MS SQL 2005 not recognize the tape drive?

I have a SQL 2005 Server (SP1) running on Windows 2003 server machine. Now windows can detect the tape drive attached to the system as 'HP StorageWorks DLT VS160'. Even 'ntbackup' detects it and is able to backup data to the tape drive. However, SQL Server is unable to detect the tape drive. The tape does not show up in the Backup Devices in Server Objects and hence I'm unable to take backups directly to the tape via SQL Server. How do I get SQL 2005 to recognize the tape drive?

Hi,
I dont know if you trying to install new tape drive or old.
If its new, thn after installing Tape driver restart your server(tape should be online with correct light indication).
Then goto mycomputer->properties and under removable drives it should show your tape drives with name.
Second you can download the campatible HP tool from HP website, install and run.
It will tell you almost everything about your drives and you can upgrade tape firmware too.
Make sure you stop SAP service before running HP tool as it may restart your server too with blue screen or dump.
So be very sure about compatibility of the tool.
Regards
Mani

Similar Messages

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

T60 hard drive replacement - Windows does not recognize the hard drive

Hello All, new to the Lenovo Community. I have a T60 as well as newer Lenovo Edge. The HD crashed on the T60 and it will no longer boot. I just purchased a WD 500GB without doing a lot of research. In trying to install Windows 7 (I had already upgraded the T60) it will not recognize the new drive - Windows does not see the drive at all. Is there a way to get the Lenovo to recognize the WD drive? Thank you in advance for any help.
Solved!
Go to Solution.

Glad I was able to help.
Just be careful, the usual "if it doesn't fit, find a bigger hammer" doesn't apply to this model laptop.
Also, there is a part available to adjust the frustration level, I don't happen to have the FRU number available, but I do have a photo and I'm sure you can find a local shop to provide it. Any experienced vendor should be able to match up a similar item from this photo.
It comes in many varieties, this model has a handy extention to aid in installation so you can easily do it with one hand. Others may require two hands to safely install. Use care when installing, one slip can destroy your laptop. Acute abuse can lead to severe embarassing situations and cronic abuse can have impact on your health, so use wisely and always get a spare to share with a friend. They tend ot come conviently packaged in quantity of 6, so you can invite a few friends over.
This invention has saved many a laptop from sailing out of windows worldwide.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Windows dvd maker does not recognize the dvd drive in this computer

I have windows 7 release candidate on my old desktop and this newish notebook. Windows DVD maker works fine on the desktop but on this Lenovo 3000 N200 it will not recognize the built in dvd drive. I have checked with Device Manager and the software is up to date and the device is working normally. I can make DVD movies using a free program called DVD Flick. DVD Flick recognizes the DVD burner, so why won't Windows DVD Maker work??

Hi Ppprrrggg,
The following information was copied from Troubleshoot problems with creating a DVD-Video using Windows DVD Maker
My DVD failed to burn. What can I do?
Try one or more of the following:
Verify that the DVD burner is connected properly to your computer and powered on, and that any necessary software drivers for the DVD burner are installed. You can check your hardware settings in the Device Manager by doing the following:
1.
Click Start, and then click Control Panel.
2.
Click Hardware and Sound.
3.
Click Device Manager.
Make sure that the videos you're trying to burn are not corrupted. To see whether the videos you want to burn are corrupted, try playing or viewing them using Windows Media Player. If the files don't play using the Player, Windows DVD Maker cannot burn them.
Choose a slower burning speed for your DVD burner by doing the following:
1.
Return to the Add pictures and video to the DVD page, and then click Options.
2.
In the DVD burner speed box, select Medium or Slow.
Does it work?
Thanks .
I uninstalled DVD Flick and followed the steps above but no luck.....any other ideas??? Apart from the fact that Windows DVD Maker SHOULD work I find it extra annoying because I think it is a very good program....it's better than DVD Flick, and besides not wanting to fork out money I would prefer to have nothing to do with programs like Nero.
Hi,
When you click DVD Maker-what exactly happens?Or what kind of error is?
when i click dvd
when I click dvd burner I select videos 2 burn.....videos I can watch on windows media player. After selecting the slowest burn speed I click on ''burn'' just like I do on my 7 year old desktop (which will then burn a dvd movie). But on this notebook I get a little window......''windows dvd maker''. It reads ''dvd burner not found. A dvd burner was not found. Make sure a dvd burner is connected and installed then try again.'' How useless is that???!!! I find it hard to believe this problem cannot be solved. Also I don't believe I can make the problem any clearer!!! Windows has no problem finding the dvd drive if I want to burn a data dvd so how come I can't burn a dvd movie using windows??? please help!!!!!

