MS14-018 wrong version trying to install

We have over 20K clients that have succesfully installed MS14-018. While evaluating a few clients that did not I found one that is trying to install the wrong version.
The client has MSIE 8 installed, but in the windowsupdate.log I clearly see it saying that is is installing the MSIE 9 version of MS14-018. It then says it installed correctly, and event viewer backs it up. However the client is still
not compliant, the patch is missing, and a check of the files show the old versions.
Why would a client attempt to install the wrong version of a patch? Is WUA corrupt? Should I reinstall or just delete SoftwareDistribution? Any other options to kick of the correct install?

Apparently the patch is now being properly identified by WUA. I still don't know why it was selecting the wrong patch at the start. THe client did not roll back MSIE to an earlier version.

Similar Messages

Wrong version, will not install PSE 13

I get the error message when trying to instal PSE 13: ERROR: This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements. ERROR: System check returned with error : 6 What do I do?

That was all it took!!!! Thanks so much Barbara, can't tell you how greatful I am that you took the time to comment. much appreciated,

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I am getting this error message when trying to install free version of photoshop..."This application

I am getting this error message when trying to install free version of photoshop..."This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance. What am I doing wrong?

From the error message it appears that you are facing difficulties with the Adobe Download Assistant. The error message is related to Adobe AIR which the Adobe Download Assistant utilizes. Please remove your current installation of Adobe Download Assistant and reinstall. You can find more details under the known issues section of Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Known_i ssues.

OIM 11g install error INST-07286 mw_home has wrong version weblogic

Hi gurus,
I have been trying to install OIM 11g from past few days
1. I have installed Oracle 10.2.0.5
2.I installed weblogic 10.3.3 by downloading from Oracle website , wls1033_dev.zip
3.I ran Rcu utlity 11.1.1.3.3
4. I installed SOA 11.1.1.2.0.
I am trying to upgrade soa to 11.1.1.3.0 using ofm_soa_generic_11.1.1.3.0_disk1_1of1.zip
It gives me error
INST-07286 Specified Oracle Middle ware home does not contain weblogic version 10.3.3 , upgrade to crrect version and then retry
It does not let me further.
Can some one please help /advise ?
Thanks,
Pandu

Hi Gurus,
I think I found the answer.
I downloaded wrong version of weblogic
I had linux 32 , and wanted weblogic 10.3.3, So I went here ( row 3 , column 2)
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
file name = wls1033_dev.zip
well I was wrong it was not 10.3.3 or something was wrong. SOA installer did not recognise it as 10.3.3.
Who is to blame. I wasted 3 days I hope Oracle keeps right versions in its website for download.
I got the right one from edelievry
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11493750
and download =
Download Oracle WebLogic Server 11gR1 (10.3.3) for Linux x86 V21014-01 703M
Hope this helps some one.
Thanks!

Strange solution to "Something went wrong trying to install this application."

Basically the solution was to install
AIR
Beta 3 then install the AIR 1.0, copy "Adobe AIR Application
Installer.exe", "Adobe AIR Application Installer.swf", and "Adobe
AIR.dll" from the C:\Program Files\Common Files\Adobe
AIR\Versions\1.0 directory into the AIR beta 3 directory which I
think was "C:\Program Files\Common Files\Adobe AIR\Versions\1.0.6".
Then, I associated the .air file with the "airappinstaller.exe"
executable located in the AIR beta 3 directory. Amazingly, doing
this allowed me to install the AIR application without any
problems.
The problem this addresses is getting the message "Something
went wrong trying to install this application." every time I tried
to install an AIR application. The exact error message is below. I
assumed that I was having problems because I had installed an AIR
beta in the past. I'm not for sure on that though. The AIR
installer log seemed normal. At least there were not any error
messages that I could see. The AIR application installer log did
not output any data for me. I followed the instructions from
this
blog on setting up the installer logs.
Here is the error message:
Adobe AIR
Something went wrong trying to install this application.
Please install the latest version of Adobe AIR from
http://www.adobe.com/go/getair
and then try again.
OK
---------------------------

