MS-SQL Template is getting assigned automatically after System Reboot.

Greetings, We have currently unassigned templates for MS-SQL Servers in Solution Manager Technical Monitoring for all technical systems as we don't want to monitor the DB Alerts. However, What we see is that after every OS reboot or DB Connectivity failure, for few technical systems the MS-SQL template is getting assigned automatically. If not assigned, it will start referring to SAP original template for metrics. I was unable to find any SAP note to fix this issue. Is there anything we could do to stop this? Please let me know if there is anything we could try.. Thank you, Haseeb Ahmed.

Hi,
I tested and noticed that the following registry key will be changed when modify paging file size:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
value name:PagingFiles
Please change the paging file size again and check if the key is edited correctly. Reboot and see if the value is changed back to empty.
If issue still exists, please let us know if there is any third party app installed on server such as antivirus program, disk management program etc. I saw similar issues caused by third party application.
If you have any feedback on our support, please send to [email protected]

Similar Messages

Purchase order output type NEU is not get assigned automatically

Dear All,
when i am creting purchase order the output type NEU is not get assigned automatically.
I have maintained message condn record for NEU and for specific PO doc type NB.
same problame i was facing for the inventory docuemnts but i was resolved by running one SAP std program so please guide me if any such program is available for Purchasing documents also or any other setting i am missing to make.
Pl suggest
Regards,
Vimlesh

Hi
Please check the following in customization.Dont check in NACE you may miss something like fine tune control
1) Check the Message determination procedure is having the NEU output type
2) Check the std Message determination procedure is assigned to PO
3) Check the output type for the Access sequence, default data for transmission medium and partner function VN, Language & Form assigned to it
4) Check the Access sequence for the condition tables
5) Check the condition record in MN04/MN05
6) Check the purchasing group has printer assignement
7) Check the fine tuen control for operation 1 & 2 for message type.
Hope your problem now solved.
Thanks /karthik
Edited by: Karthik on Aug 13, 2009 5:29 PM

Maint order should get TECO automatically after final Confirmation

Hi Gurus,
My customer requirement is that, Maint order should get TECO automatically after final Confirmation (in IW41) of last operation. Is it possible? If yes, plz let me know the steps which I need to do.
Thanks in Advanceu2026
Amol.

Hi,
This functionality is not available in std. SAP. You may go for enhancement. please check the following user exits for achieving your requirement.
CONFPM05 PM/SM order conf.: Cust. specific enhancements when saving
IWO10009 PM Order: Customer Check for 'Save' Event
Praveen

Emails get deleted automatically after 2 weeks

My emails are getting deleted automatically after 2 weeks. I have important emails that I cannot retrieve. I changed setting to never delete but it keeps deleting. Also I called about the issue and It was never fixed. I cannot be loosing emails. Especially that this is an email address that everyone knows for me.

Do you have the account enabled on more than one device or computer? If so, the retention settings on that other device will override the settings in Comcast preferences.

How could the wireless ethernet card running automatic when system reboot?

I have already setup the wireless networking card correctly which name is wpi0,but every time when I use it to link to internet,
I had to key the instuction like this :
ifconfig wpi0 plumb
ifconfig wpi0 up
ifconfig wpi0 dhcp
and then input:
wificonfig -i wpi0 connect mywifi
comment: mywifi is the profile file of connection to my wireless router
I had set it with the instruction before like thisi
wificonfig createprofile mywifi essid=2WIRE678 encryption=wep wepkey1=1234567890
anybody can help me group up the command line and has it running automatic when system reboot
it seems the wireless card always need manual connect to router, that 's trouble.

It should connect on it's own. Which version of Solaris are you using?
If worse comes to worse just drop all of your commands into a simple script and then run that script as part of your .profile or equivalent.
alan

Anything that I copy on my desktop gets deleted automatically after a few seconds. Any idea what is going on ?

I have a problem with my MBP.
One day something weird started happening. Every time I would copy / save / download something on my desktop it got deleted automatically after a few seconds. On very very rare occasions this would not happen.
This has been going on for 3 months now and I haven't found any sollution. The last option is to format and reinstall Lion but I hope there is a faster/better solution than that.
I have a 2011 15-inch MBP with the up-to-date Mac OS X Lion.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/com\.apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, steps 1-4 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Why SO Header not get closed automatically after all SO lines get closed?

