MS updates download and installation problem.
I am using Windows Server 2008 R2 Standard. I saw four important updates available and when I'm trying to install those four updates it fails to install. I tried several attempts, but it failure. Except those four updates the remaining
have been successfully installed. I wonder what the problem was occurring?
The installation failure updates list are as below,
1. Security Update for Windows Server 2008 R2 x64 Edition (KB2871997)
2. Security Update for Windows Server 2008 R2 Edition (KB2872339)
3. Update for Windows Server 2008 R2 for x64-based Systems (KB2830477)
4. Update for Windows Server 2008 R2 x64 Edition (KB2882822)
Below is my MS updates installation error message,
Error(s) found: Code 80070005 Windows Update encountered an unknown error.
Can any one please assist me ASAP?
Thanks,
Tariq M.S.
On Mon, 16 Jun 2014 05:23:48 +0000, YaliInfo wrote:
Below is my MS updates installation error message,
Error(s) found: Code 80070005 Windows Update encountered an unknown error.
Can any one please assist me ASAP?
http://support.microsoft.com/kb/968003
Paul Adare - FIM CM MVP
The OSI seven-layer stack does not appear to have been invented by the
followers of Zen. A cornerstone of Zen is the focusing on reality and the
avoidance of misleading conceptual abstractions. -- Alex Gillespie
Similar Messages
-
FlashPlayer update downloads and installs but doesn't work!
WIN 7 64bit . . . followed the instructions -- downloaded Player 11 -- still can't get most videos from YouTube or Facebook to run, Still get the update notice or I get a black box with a no plarking symbol in the upper left . . . what's up . . . how can I make it work? I got a successful download and a message indicating it's installed.
Assuming IE9, see
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
Driver Download and Installation Problem
We have had a Photosmart Plus B209am for a few years. We have frequently updated the driver. Seemed like every time Microsoft updated Windows 7, we had to reinstall our HP software. Recently we have been unable to print wirelessly again. We have downloaded the recommended driver, but when it trys to install we get the message "file not detected". We have attempted to install from the original disc but receive the same message. We now are using the printer with a USB cable connection. We have found this product to be a royal pain. Suggestions for getting it to work wirelessly again? Thank you for your time.
Hello Lark815,
Welcome to the HP Support Forums! I understand after a Windows update went through you are now no longer able to connect wirelessly to your HP Photosmart B210. I would like you to uninstall the current HP software for the B210 you have on the computer, once you have removed the software I would like you to go ahead and run the HP Printer Install Wizard- it was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Please take a look here at Uninstalling a program in Windows 7. I found this informative video on the Microsoft Showcase Page.
Let me know if this was helpful, if you have any questions please feel free to ask!
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Adobe Creative Suite 6 Download and Installation Problem
I have purchases Adobe Creative Suite 6 and went to download it. It downloaded a Package.exe and when I ran setup it ran for hours and in the end said it was complete, but I have nothing to show for it but some Zip files and some setup files which I have run and still have nothing. What am I doing wrong?
run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html
restart your computer.
if there were no errors during the previous installation attempt, click setup.exe -
New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAMNew computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM -
I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
The additional content downloads and installs, but it won't show up in my Logic Pro X. I cannot find the "Library" folder where this additional content is downloaded to and can't seem to activate the new loops and instruments in my Logic Pro X (i.e. loops are still greyed out). Any solutions?
similar problem that I'm hoping revives this thread. Took over 24hrs to dload additional content (after another full day for the actual problem) due to a bad dload rate. so quitted, and relocated closer to my wifi router. Restart, open logic x, Menu bar: Logic Pro/ Download Additional content ...Tells me i have no internet connection.... Ahh... I do, I'm using it right now! Tried restarting and relaunching. same thing every time.
Any clues?
This whole apple upgrade has been so disappointing! All i wanted to do was reinstall logic 9! $2500 later and I'm still struggling. ***! -
tonight i have upgraded my Ipad2 to ios 6 by it's own wifi,after compete downloading and installation the wifi password is not accepted by ipad2,i have tested so many times and i entered password correctly.please help
are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>? -
Cant download and installation failed.
Dear expert im in troubles with my nokia 6600 s60v2 phone.The phones settings is from 02 mobile uk.Presently using in Bangladesh after having Bangladeshi sim and Gprs connection.The voice call is running well.When i goto download any jar,jad or sis file an error display as content type doesnt support,unable to install or service failed to perform operation.Finding this problem i formatted the phone.It is to be mentioned here that after formating the phone,the factory setting comes with 02 mobile uks settings.The firmware of phone is v 3.42.1 16.10.3 NHL 10.Bangladeshi sim and setting working but problem is with download and installation.Kindly help me as how can i make the phone like any setting less or asia specific.Upgrade of firmware can solve the problem or not.An early help is solicited.Regards,malaker
Any one please help me
-
SanDisk Clip Jam Firmware 1.03 Download and Installation Instructions
Firmware is the software code that powers your Clip Jam. You can think of it as the operating system. SanDisk actively and periodically updates the capabilities, functionality, and reliability of the Firmware. For an optimal experience with your Clip Jam, SanDisk recommends that you update your Firmware with each new release. It’s fast, easy, and free!
SanDisk has released firmware version 1.03 for the SanDisk Clip Jam. Download links and the release notes are available below.
SanDisk Clip Jam Firmware 1.03 Download and Installation instructions
Manual Firmware Update (All Regions) - Click here to download
All languages are now in one firmware version. After firmware update you will need to select your Language and Region preference.
