MS Word report not visible in executable

We are using LV 7.1 FDS (with app builder) on Win2000 prof. We have Report Generation Toolkit and Database Connectivity Toolkit installed (among others). Our VI publishes reports in MS Word. When the user clicks the "report" button, the VI generates the report and this is available to the user on screen. No file is saved and the user has the choice to save the report with any name.
The report function works fine in VI state.
But, when we make an EXE of the VI the behaviour of reporting changes. Now, pressing the "report" button triggers harddisk activity but nothing comes-up on the screen. There is no report to be seen on either the screen or the taskbar!! In the VI, the taskbar shows a word document and the report is accessible when the user clicks on this.
The amount of disk activity is similar to the case when we were generating reports in our VI.
The EXE is being tested on the same machine as the VI.
We have tested on 3 machines (with Office 200 and Office XP) but the problem remains.
What could be going wrong?
An early answer would be appreciated.
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Bill and Kileen,
Thanks both. That is just what was needed. I tested and it works fine now.
The same is also mentioned in the User Guide / Release Notes that accompanied the toolkit.
I happened to collect some other webpages and .pdf that talk of other issues. In case someone happens to need this (.zip file would be less than 1 MB), please feel free to write at [email protected]
Best regards,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Similar Messages

  • Japanese input Kotoeri Maverick Register Word menu not visible

    Hi,
    I would like to add words to Kotoeri japanese dictionnary, but the menu Flag/Register word is not visible, I tried alt but on succès
    Any idea?
    Best regards

    Ok So I asked on the Japanese Fourms and this is the answer I got back. To be honest I had tried this on my work computer before and it did not work but it is working on my home computer so maybe this will help you.
    Mavericks (OS 10.9)ではことえりのユーザ辞書の仕様が変わりました。
    The way you do this action has changed with the change to Maveriks.
    1）まず、ことえり入力メソッドを追加する必要があります。
    Make sure that you have added the Kotoeri Method (I think you have)
         →　Add the Kotoeri input method
    2）既に追加済みであれば、こちらのヘルプをご確認下さい。
    Next use the below link to help you add words to your dictionary.
         →　Add words and symbols to a user dictionary
    Pretty much you add things to your dictionary like you would add shortcut word like (R) becomes ®.
    1. While using Kotoeri, choose Edit Text Substitutions from the Input menu (looks like a flag or character) in the menu bar.
    2. In the text pane of Keyboard preferences, click Add to add a word.
    3. Type the hiragana reading of the word in the Replace field. Readings of registered words can be no longer than 32 characters. If you’re registering an adjective, make sure to enter the reading in its dictionary form. The ending must be 〜い (~i). For example, あたらしい (atarashii) or たかい (takai). If you’re registering an adverb, don’t include inflective endings, such as 〜な (-na) or 〜だ (-da).
    4. Click the With column, then type the replacement word in the With field.A word can be no longer than 64 characters.
    Hope this helps you out. I will have to wait until Tuesday to find out if it works on my work computer.
    Happy Chinese New Year.

  • Report Viewer Webpart IE9 issue -Reports not visible

    Hi,
    we have several installations using Sharepoint 2010 together with Reporting Services 2008 and 2008R2.
    When displaying reports in Sharepoint through the report viewer webpart, the rendering in IE9 will sometimes not display the report. This means
    the Sharepoint site including the report viewer headline is visible, but the report itself is not rendered. After pressing ctrl+F5 the report most of the time will show up. When viewing the logs of reporting services it is clear that the report has been executed,
    but as stated it was not visible in IE9.
    Even when forcing IE9 to render all Websites in compatibility mode there is no change. Out of 10 times the report is roughly 3 times not visible.
    On systems still using IE8 there are no problems at all.
    Any ideas?
    Regards,
    Andre

    Hi,
    I just want to know whether this problem occurs on all the computers which installed Internet Explorer 9? As a test, please try to reset IE then check the result again:
    1.      
    Run Internet Explorer, use Alt + T to open Tools menu, choose Internet Options.
    2.      
    Choose Advanced tag, click “Reset…” button, click OK in the pop-up box.
    3.      
    Click OK to close Internet Options, then restart Internet Explorer.
    In you have any progress, please let me know.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • PowerView report not visible in Excel web App

    Created a report using PowerView in Excel 2013 but it is not visible when i am viewing in Excel Web App?
    Is there any settings we need to enable?
    Kindly suggest.