Hi all :
Do you know the reason, why some SO Header still as Booked Status, even All the SO lines are already closed ?
If I see the Workflow status the SO Header is in Status = Deferred and Activity = Wait
And I can close it manually if I rewind the Activity in the Workflow, but I want to know why the SOs not get closed automatically.
Thank you in advance
Edited by: Daniel on Jan 18, 2011 8:41 AM

Have you scheduled the concurrent request to use Workflow Background Processor to Process OEOH ? What is the frequency? Has it run after the lines got closed?
Also, check the value of the WAIT attribute in the OEOH workflow? By default, it is set to close headers at the end of month.
For more detail please see Note:141919.1 on Metalink.
Also refer to metalink document # 397364.1 which details how to change the WAIT attributes.
Hope this helps,
Sandeep Gandhi

How clusterware restarts on automatically after server reboot in 11g R2

Hi,
I would like to know how the cluster restarts on automatically after the server reboot in 11g R2 RAC . The oracle restart feature in 11g R2 help to restart the components like databases, ASM in case of abnormal failure. But how the clusterware starts on own after the server reboot? can you share any documents or notes is really appreciated.
Thanks,
Robin.

At Grid Infrastructure installation time system configuration is modified so that UNIX init daemon restarts OHASD: http://docs.oracle.com/cd/E11882_01/rac.112/e16794/intro.htm#BABIDEFI. For example with Oracle Linux 5 and Oracle RAC 11.2.0.1 you have following line in /etc/inittab:
h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/nulland:
[root@rac1 ~]# head /etc/init.d/init.ohasd
#!/bin/sh
# Copyright (c) 2001, 2009, Oracle and/or its affiliates. All rights reserved.
# init.ohasd - Control script for the Oracle HA services daemon
# This script is invoked by the init system
ORA_CRS_HOME=/u01/app/11.2.0/grid
export ORA_CRS_HOMEEdited by: P. Forstmann on 11 févr. 2013 18:45

Help needed - Can't access OneKey Recovery restoration option after system reboot,

Hi,
I run OneKey Recovery, after I choose "recovery", and system reboot.....system automatically log in Windows 7 again, rather than access OneKey Recovery restoration option.
I am using G570 and OneKey Recovery version is 7. this issue never happened before, it always reboot to OneKey Recovery restoration before....please help. Thanks

You shouldn't need Command + R since the Option key will present you with the Recovery boot volume. Seems something is amiss there, I'm willing to bet you may have been using a wireless keyboard.

Workgroup setting won't stay after system reboot

Even though this issue was reported in 10.7, the issue still remains in 10.8.
Background:
I have a home network consisting of a iMac (2011) and two Windows 7 PCS connected to a Netgear Gigabit switch. I on occasion transfer files to and from my Mac and my Windows PCs.
Pre OSX Lion, This situation worked fine. But since Lion and now Mountain Lion I am no longer able to copy files to my Mac from my Windows Pcs. Copying files from my Mac to my Windows Pcs work fine. In troubleshooting this issue, I found out in the Network system preference option after selecting ethernet and then the advanced button, then clicking on the Wins tab, that the Netbois and Workgroup fields are blank. After providing a Netbois name and the workgroup name the same as the Windows Pcs, then selecting the OK button generally works. Sometimes I have to go in multiple times before it takes the information but once it does everything works as it suppose until I reboot or shutdown and startup. If I do either when I go back into the Network in the System Preferences the fields are blank again.
I've followed some of the suggestions from the other support documents but they did not work for me:
1. Deleting the com.apple.systemperference.plist file and .lockfile
2. Create a duplicate ethernet service add the necessary changes then make that ethernet service the active one after disabling the original one.
None of these worked. I submitted on Apple Feedback this issue when I was still running OSX 10.7.2 but it never was fixed and now Mountain Lion behaves the same way. I will be submitting once again in hopes someone at Apple pays attention.
It seems this issue has to do with the Apple inhouse developed SMB share implementation. When they was using the SAMBA software I had no issues.
I even did a clean install of Mountain Lion to make sure the problem would not be transferred from Lion. Didn't make a difference.
Any help would be appreciated.

