MS word templates free text referenced gets cut

Hello Experts,
CRM 5.0
We have a scenario where we have implemented a custom BADI to add attributes in the list of fields that can be pulled into MS word templates from an order object in CRM. Some of the free text areas are also being referenced in the MS word templates. However only the first 128 characters from the free text area get pulled into the MS word template. The BADI does not seem to put this limit as in debugging, we can see all the text being referenced but on the front end only 128 characters flow through. Can someone please suggest a solution around this?
Thanks & regards
Ritwik Sharma

BackInBlack wrote:
>
> The problem arises when I try to display the content on
that field on some
> display templates. The formatting is lost and there are
several characters that
> get replaced by ~ as well as little square boxes that
are a special character
> that I can't identify.
>
> Is there anything anyone can suggest on how to approach
this problem? is it a
> coldfusion administrator issue, a server setup issue,
does word have to be
> installed on the server that the applications run? is it
a setting in SQl
> server. I was hoping someone has had a similar problem
and can point me in the
> right direction.
It is a character encoding issue. This is a big topic, but
there is
plenty written up about it. You probably want to configure
your
application use use window-1252 or unicode encoding format.
You will
want to make sure the entire system running the application
is talking
the same encoding, database web server and ColdFusion.

Similar Messages

CS5 Text still gets cut off when using filters

In Flash CS4, I encountered a strange bug where text would get cut off if there were any filters applied to the text box. I was so excited for CS5, because I had heard that bug was fixed. Now I see that it is not.
I'm using Classic Text in an Actionscript 2.0 file. Here's a screenshot to demonstrate what I mean. The top line is text with no filters applied. The middle line is text inside a movie clip, with filters applied to the movie clip. The bottom line is text with a drop shadow filter applied directly to the text box. Why does it cut off the end of the text???
Has anyone else experienced this?

Hi,
You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
Please mark this post as Answered if this post helps to solve your query.

I can not open completly a word document with pages - it gets cut at page 116

if I open the same document with Word for mac i can review the 265 pages - but if I opent it wih pages it gets cutted at page 116

There is probably a table at 116 that has cells that spans over more than one page. Pages can't breakt text withina table cell,.Only between rows.
You can try to change the paper size in Page Set Up to something much longer, to being able to the the content

Text in fillable text form gets cut off and appears only in the lower half of the text form?

I'm trying to create a text-fillable PDF form. However, when I add a text form, the text I test in it gets cut off and appears only in the lower half of the text form by default (see 2nd photo below). How do I correct this and make the text take up ALL the space in the form like the 1st photo?

Have you set the text field properties options to multiline? Is so, please attach a screen shot of that dialog box so we can see how it is set.

Brochure template right-side edge gets cut off when printed

its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
comments are hidden (that helped a little)

With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
MacBook Pro Mac OS X (10.4.9)

Text / Titles Get Cut Off After 3 Lines?

I did some searching but couldn't find a discussion on this. When I add a Title of any kind and try to fill it with more words that fit on the screen (in vertical space) it just cuts them off at the bottom. I've attached an image that shows the third "wednesdays" text in my project and you can see it cuts off the bottom of the Y. If I add a fourth "wednesdays" you don't see it at all. Using the transform tool only stretches the text, it doesn't increase the vertical space available for more text. I am running Lion if it matters.
Has anyone found a fix for adding more vertical space for text or is this a known bug? Or am I missing something really easy?
Thanks!

You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

Text is getting cut off when saving a PDF from Photoshop CS 6

I've begun to run into an issue quite frequently that I just cannot find a work around for. The first image shows what it looks like in Photoshop:
Then this is what it looks like in Adobe Acrobat after it's saved from PS:
You can see a whole swath of text is just missing. I've tried everything I can think of to get it to save correctly. This is a high resolution image, exported at press quality.
Please help.

I've played around with the PDF settings, and nothing seems to work. Here's what I'm using now:
As for the font properties, this is what Acrobat shows after I open the file in there:

Taxonomy Attributes - Can they accept free Text

HI Friends,
Our MDM Version: MDM 5.5, SP06, Patch 04.
We currently have Taxonomy Attributes sent from MDM to ECC Classification & Material Characteristics using CLFMAS02. Until now these characteristics had fixed values and this was fine as both MDM and ECC were accepting only fixed values.
Now the business wants to make the Classification Characteristics in ECC as free Text(No Drop Down). And this is do able in ECC. But MDM cannot allow Taxonomy Attrbutes to be Free Text . It has to have fixed set of values in MDM.
Please help me with input in the following areas:
1. Can we make the Taxonomy Attributes in MDM as FREE Texts.
2. If we cannnot make them as FREE Texts , what is the reason for it to have been designed so.
3. What should be the alternative approach i could use to have this scenario implemented in MDM.
Your inputs would be greatly appreciated.
Thanks,
Sh

Hi Alexander,
I have an excel interface used for Mass Creation of Materials. This will in addition have fields for the Taxonomy Characteristics which would accept free text and get mapped to the characteritics.
Unless the characteristic is a free text it will not work.
As I mentioned on the ECC side the free text for characteristics can be enabled. the challenge is MDM does not allow it so i dont think i can use the CLFMAS as is.
Any suggestions would be greatly appreciated.
Thanks,
Sh

Text problem - will not run on...gets cut off

I need my text to appear to the right hand side of an image, so on the left of the screen is the image, and to the right is the text.
Is there an option to make the text run on, underneath itself? It keeps running along and gets cut off the edge of the screen!

yeah, just hit 'enter' when you want a line break. it's not like MS Word where it breaks when you hit a margin. once you are done typing your text you can center it or make it left or right adjusted.
Message was edited by: budakhan

Why does the text used in Flash file gets cut off in swf?

