MS14-065 (Nov. IE update) breaks domain-based exception list for outdated ActiveX Blocking.

The November cumulative IE update (MS14-065) appears to break the domain-based exceptions for the new outdated ActiveX control blocking that is described here:
http://technet.microsoft.com/en-us/library/dn761713.aspx
We have the new IE group policies deployed in our environment to add domain exceptions for our enterprise to the outdated ActiveX blocking. This was all working perfectly prior to MS14-065. After installing that November update, our exceptions are no longer
working and users are getting the block message for their Java applications.
Our environment is Windows 7 SP1 x64 using IE 9. Domain Controllers are 2008 R2.
If I manually remove MS14-065 (falling back to MS14-056, October update) the exceptions all work again as expected. Re-installing MS14-065 (November update) causes the exceptions to stop working again.
Thanks,
Brian

Hello Brian,
What is your current situation?
Have you tried the solution as MVP IECustomizer and Robear Dyer mentioned?
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • Will Cisco be updating the Approved Disk Drive List for firmware 1.5

    Hi
    I just saw that cisco released firmware 1.5 which has support for 3TB drives. I am wondering if Cisco will be updating the list of Approved hard drives or will it now be QNAP who will be doing that?
    Thanks

    An updated Cisco Hard Drive AVL has been posted. http://www.cisco.com/en/US/products/ps10817/prod_maintenance_guides_list.html
    http://www.cisco.com/en/US/products/ps10817/prod_technical_reference_list.html
    If you are planning on migrating to QNAP branded firmware or have already done so, please refer to the QNAP Hard Drive AVL.

  • Is it possible to change the display value of a domain-based attribute?

    Hello,
    I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity.  However, I cannot find a way to display anything but the code value in the drop-down (see below).
    Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
    Thanks in advance!
    Ben Lezin

    1. In the explorer page, settings dialog, you can change the display format to show only name.
    2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
    a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
    b. Make a Business Rule to update Name when HierarchyName is changed.

  • Dynamic domain-based entity creation and relation to base entity

    Hi everyone -
    My first post here...  I have a base entity (PROJECT) with an attribute called RecordType (a domain-based attribute).  Depending on the value of RecordType, the business wants to use that result set as input for another reference entity, and then
    relate them together in a possible {one|many}-to-many relationship.  For example:
    If RecordType = Strategy, then there is a need to create a separate entity called STRATEGY with the results of that filter.  The PROJECT entity and STRATEGY now need to be related together in a PROJECT_STRATEGY relationship table.
    There seem to be a couple of options, but none are elegant, and some simply don't work:
    Option #1 (doesn't work): I create the relationship table (PROJECT_STRATEGY) with a domain-based attribute of the PROJECT entity and a second domain-based attribute of the PROJECT entity (but called Strategy), and then try to create a business
    rule that limits the selection of the second domain-based attribute by RecordType.  MDS tells me I can't use a domain-based attribute in the business rule.
    Option #2: I create a SQL Server view called STRATEGY (which is a query based on the PROJECT entity - "where RecordType = 'Strategy') and use that as the reference set.  However, there is now no way to utilize that result set inside MDS. 
    In other words, I cannot use it as a domain-based attribute in the PROJECT_STRATEGY relationship table.  This means that an external system/UI would need to enable the relationship selection and write back into the PROJECT_STRATEGY relationship table
    inside MDS.
    Option #3: I create a STRATEGY entity that is auto-updated (via SQL Server job) every 10 minutes or so from the PROJECT entity (can't figure out how to load a reference entity based on a result set from an existing entity).  This allows me to create
    two domain-based attributes in the PROJECT_STRATEGY table (as described in Option #1), but is also what I call a non-standard customization, so I have been reticent to go this route.
    So, my questions/comments are:
    Is there any way to make Option #1 work (using business rules)?
    Option #2: Our development team doesn't want to create a separate system/UI to relate the list of PROJECTs to the list of STRATEGYs and then write them back into the PROJECT_STRATEGY relationship table.  This also limits the ability to maintain the
    PROJECT_STRATEGY table inside MDS since the STRATEGY domain-based attribute would become a free-form attribute at that point.  Is there any way to register a view as a reference entity?
    Should I explore Option #3?  Non-standard, non-native functionality introduced into MDS (any system, really) is something I wanted to avoid, but only from a purity and possible upgrade standpoint.  Should I get over this?
    I have looked at derived and explicit hierarchies for the PROJECT entity, but they do not seem to apply in the scenario above.
    Has anyone tried to create {one|many}-to-many relationships between a base entity and a subset of that base entity without resorting to non-standard customizations within MDS?  Is this as bizarre as it sounds?
    Any help would be greatly appreciated.
    Thanks.

