MS Project 2013 has stopped working APPCRASH in 64 bit Windows 7 OS

Dear All,
last 3 days i am facing problem regarding Project Professional 2013 sync with SharePoint 2013 ,
When i click the ´Open with Project´ in SharePoint task list,it opens the Project Professional and stopped the Project.(ref below screen shot)
Error in Detail:
Problem signature:
Problem Event Name: APPCRASH
Application Name: WINPROJ.EXE
Application Version: 15.0.4569.1504
Application Timestamp: 52c5ecd5
Fault Module Name: WINPROJ.EXE
Fault Module Version: 15.0.4569.1504
Fault Module Timestamp: 52c5ecd5
Exception Code: c0000005
Exception Offset: 00a0579f
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 16393
Additional information about the problem:
LCID: 1033
skulcid: 1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Please advice anyone....
abbijohn

Hi,
Try to repair MS Project from the Windows control panel to see if it helps.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Similar Messages

Itunes has stopped working APPCRASH

hello guys !!A few days ago When I click on iTunes on my laptop(HP Pavilion dv6625us Entertainment Notebook PC) Appears a window saying itunes has stopped working APPCRASH . I uninistall y install iTunes again the last version and do not solve the problem.Never had this problem with my itunes.how resolve this problem ?Can't use my itunes.
When I click view detail appear this information below
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 8.0.2.20
Application Timestamp: 4925c4fe
Fault Module Name: iTunes.exe
Fault Module Version: 8.0.2.20
Fault Module Timestamp: 4925c4fe
Exception Code: c0000005
Exception Offset: 00092cfc
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.microsoft.com/fwlink/?link...3&clcid=0x0409
Message was edited by: zitro_pr

You need to check to see if your QUicktime works because iTunes will not work if Quicktime does not.
If Quicktime works normally, use this troubleshooting article:
http://support.apple.com/kb/TS1717
If QUicktime does not work:
Have you installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar, (possibly starcodec pack, 3ivx)
If so uninstall them, they are bad news for QUicktime.
Then download the version of Quickime without iTunes:
http://www.apple.com/quicktime/download/win.html
Now Remove Quicktime using the method for Quicktime in this article (just Quicktime):
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
When you come to your C:\Windows\system32\ folder you can delete any file or folder with Quicktime in the name.
Restart you computer
Install the stand alone Quicktime and check if it starts.
If it does you are in a position to find out if iTunes is OK.

ICloud has stopped working continuously get the message windows 8.1 operating system

iCloud has stopped working continuously get the message windows 8.1 operating system

Hi Fe-Can,
If you are having difficulties with iCloud you may want to use the steps in this article to troubleshoot -
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks for using Apple Support Communities.
Best,
Brett L

ThinkVantage Fingerprint Software 5.9.9.7282 stops working, crashing on 64-bit Windows 7.

ThinkVantage Fingerprint Software 5.9.9.7282 stops working, crashing on 64-bit Windows 7.
Issue producing on Lenovo ThinkPad W530.
Each time I tried to start the ThinkVantage Fingerprint Software, it is crashing with following error :
[Window Title]
ThinkVantage Fingerprint Software Application
[Main Instruction]
ThinkVantage Fingerprint Software Application has stopped working
[Content]
Windows is checking for a solution to the problem...
[Cancel]
Because of this crash I am unable to enroll my fingerprint data for windows logon.
I have noticed that all ThinkVantage softwares are crashing e.g. ThinkVantage Power Manager 6.
As per Lenovo Support Chat service I have updated the following softwares/drivers to the latest versions:
1. power manager
2. power management
3. think vantage
4. hot key features
But still no luck, fingerprint software is still crashing, please help!

Hi I have exactly the same problem, you are not alone. As soon as I find a solution I will post it here
greets