Thanks,
That work around is great. A lot easier that typing in the info repeated before it takes just to have to do it again after the next reboot. If anyone has access to the Apple Bug Reporter, please add this bug for all of our sakes.
Two things.
1. After the initial ML install, the word workgroup was in the workgroup field. And that did not disappear after each reboot. Only when changing it to something else is when the problem manifests.
2. I wonder if the Macbook Air and The new Retina Macbook Pro has this same issue being that they too come with SSD styled storage. If anyone have these macs please reply with your findings.
Thanks
p.s. Again would really appreciate someone with Apple Bug Reporter access to log this issue. Thanks again

ATP Tree Structure is not getting created automatically after Sales Order is saved

In one one of our scenario, when we add material to Sales Order and save with Requirement Type(under Procurrement Tab of Sales Order) , in APO there is no planned order or only planned order which is dynamically pegged created because the ATP Tree in APO is not being converted. There is no pegging relevant item create(e.g. Planned Order). When we are checking the persistent ATP Trees in APO (/SAPAPO/ATREE_DSP - ATP-Trees) we can see that they are not converted automatically. They are still there. If we do it manually via transaction (/SAPAPO/RRP_ATP2PPDS - Conversion ATP Tree Structures -> Production Planning) it works. Afterwards the Planned Order is available and fixed pegged.
Why is APO not converting the ATP tree automatically ?
I also checked the scheduling horizon for conversion of the ATP Tree and it is correct: Is there any relation with Check Mode setting under ATP tab in Material Master?

Hi Prasad ,
This enables you to debug the ATP tree . If you have created an entry here with your user name then it will not let ATP tree get converted into PP/DS orders automatically .
It's very surprising because all seems fine . Just cross check all the settings once with below .
The conversion time depends on the following horizons and dates:
· PP/DS Horizon
· Scheduling horizon for the conversion of ATP tree structures
· Requirements dates in the ATP tree structure
PP/DS immediately converts the ATP tree structure when the sales order is saved
· If the earliest requirements date for components is within the scheduling horizon or
· If the latest requirements date for finished products is within the PP/DS horizon
If none of these conditions are fulfilled when saving the sales order, the system saves the ATP tree structure in SAP APO. In this case you can only convert the ATP tree structure online or in the background when one of the conditions given above is fulfilled. Here, there is an offset for the horizons with which you can achieve an earlier conversion.
You maintain the scheduling horizon for the conversion of ATP tree structures in Customizing for Production Planning and Detailed Scheduling under Maintain Global Parameters and Defaults. You maintain a location product specific PP/DS horizon in the location product master. If no location product specific PP/DS horizon exists, the system uses the PP/DS horizon from the planning version. You maintain these in Model and Planning Version Management.
Love Singh

Capped zones not getting discovered automatically after global zone discovr

On solaris 10.
We have global zones with capped and uncapped zones.
Zones which are uncapped getting discovered under global zone.
But zones which are capped are not getting discovered.
As per all documents:http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_zones_mgmt.htm
All the non-global zones in the selected global zone are automatically discovered
Edited by: vtadmin on Aug 25, 2012 9:46 PM

The most common reason this usually occurs is because the of the shared memory issue with the Sun MC database. Looks like this issue has been passed on to 4.0. Please try doing the following:
When installing a Server in a whole-root Zone, edit /etc/project to set the shared memory setting first.
Change the "default:3:::" entry to look like this:
default:3::::project.max-shm-memory=(privileged,1073741824,deny)
...where 1073741824 indicates a 1GB setting (you may tune it lower). For more details, go here:
http://docs.sun.com/app/docs/doc/819-5418/6n7gk6ilo?a=view
Mostly this is a problem in whole root zones, but sometimes also applies to the global zones.