    Hi,
    I f you are going with rtti approach.... for dynamic creation....you can assign the checktable field in field cat
    ls_fcat-ref_table  = space.
        ls_fcat-ref_table  = 'ZST_DISTRIBUTED_EFFORT'.
        ls_fcat-ref_field  = 'WORK_EFFORT'.
        ls_fcat-rollname   = 'DPR_TV_EFFORT'.
        ls_fcat-domname    = 'DPR_WORK'.
        ls_fcat-reptext    = ls_fcat-fieldname.
        ls_fcat-scrtext_l  = ls_fcat-fieldname.
        ls_fcat-scrtext_m  = ls_fcat-fieldname.
        ls_fcat-scrtext_s  = ls_fcat-fieldname.
        ls_fcat-emphasize  = me->gc_flag_enable.
        ls_fcat-col_pos    = lv_counter.
    ls_fcat-checktable = ' '.
        APPEND ls_fcat TO lt_fcat.
    CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog           = lt_fcat
        IMPORTING
          ep_table                  = et_dynamic_table
        EXCEPTIONS
          generate_subpool_dir_full = 1
          OTHERS                    = 2.
      IF sy-subrc NE 0.
        es_message-id         = sy-msgid.
        es_message-type       = sy-msgty.
        es_message-number     = sy-msgno.
        es_message-message_v1 = sy-msgv1.
        es_message-message_v2 = sy-msgv2.
        es_message-message_v3 = sy-msgv3.
        es_message-message_v4 = sy-msgv4.
    Thanks,
    Shailaja Ainala.

  • IWeb update fix domain update?

    Has anyone tried the iWeb update yet? If so, does it fix the crash when updating the domain file? I'm not willing to be the beta tester anymore.

    I've found what was causing the problems with my site update. Using iWeb 1 I went in and deleted the pages of the site that were based on the "Photos" template in iWeb. Then using iWeb 2 I opened the site. When it prompted me to Update my Domain file, I clicked Update and it went through like a charm. I'll now have to re-create those photo pages, but the "bones" of my site are still intact. I'm not going to try to Publish until I get the site rebuilt, and then we'll see if I've got other problems to deal with.
    Hope this helps others with their issues!

  • Bulk Insert, Domain Based Attributes

    Hi
    I have a product model similar to the ProductSamplemodel that ships with MDS. i.e. Product Category, Product Sub Category entities. Both of these entities have been created to automatically generate a code - as a code does not exist in the business only a description.
    The product entity has both the category and sub category attributes as domain-based attributes which results in storing the code physically and also displaying the description.
    From a bulk insert scenario where the business has a number of new products that they want to add (due to a new range) I was suggesting that they use the Excel AddIn. This would allow them to cut and paste the data into the product entity. However as the category
    and sub category are domain-based Attributes they will need to know the ID – they will only know the name.
    From a MDS functionality point of view is it possible to get it to look up the code from the name?
    My current understanding on how to achieve this would mean I would need to have both code and name attributes on the Product entity for Category and Sub. The name attributes would be free text and the code attribute would be populated from a business rule.
    Downside to this approach is that you lose out on the nice dropdown pick list and the user does not know what a valid entry is as they can no longer select one.
    How is this usually implemented or handled in MDS?
    Cheers
    Kevin