    Good question. This is something that's really hard to find an answer to in the docs. But as far as I can tell, you need SQL 2012 sp1 Enterprise or BI edition. Also, SSRS will have to be installed and configured in SharePoint integrated mode. Also, Excel
    services will need to be configured to be used, not Excel Web apps.
    For me, part of the confusion comes from the fact that there are actually several versions of Power View, and the docs are not always clear which version they're referring to, so my answer might be wrong.
    Supporting links:
    Excel 2012 sp1:
    http://msdn.microsoft.com/en-us/library/gg492257.aspx
    Enterprise or BI, SSRS in Integrated mode:  http://technet.microsoft.com/library/cc645993(SQL.110).aspx
    Excel services, not Excel Web apps:
    http://office.microsoft.com/en-us/excel-help/power-view-in-excel-on-office-365-or-in-sharepoint-server-HA103276078.aspx?CTT=5&origin=HA102835634
    Mike G.

  • DBACockpit - Generate AWR reports not visible

    Hello,
    i have read the "SAP on Oracle Development Update":
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a07754d4-edd4-2910-0683-c9473aaeca51
    On page page 27 is a screenshot of the possibility to generate AWR reports out of DBACOCKPIT.
    I have an ABAP system on SAP_BASIS 7.00 with Patchlevel 15 (SAPKB70015) but i can not see this menu option. I only have the "Active Session History" but no "Workload Reporting".
    As described in sapnote #1028068 the monitored database is a local one and the licenses are purchased by SAP. The note also describes that the function should be available with SP12.
    What's wrong? Have you already checked your system for this point?
    Regards
    Stefan

    Hello Stefan, Hello Bill,
    we had the same problem. In 7.00 SP12 you can select the option, in SP15 it is not visible. We opened a customer message and were told, that there were some irritations arount the license of Oracle Diagnostic Pack, so SAP deactivated it in DBACOCKPIT/SP15. This is no problem any longer (note 1028068).
    In later SPs you can set an option (have look at note 1136582 / 1250596), but in SP15 you have to modify the source code. Unfortunately SAP isn't able to ship this via snote. In this case it might be better to open a customer message to get a detailed information.
    Regards
    Andreas

  • SSRS report not visible in Chrome, found the fix but don't understand where CTL_032 was determined.

    SSRS reports come up blank in Chrome. I found the solution listed numerous times. I am running SQL Server 2012. 
    Tried div#ctl31_ctl09 and ctl31_ctl10 but finally got to div#ctl32_ctl09 that worked. Where in the heck to I find the clt codes for the curretn version of SQL and can I find all ctl codes and just list them all so I don't have to worry about what one.
    div#ctl31_ctl09,
    div#ctl31_ctl10,
    and so on.
        overflow: visible !important;
    David Young

    Hello David,
    See Planning for Reporting Services and Power View Browser Support (SSRS 2014); Chrome is not supported, on IE, Firefox and Safari.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • SCOM reports not working, with execute permission denied error.

    Operations manager 2012 R2,
    some reports stopped working. Then i open report and click "add object" or "add group" i get error:
    Note:  The following information was gathered when the operation was attempted.  The
    information may appear cryptic but provides context for the error.  The application will continue to run.
    The EXECUTE permission was denied on the object 'ManagedEntityTypeGetBySystemName', database
    'OperationsManagerDW', schema 'dbo'.
    In SQL  there is EXECUTE permission on object 'ManagedEntityTypeGetBySystemName'
    Reports which not required to specify object or groups are working as expected.
    what esle can be wrong ?

    Hi,
    Please refer to the blog below. It tell us how to grant permission to objects.
    http://www.ndoubleor.com/the-execute-permission-was-denied-on-the-object-database-schema-dbo/11/2009/
    Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Juke Chou
    TechNet Community Support

  • All reports not working, with execute permission denied error.

    Operations manager 2012 R2,
    all reports stopped working. Then i open report and click "add object" or "add group" i get error:
    Note:  The following information was gathered when the operation was attempted.  The information may appear cryptic but provides context for the error.  The application will continue to run.
    The EXECUTE permission was denied on the object 'ManagedEntityTypeGetBySystemName', database 'OperationsManagerDW', schema 'dbo'.
    In SQL  there is EXECUTE permission on object 'ManagedEntityTypeGetBySystemName'
    what esle can be wrong ?

