MS-SQL 2005 Defined Views Not Showing Up In CR 10
Post Author: fgriffin
CA Forum: Data Connectivity and SQL
I have two SQL servers one is a MS-SQL 2005 and I have several defined Views on both servers. In CR 10 I can see the Views I have defined on the older version of SQL but I can't see the defined views on the MS-SQL 2005 server. Any ideas? Is this a known issue? Much Thanks! Frank
Hello Paul,
perhaps you might want to ask this question in the http://scn.sap.com/community/crystal-reports Space too, as the Crystal Reports experts usually watch that Space - so you might get an answer there sooner.
Best regards,
Laszlo
Similar Messages
-
Why do views not show up in HTML DB?
All,
When I create a new view with SQL/Plus why doesn't it show up in HTML DB? Views that were created previously (before install of HTML DB) are visable.
ThanksJust FYI, I had a problem with views not showing up when using the wizards. Reported the problem and was told it was a bug. Workaround was to create my pages from scratch and explicitly reference the tables instead of the views.
Although HTML DB could handle some views, views that were based upon other views or where there were several layers of views seem to give HTML DB a problem. -
Why is the icon for street view not showing up on the left side of the location on the maps app?
Because the included Maps app no longer gets the maps data from Google, so no more street view.
You can get a free Google Maps app from the iTunes App Store. -
Crystal Reports XI Release 2 Viewer Not showing when installed on 64-bit OS
Hello,
I'm having an issue with the Crystal Active X Report Viewer Control 11.5. I've got a VB .NET 2005 application that uses this control to view a Crystal Report. I created a Setup Project and added all of the required Merge Modules to it. It installs perfectly on both 32-bit & 64-bit OSes, but the viewer control does not show up when I launch my application on the 64-bit OS (it works as expected on the 32-bit OS). I've tried just about everything (including changing the target platform and using the Service Pack 6 Merge Modules among other things), but I just can't get it to work. The application doesn't error or anything, the form is just completely empty. Will this application work on a 64-bit OS?
Thanks!Hi,
This could be a good start:
What do I need to do to get the fastest issue resolution?
Next you might want to look here:
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567
If you find above helpful then look here
How do I resolve 'bobj' is undefined issue?
Hope that helps.
- Saurabh -
IPhone 4 iOS 4.1 - Calendar App List View Not Showing Events Immediately
After upgrading to iOS 4.1, whenever I open the calendar in List view mode the events do not show up immediately. I have to navigate to the "Day" style or "Month" style before I can see any events. All the events are viewable normally in both the "Day" & "Month" style calendar but the "List" view.
I regularly sync my iPhone with iCal events and with Google calendar. I did delete and re-added the Google account but the problem persists.
Has anyone faced this problem? I will be doing a full restore again today. My wife's iPhone 3GS is working fine with the 4.1 build of 3GS.
Message was edited by: Raja RoyHello all,
I have the same issue with my iPhone 3G under iOs 4.1 (8B117) with one local calendar and three Google calendars. The first time the Calendar application is loaded, if it opens in "List" view, no events are displayed. Switching to another view is enough to get the items back. In "Day" and "Month" views, the events eventually appear after some time (~5 to 10 seconds).
My boyfriend has the same problem on his iPhone 4 under iOS 4.1 (less annoying because of multi-tasking).
Hopefully this will be fixed in iOS 4.2... :-S
Regards,
HAL1 -
List view not showing all podcasts
Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
I'm running iOS 7.0.6 and iTunes 11.1.5Hey there sporry,
It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Restart the app
Close the app and open it again.
Restart your device
Turn the device off and on.
Update your device software and your apps
Update your device to the latest version of iOS.
Update your apps:
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password. The updates will download and install.
You might need a Wi-Fi connection to update some apps.
Install another app from the App Store
If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
Remember to use the same Apple ID that you used to download the app that you're having issues with.
Reinstall the app
Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
Delete the app.
Press the Home button.
Go to the App Store and download the app again.
Wait for the app to download, then open it from the Home screen.