Windows 7 will not recognize the dvd drive in my dv9925nr

Windows will not recognize my dvd drive in Windows 7. It shows up under device manager under cd drives, but will not list in in my computer and will not recognize it as a drive in burning applications.

I haven't installed and started testing the BETA yet, just downloading from MS tonight.I would suspect upper & lower filters,since that is the most common cause of cd/dvd problems from XP-Vista.
http://support.microsoft.com/default.aspx/kb/929461
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Windows Vista will not recognize the dvd drive in my Mac Pro

After running windows updates, Windows Vista can no longer find the drivers for the dvd drive. Any suggestions?

Thank goodness for restore points. That was all I needed to do (system repair, do you want to restore to last check point) to be up and running.
I found my problem documented as an issue with Samsung SATA + Windows 7, and my X58. Curious, as moving a working system from one motherboard to another would always end up with Samsung SATA DVD not working, but LG is fine... so looks like time to buy another SATA DVD.
This from /technet.microsoft.com exactly describes the issue:
*CD/DVDRW from TSSTCorp (Samsung) drive, after install W7 without any problem not recognized...* | Modified on 9/9/2009 4:48 PM by lmarcelo
CD/DVD/rw do not respond on the Windows 7 Professional RC 32 bit, I have an Intel G35 desktop board, and 2.3 Ghz. CPU Intel Dual-Core 2, with sata optical drive. (From Samsung) Works fine in the raw clean install, but after the second reboot in the device manager appears with a yellow triangle, so I can't read nor write any CD or DVD.
I did this several times, (Format and install), even with a new CD drive, but it's always the same. Using a 160 Gb. WD hard disk, and alternated with a 400 Gb Samsung Sata HD make no difference at all.
Problem: Can't do anything with CD-DVD drive. (Messagge in the Device System General tab Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)).
By the way, this configuration was working fine in XP Pro. SP3. Any hint? clue? same problem? any one?
http://technet.microsoft.com/en-us/library/dd349347%28WS.10%29.aspx

At the urging of an Apple Store employee, I upgraded to OS Lion X. However, Excel does not recognize the hard drive and I cannot save any work. I understand there is a small compatibility issue - any suggestions ?

I need some direction on fixing an issue with excel and lion x which has a compatibility issue - can't save my work to a hard drive.

If you made a backup before installing lion, now would be a good time to restore that backup.... Ok, well you can always boot into lion recovery menu.... shut down your mac, hold down the option key and restart your computer..... Select recovery from the disk startup menu and go to disk utility... select the OSX disk, you can try repairing your permissions and repairing the disk.... If you lucky enough, it will fix it.... If not, and you have a decent internet connection, click the reinstall LION OSX after exiting disk utility. Your mac will now REDOWNLOAD LION OSX and reinstall it.... did you happen to make a backup before?
Also, did your mac originally have Leopard? Just curious... Because LION is entirely 64bit now where as Snow leopard had support for 32 bit as well, but the problem may be that some of your older apps where 32 bit.... This is just a guess though I'm not sure.... Because I've had numerous problems and crashes with my CS 4 stuff and final cut pro 7 and aperature.... Not sure if it's totally related to the whole 64 bit thing, but the thing is that the crashes are only occuring on my 32 bit apps.... otherwise the computer runs great.... To remedy, I had previously made an OSX lion USB drive so that I could do a fresh install of LION. I backed up all my data and files, installed a new SSD and my Macbook is SCREAAAAAAMING fast.... Sorry about the gloating but I'm sure we'll get to the bottom of your problem....

IMac 400dv will not recognize new hard drive installed

Hi,
I had been having trouble with my iMac 400dv's hard drive. I had posted the problems I was having and had gotten some very nice feedback. The final decision was to install a new hard drive and battery.
I purchased a refurbished 40GB Maxtor to replace my old 20GB. Installation was no problem except that my iMac will not recognize the new drive. If I reinstall the old one, it recognizes it right away, so I know it has been installed correctly.
I took the new hard drive back to the store and the tech said that it wasn't set on the "Master" position. He set it and tested the drive and said that it was fine. I reinstalled and get the same result, no drive can be sellected to install the software. No matter where I set the pin, I get the same result. I called the phone help line (MicroCenter) and the new tech told me that the drive was too big for my mac, which makes no sense to me since they suggested I buy a 100GB in the 1st place.
I have 1GB of memory, my installation disk if for 8.6 and I will bring it up to 9.2 if I can get it running again.
Any suggestions?
thanks,
Lucy

