MS12-070 and RSCLientPrint 2008 versions

Background:
Installed MS12-070, bringing my sql server 2008 (x64) to 10.0.5512.0. After reinstalling the RSCLientPrint 2008 ActiveX control on my PC,
I see this:
Name:                   RSClientPrint 2008 Class
Publisher:              Microsoft Corporation
Type:                   ActiveX Control
Architecture:           32-bit
Version:                10.0.5500.0
File date:              ‎Thursday, ‎September ‎22, ‎2011, ‏‎6:10 PM
Date last accessed:     ‎Today, ‎March ‎07, ‎2014, ‏‎12 minutes ago
Class ID:               {5554DCB0-700B-498D-9B58-4E40E5814405}
Use count:              19
Block count:            3
File:                   rsclientprint.dll
Folder:                 C:\Windows\Downloaded Program Files
I noticed the RSClientPrint cab files (...\MSRS10.MSSQLSERVER\Reporting Services\ReportServer\bin) are still from back to ‎September ‎22, ‎2011
1) Is this ok? I would think that cab files dates would be updated too after the security update.
2) Is ok to have RSCLientPrint 2008 ActiveX control with version 10.0.5500.0 after installing MS12-070 that brought my SQL server to version 10.0.5512.0?
3) Why ActiveX version is not 10.0.5512.0 ?
All three questions are important. Please help understand. Thanks
Paulino

Hello,
That cab file can be found in the following directories too:
C:\Program Files <x86>\Microsoft Visual Studio 9.0\Report Viewer\
C:\Program Files\Microsoft Visual Studio 9.0\Report Viewer\
C:\Program Files <x86>\Microsoft Visual Studio 10.0\Report Viewer\
C:\Program Files\Microsoft Visual Studio 10.0\Report Viewer\
C:\Program Files\Microsoft Visual Studio XX.0\Report Viewer\
where XX is the version
Please compare them. Make a right click on them.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs so my 2008 version of Mac Office and Intuit Quickbooks are blanked out. I need these programs. How do I proceed?

I just upgraded to Lion 10.7.2 and it says that it will not support Power PC programs and has blanked out my 2008 version of MS Office for Mac and Intuit's Quickbooks. How do I proceed to get these programs back?

Upgrade to newer versions compatible with Lion or downgrade to Snow Leopard:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Hi I just purchased a Mac Book Air and installed the 2008 version of Microsoft and office

I purchased a mac book air and installed the 2008 version of Microsoft Home and office.... would i need to purchase the latest version to upgrade
or is it upgradable through a download?

Office for Mac 2011 (or Office 365) are both available as downloads. Start at mactopia.com.
I would say they are not treated as "upgrades" to Office 2008. I don't believe there is any pricing discount for previous Office users, nor do I think the download uses any of the Office 2008 version and updates it. Whichever of the two current Office products you purchase would be considered an entirely new and different product.

Crystal Reports Version to Work With Vb 6 and VS 2008

Hi,
We have some legacy VB 6 applications which are too large to port over to Visual Studio which use Crystal 7.0
Recently at one site there have been problems with another application which uses a new version of Crystal. Either one or the other will work but not both. This might be solved by ugrading to Crystal XI R2 ( I believe that newer versions can run side by side). However, we also have new projects starting that are to be developed in VS 2008. As I understand it, Crystal XI R2 will not work with VS 2008 and CR 2008 will not work with VB 6.
We really donlt want to have to buy both versions !!
Anyone got any ideas ?
Many Thanks
Paul

CR 7 did not support side-by-side installs. Likely what is happening is the your app and the other app is loading crpe32.dll from the \windows\system32 folder. Which obviously will not support each other. This is the only dll that is common among all versions of CR, see below for more info, and that due to it's location can cause issues like this. Newer versions from 8.5 do version checking and athough the dll's have the same name XI R2 will not load other versions, there are exceptions. The exceptions are UFL and some legacy database drivers that will work in any and all versions.
A few possible work arounds, in your app do version checking when loading crpe32.dll or specifically if crpe32 is residing in a memory space that some other app has loaded it and Windows will share, check the version of the dll and if in your case it's not 11.5.x.x. then pop up a message indicating they must close the other Crystal app before continuing.
Move all the runtime files into the applications startup folder, what's specified in the Icon on the your desktop or short cut. Moving them there may fix this, we start looking for our runtime where your EXE is located and then in the working Folder, then in the \system32 folder and finally down the PATH statement. We also have hard coded specific location in our load methods. In this case you may have to rename the \windows\crystal folder from the CR 7 install. But I don't recall if this will break the CR 7 app.
Also if you are moving the version 7 runtime or the other app it may break that application so make note what you did so you can restore it. Also highly suggested to back up everything and test this on a test machine before applying to the production PC's.
You can use tools like Filemon and modules from our site. You can get filemon from www.sysinternals.com.
Other than that it will not likely work due to 7 not supporting side-by-side and will load anything it finds. And of course, Don't support or install both versions of software on the same PC.

Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too. Thanks Dave UK

Hello. I have two version of Office for Mac. 2008 and 2001. I want to delete the 2008 version. If I use the removal tool within the Offie 2008 folder, is there any danger of the 2001 version being removed too. Thanks Dave UK

Do you mean Office 2008 and 2011 or do you really want Office 2001? I think you mean 2011 since Office 2001 wouldn't make much sense.
The Office uninstaller should be able to identify there are two versions and allow you to delete either one or both.

New MacBook Pro appearing with Iphoto, Imovie and Iweb all 2008 versions

I bought a MacBook Pro in March 2013 (new from best buy) and it's running os x 10.8.4. However, for some reason the Iphoto, Imovie and Iweb are all 2008 versions. I used an external hard drive to transfer from my old macbook to the new macbook. What went wrong? Why wasn't the new version of Iphoto, Imovie and Iweb on my computer?
Should I back up onto my external again and reinstall? I had a lot of trouble transfering the data over in the first place because some security software from my school was messing with the transfer, however once it was deleted everything went smoothly. Thoughts?

You migrated your files from an older computer. If you migrated apps, iLife applications were transferred, so you have an old iLife edition.
The only thing you have to do is to open Finder, choose Applications in the sidebar and delete iLife apps. Then, open the App Store, go to Purchases tab and download iLife applications free of charge. All Macs come with iLife applications free of charge

I have a 2008 macbook and want a version of iMovie that can do slow motion, which one and how?

I want to edit a short video for fun and the '08 version cant do slow motion. When i tried to get iMovie '11 or whatever it wouldnt let me because i don't have apple's newest laptops.
i'm not buying a new laptop. what do? any suggestions on video editing software? No, i don't want to spend money on this really... i just want to tinker around with short videos.
Thanks!

Start here.

In place upgrade to 2012 R2 fails, Setup can't continue. Your computer will now restart, and your previous version of windows will be restored.