If the download stops, you can resume it.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
CS3 - Design View not showing externally linked images
In CS3 Design View, externally linked images are not showing
up... i am only getting the place holder.
To prempt some questions:
1/ Links are correct and complete - apart from the fact that
they show up when previewing in the browser(s) - i have
crosschecked
2/ There are no spaces in the url
3/ In the 'View' menu, 'Display External Files' is checked
I had this problem before and escargo suggested saving and
rebooting. It worked then but strangely, today, that file is again
showing some of the externally linked images but not all. And on a
new file, created today, none of the externally linked images are
showing up... :(
I'm sure there's a simple solution to the problem... anyone
have any idea what it could be?
Thanks and cheers,
JJNope. Some show - some don't.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jhabrix" <[email protected]> wrote in
message
news:faom5n$9ku$[email protected]..
> Bump....
>
> Anyone have a solution to the above problem??? -
Design view not showing true design
I'm using Dreamweaver CS3, and have an issue with design
view.
I was editing the content of a page in design view, applying
styles from my main.css, when the page I was working on suddenly
lost all its styles, including heading & paragraph styles, and
placement of most div tags.
My header and the div tags inside that are still visible, as
is the side navigation, although the background image for the side
navigation is not. It seems to be all my editable regions that have
decided not to show correctly.
I've checked other pages and templates based on the main.css,
and they all appear to have the same problem.
The good news:
1. The CSS Styles inspector on each page shows it is attached
to the main.css, but lists only three styles under that style
sheet, all of which are named 'td img'.
2. The main.css itself looks fine. All my styles are still
there.
3. When I preview my site in a browser, it looks as it
should, so presumably it IS still attached to the style sheet, it's
just not showing properly when I'm working on it.
Any clues as to what's going on?
As I'm sure everyone says, this is kind of urgent, so any
help anyone can offer will be very gratefully received!
Thanks in advance for any help you can offer!
EDIT: I've been playing around with previewing the site in a
browser again, and have encountered another issue, which may be
related. I can preview a preliminary page, but all my links take me
to a 'this page cannot be found' error message. I was pretty sure
it wasn't doing this when I first encountered the problem with
design view, but I could be mistaken. Has something happened to the
internal links on my site, perhaps?In the View menu go to Style Rendering. Make sure Display
Styles is checked.
Walt
"Cyrus_Ice" <[email protected]> wrote in
message
news:fga649$m61$[email protected]..
> I'm using Dreamweaver CS3, and have an issue with design
view.
>
> I was editing the content of a page in design view,
applying styles from
> my
> main.css, when the page I was working on suddenly lost
all its styles,
> including heading & paragraph styles, and placement
of most div tags.
>
> My header and the div tags inside that are still
visible, as is the side
> navigation, although the background image for the side
navigation is not.
> It
> seems to be all my editable regions that have decided
not to show
> correctly.
>
> I've checked other pages and templates based on the
main.css, and they all
> appear to have the same problem.
>
> The good news:
> 1. The CSS Styles inspector on each page shows it is
attached to the
> main.css,
> but lists only three styles under that style sheet, all
of which are named
> 'td
> img'.
>
> 2. The main.css itself looks fine. All my styles are
still there.
>
> 3. When I preview my site in a browser, it looks as it
should, so
> presumably
> it IS still attached to the style sheet, it's just not
showing properly
> when
> I'm working on it.
>
> Any clues as to what's going on?
>
> As ever, this is kind of urgent, so any help anyone can
offer will be very
> gratefully received!
>
> -
User defined properties not showing up in design center
Hello,
I did a search on User Defined Properties in this forum but couldn't find my answer.
We are using OWB 10gR2.
I already added a user defined property called UD_ALTERNATE_SCHEMA to the TABLE class definition.
I signed on as repository owner, I switched to single user mode, used OMBREDEFINE on class definition "TABLE", I commited my changes switched back to multi-user mode and signed off.