    Hi Kevin,
    Another approach (if the one above does NOT suit you).
    Once again, as Reza suggested and  I agree with him totally, this is a job for SSIS.
    For what it's worth...
    Whilst I understand what you are trying to do, may I suggest another approach. What concerns me is users adding data willy-nilly and that YOU have no control as to what is going on. Secondly, what is more disconcerting is the thought of losing relational
    integrity, especially if you are using derived hierarchies within MDS. 
    I would handle this in a different manner, using SSIS and a filesystem watcher.
    Let the users submit their spreadsheets (with their updates) to a common directory on the server. Implement a .NET FileSystemWatcher (this takes 10 minutes for a Newbie). This file system watcher will launch a DOS batch file on the arrival of a spreadsheet
    within the given directory. The DOS batch file  fires a DTS exec to start an SSIS package. This package together with SQL Server procedures will ensure that the correct codes are obtained and the attribute data is correctly inserted into the correct Entities(with
    the correct relationships).
    While this sounds vague, I do it all the time. I am more than prepared to help you get going, should wish any assistance. I KNOW that this is not the answer that you are looking for HOWEVER it is perhaps the most effective.
    sincerest regards
    Steve Simon SQL Server MVP
    [email protected]

  • What are the things 10.6.8 update break?

    After the 10.6.8 update I am having so many issues,
    first, the %100 cpu usage of dock, disabled parallels, and now it is ok,
    then, a reboot and I am unable to login, I enter my password, it begins the login process, then logs me out,
    if I persist, it logs me in after a couple of tries, but each time a few of my applications are missing at random, and the environment is very very unstable, sometimes I see no desktop background, sometimes I start firefox and I am logged out again.
    I've seen some people suggesting removal of login items to resolve a similar but not the same issue, so I'm inclined to think overall, there is an issue with some applications which 10.6.8 update breaks.
    For starters my login items are:
    GrowlHelper
    Geektool
    EyeTv Helper
    Canon IJ Network scanner
    ituneshelper
    Magicprefs
    Sophosuiserver
    Does anyone have any problems with any of these?
    I only verified the parallels desktop 6 issue up to now.
    Model Name: MacBook Pro
      Model Identifier: MacBookPro6,2
      Processor Name: Intel Core i7
      Processor Speed: 2.66 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache (per core): 256 KB
      L3 Cache: 4 MB
      Memory: 8 GB
      Processor Interconnect Speed: 4.8 GT/s
      Boot ROM Version: MBP61.0057.B0C
      SMC Version (system): 1.58f15

    Actually it is not-so-permitted to remove sophos for this machine, but I did it anyhow. No problem so far, but lack of evidence is not evidence of being lack of something so I am not adding it to the list yet

  • Update a table based on Min value of a column of a Another Table.Pls Help.

    Dear All,
    Wishes,
    Actually I need update statement some thing like below scenario...
    Data in table is like below:
    I wrote a query to fetch data like below ( actually scenario is each control number can have single or multiple PO under it ) (i used rank by to find parent to tree like show of data)
    Table: T20
    Control_no        P_no  Col3
    19950021     726473     00
    19950036      731016     00
    19950072     731990     00
                     731990 01
    19950353     734732     00
                     734732 01
    19950406     736189     00
                 736588     01
                 736588     02
                 736588     03                
    Table : T30
    Control_no      P_no              col3
    19950021     726473 
    19950036     731016
    19950072     731990     
                 731990     
    19950353     734732     
                  734732     
    19950406     736189     
                  736588     
                  736588     
                   736588     
      Now requirement is I need to update Table T30's col3 (which do have values in T20 but not this table) in such a way that , It should take MIN (COL3) from T20 and then update that value to related Col3)
    Better I can explain through below new data format in T30 after update:
    After update it should like:
    Table : T30
    Control_no       P_no    col3 (this is updated column)
    19950021     726473   00  -- as this is min value for Pno 726473 belongs to Control NO 199950021 in Table T20 above
    19950036     731016   00  -- as this is min value for Pno 726473 belongs to Control NO 199950021 in Table T20 above
    19950072     731990   00  -- see here..both Pno should updated as '00' as MIN value col3 in Table T20 related to this
                 731990      00     record is '00'  (out of 00,01 it should select 00 and update that value here)
    19950353     734732      00  -- same again both Pno should updated as '00' as MIN value col3 in TableT20 related to this
                 734732      00     record is '00'  (out of 00,01 it should select 00 and update that value here)
    19950406     736189      00  -- As there is single col3 value in T20, 00 should be updated here.
                 736588      01  --  Here it should update col3 as '01' since for this pno(736588)
                 736588      01  --  Here too it should update col3 as 01 per requirement ,minimum value of this pno in T20
                 736588      01  --     same here too.. Sorry if my post formatting is not good...
    Hope i am clear in my requirement..(update T30 col3 based on min value of col3 of related records)
    Please suggest some update sql for this...(ideas would be great)
    I am using oracle 10 g version soon will be migrated to 11g..
    Regards
    Prasanth
    Edited by: Onenessboy on Oct 20, 2010 12:13 PM
    Edited by: Onenessboy on Oct 20, 2010 12:15 PM

