MS14-055 security update for Microsoft Lync Server 2010
hello
after applying this security update do I need to Apply it to the back end database? or is that just when regular patches are applied?
Hi totalnet32,
From http://support.microsoft.com/kb/2493736, we know that
"After you install the update for the Core Components server role on a Lync Server 2010 Enterprise Edition front end server, the updated SQL database files are dropped to the computer that has the Core Components server role installed.This
also applies to a Lync Server 2010 Standard Edition server. To apply the database changes, run the following cmdlets:
Install-CsDatabase -Update -ConfiguredDatabases -SqlServerFqdn <EEBE.Fqdn> -UseDefaultSqlPaths
2982388
(https://support.microsoft.com/kb/2982388/ )
MS14-055: Description of the security update for Microsoft Lync Server 2010 (Response Group Service): September 9, 2014
2982385
(https://support.microsoft.com/kb/2982385/ )
MS14-055: Description of the security update for Microsoft Lync Server 2010 (Security update for Standard/Enterprise edition Server): September 23, 2014
There's no Core Components server role update, as far as my experience, the DB update is not required.
And I suggest that reboot the Lync Servers once after the updates have been installed.
Best regards,
Eric
Similar Messages
-
Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003 -
OIM connector for Microsoft Lync Server
Experts,
Do we have any OIM connector for Microsoft Lync Server (previously Microsoft Office Communications Server)?
If not how can we integrate it with OIM for user provisioning ?
Please suggest.
Thanks,
S M.Hi,
Oracle doesn't have Lync connector . You can install the 11.x Exchange/AD connectors and after AD/Exch provisioning , you can write a task to execute your custom power shell which can set lync related attributes in AD/Exchange .
Hope this helps .
Regards
Suren -
Security Update for Microsoft visual C++ 2008 Service pack redistributable package
HI, I need help? I received an IMPORTANT UPDATE FOR Windows 8.1 and later drivers, "Security Update for Microsoft C+ + 2008 Service Pack 1 Redistributable Package (KB2538243)". I tried to find more information on this update,
but I did find an update just like it but it was for "2013" instead of "2008". my question is, Do I have to install this exact update? My computer has been updated to windows 8.1.. I don't know if that makes any difference either,
or Can I find an newer version of the "Security Update for Microsoft visual C Service pack Redistributable package ". Also received this one SAMSUNG Electronics Co., Ltd - Other hardware -"SAMSUNG Mobile USB composite Device."
after I had unplugged my phone from the USB port, on laptop. I couldn't find much information on it either an if I really needed it I usually don't have my phone plugged into the USB port on my laptop that was like the second time that it has
happened when the electricity went out to charge it. my question is do I really need to install Visual studio 2008 or newer an do I need the SAMSUNG MOBILE USB composite device and what are they?
Does anyone know what Microsoft Silverlight (KB2977218) is, is it important and do I need it? Can anyone help me please?
Thank you for your help..
Thanks Tina MausHello Tina Maus,
Do you receive an important update KB2538243? Please share us a screenshot for better analyzation.
As you use the Windows 8.1, it is recommended to install the Visual C++ Redistributable Packages for Visual Studio 2013.
http://www.microsoft.com/en-hk/download/details.aspx?id=40784
It supports Windows 8.1.
Do you use SAMSUNG mobile phone?
And about the SAMSUNG Mobile USB composite Device, to receive better support, it is recommended to contact the SAMSUNG support.
Silverlight is a powerful development tool for creating engaging, interactive user experiences for Web and mobile applications. But if you are not a developer, it is not necessary for you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Hi Guys,
We were trying to “Install the Mobility Service and autodiscover Service” on lync 2010 frontend server, for which we have downloaded the “McxStandAlone.msi” and placed in
“C:\ProgramData\Microsoft\Lync Server\Deployment\cache\4.0.7577.0\setup” location.
As per the document, to execute this we have to run the bootstrapper.exe from the lync powershell at the following location
“C:\Program Files\Microsoft Lync Server 2010\Deployment\Bootstrapper.exe”
But “Deployment folder and bootstrapper exe” are not present in mentioned location.
