MS word report generation

Hi,
I am trying to generate report in MS word.The functions used in report generation are appending test and appending table.At few instance of report generation getting the attachded warning/error And report is not generated.
Using SPI 2013 and MS word 2013.
Thanks,
Chethan
Attachments:
REPORT ERROR.JPG ‏63 KB

Hi
VI attached.
Note:The error message appears randomly(Not always).
Thanks,
Chethan
Attachments:
PA_REPORT.vi ‏45 KB

Similar Messages

  • Generate report using Word Report Generation VIs error

    When I Generate report using Word Report Generation VIs  ,the error is generated.
    This is  my Vi
    can somebody  tell the error reason?
    The attaché is Vi (one is 2011,other is 8.6)
    Attachments:
    report-8.6.vi ‏16 KB
    report2.vi ‏33 KB
    template.doc ‏40 KB

    Hi Ben64
                 Thank you! The problem is solved.
       BUT when I use the Word Easy Graph vi  ,the result is
    I want the Graph (curve),like as:
    How Can I do get the picture.
    I have other problem. I want to get default name for the new word file.
    liang

  • Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

    Hi !
    Sir I have some questions regarding word report generation using(C language in labwindows) Please.
    1.How can i add border to a word page?.
    2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
    3.How can i fill a cell of word report table withe the data type other than "character"?.
    And sir one question about use of timer in cvi labwindows please.
    Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
    Regards
    Imran
    Pakistan
    Solved!
    Go to Solution.

    Hello sir!
    Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is  involved i,m just trying to achieve minimum time interval of 1millisecond.
    Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
    And sir also waiting for your kind reply regarding word report generation.
    Thanks.
    Imran.
    Attachments:
    screen_shot_rigistry.docx ‏65 KB

  • Word report generation toolkit error with Win 7 LabVIEW 2013, Word2010

    Hi All
    I'm seeing different Errors using the Report generation toolkit. Maybe you can help me with that.
    The errors are:
    -2147417846, application is busy in Word_Get_range.vi
    -2146824090 Exception in Microsoft word: Befehl misslungenHelp Path is wdmain11.chm and context ...
    -2147417846 application is busy in Word_Quit.
    the error messages are attached to the post.
    I'm testing 10 sensors with one application and want to run up to 5 applications on one computer. Since I'm seeing such errors as application is to busy I set all my report generation vi's as non-reentrant execution and additionally added some pause after each word modification.
    But I'm still seeing such errors when I run two applications on one computer.
    What is the best way to deal with these errors?
    thanks
    best regards
    Urs
    Attachments:
    exceptionerror.PNG ‏20 KB
    BusyActiveX2.PNG ‏20 KB
    BusyActiveX.PNG ‏22 KB

    Here my Vi's involved in creating the report.
    Is there a way to check wheter word is busy or already open?
    Attachments:
    save report as PDF.vi ‏26 KB
    create_report.vi ‏70 KB
    Word_Update_Table.vi ‏34 KB

  • Word report generation problem

    I have a problem with my report generation toolkit. I have programmed a test program (main_program), where i can load a data and print it to a word document.
    First i have to load the data(data.txt) and then i have to push the print button.
    The header of my is ok, but when the Subvi (write2) tried to generate the graph in the Document always an error occured!
    I got an error message but i don*t found the reason why the program stops!?
    Error Message:
    Fehler -2146827284 ist bei Exception occured in Microsoft Graph, Die Interior-Eigenschaft des Series-Objektes kann nicht zugeordnet werden.. Help Path is C:\Programme\Microsoft Office\OFFICE11\1031\graph10.chm and context 0 in Word_Set_Chart_Colors.vi->Word Set Graph Colors.vi->write2.vi->Report.vi->Main_program.vi aufgetreten
    Could sombebody help me, please???
    Best regards,
    Peter
    Labview 7.1 on Windows 2000
    Attachments:
    program.zip ‏94 KB

    Another question....
    I want to make a axis label for the y-axis. I can do this with the "word set graph font.vi"!
    But when i make this, the label is horizontally. Where can i change this label to vertical???
    see the attachement....
    Best regards,
    PETER
    Labview 7.1 on Windows 2000
    Attachments:
    word.jpg ‏30 KB

  • Word report generation VIs are not found.