    Take a look at
    this.
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • MCTC report not visible for particular period.

    Hi.
    I am uanble to see data in MCTC t code.
    Figures are visible Nov Month
    Figures Not are visible Dec Month
    MCTC report itself doesnt fetch data for Jan Month.
    Any  configuration need to be maintained?
    Customer & material both marked for statistical group.
    Reg.
    Amol

    Hi Amol,
                   Do as suggested above- Click on user settingsParameters-- Inclusde (With current peroid Check box should be ticked) in selection proposal. And make sure that the material has the  material stastics group in sales org2. Kindly please let me know If you need any more information on this.
    Regards,
    Ram Pedarla

  • CProjects Status report not visible

    Hi
    I am trying to disply the project status report but unable to do so.
    When I click on Preview butttonto display status report, new screen opens with Save, Save and Send and cancel button but could not see report there.
    Is there anything missing with JAVA applate setting?
    Working on ECC6 server.
    Thanks and Regards,
    Niraj Sikligar

    Hi Niraj,
    Run the following reports in Transaction SE38
    1. FP_PDF_TEST_00
    specify connection as ADS
    This should return certain version information. If this is succesfull go for the next one.
    2. FP_TEST_IA_01
    Keep everything on the selection screen as it is and execute.
    Note: If you get an error that says: "Cannot find PDL type for output device LOCL",
    Open the report in SE38 in display mode.
    Navigate to the source code:
    * Set output parameters and open spool job
    fp_outputparams-preview  = 'X'.    " do not launch print preview
    fp_outputparams-nodialog = 'X'.      " suppress print dialog
    fp_outputparams-connection = p_conn.
    Place a session break-point on
    fp_outputparams-connection = p_conn.
    and then execute the report (F8).
    When it stops at the break-point, double click on fp_outputparams-nodialog  and remove the X on it.
    (you may take help from a technical guy here)
    Continue by pressing F8.
    A print pop-up will appear, change output device from LOCL to PDF1 and continue (F8).
    Check wether a form is displyed or not.
    Regards,
    Reema.

  • Discoverer report not visible

    Hello,
    i logged into discoverer plus using Sysadmin user but still i couldn't see some reports whose owner is some other user. How to see all the reports available in Discoverer Plus? Using which user and responsibility should i login for that?
    Your help is greatly appreciated.
    Thanks
    --Kumar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi Rod,
    Like always, thanks for your help but here a consultant has created some discoverer reports last year using the login details of our users. Now he is not here anymore and if we want to change something in the report, we have to request the user to grant access of the report to SYSADMIN or our username which is really a frustrating. I'm surprised why we don't have any super user to have access to all the reports....
    Thanks
    --KK                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Crystal Report not visible when using IE9

    Hello,
    I have a report that has been displaying fine in IE8 for me, but when I upgraded to IE9, the report stopped displaying.  This problem seems to only occur if the report has more than 5 columns of data in it.   If it has 5 or less columns, everything displays correctly.  If it has 6 or more columns, a blank page loads.  I've noticed that if I try to print the blank page,  it will print correctly(all columns will display).
    So far, the only solution I've found is by going into compatibility mode in my IE9.    Is there a way to fix this so that compatibiltiy mode is not required to view the report in IE9?  This report is going to be used by client's and I have no way of stopping them from upgrading their browser.
    Also, I have read that Crystal Reports does not support IE9.  Does anybody know when they will support it?
    I'm using Crystal Reports version 14.0.2.364 RTM to create the report.
    The version of Crystal Reports on my aspx page is  13.0.2000.0
    Thank You.

    Bug description and suggested workarounds have been posted in this thread:
    Fix for CR for VS2010 visual effects bug: faded or blank report under IE9
    04/17/2012 Update:
    It has been verified that the bug fix has been applied to Service Pack 3.

