MS Remote Desktop crashes Mac OS X when trying to add a certificate

As written in the headline, when trying to permanently add a certificate, the window where I am supposed to enter my password produces the rainbow wheel of doom.
Steps to reproduce:
- Open MS Remote Desktop 8.0.8 (Build 25010)
- Connect to a server
- in "verify certificate", press "show certificate", then tick "always trust...."
- click "continue"
- password window opens, Mac crashes.
Steps to avoid the crashing:
- instead of "show certificate", just press "continue" - it works fine, it just doesn't store the certificate.

Hi,
The version 8.0.9 is released, please try the latest one and see how it works.
https://itunes.apple.com/us/app/microsoft-remote-desktop/id715768417
Best Regards.
Jeremy Wu
TechNet Community Support

Similar Messages

Remote Desktop Crashes When trying to log-in after changing password on the remote computer

Hi.
I use cisco VPN to connect to my work computer.
I can use RDC to connect to any computer on home network without issue.
Yesterday I changed to password on my work computer and now every time I try to log from my home computer RDC crashes.
I've disabled printing/clipboard on local devices and resourses, and I've deleted all the RDC cache files on the computer but I continue to have the same issues.
please help
Faulting application name: mstsc.exe, version: 6.1.7601.18540, time stamp: 0x53c72529
Faulting module name: ntdll.dll, version: 6.1.7601.18798, time stamp: 0x5507b864
Exception code: 0xc0000374
Fault offset: 0x00000000000bf922
Faulting process id: 0x44c
Faulting application start time: 0x01d078d866a9ba25
Faulting application path: C:\Windows\system32\mstsc.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 65a988c9-e4cc-11e4-8a77-f46d04eedf8b
http://answers.microsoft.com/en-us/windows/forum/windows_7-winapps/remote-desktop-crashes-when-trying-to-log-in-after/cc45b7be-62ee-4f83-b50b-db028ee32a7f

Hi hg,
I didn’t found relevant settings in remote desktop connection manager, I checked the “Use multiple monitors when necessary” under tools->options, but seems like it is used for span a full screen over multiple monitors. For now I’d suggest figuring out
why your remote session keeps crushing.
I suspect the crash is not related to password changing, similar cases normally occurs after some local device driver, please try to disable the local printer in Remote desktop connection local resources first.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 10 Remote desktop crash

Almost every time when connecting to W10 Preview build 9860 the remote desktop crashes with the following message:
Faulting application name: svchost.exe_TermService, version: 6.4.9860.0, time stamp: 0x5436329a
Faulting module name: rdpcorets.dll, version: 6.4.9860.0, time stamp: 0x543626df
Exception code: 0xc0000005
Fault offset: 0x000000000002b4c9
Faulting process ID: 0x3e8
Faulting application start time: 0x01d00ef1ef145db3
Faulting application path: C:\Windows\System32\svchost.exe
Faulting module path: C:\Windows\system32\rdpcorets.dll
Report ID: ca08b2a1-7ae7-11e4-95fd-0023549b70e3
Faulting package full name:
Also some services werde stopped due to this crash, like cryptsvc, workstation and others..
The connection was established from Windows 8.1. Any Solutions available?

What Remote Desktop options have you chosen on the client (i.e., system where you're making the connection from) when making the connection? Have you tried varying them?
For what it's worth, I seem to be able to make a remote desktop connection to my Win 10 TP 9879 test system just fine. In my case I happen to be making the connection at the same screen size (1920 x 1200 pixels) as my local console uses.
Also, how are you breaking the connection? Are you selecting "Disconnect" on the remote system, or are you just closing down the Remote Desktop application? That could make a difference.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Remote desktop for mac decryption using standard RDP Security mechanisms failed code 4498

Remote desktop for mac decryption using standard RDP Security mechanisms failed code 4498
i see this error when accessing an email server and it freezes the screen. This is happening every 2 minutes or so. any idea what is happening?

Hi,
Would you please provide us the log file after the issue occurs for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email -> Post the log here.
Thanks.
Jeremy Wu
TechNet Community Support

MS Remote Desktop for Mac (v8.0.9 - 8.0.12): issue with "Session (ID #) remote control failed."