Microsoft Office 2013 has stopped working

Please can you help? My PC is running Windows 8 Professional Plus 64 bit. I downloaded and installed Microsoft Office 2013 32 bit and it worked perfectly until I changed my graphics card to an Asus Radeon HD6450 Silent. Since then, all
the programmes, Outlook, Word, Excel etc. have stopped working. I have Microsoft Office 2010 32 bit installed as well and that is still working fine.
I have tried removing COM Add-ins and have also repaired MS Office 2013 but neither have worked. I have read the KB article but the driver dlumd32.dll does not appear to be installed on my machine. All the applications will run in Safe Mode.
I have uninstalled Office 2013 and re-installed it but at the end of the installation I got the ‘Microsoft Office has stopped working’ message.
The event logs for each say:
   EventData
           outlook.exe
           15.0.4433.1506
           508fa723
           atidxx32.dll
           8.17.10.453
           5064ffd8
           c0000005
           003c376c
           e7c
           01ce1cfcf2eb3b12
           C:\Program Files\Microsoft Office 15\root\office15\outlook.exe
           C:\WINDOWS\SYSTEM32\atidxx32.dll
           34205235-88f0-11e2-be82-002354da9f87
            powerpnt.exe
           15.0.4433.1506
           508fa697
           KERNELBASE.dll
           6.2.9200.16451
           50988950
           e0000003
           00014b32
           1414
           01ce1e86a1ccb5b6
           C:\Program Files\Microsoft Office 15\root\office15\powerpnt.exe
           C:\WINDOWS\SYSTEM32\KERNELBASE.dll
           e773a04c-8a79-11e2-be83-002354da9f87
onenote.exe
           15.0.4433.1507
           509dd98c
           unknown
           0.0.0.0
           00000000
           c0000005
           0166008c
           de8
           01ce1e86907c6cb7
           C:\Program Files\Microsoft Office 15\root\office15\onenote.exe
           unknown
           d162f65f-8a79-11e2-be83-002354da9f87
outlook.exe
           15.0.4433.1506
           508fa723
           atidxx32.dll
           8.17.10.453
           5064ffd8
           c0000005
           003c376c
           b40
           01ce1e867fe36df0
           C:\Program Files\Microsoft Office 15\root\office15\outlook.exe
           C:\WINDOWS\SYSTEM32\atidxx32.dll
           bf7330ec-8a79-11e2-be83-002354da9f87
   IEXPLORE.EXE
           10.0.9200.16482
           50cfc9bf
           atidxx32.dll
           8.17.10.453
           5064ffd8
           c0000005
           000135b4
           9b8
           01ce19d63a5e4f4c
           C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
           C:\WINDOWS\SYSTEM32\atidxx32.dll
           7b558297-85c9-11e2-be7e-002354da9f87

Hi Lesley,
By checking the event log you provided, it seems this problem also occurs with Internet Explorer, isn't it?
And most of them are related to the atidxx32.dll file, I'd suggest we remove the graphics driver and see if this problem will still occur, if no, try to install any ohter version of graphics driver to see if this problem will still occur.
Max Meng
TechNet Community Support

BlackBerry Desktop will not run: "BlackBerry Desktop has stopped working" / APPCRASH

With no apparent cause, BlackBerry Desktop 6.0.2 will not run on my machine any more; I get the standard Windows error dialog, "BlackBerry Desktop Software has stopped working"; the OS appears to search for a solution, but after 1-2 seconds, the dialog disappears. The full error log:
Description:
Stopped working
Problem signature:
Problem Event Name:           APPCRASH
Application Name:    Rim.Desktop.exe
Application Version:6.0.2.44
Application Timestamp:        4db5e0d4
Fault Module Name:KERNELBASE.dll
Fault Module Version:          6.1.7600.16385
Fault Module Timestamp:     4a5bdbdf
Exception Code:       e0434f4d
Exception Offset:     0000b727
OS Version: 6.1.7600.2.0.0.256.48
Locale ID:     1033
This is on Win7 Professional. Uninstall/reboot/reinstall does not fix it. Any thoughts?

You could try troubleshoot compatibility in Win7.
Please give me Kudos if you feel like I helped you
Thank you
cuse165

Adobe Photoshop CS5 has stopped working (Win 7, 64 bit)

I am trying to run Photoshop CS5 on Windows 7 64bit. Everytime I open the program, I get an error saying "Adobe Photoshop CS5 has stopped working", immediately after the splash screen goes away and the main gui opens. The only option on the error is "Close Program".
I am on a computer with an i7 processor and 12GB of memory. I have two Nvidia GTS 250 video cards, running four monitors.
Over the course of the last day, I have reformatted my computer, and reinstalled Windows twice. I have reinstalled the CS5 Master Suite more times than I can remember. I have also downloaded and installed the latest video card drivers from Nvidia.
I continue to have the same problem every time I try to open any of the programs in the CS5 suite.
The only time I have come close to getting it to work was immediately after installing the new Nvidia drivers, before restarting my computer. I was able to open it one time without it crashing, Once I restarted my computer, Photoshop continued to give me the same error every time I try to open it.
I have no other software installed on my computer. It is a brand new installation of Windows 7.
I have been on the phone with Adobe technical suuport for about an hour and a half, and I have yet to get a single suggestion other than attempting an install with my network cable unplugged. Other than that, they seem to be fond of transfering me back and forth between departments (and asking me to repeat all of my information every time).
As you can probably tell, I am very frustrated at this point and would greatly appreciate any suggestions.
Thanks,
Trevor