I have multiple Windows Server 2008 R2 machines in which I am attempting to do an in place upgrade to 2012 R2, and it is repeatedly failing.
Setup gets all the way through, and it says Getting ready, followed immediately by an error saying: Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
I am attempting to install:
Windows Server 2012 R2 Datacenter (Server with GUI)
x64 Date modified 3/18/2014
I have found several posts, many discussing how disk space can be an issue, I have increased disk space so it shouldn't be an issue. I have also made sure the only only partition on disk 0 is C: and system reserved.
I have disabled all unessential services and went through and removed all unessential applications, and extras. Still getting the error.
Here is the update log
2014-11-24 08:20:20:715
888 ed8
AU AU initiates service shutdown
2014-11-24 08:20:20:715
888 ed8
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:20:20:840
888 ed8
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:20:20:840
888 ed8
Service *********
2014-11-24 08:20:20:840
888 ed8
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:20:20:840
888 ed8
Service *************
2014-11-24 08:23:27:265
892 9a0
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0500) ===========
2014-11-24 08:23:27:281
892 9a0
Misc = Process: C:\Windows\system32\svchost.exe
2014-11-24 08:23:27:281
892 9a0
Misc = Module: c:\windows\system32\wuaueng.dll
2014-11-24 08:23:27:265
892 9a0
Service *************
2014-11-24 08:23:27:281
892 9a0
Service ** START ** Service: Service startup
2014-11-24 08:23:27:281
892 9a0
Service *********
2014-11-24 08:23:27:635
892 9a0
Agent * WU client version 7.6.7600.320
2014-11-24 08:23:27:635
892 9a0
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-11-24 08:23:27:635
892 9a0
Agent * Access type: No proxy
2014-11-24 08:23:27:635
892 9a0
Agent * Network state: Connected
2014-11-24 08:24:14:827
892 9a0
Report CWERReporter::Init succeeded
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-11-24 08:24:14:827
892 9a0
Agent * Prerequisite roots succeeded.
2014-11-24 08:24:14:827
892 9a0
Agent *********** Agent: Initializing global settings cache ***********
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * WSUS status server: <NULL>
2014-11-24 08:24:14:827
892 9a0
Agent * Target group: (Unassigned Computers)
2014-11-24 08:24:14:827
892 9a0
Agent * Windows Update access disabled: No
2014-11-24 08:24:14:951
892 9a0
DnldMgr Download manager restoring 0 downloads
2014-11-24 08:24:14:981
892 9a0
AU ########### AU: Initializing Automatic Updates ###########
2014-11-24 08:24:14:997
892 9a0
AU # AU disabled through Policy
2014-11-24 08:24:14:997
892 9a0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-11-24 08:24:15:043
892 9a0
AU Initializing featured updates
2014-11-24 08:24:15:043
892 9a0
AU Found 0 cached featured updates
2014-11-24 08:24:15:397
892 9a0
Report *********** Report: Initializing static reporting data ***********
2014-11-24 08:24:15:397
892 9a0
Report * OS Version = 6.1.7601.1.0.196880
2014-11-24 08:24:15:397
892 9a0
Report * OS Product Type = 0x00000007
2014-11-24 08:24:15:428
892 9a0
Report * Computer Brand = VMware, Inc.
2014-11-24 08:24:15:428
892 9a0
Report * Computer Model = VMware Virtual Platform
2014-11-24 08:24:15:428
892 9a0
Report * Bios Revision = 6.00
2014-11-24 08:24:15:428
892 9a0
Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-11-24 08:24:15:428
892 9a0
Report * Bios Release Date = 2013-07-30T00:00:00
2014-11-24 08:24:15:428
892 9a0
Report * Locale ID = 1033
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU Successfully wrote event for AU health state:0
2014-11-24 08:24:15:582
892 9a0
AU AU finished delayed initialization
2014-11-24 08:24:20:865
892 6a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:187
892 9a0
AU AU initiates service shutdown
2014-11-24 08:55:38:187
892 9a0
AU ########### AU: Uninitializing Automatic Updates ###########
2014-11-24 08:55:38:250
892 9a0
Report CWERReporter finishing event handling. (00000000)
2014-11-24 08:55:38:297
892 9a0
Service *********
2014-11-24 08:55:38:297
892 9a0
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-11-24 08:55:38:297
892 9a0
Service *************
Any ideas on how I can resolve this, or further troubleshoot?

I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!.

Final Cut Pro 7 not recognizing Sony HDV Deck on older 2008 version MacPro's

I am trying to connect a Sony HDV deck to Final Cut Pro version 7 on an older 2008 version MacPro. The problem was with the firewire mini port on the back i believe because i used a different deck which was the same model - but the only difference was it had a firewire 400 port instead of mini firewire port. Anyway, the deck with the 400 firewire port worked for logging and capturing, etc... (this also worked when i re-tested it on the 2008 MacPro) Im wondering if anyone else has had problems with the firewire mini port on the Sony HDV deck because it seems like almost every HDV deck i have with mini firewire has problems connecting to final cut pro or any editing application. I know now that the deck i had in question the mini port is not working correctly but is there a way to fix this or prevent the cable - deck from terminating the connection with the mini cable being used. I dont need an answer to the deck problem because i figured it out but just wondering if anyone has some insight on this deck problem. Thank you...
Kyle

>I dont need an answer to the deck problem ... just wondering if anyone has some insight on this deck problem
So you don't want an answer, just insight. OK, I'll give it a go. I've had several Sony VTRs with the 4pin Firewire port (proper name for what you refer to as "mini"), which is the same type of port that most DV and HDV cameras use as well. One of the main things you need to be wary of is plugging in and unplugging a Firewire cable while either the device or the computer is powered on. I know that marketing hype claims that Firewire is hot swap-able, but it really isn't safe to do so. The pins in both the 4 pin connector as well as the 6 pin connectors are very close together and if they aren't aligned exactly right with the socket, can easily cause arching and damage a Firewire port on either or both ends. Is that the kind of insight you were looking for?
-DH

What is the correct CIM model and CR content version to import into SLD?