Hello,
I'm a SysAdmin for a small-med business in CO. We use a cluster of 3 RDS servers that are load-balanced with round-robin DNS and an RD Gateway. When I remote in from a PC, all works as expected. However, when I remote in from my MacPro (my main machine at home)
and try to remote control a user's session, I get this error:
Note the ID number is unique to the user's RDP session, so will vary each time.
This is 100% a bug in the "Microsoft Remote Desktop for Mac" program; I am positive of it at this point.
Does anyone from MS actually monitor these threads at all, or am I wasting my time? Thanks...

Hi,
As this happens with him specific from MRD MAC check whether he is taking RDP with IP address or hostname. Also try to uncheck the Option "Bypass RD Gateway for local address" under RDSH configuration and verify the result.
Also for more detail he can collect log from MAC side by following path.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Microsoft Remote Desktop for Mac and Win 2000 Server

Hello guys,
Could you please confirm that the latest version 8.0.15 is compatible with WIN 2000 Server connections? If not, could you please advise which version of Microsoft Remote Desktop for Mac is the match in order to connect to a WIN 2000 server.
Thank you in advance,
Bogdan

Hello Bogdan
WIN 2000 is supported. See a complete list of supported Windows SKUs here:
https://technet.microsoft.com/en-us/library/dn473006.aspx
Go to the AppStore and download Microsoft Remote Desktop.

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?

How do you solve error "You can't use this version of the application Install Mac OS X.app with this version of Mac OS X" when trying to go back to leopard from lion?
Local Mac shop said to hold down "c" after inserting disk to get "disk utility" to come up in order to wipe hard drive. I can't seem to get it to do this.

This W7 was purchased for using Fusion, as others did - per reviews from amazon. The technician today called their contact at VMWare - Fusion not officially for use with Lion - even though I read at the VMWare support site that others have made it work. Apparently my setup doesn't work.
Do you know how to do the proceedure for bringing up the disk utility when starting the disk?
BTW, some of the windows applications I want to continue using are Incredimail, Calendarscope, Stamps.com and a few others I have used over many years. What do you use for email and calendar?
Wow, sounds like another reason to not use MS Windows.
Regarding your Disk Utility question, please elablorate I'm not sure what you're trying to do. Disk Utilty is just that...a utility, it's something most users never have to use especially on a new computer. Let me know what you're trying to do there before I give you some instructions.
As for as your Windows apps I would recommend using Mail and iCal, both come as part of OS X and are very robust tools. Don't discount the software built right into OS X it's very robust and powerful not all like the bloatware most Windows boxes ship with. Stamps.com well I'd look for another alternative. It's clear they don't support OS X which makes me a little suspicious that they're so behind the times.
Also if you have not been exposed to these links before I'd strongly recommend bookmarking them and using them. They're extermely useful!
Switch 101
Mac 101
Find Out How Video tutorials

HT4356 I downloaded Printopia Demo to my Mac laptop, but when trying to install it, a window comes up showing the printer is recognized, but there is no button to go any further. What do I have to do?

I downloaded Printopia Demo to my Mac laptop, but when trying to install it, a window comes up showing the printer is recognized, but there is no button to go any further. What do I have to do?

Close the window and print .... Read this for the details. Once you install it - you should be able to print from the print option in any app.
I have downloaded the demo twice. I forget exactly how to do it, but it is very simple. If you installed Printopia, just try to print something - try a web page or a photo. Tap the Arrow icon in the upper right corner in most apps to get to the print option.

Labview crashes when trying to add CLIP

When trying to add component level IP into Labview FPGA the program crashes (non-gracefully) when performing the check syntax.
Steps to reproduce
Load Project (Happens with a new unsaved project as well).
Under FPGA Target (<Any Device>) -> Properties -> Component-Level IP
Select Create File
Add any VHDL file (also used the DemoClipAdder.vhd from the High-Throughput Example)
Choose User-defined IP
Check Syntax
As syntax is being checked, the following appears in the log :
   Built simulation executable x.exe
   Fuse Memory Usage: 136412 KB
   Fuse CPU Usage: 468 ms
Labview hangs for a couple of seconds then crashes
Alternatively :
Load Project (Or create a new project)
Under FPGA Target (<Any Device>) -> New -> VI
In Block Diagram, add IP Integration Block
Save VI
Double click IP Block
Add Synthesis File -> DemoClipAdder.vhd
Check Syntax (Completes successfully in this flow)
Generate
The following is produced in the log:
   Built simulation executable x.exe
   Fuse Memory Usage: 136668 KB
   Fuse CPU Usage: 421 ms
Labview Hangs for a couple of seconds then Crashes
I have tested this multiple times with multiple projects and FPGA devices with the same result every time.