My scenario and history:
Windows Vista Ultimate and now Windows 7 Ultimate
NVidia Quadro Fx 4500 driving 4 monitors total SLi on or off - makes no difference. Drivers irrelevant.
2 x Xeon 5160 (so total 4 cores)
24Gb RAM
PS CS 4 or 5
4 monitors - - yep it is the 4 monitor thing.
Fails everytime as you describe.
Observation - If you Remote Desktop Connection onto the computer - and so in effect are using only ONE monitor - PS works fine.
A WORKAROUND for 4 or 5 - I don't consider this a fix because you lose some functionality but it gets you 99% there and is the same workaround for CS4 or 5
Go to<drive>:\Program Files\Adobe\Adobe Photoshop CS5 (64bit)\Plug-ins\Extensions\ (or CS4 - depending on version)
Locate File:
ScriptingSupport.8li
Disable this extension by renaming the file with a tilde in front of the file name. Thus:
~ScriptingSupport.8li
Start Photoshop - it works and is mainly functional.
The only real downside I have discovered is that disabling this scripting extension means you cannot use some of the built in scripts under FILE - SCRIPTS - the biggest PIA for me being the Contact Sheet builder no longer works. But as I now use Lightroom to create contact sheets - this is not a big loss. Other scripting functionality - I am sure is affected - but not to a point I find PS unusable.
ADOBE - if you read this - it has been that extesion now for the last two editions of PS.

Getting itunes has stopped working message after downloading to Windows 8.1

Getting ITunes has stopped working message after 10 seconds after downloading to Windows 8.1

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You could also try working through
TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
tt2

ITunes has stopped working. I'm using Windows 7 on iOs 6.1

iTunes has stopped working several times. I'm using Windows 7 on iOs 6.1 and I'm mad about this?!

We can't know. You have not told us what exactly the problem is. If there are any warnings, you need to provide them along with other info like the crash logs. If not you have to explain the situation in more detail. Just saying that it doesn't work anymore is not particularly useful.
Mylenium

Kdbsync.exe has stopped working - win 7 64 bit

I am running Win 7 64 bit on an HP Pafilion HPE h8-1360t. After last week's round of updates my computer will no longer play mp4 files, the Media Center will no longer come up (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the HP Magic Canvas also won't come up, and the mysterious message "kdbsync.exe has stopped working" comes up when I reboot.
After hours of reading forums, I have found that it appears to be related to the AMD grapics card update. My computer has an AMD Radeon HD 7570 card.
On the AMD site this is listed as a legacy card for XP computers. I am not sure why HP installed it in a computer running Win 7 64 bit with an Intel Core I7 CPU. This does not give me confidence in HP equipment.
The AMD utility correctly detected my card and told me that I needed a driver called:
14-4-win7-win8.1-64-dd-ccc-whql.exe
But when I clicked on the Down load button, I got the message, "Could not conntect to server. Could not parse error."
I did not find any such driver on your website.
How can I get my Media Center working again?
This question was solved.
View Solution.

The idea of turning off all the non-Microsoft services scares me to death as I now have my computer running the way I want it to.
I also posted on the AMD forums as I had determined that their board was the offending piece of hardware:
http://forums.amd.com/game/messageview.cfm?catid=454&threadid=173935&forumid=11 You might want to read my reply to the agent who helped me.
Basically I had to uninstall all AMD drivers and sotware using Control Panel/Programs & Features and then run the AMD Clean Uninstall Program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
Then install drivers from here:
http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64#amd-catalyst-packages
I would not recommend that you install this set of drivers unless you are SURE that they are correct for your hardware. I could not use the Steps 1-5 on the AMD site because the last step required that you pick the operating system that your hardware is running. The video card that HP installed in my "latest and greatest" computer of a year ago was so old that the only operating systems offered in step 5 were XP and Vista! Be aware that HP does use legacy hardware in its newest computers.

Itunes has stopped working (Win 7 64 bit)

I keep getting this when I try to sync my iPad 2 and my iPhone 4. It gets all the way through the sync to photos and then I get this issue:
iTunes has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.
I have uninstalled and reinstalled itunes.
I have run all updates I can think of and rebooted several times.
I have checked QuickTime and all seems fine with it.
I have unchecked the photos and doesn't seem to make a difference.
Ideas???
MsHeather1

Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

Liquify tool has stopped working in CS6 Extended after Windows 8.1 upgrade

My liquify tool in CS^ Extended has stopped working after upgrading my operating system to Windows 8.1. It was fin in Windows 8.0. Suggestions on how to fix this please.

This is not a proper solution (as it would cost you the GPU dependent features like Rotate View Tool etc.) but it does indicate that you may have to update your GPU driver from the GPU maker’s site.