    Onenessboy wrote:
    I am really sorry, my post so nonsense in look..
    I used to use for actuall code..
    the out put i tryped, i used [pre] , [/pre] but still does not look good..
    hmm..thanks for your suggestion hoek..
    so any ideas about my requirement...I would suggest spending a bit more time trying hoek's suggestion regarding {noformat}{noformat} tags instead of repeatedly asking for more help.
    Because to understand your requirement, people are going to have to read it first.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Why can I no longer use AirPlay with my Slingbox?  New updates break complatibility?

    Why can I no longer use AirPlay with my Slingbox?  New updates break complatibility?

    You already seem to know what the issue is, it is the parallax feature that was added to iOS 7.  From your rant, it appears that your attempt to work around this was not successful.  According to the Apple documents I've seen, they recommend that you enlarge your image (not reduce it).  Make your image have excess space on all sides, which is not displayed on the screen.  This way, when you tilt your device one direction or another, it can shift the image to give the appearance of 3D. 
    As a photographer, I like to use the full frame of my images, but I also know that I need to leave room around the image as well.  I have some photos I have taken that I can't use because I have them cropped too tightly too, but I have others that work just fine.  Just remember that part of the image file is "off screen" so that if iOS has to shift the image up it has some image that can scroll onto the screen.  It needs this space on all sdes, so just make youre images larger, and keep in mind that a portion on each side will be outside the normally visible screen...  If you don't like this feature, you can always go into the settigns and turn it off.

  • Mac OSX 10.4.8 Update Breaks Raid Striping -- System will no longer boot

    Hi,
    I'm a newbie from the PC world with a Mac Pro. For the last 8 hours I've been trying to get a Raid-0 configuration to work with no success.
    The Raid array constructs ok and the system boots. Once that's done the Software Update screen arrives and I would select install all... then the machine would not boot. I get a Grey Shade like affect and the message to power off and restart. Powering off does nothing.
    So I started again for the Nth time and added each Software Update individually. All loaded and rebooted successfully until the 10.4.8 Update.
    As soon as that loads, installs and restarts the machine will not boot.
    I called Apple's Tech Support and they told me they do NOT support RAID on this machine. I said what are you talking about. They put me on hold talked to a supervisor and came back with the same story. I just don't get it...
    So anyone have any insight and advice on why the update breaks my Raid-0? What can I do to get over the problem (I'd like to have the RAID...)?
    Thanks for the assistance.
    Mac Pro   Mac OS X (10.4.8)  

    Yes, you needed an emergency boot drive anyway to repair your RAID boot drive. Just use the same one in addition to a working clone or backup of your regular system.
    Apple made it easy to install or update security updates and system updates from an alternate drive (but you will have to use the stand-alone (combo preferably) updaters instead - which many use already as normal part of upgrades for years now (they seem more useful and reliable).
    My preference is a dedicated boot drive with OS and apps and minimal home directory - no media files - and fast, like 10K Raptor. I use RAID for my home directory so it isn't on the boot drive for years to improve performance and keep the OS separate. Never a problem and nice mix.