Here's the proof (it's in bold):
OMB+> OMBDESCRIBE CLASS_DEFINITION 'TABLE' GET PROPERTY_DEFINITIONS
BUFFER_POOL BUSINESS_NAME CACHE_MODE CONSTRAINTS DATA_SEGMENT_COMPRESSION DEPLOYABLE DESCRIPTION FREELISTGROUPS FREELISTS GENERATION_COMMENTS INDEXES INITIAL INITRANS LOGGING_MODE MAXEXTENTS MAXTRANS MINEXTENTS MONITORING_MODE NEXT OVERFLOW PARALLEL_ACCESS_MODE PARALLEL_DEGREE PARTITIONS PARTITION_TABLESPACE_LIST PCTFREE PCTINCREASE PCTUSED ROWDEPENDENCIES_MODE ROW_MOVEMENT SHADOW_TABLESPACE SHADOW_TABLE_NAME TABLESPACE UD_ALTERNATE_SCHEMA UOID
OMB+>
Here is how I defined this new property for the TABLE class.
OMB+> OMBDESCRIBE CLASS_DEFINITION 'TABLE' PROPERTY_DEFINITION 'UD_ALTERNATE_SCHEMA' GET PROPERTIES (TYPE,DEFAULT_VALUE)
STRING NO
My question is this.
Shouldn't this new property be available for edit when I right-click on a table object in the GUI interface and then choose "Properties" and then choose "User Defined" tab? Unfortunately it is not showing up on any of my tables in any of my projects.
Did I miss a step here? Or did I completely misundestand the concept of "User Defined Properties"?
ThanksAs so often happens, I found the answer almost immediately after posting this message.
In the user defined tab, I hadn't clicked/selected a table. Once I clicked on a table object, my brand new user defined property appeared.
Sorry to have waisted your time. I was really tired yesterday afternoon when trying all this.
Thanks -
Design View Not Showing Up In Master On Plan View Page
Five days ago I downloaded a trial version of Muse and tried building Katies-cafe. Everything went OK except that the Design view is not showing up in the Master. Any Ideas? I disabled and re-enabled the thumbnail checkmarkin Plan view, and I also tried reseting the page properties in Design View, but it still doesn't work.
Hi smartserpent,
Can you post a screenshot of what you are seeing?
Thanks,
Preran -
User View not showing the assigned resources attributes in idm 7.0
Hi,
In a Remediation Form I am using a text field
<Field name='user.accounts[SimAD].group'>
<Display class='Text'>
<Property name='title' value='Title'/>
</Display>
</Field>
but here i am not able to get the value of group. when i dumps the user view its shows only Lighthouse resource under accounts attribute.
<Attribute name='accounts'>
<List>
<Object name='Lighthouse'>
<Attribute name='firstname' value='Magnet'/>
<Attribute name='fullname' value='Magnet Mangentta'/>
<Attribute name='idmManager'/>
<Attribute name='lastname' value='Mangentta'/>
</Object>
</List>
</Attribute>
while the user has three resources.
when I use the getView method in form using following code
<invoke name='getView'>
<ref>:display.session</ref>
<concat><s>User:</s><ref>user.waveset.accountId</ref></concat>
<map>
<s>authorized</s>
<s>true</s>
<s>subject</s>
<s>configurator</s>
</map>
</invoke>
this time I m able to get the value resource attribute.
please give the solution how can I get the editable user view in Remediation Form so that I can change the attribute of resource.
Thanks,
Amiti got the solution there was one attribute on workflow
<Argument name='NoFetch' value='true'/>
remove this to false it will fetch all the resource attributes -
Pl/SQL Error ORA-00904 not showing in Oracle SQL Developer
Hi,
I am new to Oracle and the various development tools available.
Whilst using Oracle SQL Developer we have come across a scenario where a PL/SQL package does not compile, but only shows warnings in the compiler log.
The same packeage when compiled using PL/SQL Navigator shows a much more detailed list of errors, and highlights the real problem.
Why does Oracle SQL Developer not show the following error?
PL/SQL: ORA-00904: "SERIAL_LINE_ID": invalid identifier
Regards
AdrianThere are various settings you can give to messages. (eg, informational, warning, severe).