So is there any workaround for this ?
Thanks and Regards,
AnkitDid you happen to install Lync on another drive? Maybe D:?
Also try to run the Lync Deployment Tool and click "Install or Update Lync Server System" and rerun "Setup or Remove Lync Server Components". This should do the same thing as running the bootstrapper.
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Problems launching Microsoft Lync Server 2010 Control Panel
Just finished setting a new Lync 2010 environment. I was able to get passed some errors with the Archiving and Monitoring stores. I ended up removing those server roles to get the setup completed. Now, when I try launching the Microsoft
Lync Server 2010 Control Panel I get the following error:
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly
'System.ServiceModel, Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089'
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.TypeLoadException: Could not load type
'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel,
Version=3.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
If the Stack Trace is needed I will post, any help would be greatly appreciated in solving this error.
Thanks in advance,
HectorWere you playing with .NET versions at all?
https://support.microsoft.com/kb/2015129?wa=wsignin1.0
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Tandberg Codian MCU 4505 integration with Microsoft Lync server 2010
Hi,
We are trying to integrate Tandberg Codian MCU 4505 with Microsoft Lync server 2010.
We do not have any VCS in the setup.
If anybody has tried it before, please suggest configuration to be done on Tandberg Codian MCU 4505 and Lync server.
Regards,
RNHi,
so, i have the same environment. Lync 2013 and a cisco 1000V router on esxi with VRFs.
here is m config:
vrf definition Mgmt-intf
address-family ipv4
exit-address-family
address-family ipv6
exit-address-family
voice vrf Mgmt-intf
voice service voip
no ip address trusted authenticate
address-hiding
media disable-detailed-stats
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
bind control source-interface GigabitEthernet0
bind media source-interface GigabitEthernet0
listen-port non-secure 5066
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class codec 2
codec preference 1 ilbc
codec preference 2 g722-64
codec preference 3 g711alaw
codec preference 4 g711ulaw
interface GigabitEthernet0
vrf forwarding Mgmt-intf
ip address 172.16.1.164 255.255.255.0
negotiation auto
dial-peer voice 15 voip
tone ringback alert-no-PI
numbering-type unknown
preference 1
destination-pattern 4.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.2.207:5068
session transport tcp
voice-class codec 2
dtmf-relay rtp-nte
dial-peer voice 17 voip
numbering-type unknown
preference 1
destination-pattern 7.
rtp payload-type comfort-noise 13
session protocol sipv2
session target ipv4:172.16.1.32:5060
session transport udp
voice-class codec 2
dtmf-relay rtp-nte
gateway
timer receive-rtp 1200
sip-ua
keepalive target ipv4:172.16.2.207:5068 tcp
172.16.1.32 - Asterisk with a extensions on it.
172.16.2.207 - Lync 2013 mediation server with other extension on it
i can call from Asterisk extension via router and to Lync extension.
i cannot call from Lync to Asterisk.
TCP session with the router from Lync on port 5066 does not come up. three way handshake seems to come up.
strange. lync person seems to configured everything correctly
any thoughts? -
Is there any Collector for Microsoft Exchange Server 2010?
Dears All,
Sentinel currently provide only Microsoft Exchange Server 2007 SP1,
But our customer exchange version is exchange 2010, Is there any
Collector for Microsoft Exchange Server 2010? Thanks!
steve_zeng
steve_zeng's Profile: https://forums.netiq.com/member.php?userid=3875
View this thread: https://forums.netiq.com/showthread.php?t=46984steve_zeng;226167 Wrote:
> Dears All,
>
> Sentinel currently provide only Microsoft Exchange Server 2007 SP1,
> But our customer exchange version is exchange 2010, Is there any
> Collector for Microsoft Exchange Server 2010? Thanks!
There's a pre-release build of the exchange collector available for
2010, just contact NTS.
If you need a full formal release, we're looking to have 2010 and 2013
support by approximately mid-year.
brandon.langley
brandon.langley's Profile: https://forums.netiq.com/member.php?userid=350
View this thread: https://forums.netiq.com/showthread.php?t=46984 -
Security updates for OS X Server 10.5.8?