• Remove any external card from the Clip Jam before performing firmware update
• Ensure your battery is > 50% full.
• Plug in your SanDisk Clip Jam to your computer.
• Download and save the upgrade.hex file linked above to a folder on your computer.
• Drag the file to the root directory of your SanDisk Clip Jam
• Disconnect the SanDisk Clip Jam and let the firmware update begin.
• Once it finishes doing its update, it will turn itself off.
• Turn the Clip Jam on, Select your language and region preference
• Once it is back to the main menu, head to "Settings" >"System Settings"> "Info", and verify the "Version" is now 1.03".this is the first shipping FW. there are no release notes for changes because this is the first release.
-
FAQ: Where can I get help with downloading and installation?
See this page for options for contacting Adobe regarding problems with downloading and installation:
"Contact support - download and installation"
You can ask questions and search for answers on the Adobe user-to-user forum dedicated to downloading, installation, and setup.
You can also check the Customer Service FAQ lists for issues with downloading and installation.
You can order Premiere Pro CS6 here ... or try it free for 30 days.Hello,
This kind of question is best asked in the Windows Forums, however I've had some succession with a similar issue myself.
Non-Genuine Windows means that it can't authenticate your copy of Windows.
It's not a problem, all your need is a genuine product key code. Provided you don't have different version of Windows 7 installed to the one you are buying (for example windows 7 Home Premium and Windows 7 business) Then you can use the new key code.
Click on the Start Button and type: CMD (into the 'Search programs and files' field in the Start Menu)
The Start Menu will show 'CMD.exe',
Right-click the CMD.exe file and select Run As Administrator.
In the CMD window, type: slmgr.vbs -ipk <type your product key here>
To activate windows after changing the key, type: slmgr.vbs -ato
It should now accept the new key code and you will need to be connected to the Internet to authenticate.
If by chance the windows 7 types are different (One is Home premium say and the other is Business) then you will need to uninstall that copy of Windows 7 and install the new one. If your using BootCamp then you will need to go into BootCamp under system preferences and remove that copy of Windows (delete it)
Then create a new setup with your new Windows 7 disk.
For me I had the same type of windows, changing the product code worked. Saved me the bother of having to reinstall Windows again and it was all genuine.
Best of luck -
Preventing the automatic download and installation of iOS 8
Once again this becomes an issue. How to prevent the automatic download and installation of iOS 8. Thanks.
Grrrrr. This needs a solution. I have a portable wifi account I use for teaching (mainly Apple devices) and when traveling. It updates my download capacity in 1gb chunks at $10 each. Just traveling at the moment, and this coincides with Apple updates. Three devices, @ 2 odd gb ea, all deciding to update while I drive. By the time I got the update notices from Optus, all three devices had downloaded the updates and were waiting for me to press install. I don't mind installing, but I don't want to pay $60 for the downloads thru this account. I think Apple owes me $60. There's no reason they can't set a restriction on this type of download for user nominated accounts. This is a significant issue for a lot of people. Please Apple,
-
I purchased PS Elements and Premier Elements through Academic Superstore as a download on Aug. 8, 2014. I am installing on a MAC Book Pro 10.9.4, and have tried reinstalling 3 times. I also searched the error messages on support and could not find the error I am getting. Every time I am able to open the Elements file will open and work, but the Premier file has a window pop up that says: The Following disk images couldn't be opened: Image - PremiereElements_12_WWEFDJ.dmg Reason - image not recognized. Does anyone have a solution?
PremiereElements_12_WWEFDJ.dmg is the installation file. http://www.ofzenandcomputing.com/how-to-install-dmg-files-mac/
if you're seeing that message when trying to install pre 12, you have a corrupt download. redownload:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Just completed the redemption process. Where's the download and installation files?
Just completed the redemption process. Where's the download and installation files?
Go to App Store > Purchases to check the OS X download progress. The installer is stored in Applications folder
-
Facetime app download and installation keeps restarting
Facetime app download and installation keeps restarting
He mate
You have to go to setting - iTunes and app store - turn off iTunes Store and App Store on both devices
Cheers mate :)
<Edited By Host>
Maybe you are looking for
-
Hello, I am using ASA 5505 as a transparent firewall. I have assigned ethernet 0/0 as outside interface and ethernet0/1-7 as inside interface. There are 3 departments in office. So, i connected ethernet 0/1 to Dept A, ethernet 0/2 to Dept B and e
-
How to print multiple Smartform Templates
Good day Gurus, I have 5 Smartform templates combined in one program. During printing if 1 data for each template is available, The pop-up screen also appears 5 times for me to print the templates. My question is how can I print the 5 templates using
-
Plz help me out with the answers
1 unconditional index controlled loop is? 2 select * from spfli into wa write: wa-carrid, wa-connid, wa-cityfrom, wa-cityto. as a result only one linre is printed why??
-
XP system not booting since installing ITunes
I successfully installed a 2.0 USB card onto my XP box, however the installation of the iPOD drivers and Ituns gernated errors, and sicne then, my PC will not boot in normal mode, even with last known configuration (The iPOD itself, though connected
-
Combining Tracks - Silly question
I rent a lot of books on tape from my library and upload them to iTunes. Needless to say it's extremely unorganized in my library and on my iPod because, unlike purchased books, they are all in seperate 3 minute tracks. Is there ANY way to combine a