MS SQL Server and OWB

Hello All,
SQL Server is on Windows and our target warehouse is on Unix.
Now i want to use Hetrogenous Service of oracle to pull data which requires me to connect to system dsn. Now i create a system dsn in windows. How should the HS_FDS_CONNECT_INFO parameter value be set to point it MS SQL server running on windows system.
Regards,
Ron.

BalusC wrote:
"Connection refused" roughly means that the remote server is not accessible on the specified port.
Check the correctness of the port and check if there isn't a firewall/proxy running which blocks that port.What I don't understand about the error messages, and so thought it must be related to MS SQL, rather tthan connections in general, is the phrase actively refused that he used. I take that to menat that the DB accepted a connection attempt, then, after attempting to authenticate, cut it off. But its probably just a misrepresentation of the error message on his part.
Specific MS SQL information, I don't know though.

Similar Messages

Connect to MS SQL server from OWB on Linux platform

Hi,
I want to connect to MS SQL server through OWB, on Linux platform.
I suppose I would use JDBC driver, and Heterogeneous services. Is that possible?
I did not see anything on JDBC driver for MS SQL server for Linux platform from Oracle.
Also, I was wondering is Oracle Gateway 10g for Linux a way to connect to MSSQL server?
Any leads would be appreciated.
Thanks
Ani

Hi,
This quite an actual topic for myself, so I decided to take some time to collect some information.
Start at:
* Oracle Generic Connectivity and Oracle Transparent Gateway - http://www.oracle.com/technology/products/gateways/gateways_fov.html
You can use the free Heterogenous Services component named Generic Connectivity for connecting to SqlServer over ODBC. You will need to find (or purchase?) a third-party ODBC driver for SqlServer for Linux, e.g. from www.datadirect.com. Setting this up will allow you to define a databaselink to the SqlServer. Open Gateways implements a limited set of the oracle SQL, so you will have to find out what is possible and what not.
See also:
* How To Setup HSODBC on Linux - https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=264567.1
* Generic Connectivity Available on Linux x86 with 10g - https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=261726.1
You can also use the Transparent Gateway for SqlServer (HS), which is about EURO 12000 per computer(!). This gives you a full implementation of Oracle SQL and you can access the SqlServer like it was Oracle.
You can also install Microsofts JDBC drivers into Oracle's JVM, and connect through JDBC to SqlServer. This is however not supported by Oracle, but it will work. See:
* What is required for a Java Stored Procedure to connect to a SQL Server Database? - https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=276167.1
See also:
* Options for Connecting to Foreign Data Stores and Non-Oracle Databases - https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=233876.1
* JDBC Developer's Guide - http://download-west.oracle.com/docs/cd/B14117_01/java.101/b10979/overvw.htm
Good luck, Erik Ykema

Problems when trying to import metadata from SQL server using OWB

Hi,
We are using Oracle 11.2 EE on AIX and OWB: 11.2. We are in the process testing Oracle Transparent gateway for SQL Server and have installed and configured it on a standalone windows server. We and have run the ORACLE_HOME\dg4msql\admin\dg4msql_cvw.sql on SQL Server side, in order to query the SQL-Server data dictionary. We have created a DB-link and can pull data correctly without any problems. When trying to import metadata in OWB Client on win xp, we have created a non-oracle SQL Server Module and are able to connect and start the import, but the displayed table names look strange and can not be imported. In front of every letter there is a square box, so instead of ADDRESS (the address table in the source system) , it reads "squarebox"A"squarebox"D"squarebox"D"squarebox"R"squarebox"E"squarebox"S"squarebox"S and subsequently the import fails with :API0413: Illegal name [<tablename>] Name with preceding and trailing spaces is not allowed.
The gateway have been configured with the following parameters:
HS_FDS_CONNECT_INFO=<connect string>
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252
Any ideas ?
This topic has been posted in the Heterogenious Forum as well, but as the problem is within OWB, I also post it here.
Thanks in advance!
Henrik
Edited by: he**** on Nov 15, 2011 1:29 PM