    Hi,
    I've installed LabVIEW 6.1 followed by installing Report Generatio Tool set, but I don't find word specific VIs and excel specific VIs on Function Palatte. Could u plz. let me know what I m missing there.
    Regards
    GNS

    GNS,
    Which version of the toolkit did you install?
    Do you see the Report Generation Toolkit listed under the Add/Remove Programs in control panel?
    If you have multiple versions of LabVIEW, check in which folder did the toolkit get installed.
    Can you find word and excel llbs under ...\LabVIEW 6.1\vi.lib\addons\_office directory?
    If these VIs didn't get installed, you should check the version (LabVIEW 6.1 needs toolkit version 1.0.1) and reinstall the toolkit.
    If you do have these llbs, try to manually edit the palettes and add new subpalettes linked to these menu files:
    LabVIEW 6.1\menus\default\excel.mnu and
    LabVIEW 6.1\menus\default\word.mnu
    Check out the following KnowledgeBases as well
    "Palettes Not Populating" Error with the Report Generation Toolkit 1.0 for Microsoft Office and LabV...
    Installing the Report Generation Toolkit on Multiple Versions of LabVIEW
    Zvezdana S.
    National Instruments

  • Is ms office 2013 supported for report generation​? Error 41106

    Hi
    I have a copy of LV full development suite with the Excel and Word report generation toolkit added.
    I have recently changed to using Office 365 that includes offline versions of Excel and Word from Office '13.
    When using the report generation toolkit, I get an error 41106.
    I have reinstalled the toolkit - no effect.
    I sort of assume therefore that office 2013 is not supported?
    Any hints, tips, patches or workarounds please.
    Bill

    Bill_Shepherd wrote:
    Hi
    I have a copy of LV full development suite with the Excel and Word report generation toolkit added.
    I have recently changed to using Office 365 that includes offline versions of Excel and Word from Office '13.
    When using the report generation toolkit, I get an error 41106.
    I have reinstalled the toolkit - no effect.
    I sort of assume therefore that office 2013 is not supported?
    Any hints, tips, patches or workarounds please.
    Bill
    I've seen some issues when I upgraded to Office 2010. Note that it is possible that the route cause of your problem is totally different but in my case there was some ActiveX properties or Methods call that have been changed. I solved this issue by navigating to the property/method that caused the error, clicked on it and reselected the same property/method. You could probably find some older post that discuss that. Hope this help.
    Ben64

  • Report Generation Toolkit 1.01 and broken arrow

    Hi,
    I desperately need help because I need to build my application tomorrow morning for our production department and have trouble with the report toolkit.
    I am aware of your knowledge base entry regarding this problem. I already deinstalled and reinstalled the toolkit (version 1.0.1 for LV 6), and I checked the windows registry entries. Still, after mass-compile, the report generation toolkit VIs are not executable (broken arrow, invalid property node). I have LabVIEW 6.02, 7.0 and 7.1 on my computer and I am using the report generation toolkit version 1.0.1 with LabVIEW 6.02 and version 1.1 with LabVIEW 7.1. The application that I need to build is written in LabVIEW 6.02. What else can I do to get rid of the broken arro
    ws?
    Thanks in advance for your fast answer....
    Gabs

    Hi,
    the problem is the following: during the build error 1003 occures at ....\internal.llb\Word_New_Page.vi. Possible Reasons: LabVIEW: The VI is not executable. When I open my main VI, I see no broken arrow. When I force a mass-compile (Strg+Shift+Run button), the broken arrow appears suddenly. I can then see the following error message: Word Easy Text.vi is broken because Word Format Text.vi is broken because the Property Node Range\Style calls an invalid property. Actually, the property nodes in these VIs have NO properties and the invoke nodes NO methods.
    I know now that this is due to the fact that I need to build this application for a computer on which Word97 is running, so I installed the Report Generation Toolkit for Word97. But - on my developme
    nt computer where LabVIEW is installed Office XP is running, not Office97. If I install the Report Generation Toolkit for OfficeXP, no error occurs during the build, but the executable does not run properly on the target computer (when calling Word97).
    Question for NI: How am I supposed to build an executable using Microsoft Word Report Generation Functions if the target computer has Word97 installed but the development computer has WordXP installed???
    Please help,
    thanks,
    Gabs

  • Word report : checkbox

    Hi,
    I have a question about the Word report generation with LabWindows CVI.
    I want to check or uncheck some checkboxes with CVI.
    I did not find a function in CVI library (Word Report) that changes checkboxes value.
    Is it possible to do it (in a simple way)? If this is not the case I will arrange to remove the check boxes.
    Thanks,
    Danaé P.