Please help.
I am using some text in FLA and when I test movie or publish swf. I see the end of the last word in the text line cut off.
I tried putting extra space after that and that solved the problem yesterday but today again I face the same problem and the problem is not getting solved with the same solution.
Does anybody know why it's happening?
Please let me know.
Thanks in advance.

one query: if file is created relative to Java and Tomcat starts from bin directory, them
file should have been created in c:\tomcat6\bin\abc.txt,
NOT at c:\tomcat6\abc.txt
Am I write?
--Sujoy

How to use the Report Generation Toolkit to get a list of bookmarks in a Word Template

I am working on a project where I will need to use the Report Generation Toolkit to fill out a fairly long Word Template. The MS Office Report Express VI can only have inputs for a maximum of 17 bookmarks which is not nearly enough for what I am needing to do.
I'm wondering if there is some way to use the lower level report generation VIs to read the word template and return a list of the bookmark names as a 1d array of string. The dialog box that you use to set up the Express VI has this capability but I'm not finding a way to scan the document programatically.
I'm sure I can't be the first person to run into this issue and I'm hoping that someone out there has found a good solution.
Solved!
Go to Solution.

Wordsub.llb should be somewhere in your Labview folder on your local drive. The path to it in my install is: C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\addons\_office\_wordsub.llb
Also what specific problem are you referring to about 17 bookmarks? Is that the limit on the express style VI for filling them in from LV? If so what you will need to do is to use the lower level function 'Word Insert Field' under Word Advanced VIs. You will need to supply the VI the name of the bookmark and the text you want to insert.

Text in Dynamic Textfield gets cut off

Hi
I have a dynamic text field which is just one line of text.
For some reason letters like g or p that go below the regular
line of text get cut off.
I have made the field bigger, and also played around with the
_height Property but it doesn't make a difference.
I have imported the font into the Library. When I embed it
the font doesn't cut off but looks very different. And if I change
the field to a static field it doesn't cut off either, but the font
looks a little different as well.
Any ideas?

Why should I start a new thread if this one was never resolved and I am still having the same problem?
ANYWAY,
I was able to fix this by finding an answer on a different forum.
Simply increase the text leading using the text format option, like so:
var format:TextFormat = new TextFormat();
format.leading = 2;
field_txt.defaultTextFormat=format;

HT1918 When I try to download a free app after log in the iTunes gets cut off with a msg update security question where do I do this?? I can't download anything

When I try to download a free app after log in the iTunes gets cut off with a msg update security question where do I do this?? I can't download anything

If you have a credit card on file on top of your gift card then it is asking you to confirm the security code for the card, which for a Visa or MasterCard is 3 digits located on the back, or AMEX has 4 digits on the front. This happens just to ensure that you are the account holder, and would happen from time to time whether it was a free or paid app, even if you have a credit through your gift card. This doesn't mean that your credit card will be charged.

To get a word in the text file

Hi,
I m beginner to java.
HOw i get a word in the text file.
I used this code, it is only display the all sentence which are available in the text file.
But , I need to print particular word (if it is available in that text file)
package com.beryl;
import java.io.*;
class FileReadTest {
public static void main (String[] args) {
     FileReadTest f = new FileReadTest();
f.readMyFile();
void readMyFile() {
     BufferedReader dis =null;
String record = null;
int recCount = 0;
try {
File f = new File("E:/hello/abc.txt");
FileInputStream fis = new FileInputStream(f);
BufferedInputStream bis = new BufferedInputStream(fis);
dis
= new BufferedReader(new InputStreamReader(bis));
while ( (record=dis.readLine()) != null ) {
recCount++;
System.out.println(recCount + ": " + record);
} catch (IOException e) {
// catch io errors from FileInputStream or readLine()
System.out.println("Uh oh, got an IOException error!" + e.getMessage());
} finally {
// if the file opened okay, make sure we close it
if (dis != null) {
     try {
dis.close();
     } catch (IOException ioe) {
Thanks & Regards,
kumar

I used this code, it is only display the all
sentence which are available in the text file.
But , I need to print particular word (if it
is available in that text file)if
String.indexOf()

I filled in a fillable pdf form and when i print it, the text in the fillable section gets cut off.

I filled in a fillable pdf form and when i print it, the text in the fillable section gets cut off. What do I need to do to get the entire text to be printed. Any help is appreciated.
Thanks

What has this to do with Pages? You probably did this in Preview.
Peter

MS word templates free text referenced gets cut

Similar Messages

Maybe you are looking for