  • SCCM 2012 Reports not visible

    Hi All,
    I am unable to view Reports in the SCCM CM 2012 console and the URL.
    I have installed the Reporting service in DB server and later also ran the Reporting service configuration on DB server.
    After that I am able to browse to the URL but do not see any default reports.
    I have followed http://www.windows-noob.com/forums/index.php?/topic/4550-using-sccm-2012-rc-in-a-lab-part-11-adding-the-reporting-services-point-role/
    Please suggest

    Hi,
    This is what I am getting in the log SRSRP
    Any Suggestions
    Timed Out... SMS_SRS_REPORTING_POINT
    4/7/2013 7:30:43 AM 4012 (0x0FAC)
    Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
    SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
    4012 (0x0FAC)
    The request failed with HTTP status 401: Unauthorized.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
    4012 (0x0FAC)
    (!) SRS not detected as running SMS_SRS_REPORTING_POINT
    4/7/2013 7:30:43 AM 4012 (0x0FAC)
    Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:30:43 AM
    4012 (0x0FAC)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
    4/7/2013 7:30:43 AM 4012 (0x0FAC)
    Timed Out... SMS_SRS_REPORTING_POINT
    4/7/2013 7:31:43 AM 4012 (0x0FAC)
    Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
    SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
    4012 (0x0FAC)
    The request failed with HTTP status 401: Unauthorized.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
    4012 (0x0FAC)
    (!) SRS not detected as running SMS_SRS_REPORTING_POINT
    4/7/2013 7:31:43 AM 4012 (0x0FAC)
    Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:31:43 AM
    4012 (0x0FAC)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
    4/7/2013 7:31:43 AM 4012 (0x0FAC)
    Timed Out... SMS_SRS_REPORTING_POINT
    4/7/2013 7:32:43 AM 4012 (0x0FAC)
    Reporting Services URL from Registry [http://ushtsawphxp015:8080/ReportServer/ReportService2005.asmx]
    SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
    4012 (0x0FAC)
    The request failed with HTTP status 401: Unauthorized.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
    4012 (0x0FAC)
    (!) SRS not detected as running SMS_SRS_REPORTING_POINT
    4/7/2013 7:32:43 AM 4012 (0x0FAC)
    Failures reported during periodic health check by the SRS Server USHTSAWPHXP015.PHXCORP.COM.
    SMS_SRS_REPORTING_POINT 4/7/2013 7:32:43 AM
    4012 (0x0FAC)
    Waiting for changes for 1 minutes SMS_SRS_REPORTING_POINT
    4/7/2013 7:32:43 AM 4012 (0x0FAC)
    Murali Krishna V.S

  • Subpanel with visa not visible in executable

    I wanted to attach two VIs but for some reason the "post" button on this forum doesn't work when you try to add an attachment and hoovers over the browse button. Anyway, the VIs would have been called Main and subpanelVi. 
    The Main.vi contains a subpanel and loads subpanelVi.vi in it with an invokeNode. subpanelVi.vi contains a "VISA Open" vi and a string control. When I open Main in the development environment I see the string control in the subpanel. When I create an executable of the Main.vi and run it I don't see the string control in the subpanel, I also can't stop the while loop of the Main.vi. The same happens when placing a "VISA Find Resource" vi in the subpanelVi.vi.
    I would like to use these VISA-VIs in a subVI who's FP I would like to be displayed in a subpanel. Why does this go wrong and how to solve it?

    I checked the checkbox Window Appearance\Customize\Show Front Panel When Called but that didn't solve the problem.
    Ranjeet_Singh: If I only build an executable I don't see how to include VISA. Is it not only possible to include libraries in the Installer Builder?
    The FP only does not show when I place a "VISA find resource" or "VISA Open" on the blockdiagram of the subVI I want to put in a subpanel.
    I noticed that in the executable when I stop the while loop of my "main.vi" (the one that invokes the subVI), the main stopped because i can see the icon top-righ but apperently the "VISA Open" is still running. Only when I click the red abort button the main.vi  window closes and disappears.
    How to include VISA in the "build executable definition" and why does this problem not occur when placing a "VISA write" or "VISA read" on the blockdiagram for example?
    Many thanks so far. (I'll give kudos as much as I can to the one that can help me solve this problem. It's kind of urgent) 

  • Reports not visible for users

    HI,
    I had designed few reports in SD and MM. how do i link those reports for users. and generally what is the path for the users to see the reports in BEX.
    Thanks in advance
    Ravi

    Hi Ravi,
    Create a role (PFCG) for your users and provide them access to view and run the reports and then you save the reports to that role. Then the users will be able to view and run the reports.
    If you save the reports to favourite, only you will bve abel to see them as it is specific to you.
    Hope this helps,
    ***Assign points if helpful***
    Regards,
    Kalyan

Maybe you are looking for