through ServerSocket. However I am not being able to send any data to that device.
Any help?

I am using the code:
// Constructor
public ServerSocketReader(Socket socket) {
super("MultiSocketThread");
this.clientSocket = socket;
this.setDaemon(true);
public void run() {
try {
OutputStream out = clientSocket.getOutputStream();
InputStreamReader in = new InputStreamReader(clientSocket.getInputStream ());
//BufferedWriter bw = new BufferedWriter(new FileWriter(_filepath, true));
java.util.Date date = new java.util.Date();
SimpleDateFormat sdf = new SimpleDateFormat("EEE, dd-MMM-yy HH:mm:ss");
GprsProtocol protocol = new GprsProtocol();
int charCount = 0;
char[] cBuffer = new char[1000];
byte[] bBuffer;
String fromClient = "", toClient = "START";
int ii = 0;
while ((ii = in.read()) != -1) {
fromClient = fromClient + (char)ii;
if (fromClient.endsWith("2Y")) { //according to protocol
toClient = protocol.processInput(fromClient); //Protocol
bBuffer = toClient.getBytes();
for (int k=0; k<bBuffer.length; k++) {
out.write ((char)bBuffer[k]);
out.flush();
fromClient = "";
out.close ();
in.close ();
clientSocket.close ();
//bw.close();
} catch (IOException ioe) {
//out.println("Error::" + e);
System.out.println("Error in writing file : ");
ioe.printStackTrace();
} catch (Exception e) {
System.out.println("Error in ServerSocketReader : ");
e.printStackTrace();
finally {
//this.destroy();
I am geeting the error at line :-
while ((ii = in.read()) != -1) {
the error is :-
java.net.SocketException: A connection with a remote socket was reset by that socket.: A connection with a remote socket was rese
by that socket.
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:104)
at java.net.SocketInputStream.read(SocketInputStream.java:82)
at java.io.InputStreamReader.fill(InputStreamReader.java(Compiled Code))
at java.io.InputStreamReader.read(InputStreamReader.java:256)
at java.io.InputStreamReader.read(InputStreamReader.java:229)
at ServerSocketReader.run(ServerSocketReader.java(Compiled Code))

Error data file missing

I received an error that a data file was missing when closing Adobe Captivate 4.
Now I have lost some of my cpt files. How can I recover the se files
Can I recover these files from the .swf files.
Desperate help needed please.

Hi ther
A decompiler will take your original SWF file can convert back into a working Flash file. One thing to note though is that Captivate SWF files decompiled can look very confusing so please bear in mind that making changes to the Slides (now frames) won't be easy.
If you decide you need to go down this route then you might want to download a trial of the SoThink SWF Decompiler.
http://www.sothink.com/product/flashdecompiler/
Best regards,
Mark

Outlook 2013 requires data file repair each time it's started.

Title pretty much says it all. Upgrade from Outlook 2010. Each time the new Outlook is loaded I get the "Something is wrong with one of your data files" alert box. It wants to repair one of the archive .pst files (I have an archive for each year
the account has been in service (2000-2011, 2012 and 2013 are live on the server) and I load them all when I launch Outlook) and always succeeds. Afterwards I can relaunch Outlook without a problem, until I shut it down again for any reason (unless there's
been *no* activity other than the exchange connect since launched).

Hi,
I am getting the same set of symptoms. However, today I received another error during the AutoArchive which points to the Internet Calendar Subscriptions.pst as having problems and telling me
Error while archiving store "Internet Calendars". Cannot load special folder information in store Internet Calendars. Windows Search exited without properly closing your Outlook Data file 'C:\Users\dstock_000\AppData\local\Microsoft\Outlook\Internet
Calendar Subscriptions.pst'. Microsoft Outlook must be restarted.
I am going to try to delete this .pst file and allow Outlook to rebuild a new one to see if this cures my problem.
As my problem was to do with my Internet Calendar Subscription.pst deleting it was not an issue as the file rebuilds from the internet calendars when it restarts. At first restart Outlook complains that the file does not exist but on
second reboot the file has been recreated and my problem has been resolved.
This would work for any .pst file issue but be aware that you may not be able to rebuild an email file.
Deleting the Internet Calendar Subscription.pst file finally worked for me. I tried rebuilding multiple times but it would keep failing after having Outlook open for a few minutes.