Hello all,
I'm currently running OS X Server 10.5.8 on a PowerPC Mac Mini. Is Apple providing security updates for this version anymore, since it's the last one to work on PowerPCs? Is there an end-of-life chart for Apple products somewhere? If Apple is no longer providing security updates, what have those of you running servers on PowerPCs moved to? Ubuntu?
Thanks!1. No.
2. Apple typically releases security updates for the three most recent Mac OS X releases; as of now, those are Mountain Lion and newer.
(123618) -
Installing the connector for microsoft exchange server 2010
Hi All,
We have installed AD connector 9.1.1.7.0 with OIM 11.1.1.5.0.
Now Team is upgrading to Microsoft 2010 exchange server. As of now there is no direct provisioning for microsoft exchange server.
Now we are trying to install connector for microsoft exchange and do the provisioning.
So, what is the connector version should i use Microsoft 2010 exchange.
can i install 11.1.1.5.0.Any help would be appreciated.
Also please provide the minimum details which are required to connect to target exchange server or please suggest us some doc.
Thanks in Advance.Hi Rajiv,
Thanks for the reply. Can you please tell which version of connector i have to download?
Thanks In Advance -
Navigation to webpage was canceled when opening Microsoft Lync Server 2010 Control Panel
Ok, yes I know there are many threads with similar titles, but my problem is different in that it doesn't happen every time.
The first time I access the Control Panel I get the error:
"Navigation to the webpage was canceled
What you can try:
Refresh the Page"
Clicking Refresh the Page works, kind of. It brings up the admin console, but I get the spinning lights, which eventually resolves to an error at the top of the page that reads: "An operation failed. Network communication failed. Verify
your connection and try again."
Then if I click to other parts, things seem to be fine for the most part, I sometimes see the Network error, and often it is slow.
Port 443 is running through an HLB and this is setup exactly like my other Lync cluster, which doesn't have this issue. Internal web services URL is lynccontent and points to HLB VIP. Admin redirect is lyncadmin and points to HLB VIP.
Going to the /cscp page of each FE or of the pool from IE works every time, but lyncadmin seems to have the same issue (at least on FE1).
Any thoughts?Hi,
Could you perform the followings:
Make sure there're no duplicate records in the DNS Servers
Flush your DNS Cache at the Server & Client
Refresh any DNS Cache at the HLB (if any)
When the error appears, right click on the console and provide a screenshot on this
If you suspect that FE1 is the culprit, had you tried turning it off and monitor the situation?
Thanks!
James Ooi MCITP Lync Server 2010 | Blog: http://jamesosw.wordpress.com | Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread -
MS13-002 Security Update for Microsoft XML Core Services 4.0
I've tried to cache this patch 3 times now for my client and each time, it shows as cached but when trying to remediate it, it fails to cache to the client. Has anyone else had problems with this one? For now, I've disabled it but since it's listed as critical, I'd like to resolve the issue.
AMost likely running into this wonderful error that I hope is fixed sooner or
later. I got it with some of the new patches also.
http://www.novell.com/support/kb/doc.php?id=7009993
Server - ZCM 11.2.2 MU1 and Internal Database on Win2008R2x64
Client - ZCM 11.2.2 MU1 on Win7SP1x64 and WinXPx32
"princea" wrote in message [email protected]..
I've tried to cache this patch 3 times now for my client and each time,
it shows as cached but when trying to remediate it, it fails to cache to
the client. Has anyone else had problems with this one? For now, I've
disabled it but since it's listed as critical, I'd like to resolve the
issue.
A
--Alisia
princea's Profile: http://forums.novell.com/member.php?userid=2278
View this thread: http://forums.novell.com/showthread.php?t=464256 -
When I deployed my software updates this particular one shows that there is some hash mismatch. So I deleted it from the package, the software update group, and the data library in the content library on my DP.
Then I wanted to re-download it and re-deploy it, but it does not show up at all in the "All Software Updates" section.
Am I missing something here?