AP Admin Status Getting Disabled Automatically After Upgrade to 7.4

Hi,
We were using wlan controller 5508 firmware 7.0.235 and decided to upgrade our firmware because we wanted to use some new AP models. We upgraded the controller to the 7.4.110.0 and after that a problem started. Some of the AP are becoming ADMIN DISABLED and they are getting down, this is happening all day and random times. I need to manually getting them admin enabled so we can use them. What can cause this problem?
This happens in APs in Flexconnect mode.
Regards.
Wlan Cont
AIR-CT5508-K9

Problem happens with these AP : AIR-LAP1041N-E-K9
We have many AP it is very difficult which AP to debug, everytime different AP is getting disabled. I've also configured syslog but also I do not receive any syslog message to my syslog server. Should I upgrade to 7.5?
Log from AP after disabled...
    Console logging: level debugging, 39 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level debugging, 0 messages logged, xml disabled,
                     filtering disabled
    Buffer logging: level debugging, 39 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled
    Trap logging: level emergencies, 12 message lines logged
        Logging to 10.0.2.47 (udp port 514, audit disabled,
              link down),
              0 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled
        Logging Source-Interface:       VRF Name:
Log Buffer (1048576 bytes):
*Mar 1 00:00:10.770: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:10.773: *** CRASH_LOG = YES
*Mar 1 00:00:11.073: Port 1 is not presentSecurity Core found.
Base Ethernet MAC address: D8:67:D9:FC:00:D6
*Mar 1 00:00:12.424: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:13.507: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:14.518: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:16.503: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 15.2(2)JB2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 29-Jul-13 12:06 by prod_rel_team
*Mar 1 00:00:16.503: %SNMP-5-COLDSTART: SNMP agent on host Antalya is undergoing a cold start
*Mar 1 00:00:16.570: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:17.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:28.630: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:00:28.632: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar 1 00:00:28.633: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:28.657: %CAPWAP-3-ERRORLOG: Binding Config Initialization failed for binding 1
*Mar 1 00:00:29.190: Starting Ethernet promiscuous mode
*Mar 1 00:00:29.396: %SSH-5-ENABLED: SSH 2.0 has been enabledlwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:44.681: Logging LWAPP message to 10.0.2.47.
*Mar 1 00:01:03.711: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:01:13.713: %CAPWAP-3-ERRORLOG: Selected MWAR 'COLINS-WLC'(index 0).
*Mar 1 00:01:13.713: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 21 08:32:29.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.10.10 peer_port: 5246
*Aug 21 08:32:30.063: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.10.10 peer_port: 5246
*Aug 21 08:32:30.063: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.10
*Aug 21 08:32:35.063: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.10
*Aug 21 08:32:35.154: Starting Ethernet promiscuous mode
*Aug 21 08:32:37.005: %LWAPP-4-CLIENTEVENTLOG: OfficeExtend Localssid saved in AP flash
*Aug 21 08:32:37.025: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Aug 21 08:32:37.224: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller COLINS-WLC
*Aug 21 08:32:37.273: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.275: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.275: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.276: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.279: ac_first_hop_mac - IP:192.168.31.1 Hop IP:192.168.31.1 IDB:BVI1
*Aug 21 08:32:37.279: Setting AC first hop MAC: 0024.14d9.f118
*Aug 21 08:32:37.965: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
*Aug 21 08:32:47.905: %CDP_PD-4-POWER_OK: Full power - LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED inline power source

Exchande mailbox database is not getting mounted automatically after server is up

Hi,
Our exchange server is configured as follows:
- DAG with two Exchange Mail box servers member.
- Each server is mounted to mailbox database(m1-db & m2-db respectively) and the replication is activated on both server
My question is when one of the server goes down , the other server will take over but after the second is back online, the database which reside on it is not mounted automatically and both dbs are showing healthy status.
To resolve this issue we have to activate it manually.
Is there any solution or configuration to be performed to make the mounting occurs automatically.
Regards

Does it happens to all the Database on that server?
What is the activation preference you have set?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

HT4901 My old calendar data gets deleted automatically after a few weeks. How do I stop this from happening?

why does the calendar data get deleted after a few weeks on the iPhone and the iPad and the Mac Pro?

On your iOS devices, go to Settings>Mail,Contacts,Calendars>Sync (in the Calendars section) and set this to All Events.
Not sure about your Mac. Try going to icloud.com, opening your calendar, clicking on the gear icon on the lower left and choose preferences, then on the Advanced tab make sure you haven't checked Hide Events next to Old Events.

MS-SQL Template is getting assigned automatically after System Reboot.

Similar Messages

Maybe you are looking for