Tools-PL/SQL compiler options.
Normally, just the first 20 messages are displayed.
Either change code to get rid of warning messages, or change settings to ignore informational and warning messages.
P.S. There is a dedicated sqldeveloper forum where your question should really have been posted.
Edited by: Keith Jamieson on Mar 9, 2009 1:45 PM -
SQL 2005 Express will not start
Service just would not start after a reboot I have approximately 30 clients this has happened to basically out of the blue and they started happening approximately 6/17/2014. The SQL log and event log errrors are below. Uninstall reinstall only fails, switching
to local service account throws WMI Provider Error, Can't find object or property" [0x80092004]. The common issue seems to be a malware infection of Search Protect. Please advise before this gets worse. Thank you.
SQL 2005 wont start error logs
FallBack certificate initialization failed with error code: 1. 17190
TDSSNIClient initialization failed with error 0x80092004, status code 0x80. 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x1. 17182
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 17826
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems. 17120
The SQL Server (VSDOTNET) service terminated with service-specific error %%-2146885628. 7024
FallBack certificate initialization failed with error code: 1. 17190
INFO-Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate. 26017
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 17826
SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems. 17120
WMI Provider Error
"Can't find object or property" [0x80092004]
SQL Start up log
2014-06-26 09:18:54.83 Server Microsoft SQL Server 2005 - 9.00.5000.00 (Intel X86)
Dec 10 2010 10:56:29
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 6.1 (Build 7601: Service Pack 1)
2014-06-26 09:18:54.83 Server (c) 2005 Microsoft Corporation.
2014-06-26 09:18:54.83 Server All rights reserved.
2014-06-26 09:18:54.83 Server Server process ID is 2716.
2014-06-26 09:18:54.83 Server Authentication mode is MIXED.
2014-06-26 09:18:54.83 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2014-06-26 09:18:54.83 Server This instance of SQL Server last reported using a process ID of 4936 at 6/26/2014 9:13:53 AM (local) 6/26/2014 2:13:53 PM (UTC). This is an informational message only; no user action is required.
2014-06-26 09:18:54.83 Server Registry startup parameters:
2014-06-26 09:18:54.83 Server -d c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2014-06-26 09:18:54.83 Server -e c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2014-06-26 09:18:54.83 Server -l c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2014-06-26 09:18:54.84 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-26 09:18:54.84 Server Detected 2 CPUs. This is an informational message; no user action is required.
2014-06-26 09:18:54.94 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-26 09:18:54.95 Server Database mirroring has been enabled on this instance of SQL Server.
2014-06-26 09:18:54.96 spid4s Starting up database 'master'.
2014-06-26 09:18:55.11 spid4s SQL Trace ID 1 was started by login "sa".
2014-06-26 09:18:55.13 spid4s Starting up database 'mssqlsystemresource'.
2014-06-26 09:18:55.15 spid4s The resource database build version is 9.00.5000. This is an informational message only. No user action is required.
2014-06-26 09:18:55.32 Server Error: 17190, Severity: 16, State: 1.
2014-06-26 09:18:55.32 Server FallBack certificate initialization failed with error code: 1.
2014-06-26 09:18:55.32 spid4s Server name is '2UA1371VFY\VSDOTNET'. This is an informational message only. No user action is required.
2014-06-26 09:18:55.32 spid8s Starting up database 'model'.
2014-06-26 09:18:55.32 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-26 09:18:55.32 spid4s Starting up database 'msdb'.
2014-06-26 09:18:55.32 Server Error: 17182, Severity: 16, State: 1.
2014-06-26 09:18:55.32 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2014-06-26 09:18:55.32 Server Error: 17182, Severity: 16, State: 1.
2014-06-26 09:18:55.32 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2014-06-26 09:18:55.32 Server Error: 17826, Severity: 18, State: 3.
2014-06-26 09:18:55.32 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-26 09:18:55.33 Server Error: 17120, Severity: 16, State: 1.