Henrik,
I've found other problems where OWB adds a space between all characters returned from SQL*Server which is what is happening in your case, although it is being displayed as a square box.
In one of these cases the problem was fixed by using the 11.2.0.2 OWB so would it be possible for you to try with that version ?
Also, as the problem is not with the gateway itself as you can select successfully using a database link then it would be better to follow up in the OWB forum -
Forum: Warehouse Builder
Warehouse Builder
as they will be able to help with the OWB side of the problem.
Regards,
Mike

Need Guide to create a table in SQL Server and Process data for JDBC

Dear All,
Scenario:JDBC to JDBC
I need to practice JDBC to JDBC scenario and for that i need to create a table in SQL server for sender ,receiver and update i have installed SQL Server and no idea about creation of table and Connection string for PI.
I want you to explain each and every step for the Table Creation ,Driver and connection string.
Thanks in Advance.

Try searchin in the forum and then google. This forum is not for teaching the basics.
VJ

Entity Framework - Code First - Migration - How to access SQL Server and Oracle using the same context?

Hello,
I use Entity Framework code first approach.
My project is working fine with SQL Server. But, I want to access Oracle too. I want to switch SQL Server and Oracle in run time.
I am able to access Oracle using "Oracle.ManagedDataAccess.EntityFramework.dl" in a new project.
But, Is this possible to access SQL Server and Oracle in the same project.
Thanks,
Murugan

This should be possible with a Code-First workflow. In Code-First the database mapping layer is generated at runtime.
David
David http://blogs.msdn.com/b/dbrowne/

Getting List of SQL server and on selection of server get List of Databases using SMO

Hi,
I need to have functionality where I need to populate List of available SQL servers from local network, and when i select SQL server from list, get the list of Databases from that Server.
For this i referenced SQL SMO Dll's and placed two drop down, one lists Server names, and one lists Database names.
Dlls refered are:
Microsoft.SqlServer.ConnectionInfo.dll
Microsoft.SqlServer.Management.Sdk.Sfc.dll
Microsoft.SqlServer.Smo.dll
Microsoft.SqlServer.SqlClrProvider.dll
Microsoft.SqlServer.SqlEnum.dll
Above DLL's i have copied from SQL server SQL server 2008 installed location
C:\Program Files\Microsoft SQL Server\110\SDK\Assemblies
DLL version : 11.0.3000.0
Code i have used is:
private void MainForm_Load(object sender,
EventArgs e)
   DataTable dataTable = SmoApplication.EnumAvailableSqlServers(false);
   cmbServers.ValueMember = "Name";
   cmbServers.DataSource = dataTable;
//Now, load Databases on selection of Server combo box.
private void cmbServers_SelectedIndexChanged(object sender,
EventArgs e)
   cmbDatabases.Items.Clear();
   if (cmbServers.SelectedIndex != -1)
      string serverName = cmbServers.SelectedValue.ToString();
      Server server = new Server(serverName);
      try
         foreach (Database database in server.Databases)
            cmbDatabases.Items.Add(database.Name);
      catch (Exception ex)
         string exception = ex.Message;
It works where SQL server is installed, but in systems where no SQL server is installed, it is not working, it is not returning list of SQL server and so database list.
Query is> can you please help me in this regard, what i am missing here, do i need to install any client component to use this?, or anything else what i need to do to make this functionality work.
Thanks,
Hemal

Thanks Michael for replying.
I have gone through the reply, and the link on how to get the SMO library installed.
"To install the Client Tooks SDK without installing SQL Server, install Shared Management Objects from the SQL Server feature pack.
If you want to ensure that SQL Server Management Objects is installed on a computer that will run your application, you can use the Shared Management Objects .msi in the SQL Server feature pack."
I have few questions on "Shared Management Objects .msi"
Where do i get "Shared Management Objects .msi".
only installing this msi will install SMO?.
Can i ship this msi with my application installer?
do i need to install x86 on x86 system and x64 version of msi in x64 system, or x86 can work fine with both, my application
is x86 only.
Thanks,
Hemal