  • How to find groups in domain based on input file of groups

    Hi,
    I want to find if groups exist in the domain based on a list of groups in a text file as follows.  My Get-AdGroup doesn't work, so Im looking for suggestions.
    $MyGroups = Get-Content -path c:\MyGroups.txt
    Foreach ($Group in $MyGroups)
                Get-Adgroup -filter 'Name -like "$Group"' -SearchBase "DC=MyDomain,DC=Com" -SearchScope SubTree
    Thanks in advance.
    Thanks for your help! SdeDot

    One additional suggestion - you need wildcards too, if you really want to use -like:
    Get-ADGroup -Filter "Name -like '*$group*'"
    Don't retire TechNet! -
    (Don't give up yet - 12,950+ strong and growing)

  • How to update one table based on another table ??

    Hello Friends:
    I am trying to run the following query in oracle but it won't run.
    UPDATE BOYS
    SET
    BOYS.AGE = GIRLS.AGE
    FROM GIRLS
    WHERE
    BOYS.FIRSTNAME = GIRLS.FIRSTNAME AND
    BOYS.LASTNAME = GIRLS.LASTNAME;
    This query runs fine in sql server but in oracle its saying can't find "SET". PLease tell me what is the correct syntax in oracle to update one table based on another table.
    thanks

    See if this helps.
    If you wrote an SQL statement:
    update boys set age = 10;
    Every row in the boys table will get updated with an age of 10. But if you wrote:
    update boys set age = 10
    where firstname = 'Joe';
    Then only the rows where the firstname is Joe would be updated with an age of 10.
    Now replace the 10 in the above statements with (select g.age from girls g where g.firstname = b.firstname and g.lastname = b.lastname) and replace where firstname = 'Joe' in the second statement with where exists (select null from girls g where g.firstname = b.firstname and g.lastname = b.lastname). The same concepts apply whether 10 is an actual value or a query and whether you have a where clause with the update statement to limit rows being updated.
    About the select null question regarding the outer where clause:
    Since the query is checking to see if the row in the girls table exists in the boys table what the column is in this select statement doesn't matter, this column isn't being used anywhere. In this case Todd chose to use null. He could have also used a column name from the table or a lot of times you'll see the literal value 1 used here.

  • Cluster Network name resource could not be updated in domain

    Hi,
    I have the following error and need clarification on the below solution in bold:
    Event Id 1206 -
    The computer object associated with the cluster network name resource 'Cluster Name' could not be updated in domain 'xxxxx.xxxx'. The error code was 'Password change'. The cluster identity 'ClusterGroup1$' may lack permissions required to update the object.
    1 - Move CNO back to the Computers Container
    2- Give the Cluster Node Computer Accounts Change Password permission on the CNO
    3 - Take the Cluster Name Resource offline
    4 - Repair Cluster Name Resource
    5 - Bring Cluster Name Resource back online
    Firstly, is there any implication?
    Secondly if ClusterGroup1$ is my CNO (Cluster Name Object) then is my
    cluster node computer account the server nodes in the cluster? E.g. ClusterGroup1$ is the cluster, the nodes are hyperv01 and hyperv02, do I add hyperv01 and hyperv02 to clustergroup1 -- properties -- security?
    Thank you.

    Hi SPD IT,
    If you have pre-stage your cluster object to a specific OU, you needn’t move them to default computer OU, with your current error information it most possible caused by the
    lack permission of cluster nodes or some unless GPO applied to cluster nodes, please exclude the cluster from any GPO, then test this issue.
    If it does not work please follow this repair action then monitor this issue:
    1. Open Failover Cluster manager
    2. Select Clustername
    3. Under Cluster Core Resources right click on Cluster Name and select Take offline
    4. Right click on Cluster Name and select repair.
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • UpdateXML : How to update EmployeeName tag based on EmployeeID value