Basically the solution was to install
AIR
Beta 3 then install the AIR 1.0, copy "Adobe AIR Application
Installer.exe", "Adobe AIR Application Installer.swf", and "Adobe
AIR.dll" from the C:\Program Files\Common Files\Adobe
AIR\Versions\1.0 directory into the AIR beta 3 directory which I
think was "C:\Program Files\Common Files\Adobe AIR\Versions\1.0.6".
Then, I associated the .air file with the "airappinstaller.exe"
executable located in the AIR beta 3 directory. Amazingly, doing
this allowed me to install the AIR application without any
problems.
The problem this addresses is getting the message "Something
went wrong trying to install this application." every time I tried
to install an AIR application. The exact error message is below. I
assumed that I was having problems because I had installed an AIR
beta in the past. I'm not for sure on that though. The AIR
installer log seemed normal. At least there were not any error
messages that I could see. The AIR application installer log did
not output any data for me. I followed the instructions from
this
blog on setting up the installer logs.
Here is the error message:
Adobe AIR
Something went wrong trying to install this application.
Please install the latest version of Adobe AIR from
http://www.adobe.com/go/getair
and then try again.
OK
---------------------------

Adobe Air on Mac: "Something Went Wrong Trying to Install This Application" Error

I have been reading several posts on this, but nowhere can I find a solution. Within the past few weeks, I receive this error any time I try to install a new AIR application:
"Something Went Wrong Trying to Install This Application. Please install the latest version of AIR from.."
Then it gives me the download link. I've tried reinstalling, but that doesn't fixt the issue. I'm using OS X 10.6.3- is there ANY way to solve this?

Hi Jason. Can you post your install log here so we can take a look at what the problem may be? To see the install log, Open "Console" to view logging. Then copy and paste the log here.
In the meantime, try to uninstall AIR before reinstalling AIR to see if that fixes the problem.
Thank you!
-Lisa Chao
AIR QE

I have tryed to instal upadate to firefox 6.0.2 like 5 times lately, and it goes through all the motions of doing an update, and even told me it was complete, then it still is the last version!

i have tried to install the newest version about 5 times now, everytime that i try, it goes through the steps, all the way to where it says finish! i have tried doing it standard install and custom install. i've tried doing it straight from other websites telling me that i need an updated version... ie. hotmail, facebook, and i've also gone to mozilla.com, and it always does the same thing, what am i doing wrong?

Something that you have installed has changed your User Agent or is keeping your User Agent from updating with the new install/update of Firefox. I suspect that it is Fast Browser Search which is shown as part of your User Agent. To get rid of Fast Browser Search do the following:
#Close Firefox (Firefox button > Exit '''''OR''''' File > Exit)
#Open the Vista Control Panel and remove/uninstall "Fast Browser search protection" and "Fast Browser Search" (MyWebTatoo)
#*See --> http://windows.microsoft.com/en-US/windows-vista/Uninstall-or-change-a-program
#*Your User Agent: ''Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.0.15) Gecko/2009101601 Firefox/3.0.15 (.NET CLR 2.0.50727; .NET CLR 3.0.30729; .NET CLR 3.5.30729) '''<u>FBSMTWB</u>'''''
#*What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
#Start Firefox
#*Reset your User Agent following the instructions in the article below:
#**See --> [https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent Reset your user agent]
#*Check your Firefox version:
#**See --> [https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version Finding your Firefox version]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I tried to update itunes it corrupted the previous version, I'm trying to install new copy get this message "service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privleges to start system services." Help!

Not sure what to do. I've tried a system restore on my computer after the update in hopes of undoing the problem, that didn't work. I've tried to install, the new version of itunes for over two days now and I get to the point where it says "starting services" and it almost get's done and then it gives me that message " Service apple mobile device (apple mobile device) failed to start. Verify that you have sufficient privledges to start system services." Then it gives me three options to click on "abort", "retry" or "ignore". I've tried to retry over and over and it does no good, I just get the same message. I've tried ignore and the one time it did finish installing itunes, it didn't work, I got error messages telling me that it failed to download properly and I needed to delete the program and download it again. I thought maybe it had something to do with my ipod not being pluged into the computer so I pluged that it and it's still giving me the same message. I just don't know what to do. I'm very frustrated and I would really appreciate it if someone could help me. I'm completely out of ideas.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Tried to open a file I created in Numbers a while ago which I modified on 11/4/13 and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed. Any suggestions?

Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it. When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3". Any suggestions as to how I can get the new version installed?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

Im trying to install new version of itunes in my macbook but its always failed .i can download but cannot install says to contact with software manufacturer assistance....please solve my problem because of this i couldnt connect my iphone to my mac.....

im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....

Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to  > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

I am trying to install the newest version of Itunes and it fails with the message "Program cannot start MSVCR80.dll is missing from your computer. Try reinstalling program to fix this program.I have tried reinstalling several times but get same results

I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.

Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10. I get the message "Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problem

Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

You run Windows in Parallels or Fusion. Then in Windows you install the program.

MS14-018 wrong version trying to install

Similar Messages

Maybe you are looking for