Lucy Rust...
In my opinion no Macintosh user should attempt to install a refurbished HD under any condition. Especially any HD that is to be bootable as they are no longer reliable for the Mac.
Master setting is a must for the HD and never tinker with an optical setting. Well, if you could mess with the optical setting, expect to do some micro-surgery.
You should be good for a HD up to a capacity of 120GB. The threshold is somewhere around 137GB but you will not find such odd capacity on the market.
I think the rest has been covered.
...Ron

Windows 7 in bootcamp does not recognize the wifi and usb

i have just made the bootcamp with Win7. it does not recognize the wireless driver and the high resoltion screen.
plus every time i have set the right click of trackpad.
could any one help me in solving this issue?
is there any way to upgrade the bootcamp driver from 3.0 to 3.3 without passing through 3.1 and 3.2?

You might wan't to ask in the Boot Camp forum where the Boot Camp gurus hang out.
https://discussions.apple.com/community/windows_software/boot_camp
It sounds like you have not yet completed the Windows installation process by installing the Windows drivers.

Help my system wont recognize the cd drive at all

Originally running os 8.1 now running 9.2.2 Will Start fine but does not recognize the cd drive. Someone gave me help a few years ago with this and I lost the post. Please help me get my system to recognize the cd drive. thanks

Boot from your system install cd (the one that originally came w/your comp) while holding down the c key & run Disk First Aid from the Utilities folder. Have DFA repair any errors it finds. If unable to repair you will need to run a 3rd party utility cd.
Utilities are best run from the CDs to avoid system interference & false readings/reports.
You must use the versions that are compatible w/your OS system & keep the utilities updated to avoid damaging/harming/trashing your system.
You need to make your own decision on which to purchase. Read up on them on their websites because each do something a little different.
Techtool Pro
[email protected]
DiskWarrior (Highly Recommended for Directory Damage Repair)
[email protected]
PlusOptimizer defragmenting and optimizing utility
[email protected]
Norton Utilities
Free General questions Customer Service-toll free (US & Canada) 1-800-441-7234
(Symantec is removing Norton Utilites off the market if not already done)

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I a

I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.
Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there. I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
Thnaks, for anyones ideas on how I can get this working again.....

First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme).
Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. Help.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

HT1918 I have changed my new apple email address at the itunes store but when I try to buy an app on my iPad my old apple id (email) comes up and will not recognize the password. How do I change this? I tried going in through settings/tapping apple ID to

I have changed my Apple ID when I got a new email address and confirmed it. However when I go to my iPad to buy an app my old Apple ID comes up and will not recognize the password. I tried going into the settings on my iPad and tapping on the old Apple ID to go in to change it but it will not recognize it and I cannot get in on the iPad to change it. How do I change this ID on my iPad for the iTunes store?
Jaylsworth

How did you fix this??

So I formatted a brand new hard drive to MAC OS (Journal), I then could save on the hard drive. Not two days later Im back at square one, the program wont recognize the hard drive again.

So, hard to beleive, but I am having some trouble with Final Cut Pro X.
This last week I formatted a brand new hard drive to MAC OS (Journal),
so that I could save on that hard drive.
Well it went great.
I saved my project on there and copied a few others over as to free up space on my Laptop.
Then, not two days later Im back at square one,
the program wont recognize the hard drive.
It wont even open the events up off my hard drive,
as to jog the program into reqcognizing the scratch disk (which worked twice before).
What happened?
How do I get the program to re-recongize my newly formatted hard drive?
Please help!

The name of the drive, or the name of some folders inside the drive, may fool FCP X into believing it is a camera.
Also, you should not use the drive for time machine backups.

I am using an epson projector to present images downloaded to a thumb drive. I renames the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2

I am using an epson projector to present images downloaded to a thumb drive. I rename the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2 ... 10,11 etc. How can I export and rename starting with 001?

The projector may actually be processing a 3 digit number in numerical sequence. Have you tried your export/collection in order sequence starting with 101? Assuming you have fewer than 899 images you should be OK. (I had to fiddle with export sequence for a display frame which used the file date and time for sequence!)

MS SQL 2005 not recognize the tape drive?

Similar Messages

Maybe you are looking for