ThanksI did click that bar, Peter, and it still does not show that update.
Is this just me, or is this really odd?
I was able to successfully re-deploy this update by going into the update group created by the ADR and downloading that update in my 2014 package that it needed it to go into (the ADR that I currently have is for my 2015 package that will start running in
January, but when I ran it, it went into the 2015 package). Then I right clicked on the software update and added it to my DEC 2014 update group by selecting the "Edit Membership" option and then I checked on the "DEC 2014" box.
After that, I just updated the DP and then ran the necessary client actions from the Right-Click Tools from Now Micro on my collection and it installed just fine.
The only update that shows up in the "All Software Updates" section is the 64-bit version of KB2899519, not the 32-bit that I am looking for.
But, I would really LOVE to know why this update is not showing up in the "All Software Updates" section.
Thanks -
Hi
Idenitfied the lync security update issue below on server....
Worker process exited prematurely. The process will be automatically restarted.
Process: 'C:\Program Files\Microsoft Lync Server 2010\Server\Core\RtcHost.exe' Exit Code: E0434F4D!_HRX! (No Message Text Found!_HRM!).
The KB2982385 has tried to installed and failed 7 times....and as such my lync edge server is down.
Found solution:
http://www.microsoft.com/en-us/download/details.aspx?id=44080&fa43d42b-25b5-4a42-fe9b-1634f450f5ee=True
Downloaded patch and then ran lyncserverupdateinstaller...however it doesnt recognise that there is a patch to be deployed or a component to update.
Further running the msp by itself results in:
The upgrade patch cannot be installed by the windows insteller service because thje program to be upgraded may be missing or the upgrade patch may be a different version...
Please advise how i can get this issue resolved.Hi,
Did you try to download and install the update manually?
Here is a similar case below, it seems something wrong when updating through Windows Update automatically.
http://social.technet.microsoft.com/Forums/en-US/dea0e9e2-8375-4599-b4cc-7a0cd45cd9de/kb-2982385-has-broken-my-edge-servers?forum=ocsedge
You can refer to the step of “Step 1: Install the cumulative updates”, choose “Method 3 Manual install” in the link below:
http://support.microsoft.com/kb/2493736
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Lync Server 2010 without Exchange UM -- Can I use Asterisk for a voicemail server?
As the title implies, I am wondering whether it's possible to use Asterisk for my Lync Server 2010 voicemail server instead of using Exchange 2010. (?) We are moving to the hosted Exchange solution in Office 365 and do not want to pay up to the UM feature
set.
Has anyone been able to get this working?we did this as well. listed for the SIP response code and redirected the call to external voicemail.
however answering the call and desiring to transfer the call to someone elses voicemail doesn't generate a SIP response code you can intercept. We jerry rigged a tech prefix to call outside for voicemail. but its annoying. forward your phone then unforward
the setting is lost.
Maybe you are looking for
-
Regarding payroll report abap hr
hi experts i have developed one payroll report for indian payroll its working fine for For View payroll periods like PC00 M99 CWTR - Wage type reporter i have used HRCM PAYROLL RESULTS GET this function module to fetch payroll results. Problem is my
-
Creative cloud applications keep asking me to login every time I launch an application
Creative cloud applications keep asking me to login every time I launch an application on a same machine. How to solve this problem? Windows 7 Professional.
-
Clear Cenvat clearing GL item through F-03
Hi.. After MIGO while excise is captured through J1IEX then Cenvat clearing GL become credit. And during MIRO Cenvat Clearing GL become debit. And last week company closed last financial year and carry forwarded to current year. Now I want to clear C
-
Link to Filemaker pro database from wiki fails
Has anyone tried to create a link from within a wiki page that can launch a filemaker pro 9 database residing on the Xserve? I'm able to create the link in the edit page but when I click to save, the underlining disappears and the link is no more. I'
-
Help converting binary to decimal.
Hi all. I'm taking a course in Java programming and so far its been a great experience. I'm currently stumped on one of my assignments and I am kindly requesting some assistance. Basically I have to convert a binary entry into its decimal comparison.