Hi All,
I just met a difficulty that I can not find the correct import version of CIM model and CR content.
Could anyone share some valuable suggestions?
Situations now:
I installed ECC6 SR3 with ABAP+ Java stacks, after installation successfully, I logged onto SLD through http://xxx:50000/sld
since my CIM model and CR content version is too low, so I want to upgrade it.
The currect version is as below:
Model Version (sld/new):     1.5.24
SAP CR Content Version (sld/new):     SAP_CR 2.0 (produced 03/17/2005)
Namespace     Model Version     Classes     Instances     Associations     Total Objects
sld/active      1.5.24               908     36381     60183             97472
I have read note 669669 carefully and downloaded all the relevant versions before updating, the the results are not correct. something like "Unknow status -1" "import anyway" appears.
So, could anyone tell me the correct update file and sequence?
Thank you very much in advance.
Best regards,
Nick

Hi Raghu,
Thanks for your quick reply.
I have downloaded 5 files:
cimsap51506_0-20005942.zip     SP06 for SAP CR CONTENT UP TO 2009
CRDelta1418_0-10003379.ZIP     SP18 for SAP CR CONTENT 2.0
CRDelta1511_0-10004549.ZIP     SP11 for SAP CR CONTENT UP TO 2007
CRDelta41514_0-10006428.ZIP     SP14 for SAP CR CONTENT UP TO 2008
CRDelta51506_0-20005942.ZIP     SP06 for SAP CR CONTENT UP TO 2009
and the update sequence are the same as above, that is to say, first I update CIM model version successfully from 1.5.24 to 1.5.45, and then, I upload CRDelta1418_0-10003379.ZIP which gave me an error message "Unknown status -1", even how many times I click "Import anyway", it's useless.
after then, I tried to upload CRDelta1511_0-10004549.ZIP directly, but it also refused. warning message is "The selected aggregate import is not applicable to the current content version SAP_CR 2.0 of the target namespace.", I clicked button "Import anyway", but it's useless since there contains 0 objects, I don't know why, the message shows "The import will upgrade the content of export line SAP_CR from the current version 2.0 to version 4.0.
Contains 0 objects."
The file CRDelta1511_0-10004549.ZIP is under SAP CR CONTENT UP TO 2007, why its version is 4.0? is it because I need to firstly update to 3.0? and where can I find version 3.0?
I really appreciate your kind help.
Best regards,
Nick

CR XIr2 and CR 2008 in BOE XI 3.1

I am looking for a document detailing how to install CR XIr2 and CR 2008 on same client. I need both of these apps to be able to post to BOE XI 3.1 is this possible? How will I be able to tell once a report is published if it is a r2 or a 2008 version.
Thanks
Bryan

Hi Brain,
We can install multiple versions of a crystal on same server.
We can publish the CR XI R2 and CR 2008 reports to BOE XI 3.1 server.
But in the Enterprise there is no such option available to know which version the reports are developed.
As there is no such functionality avaialble till now , we need to manually run the reports in designer applications.
Regards,
Naveen.

CR XI R 2 and CR 2008 does not render Khmer Unicode correctly

Post Author: khmerangkor
CA Forum: General
Having evaluate CR XI R 2 and CR 2008 in Visual Studio 2005 and Visual Studio 2008. The result:When I work with Crystal
Report Application itself is fully supporting the Khmer Unicode. Then
I include it into VS 2005 and 2008, it does not support Khmer Unicode at all. Basically, it does not render at all. Hope Crystal Report Development Team look into this problem and help us to develop report in Khmer Unicode. We belive in your product.Regards,Khmer

Don,
the problem seem to be that Version XI Rel 2 is not only an Upgrade of Version XI (for what I just purchased a license) but a special Version.
So I have the Trial Version XI Rel 2 and my Reg. Key does not comply with it.
I Think SAP ony gives the user the right to use Version XI Rel 2 I you buy a full Version (even if you are Crystal reports Customer for 15 years).
Very diffuse and time wasting the whole thing. I hope my old projects still using Crystal reports will soon run out of use.
Cheers for your efforts
Miko