"Skype has stopped working" upon launch (7.3) Windows 7

I have been using Skype for more than a year with no issues but today when I launched Skype it came up with a message saying that "Skype has stopped working" and asked me to send information to Microsoft. Skype will not open at all - this message appears a few seconds after opening it. I have tried opening using admin and reinstalling but Skype still refuses to open.
The error log is as below:
Log Name: Application
Source: Application Error
Date: 05-04-15 12:29:29 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: user-PC
Description:
Faulting application name: Skype.exe, version: 7.3.60.101, time stamp: 0x5512d489
Faulting module name: WININET.dll, version: 9.0.8112.16526, time stamp: 0x528551da
Exception code: 0xc0000005
Fault offset: 0x0003cb7a
Faulting process id: 0x11c0
Faulting application start time: 0x01d06f485486ef14
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\syswow64\WININET.dll
Report Id: 954b0e64-db3b-11e4-8404-14dae9ceba14
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-05T02:29:29.000000000Z" />
<EventRecordID>35565</EventRecordID>
<Channel>Application</Channel>
<Computer>user-PC</Computer>
<Security />
</System>
<EventData>
<Data>Skype.exe</Data>
<Data>7.3.60.101</Data>
<Data>5512d489</Data>
<Data>WININET.dll</Data>
<Data>9.0.8112.16526</Data>
<Data>528551da</Data>
<Data>c0000005</Data>
<Data>0003cb7a</Data>
<Data>11c0</Data>
<Data>01d06f485486ef14</Data>
<Data>C:\Program Files (x86)\Skype\Phone\Skype.exe</Data>
<Data>C:\Windows\syswow64\WININET.dll</Data>
<Data>954b0e64-db3b-11e4-8404-14dae9ceba14</Data>
</EventData>
</Event>

Try first to update your Internet Explorer to the currently latest IE11 version for Windows 7. http://www.microsoft.com/en-us/download/internet-explorer-11-for-windows-7-details.aspx If updating will still not help, then run this troubleshooting tool to fix connection issues in Internet Explorer. http://support.microsoft.com/en-us/kb/936211

HP installer plugin has stopped working - hp photo scanner 4890 - windows 7

I upgraded from XP3 to windows 7. I don't use my scanner much but discovered recently it doesn't work. I tried everything I could think of including: uninstall/ reinstall/update drivers/deleted all related files from OS program files/downloaded vista compatability fix andfollowed instrauctions Several times with error message after program ectracted the files "HP installer plugin has stopped working - close program.
I've bought lots of computer hardware over the past 30 years. I did a lot of PC upgrades for friends and family and always relied on HP for quality. Things certainly changed for the worse when they bought compaq.
I hope somebody here has found some information as to what this install plugin is and how we can fix this. I note I'm one of many having this same problem with HP. **bleep** it!

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Adobe Premier Pro CC has stopped working win 7 64 bit

I have a Quadro KM3000 Nvidia, in a Dell M6700. Pre Pro has been working fine until I downloaded the latest version. I use SSD's. I have read other threads and already tried the following:
Downloaded the latest drivers (26 Sep 2014)
Tried to update the Intel HD400 (?) Drivers
Tried de-activating the Intel Graphics (that didn't work out too well)
Found the Pre Pro Preferences and renamed the folder. To force it to recreate. Still no joy.
If anyone can point me in another more promising direction that would be very much appreciated.

My scenario and history:
Windows Vista Ultimate and now Windows 7 Ultimate
NVidia Quadro Fx 4500 driving 4 monitors total SLi on or off - makes no difference. Drivers irrelevant.
2 x Xeon 5160 (so total 4 cores)
24Gb RAM
PS CS 4 or 5
4 monitors - - yep it is the 4 monitor thing.
Fails everytime as you describe.
Observation - If you Remote Desktop Connection onto the computer - and so in effect are using only ONE monitor - PS works fine.
A WORKAROUND for 4 or 5 - I don't consider this a fix because you lose some functionality but it gets you 99% there and is the same workaround for CS4 or 5
Go to<drive>:\Program Files\Adobe\Adobe Photoshop CS5 (64bit)\Plug-ins\Extensions\ (or CS4 - depending on version)
Locate File:
ScriptingSupport.8li
Disable this extension by renaming the file with a tilde in front of the file name. Thus:
~ScriptingSupport.8li
Start Photoshop - it works and is mainly functional.
The only real downside I have discovered is that disabling this scripting extension means you cannot use some of the built in scripts under FILE - SCRIPTS - the biggest PIA for me being the Contact Sheet builder no longer works. But as I now use Lightroom to create contact sheets - this is not a big loss. Other scripting functionality - I am sure is affected - but not to a point I find PS unusable.
ADOBE - if you read this - it has been that extesion now for the last two editions of PS.

MS Project 2013 has stopped working APPCRASH in 64 bit Windows 7 OS

Similar Messages

Maybe you are looking for