2014-06-26 09:18:55.33 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
James BallThis is what I found by someone else;
I know it's probably too late to help with the original poster, but we had this same issue and nothing we tried resolved the problem. Finally, we opened a technical incident with Microsoft and this is the solution that we were provided:
Take backup of below registry key.
HKLM\SOFTWARE\Microsoft\Cryptography\MachineGuid This key should ideally have the GUID of the machine without curly braces, so {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} becomes xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
Then delete the braces.
Try to reboot and start the SQL service . If service don’t start then Uninstall and reinstall SQL.
The above solution worked on two separate machines exhibiting this problem.
Monday, June 30, 2014 3:03 PM
jawg
(Partner)
10 Point
James Ball -
Remote server view not showing folders or files
My customer uses Dw CS3 with XP SP3. Everything worked fine until their ISP changed their web server. After the change remote site view does not show folders or files although uploading to server works fine with Dw. If I try with Filezilla or any other FTP client everything works normaly. I'm no Dw expert just a sys.admin, but I don't know what settings I should try anymore. I tested this with dw cs 4 also and same problem there.
If I check the FTP LOG from dw it shows the file listing correctly and that I have rights to the folders and files.Do you know what changed on the FTP server? I would love to know what it is. And if you have been able to solve the issue, then we might be able to provide the steps to reproduce/prevent the problem to Adobe's bug report form.
I have had rather iffy experience with DW's FTP feature with various hosts through the years. Enough so that I only try out DW's FTP when I upgrade, and always resort to using a different FTP client. Although I tend to prefer FTP client software anyway, there are times when it would be convenient to use DW's features.
Mark A. Boyd
Keep-On-Learnin' :-)
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words. -
Who is right? Sql 2005 SSMS view of table or INFORMATION_SCHEMA?
We scripted an old sql 2005 table under Management Studio and got this:
CREATE TABLE [dbo].[TestTable](
[myId] [int] IDENTITY(1,1) NOT NULL,
[Item_#] [char](8) NOT NULL,
[Count] [smallint] NOT NULL,
[ProductName] [char](45) NOT NULL,
[U_Item_#] AS (upper([Item_#])),
Notice that U_Item_# computed column appears in the 5th ordinal position from the top.
Next I ran this query:
select table_ProductName, column_ProductName, ordinal_position
From INFORMATION_SCHEMA.COLUMNS
where table_ProductName = 'TestTable'
Results returned:
table_Name column_Name ordinal_position
TestTable myId 1
TestTable Item_# 2
TestTable U_Item_# 3
TestTable Count 4
TestTable ProductName 5
TestTable U_ProductName 6
Notice that U_Item_# is now in ordinal positon 3 which is not the same as that returned by the script.
Which one is to be believed? (SSMS or INFORMATION_SCHEMA.COLUMNS)
TIA,
edm2This is what I got in SQL Server 2014, same as CREATE TABLE:
select table_name, column_name, ordinal_position
From INFORMATION_SCHEMA.COLUMNS
where table_name = 'TestTable'
TABLE_NAME COLUMN_NAME ORDINAL_POSITION
TestTable myId 1
TestTable Item_# 2
TestTable Count 3
TestTable ProductName 4
TestTable U_Item_# 5
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012
Maybe you are looking for
-
i need to transfer the new site i made in iweb through fetch. i know that i should replace the index.htm file in fetch with the new iweb index.htm file. but somehow, i cannot remember where i should get the index file... i have an iweb folder under m
-
How do i remove my e mail address from my i message
Can anyone tell me how I can remove my e mail address from my i mail, was notified by friends that everytime I i mail them my full e mail address shows instead of my name as usual????? Hope somebody can help
-
Can I play home video on my ipod touch?
Can I play home video on my ipod touch?
-
How to change airport settings in safe boot mode ?
At the moment my new macmini boots only in safe mode. I think its because of a faulty airport. Unfortunately, the safe mode does not offer a GUI for disabling airport for normal boot. The Apple Support page says "2. Remove the AirPort Extreme Card" b
-
How do I set up MMS for my Z 10?
How do I set up MMS for my Z 10?