Execute the SSIS packages (2008 version) using SQL job 2008

We need to execute the SSIS packages (2008 version) using SQL job Please help with details information how to execute it.
1.Protection level of the SSIS packages.
2.Configuration File (Curently using XML file)
3.Please provide details how to create Credential (Windows User etc) Do we need to create windows cred explicitly to run the Job etc..
4.Please provide details for creating Proxy.
5.How can we configure the xml file since the xml is reading from local box but when the package is moved from developement box to production box
then the local drive might not be mapped with Production box .
6.Roles that need to be tagged for the Proxy/Credential.
7.Which is the best and safest way to execute ssis packages either msdb deployment or filesystem deployment and other necessary details.

Hi,
If you want to Execute your SSIS package using SQL job then best solution is to first deploy your Package
either using msdb deployment or filesystem deployment.The simplest approach to deployment is probably to deploy to the file system.
So, here is the deployment steps;
There are four steps in the package deployment process:
    The first optional step is optional and involves creating package
configurations that update properties of package elements at run time. The configurations are automatically included when you deploy the packages.
    The second step is to build the Integration Services project to create a package deployment utility. The deployment utility for the project contains the packages that you want to deploy
    The third step is to copy the deployment folder that was created when you built the Integration Services project to the target computer.
    The fourth step is to run, on the target computer, the Package Installation Wizard to install the packages to the file system or to an instance of SQL Server.
you can use below link also;
http://bharath-msbi.blogspot.in/2012/04/step-by-step-ssis-package-deployment.html
After that you need to Schedule package using SQL Agent then Have a look at the following link. It explains how to create an SQL job that can execute an SSIS package on a scheduled basis.
http://www.mssqltips.com/sqlservertutorial/220/scheduling-ssis-packages-with-sql-server-agent/
Deployment in msdb deployment or filesystem deployment has there own merits and demerits.
For security point of view msdb deployment is good.
it provides Benefits from database security, roles and Agent interaction
Protection Level;
In SQL Server Data Tools (SSDT), open the Integration Services project that contains the package.
Open the package in the SSIS designer.
If the Properties window does not show the properties of the package, click the design surface.
In the Properties window, in the Security group, select the appropriate value for the
ProtectionLevel property.
If you select a protection level that requires a password, enter the password as the value of the
PackagePassword property.
On the File menu, select Save Selected Items to save the modified package.
SSIS Provide different Protection levels;
    DontSaveSensitive
    EncryptSensitiveWithUserKey
    EncryptSensitiveWithPassword
    EncryptAllWithPassword
    EncryptAllWithUserKey
    ServerStorage
For better undertsnading you can use below link;
http://www.mssqltips.com/sqlservertip/2091/securing-your-ssis-packages-using-package-protection-level/
Thanks

SAP Conversion Agent for PI 7.1 EHP 1 and Windows 2008 Support

Hello
I have read that some people were able to run SAP Conversion Agent on a PI 7.1 EHP1 Installation on Windows 2008 Sever. But in the Product Availability Matrix there is no support for 2008 yet.
In the SAP Library (http://help.sap.com/saphelp_nwpi71/helpdata/en/43/fc39c16bfb025ee10000000a1553f7/frameset.htm) under the release notes for SAP Conversion Agent there is still version 8.5, but when I install the actual Support Package I have Conversion Agent 8.6 running and according to information on the informatica.com site this version is running under 2008!
Has anybody clear and actual information about which OS the newest SAP Conversion Agent for PI 7.1 EHP1 supports? Or has anyone experiance on Conversion Agent and Windows 2008 Server?
Thanks
Christoph

Hi Mark
Thanks for your reply! Fact is that in the actual Package (SP06) the version of Conversion Agent Engine supplied is not 8.5.5 as in the SAP Note mentioned, it is version 8.6.0:
C:\Documents and Settings\pi1adm>CM_console -v
Engine-Version: 8.6.0(Build:30)
Engine-Syntaxversion:4.00.10
I will oben a ticket for that ...
Regards
Christoph

BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2

The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 Consulting

Hi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo

MS12-070 and RSCLientPrint 2008 versions

Similar Messages

Maybe you are looking for