Different output of same query in SQL Server and Oracle

I have two tables table1 and table2
--table1 has two columns c1 int and c2 varchar. there are not constraints added in it. it has data as given below
c1     c2
6     d
5     j
102     g
4     g
103     f
3     h
501     j
1     g
601     n
2     m
--table2 has only one column c1 int. there are not constraints added in it. it has data as given below
c1
6
1
4
3
2
now when i run below given query in sql server and oracle it gives me different result
select *
from table1
     inner join (SELECT ROW_NUMBER() OVER (order by c1 ASC) AS c1 from table2) table2 on table2.c1=table1.c1
sql server output
c1     c2     c1
1     g     1
2     m     2
3     h     3
4     g     4
5     j     5
oracle output
C1 C2 C1
5 j 5
4 g 4
3 h 3
1 g 1
2 m 2
If you notice the first column in both output. It is sorted in sql server and not in oracle.
Why it is behaving differently in oracle? Is there any way I can solve this in oracle?
Thanks,
Jigs

It is NOT behaving "differently" in Oracle; you just haven't specified an order that you expect your results to be in, so you're going to get output in whatever order the database fancies displaying it (ie. no guarenteed order). This is an artifact of how the database chooses to put together the data, and different databases (or even datasets within the same database) can and most likely will behave differently.
Even SQL Server won't guarentee to always get your data in an ordered fashion if you exclude the order by clause, even if you think it has always output the data in an ordered fashion.
Your solution is to add an order by clause, in BOTH databases, to force the order of the output data.

SQL Server and Reporting Services

What is the best practice for replicating the same reports for different clients using different databases in the same SQL Server and Reporting Services?
For example:
Create a single database for each client.
Create a single data source in Reporting services for each client.
Create a folder in Reporting Service for each client, and replicate all the report and point each report to its correct data source.
Is there an easier method for this type of solution.

Hi acedenoBI,
According to your description, you have reports which has same structure for each user. Now you want to have a folder for each client to keep their reports. And each client should have a single database and single data source. Right?
In Reporting Service, if we need one data source to connect different database dynamically, we may need to use parameter and create dynamic connection string. However, in this scenario, since we need to have a single folder and data source for each
client, so we can just make copies of the whole project. Modify the Connection string in each data source, change the Initial Catalog to be the corresponding database for the client. This can be an easy way to meet the requirement.
If you have any feedback on our support, please click
here.
Best Regards,
Simon Hou

Extract the data from SQL Server and Import into Oracle

Hi,
I would like to run a daily job that will export the table data from SQL server table (it will be only one or two table) and Import back into Oracle table (it might one or two table tables).
Could you please guide me that how can i do this using either sql server or oracle?
We have oracle 9.2 and sql server 2005.
Normally i do from flat file which is generated by source destination nand i dump into oracle using sql*loader but this time I have to directly extract/export the data from MS Sql server and load into Oracle table, mostly it will reload so i might doing any massaging data during the load.
If you show me the detail approach, it will be really appreciated.
I have access to Sql server but i don't how to use sql server to do this or using oracle as a daily job even becuase have to schedule the job for this as it will be a daily job.
Thanks,
poratips

Unless you can find an open source ODBC driver for SQL Server that runs on Solaris (and I wouldn't be overly hopeful there) Heterogeneous Services would require that you license something-- a third party ODBC driver, a new Oracle instance, or an Oracle Transparent Gateway.
As I stated below, you could certainly use SQL Server's ETL tool, DTS. Oracle's ETL tools would require additional licensing since you're just on 9.2. You could also write a small application (Java or otherwise) that connected to both databases and transferred the data. If you're particularly enterprising, you could load the SQL Server Type 4 JDBC driver into Oracle's JVM and write a Java stored procedure that connected to the SQL Server database via JDBC, but that's a pretty convoluted approach.
Justin

Hi, I would like to know if is it possible to install windows on mac pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

hi, I would like to know if is it possible to install windows on macbook pro , because I need to have some application like SQL server and visual studio, and they could not be install on mac

Windows on a Mac

How to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)

I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?

please post you question on failover clusters in the cluster forum. THey will explain how this works and point you at scipts.
You should also look in the Gallery for cluster management scripts.
¯\_(ツ)_/¯