    Hi D1431,
    Sorry for the late reply,
    There is no functions in CVI word report library that allows to check or uncheck a checkbox in a word report.
    However you can use an Active X server in CVI: http://www.ni.com/white-paper/2714/en/ to get access to all the functionalities and functions available for Word (http://www.extendoffice.com/documents/word/993-word-insert-check-box.html for instance).
    Hoping it'll help you.
    Best Regards
    Louis
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure
    Du 2 au 23 octobre, partout en France

  • Report Generation MS-Word always give error

    Hi
    I am using LV 2012 and MS Office 2010.
    I am using report generation toolkit to have a customised output report.
    When I specify output format as excel, I am able to get the desired result but when I specify output format as word, it always throws an error. I checked running the NI examples meant to give output in word but they all fail while the excel reports are perfect.
    Please find attached an error code for one of the example Sample Report(word).vi
    Please suggest the solution.
    Regards,
    Manbir
    Attachments:
    error_doc.JPG ‏20 KB

    We need to see the code in order to say "Here is the error" or "Try doing it this way".  It also gives us something to try, ourselves.  Do you know how to make "snippets", which are .PNG "pictures" of your code that you can simply put into the message using Insert Image?  We can then drag this image into a LabVIEW Block Diagram, and voilà, working code!
    BS

  • How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

    I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
    Thanks for reply!
    YangAfreet

    Hi yangafreet
    You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
    Rich
    Attachments:
    Table Edit.vi ‏23 KB

  • Report Generation Toolkit - Prints data from a previous report in Word

    I am running an executable from the "system exec.vi" created with Labview 6.1. I am using the Report Generation toolkit vi's to create a report in Word that prints simple Title with test header and then appends a Table with measurement data. The problem is the measurement data in the table is from a previously printed report. This problem only exists when I Run the Report.exe from the "System Exec.vi". If I manually start the Report.exe in Windows or open in the Windows Commandline the correct data measurement data is printed in the report table. Any suggestions are appreciated. Thank You

    Hi,
    So far I havent been able to reproduce this on my computer. Could you post your code so that I can try and reproduce this issue?
    Feroz P
    National Instruments

  • I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 profession​al. The create new report VI opens Excel but throws error (-21471672​62- from automation open VI) when I try to open MS word. please help...

    I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

    Hi Leo22,
    Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
    Jeremy L.
    National Instruments
    Jeremy L.
    National Instruments

  • Report Generation Toolkit (Word) : How to use correctly bookmark and cross-reference without "Error! Reference source not found"

    Hi,
    I try to generate a report using a template. In my template I use some cross-reference to refer to one bookmark. For exemple in the first page I created a bookmark for my name and in the header I created a cross-reference refer to my name. The problems is when I run my VI the bookmark actualise perfectly but the cross-reference refer to the bookmark can't actualise with the same value and generates an error : "Error! Reference source not found".
    Can somebody help me please!
    Nki
    Solved!
    Go to Solution.
    Attachments:
    01.jpg ‏72 KB

    Hi,
    When i create the word template, the bookmaks and the cross-reference referred to the bookmark update correctely. The problem is when I try to change the bookmark using "report generation from template vi" the bookmark change but not the cross-reference and the error generated is "Error! Reference source not found". 
    I make coople reasherch and i think they have no solution for this because : "if the text in a heading referred to in a cross-reference is revised, the cross-reference to the heading may no longer work" (http://office.microsoft.com/en-us/word-help/troubleshoot-cross-references-HP005189368.aspx).
    To "resolved" this problem I create an other bookmark in the template who have the same value white the principle bookmark.   
    I use Labview 2011 and Micosoft office 2010.

  • Report Generation Toolkit: Table of Contents in MS Word

    Hello forum users,
    I would like to add a table of contents to a MS Word document, using the Report Generation Toolkit.
    I couldn't find a VI in the toolkit that does that, so I tried to modify the VI "Word Insert Field.vi". Doing so, I could access a property node of the class "Word._Document"  and an invoke node of the class "Word.TablesOfContents" with the method "Add".
    As this modified VI does not belong to the private LabVIEW class "NI_Word.lvclass", it is not possible to unbundle the (type cast) "report in" wire to get the "Word._Document" class reference. I can't add the modified VI to the NI_Word class either, because it is password protected.
    There are so many methods and properties that are not used in the official Report Generation Toolkit, like this one. How can I access them?
    Or maybe there is another way to add a table of contents to a MS Word document (programmatically). Maybe I have to use a template. I rather wouldn't, though.
    Operating System: Windows 7 64bit
    LabVIEW: 2009 [9.0 (32bit)]
    Report Generation Toolkit: 2009
    MS Office: 2003 SP1
    Thank you for reading an answering.
    Solved!
    Go to Solution.
    Attachments:
    Word_Insert_TOC.png ‏68 KB

    Hello again,
    in the "Word Specific" > "Word Advanced" Palette of the Report Generation Toolkit, there is a VI called "Word Get ActiveX References" which essentially unbundles the private "report" data stream / wire. Thus, I can use the property and invoke nodes that make use of the "Add TablesOfContents" method.
    I hope, that helps other users as I didn't find too many topics on Report Generation. Maybe it's just too easy...
    Attachments:
    Word_Insert_TOC_fix.png ‏60 KB

Maybe you are looking for