Hi ThatOtherGuy
I have followed the steps to try to reproduce your problem but I have not been able to reproduce the error. I used this link to create the file and used notepad to create the file.
The Check sintax is successful and I do not get any error.
Have you try to do this in a different computer?
Which operating system do you have?
Which version of LabVIEW and drivers are you using?
Regards
Esteban R.

HI - new mac user. When trying to view clips on certain sites i receive the following text: "missing plug in" can anyone assist?

HI - new mac user here
When trying to view certain sites i receive the following text: "missing plug in" can anyone assist?
I think it is related to viewing video or clips.....

Well, if you're using Chrome, or Firefox go here this should also work with Safari. It will let you know if Flash is already installed in your browser. If your using Chrome it should have been intergrated. Were you able to get Flash installed so you can view video clips? Post back to let us know. Hope this helps. Also install Perian. See if that helps as well.
Joseph

I am getting an error when trying to add a caption.

I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.
If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.

I was able to get it to work. The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

Getting Error -9672 when trying to add printer wirelessly

Hi,
I seem to be getting an error -9672 when trying to add my HP PSC 1410 wirelessly to my airport network. I've tried on my intel iMac and my mac book but I'm getting the same error. Any suggestions on how to solve this?
ANY help is much appreciated.
Matt.

Unfortunately, not all USB printers are compatible with AirPort base stations. A quick look at the iFelix Unofficial AirPort Printer Compatibility List doesn't show this particular model. This doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

Error when trying to add transitions and titles

I'm getting an error message on iMovie HD 5 when trying to add a title or transition that says, "error in system operation (-4960)" can anyone help me out here?
thanks!

Hi minD:
This error usually indicates an OS problem, rather than iMovie problem.
Prevent Mac Disasters
Eight Simple Steps You Can Take Now to Keep Your Mac from Falling Apart
http://www.macworld.com/2005/01/features/preventmacdisasters/index.php
(Article is in 3 parts, don't miss parts 2 and 3)
Sue
(Thanks to Lennart Thelander for the copy & paste)

Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

I am not receiving the verification email when trying to add an email account

I am not receiving the verification email when trying to add an email account to facetime and iMessage. Is there something else I can do?

Hi,
I don't ever remember getting an email when Adding an account.
Apple seems to verify it some other way (a self test to see if it is valid ? an actual email ?)
I tried adding an older @mac.com account that is not a valid email (gained when MobileMe was the Apple service and the @Mac.com registration was used for iChat names).
I then tried to add a Yahoo one.
This got past the first part and said an email has been sent.
As you say this has never arrived.
( checked the web Site for Yahoo Mail as well as my Mail App.)
In each case I also checked the Spam and Junk folders in both places.
I then tried an iCloud ID.
(FaceTime seems to treat the Original Apple ID and the iCloud issued email as separate IDs)
I did not get and email (Although it said it was sent) I did get a Pop up for the FaceTime app asking if I wanted to add an email and a second for the actual email itself. (It turned out it added an @me.com email also issued by iCloud before the @icloud.com was issued.
This is much the way iMessages adds emails when you add the emails to an iPhone, the Mac version gets pop ups.
I recently had something similar in Messages that might be related.
In Messages 7 (Mountain Lion) it seemed it could be any Apple ID that was used.
In Messages 8 it seems this has to be an iCloud linked one.
The @mac.com one I used above could not be added to iMessages either when I tried it about two months ago.
It might be one I have removed the creating/Recovery email so that i could create another Apple ID.
The name continues to work in Messages as an AIM valid screen name but I could not add it as the iMessages account and got sent to iCloud to "register" it but ran into problems that I have not sorted out yet.
EDIT.
Checked the Apple ID site and the @mac.com email I used has no linked Alternative/recovery email.
8:29 pm Sunday; March 9, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK)

MS Remote Desktop crashes Mac OS X when trying to add a certificate

Similar Messages

Maybe you are looking for