    Hi All,
    My XMLType (EMP_DOCUMENT) field in a table stores the following simple XML structure:
    <DEPARTMENT>
         <DEPARTMENT_ID>1</DEPARTMENT_ID>
         <DEPARTMENT_NAME>Finance</DEPARTMENT_NAME>
         <EMPLOYEE>
              <EMPLOYEE_ID>1</EMPLOYEE_ID>
              <FIRST_NAME>ABC</FIRST_NAME>
              <EMAIL>ABC</EMAIL>
    </EMPLOYEE>
         <EMPLOYEE>
              <EMPLOYEE_ID>2</EMPLOYEE_ID>
              <FIRST_NAME>xyz</FIRST_NAME>
              <EMAIL>xyz</EMAIL>
    </EMPLOYEE>
         <EMPLOYEE>
              <EMPLOYEE_ID>3</EMPLOYEE_ID>
              <FIRST_NAME>zzzz</FIRST_NAME>
              <EMAIL>zzz</EMAIL>
    </EMPLOYEE>
         <EMPLOYEE>
              <EMPLOYEE_ID>4</EMPLOYEE_ID>
              <FIRST_NAME>yyyy</FIRST_NAME>
              <EMAIL>yyyy</EMAIL>
    </EMPLOYEE>
    </DEPARTMENT>
    Employee_ID is unique and Employee_Name is not unique.
    I have a requirement to update the Employee_Name tag where i have the Employee_ID and the value to be updated.I tried the following but it updates all Employee_Names instead of updating the record i want:
    UPDATE EMPLOYEE_DOCUMENTS p
    SET p.EMP_DOCUMENT = updateXML(p.EMP_DOCUMENT,
                   '/DEPARTMENT/EMPLOYEE/FIRST_NAME/text()',
              'Scott')
    WHERE DOCUMENT_ID = 1
    AND existsNode(p.EMP_DOCUMENT,'/DEPARTMENT/EMPLOYEE[EMPLOYEE_ID = 2')=1
    I can see that updateXML essentially acts as 'ReplaceXML' where one tag can be searched and replaced with the new value.But is it possible to UPDATE a tag based on other tag at the same level (like update the employee_name based on employee_id)
    Thanks,
    Srihari
    Edited by: srihari manian on Jul 15, 2009 7:19 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    I believe this is what you are looking for
    WITH employee_documents AS
    (SELECT XMLTYPE('<DEPARTMENT>
    <DEPARTMENT_ID>1</DEPARTMENT_ID>
    <DEPARTMENT_NAME>Finance</DEPARTMENT_NAME>
    <EMPLOYEE>
    <EMPLOYEE_ID>1</EMPLOYEE_ID>
    <FIRST_NAME>ABC</FIRST_NAME>
    <EMAIL>ABC</EMAIL>
    </EMPLOYEE>
    <EMPLOYEE>
    <EMPLOYEE_ID>2</EMPLOYEE_ID>
    <FIRST_NAME>xyz</FIRST_NAME>
    <EMAIL>xyz</EMAIL>
    </EMPLOYEE>
    <EMPLOYEE>
    <EMPLOYEE_ID>3</EMPLOYEE_ID>
    <FIRST_NAME>zzzz</FIRST_NAME>
    <EMAIL>zzz</EMAIL>
    </EMPLOYEE>
    <EMPLOYEE>
    <EMPLOYEE_ID>4</EMPLOYEE_ID>
    <FIRST_NAME>yyyy</FIRST_NAME>
    <EMAIL>yyyy</EMAIL>
    </EMPLOYEE>
    </DEPARTMENT>') emp_document
      FROM DUAL
    SELECT updateXML(p.EMP_DOCUMENT,
    '/DEPARTMENT/EMPLOYEE[EMPLOYEE_ID = 2]/FIRST_NAME/text()',
    'Scott')
      FROM employee_documents pwhich just updates the name for employee id 2.

  • The latest Java update breaks some vital applications

    The latest Java update breaks some vital applications. I have reverted back to 7u45. But now, every time a java applet is used, the "later", "block", "update" window appears and stops the applet from loading. I must have this older release. Oracle does not throughly test their updates. Note: the apps the update breaks are actually Oracle apps.
    I have checked the "do not ask again until next relesse" box every single time. Worthless.
    Is there a way to stop Java version checks? I even have the box deselected for check for updates; ignored by OS X. I WANT CONTROL! Stop checking!
    Ideas?

    We are facing the same issue. We suggested all out customers not to install the updates Java 7u65 or 8u11 until there is a workaround or fix.
    The wrong look & feel is causing the following problems:
    - Either icons or text can be display on a button. Currently the majority of buttons are displaying an icon. Therefore the workaround is to set the text at least.
    - Scroll-bars are displayed within all cells of a table column. The circumstances are not clear when these scroll-bars are displayed.

Maybe you are looking for