AppleMobileDeviceSupport.MSI Generates Outlook Send/Receive Error

I had to install AppleMobileDeviceSupport.msi seperately because on the initial install of itunes it errored. I updated to Vista SP1 and then installed just the MSI. Before I installed the MSI (and after the SP1 update) I was on Outlook and sent/received several times so it was working properly. But once the MSI was installed, Outlook started throwing 0x80042108 errors on send/receive.
Any suggestions/advice? Uninstalling the msi doesn't help!
Any assistance is appreciated!!

I updated to Vista SP1 and then installed just the MSI.
Doublechecking something related to the SP1 install part of proceedings.
In your "Start" menu, right-click "Computer" and select "Manage". Click "Device manager".
Is your Device manager currently completely blank?

Lync 2013 breaking Outlook send/receive

We have Office 2010 64bit and Lync 2013 64bit
When we install Lync, users Outlook stops syncing. They have to manually click Send/Receive a few times to get it to work, or rebooting the computer a few times to get Outlook working again.
Are there any known issues?

Hi,
Please remove Lync 2013 and test if Outlook works properly. If not, please check if the same issue happen on the machines. You can also post the issue on Office forum for further assistance. Thank you for your understanding.
http://social.technet.microsoft.com/Forums/en-US/category/officeitpro
Kent Huang
TechNet Community Support

Outlook 2003 old Data File can't be removed and can't set up up iCloud sync with Outlook

I had an issue with Google Calendar Sync after installing iCloud so I tried to remove my iCloud install. When I go into Outlook 2003 it shows a Data File that exists with the iCloud name, but when I click on remove it comes back with "Äre You Sure....", I click yes and then an error states "The Requested Operation Failed." Then I try to click on the Settings Tab and I get the error "Än Unknown Error Occured, error code 0x8004011c". The Open Folder tab is grayed out. If I click on the E-mail tab, no iCloud email exists. Hence something is lingering but I cannot get rid of it.
When I go into the iCloud Control Panel the Mail, Contacts, Calendar and Tasks with Outlook is not ticked. If I try to tick it and then apply the changes, it goes through the set-up for a few seconds and then returns an error box entitled Outlook Setup for iCloud with an error message Outlook Setup Error with a yellow triangle with an exclamation mark inside of it. The options are "report", "try again" and "cancel" - all which are useless and don't do anything.
Anyone have any ideas on how I can remove this Data File that supposedly exists within Outlook. I have searched the c: drive and there is nothing by the name it states.

Sorry...I have been looking at this for too long. It is actually Outlook 2007.
I actually have already removed the calendar, tasks, etc from Outlook as your last paragraph outlines, but it doesn't help.
I have hoping to avoid the uninstall / reinstall, but I was leaning the same way.
Thanks for your response. Let me know if you think of anything else.

RS-485: PC can send/receive data from PCI card, but LabVIEW can only send to card.

I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim

Tim359 ha scritto:
I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim
RS232 interface consist of 2 indipendent communication crossed lines between 2 devices (9DSub connector: Pin 2-RX Pin 3-TX pin 5-Gnd)
RS485 interfaceis a bus, shared between 2 or more devices. (like ethernet or CAN Bus)
This means that an incorrect use of the bus can lead to a "packet collision" if 2 or more devices try to send a message on the bus at the same time or at least their messages, partially "overlap"
About 10 years ago I have used a PCI 2 RS485 port: I remember that I have to change the status of RTS serial control line to switch between transmit and receive mode.
This can be done using the serial VISA property:
Serial Settings --> Modem Line Settings --> DTR State
or using the VI
<LabVIEW dir>\vi.lib\Instr\_sersup.llb\serial line ctrl.vi   (LV 8.6.1)
The result was that the slave device connected, send me the response after few nanosec. causing the lost of the answer.
because LabVIEW use more than some nanosec. to change RTS property after sending message on the 485 bus calling a VISA Write.
So for me there was 2 possibilities:
- use 2 RS485 port (1 for transmit 1 for receive echo transmit included)
- use this converter
         http://www.advantech.com/products/ADAM-4521/mod_2E78D425-8B08-43F6-81B0-1B924E53E075.aspx
this converter, after sending a message on the bus, electronically switchs back to receive mode without losing a byte.
But the question is :
what does it means
"RS-485 mode supports Auto Transceiver turn around (ATTA)"
of your card?
bye

MS Outlook send/receive data file missing

Similar Messages

Maybe you are looking for