How to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster) with scrpiting

I have a scenario with the three nodes with server 2012 standard, each running an instance of SQL Server 2012 enterprise, participate in a
single Windows Server Failover Cluster (WSFC) that spans two data centers.
If the nodes in the primary data center are unavailable due to data center outage. Then how I can able to access node in the WSFC (Windows Server Failover Cluster) in the secondary disaster recovery data center automatically with some script.
I want to write script that can be able to check primary data center by pinging some IP after every 5 or 10 minutes.
If that IP is unable to respond then script can be able to Perform Forced Manual Failover of Availability Group (SQL Server) and WSFC (Windows Server Failover Cluster)
Can you please guide me for script writing for automatic failover in case of primary datacenter outage?

You are trying to implement manually what should be happening automatically in the cluster. If the primary SQL Server becomes unavailable in the data center, it should fail over to the secondary SQL Server automatically. Is that not working?
You also might want to run this configuration by some SQL experts. I am not a SQL expert, but if you have both hosts in the data center in a cluster, there is no need for replication between those two nodes as they would be accessing
the database from some form of shared storage. Then it looks like you are trying to implement Always On to the DR site. I'm not sure you can mix both types of failover in a single configuration.
FYI, it would make more sense to establish a file share witness in your DR site instead of placing a third node in the data center for Node Majority quorum.
. : | : . : | : . tim

Error while connecting to SQL SERVER from OWB

HI All,
I got the following error while connecting to SQL SERVER from OWB(10gR2).
1). Created DSN with (GMSCADA)
2). tnsnames file is updated with the following information
GMSCADA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.60.29)(PORT = 1433))
(CONNECT_DATA =
(SERVICE_NAME = SA)
3). Tried to connect to SQL SERVER frm OWB
Username: sa
password: sa
host: 172.16.60.29
port: 1433
service name: GMSCADA
schema: sa
I got the following error, when I click Test Connection:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from OWB_3095
Regards,
Kumar.

Hi David,
What is Gateway, How I have to setup, Please let me know.
I tried according to the Demo, But still I am facing the same problem. Which system IP I have to put in the host details.
Can u please let me know.
Regards,
Kumar.

SQL Developer, SQL Server and the ampersand

Hello,
I am connected to a SQL Server database (2008) and am having difficulty getting a query to run properly in SQL Developer (3.1.07).
Simplified Example
select table_field
from table
where table_field <> 'This & That';
Expected results
table_field
Other stuff
Other stuff
Other stuff
Actual results
table_field
Other stuff
This & That
This & That
I cannot seem to get SQL Developer to recognize the & as a literal ampersand. I've tried escaping it numerous ways, but it always thinks it is a variable.
The query works exactly as expected in MS SQL Management Studio and Toad. Of course, I can just run it in one of those but I'd like to try to get this to work in SQL Developer. Suggestions?
Please let me know if I can provide further information. Thanks.

Hi,
SQL Developers worksheet is designed for Oracle, but we allow you to run statements against SQL Server and other non Oracle databases.
This can lead to some quirks, like the one you experienced.
Oracles SQL*Plus uses ampersand to define substitution variables.
Oracle SQL Developer has implemented the same concept.
Unfortunately this does not make sense when running something against a non Oracle database.
As a workaround, you can run the following SQL*Plus command in SQL Developer, before your SQL Server query.
SET DEFINE OFF;
select 'hello & goodbye';
The following maybe of some help as well.
http://dermotoneill.blogspot.com/2010/11/workheet-hints.html
http://dermotoneill.blogspot.com/2010/12/sql-server-and-sybase-browsing.html
Regards,
Dermot.
SQL Developer Team.

Does Oracle have Extended Stored Procedure like SQL Server and Sybase?

Hi, i am new to Oracle. I want to know if...
Does Oracle have Extended Stored Procedure like SQL Server and Sybase?
If it does not have, then how can i call outside program written in C or JAVA from the Database stored procedure or trigger?

refer to this link on external procedures
http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/manproc.htm#11064

MS SQL Server and OWB

Similar Messages

Maybe you are looking for