Ms6131- cant get PCI ata133 card to load bios

I have ms6131,v:1.0 , I wish to install my fast ata pci update card for
133 udma ops. but the manual says for card, set bios to scan SCSI first , but there is no SCSI order in MS BIOS Award ver.v.1.5
anyone know how to get this SII0680 raid (not using raidpart) to at least boot its own bios at startup. Test card on another system and it worked ok.
This is a BIOS option issue. read manual , bios , forum, FAQ, Usenet.
seems I am the only person messing with fast trak ata 133 drives and
interface boards. this sys.
Thanks for the help. jerry
[email protected]

The "only boot orders" in the bios settings (AWARD 1.6) are
boot device order.
like C,CDROM,A or others
tried SCSI, Something something,
I have repaired thousands of PC in my 25 years ( old guy who built
Northstar Z80 CPM systems. )
I have never seen a bios that would not scan for the upper
bank of extended BIOS pluggin's.
The C, D and E0000 bank is scanned on all IBM PC systems.
This concept was invented for the PC-JR ,by IBM.
Msi documentations is devoid of any help on ADD in cards ,even
though, it has this cute little useLESS RISER CARD.
The Classic , BOOT start order "SCSI/IDE" is pattently missing.
I tried plugging in every add in card I own into all slots that
have a bios extention code Eprom. mostly my many scsi cards.
NO sign message is displayed , showing the SCAN engine is dead
or DELETED by MSI on this box.
No answer from their email. No surprise there.
If they do answer , I will post it to USEnet so others can save the hassle of No support and No documentation ( Advanced Configuration). If I get info , it will go here and usenet.
The thing I keep going back to is Bios never mentions the RISER card.
I even tried all permutations of turning off all IDE devices and ports
and looking for boot messages from ADAPTEC, to no avial.
What I am doing:
I use these little boxs for micro servers. They run cool and use little
power for 24/7 ops. I use Linux on them.
My best unit is Dell GX-150 SFF , ver nice unit but needs smaller
PCI cards, but at least the Dell functions properly.
Anyone having a clue to this riddle , thanks 1 million times.
I suspect that there my be a very well hidden setting , I am missing.

Similar Messages

Upper Limit On HDD Capacity For QS G4 2001 Model W/PCI ATA133 Card?

Hey Everyone,
I currently have a Tempo ATA133 PCI card installed in my QuickSilver G4 2001 system (http://www.sonnettech.com/product/tempo_ata133.html). To address capacity issues, I'm considering adding a very large 500 GB, 7200 RPM ATA133 Hitatchi HDD (http://www.newegg.com/Product/Product.asp?Item=N82E16822147008), which would connect to this PCI card.
Does anyone have reason to believe this configuration would cause issues, or if there's an upper limit on the amount of HDD space a PCI ATA133 card can support?
My feelings are that this configuration will be fine, but I'd like feedback before I proceed.

Good information bhgdfh! I'll have to reinstall OS 9 it seems to load the firmware, which is fine. If I end up buying the drive, I'll post the results! Meantime, I'm keeping the question unanswered in case anyone else has additional input.

I cant get my gift card to work

i cant get my gift card to work

Try the iTunes Cards and Codes topic of:
Apple - Support - iTunes

Can't get PCI VXI card to initialize on CentOS 5 (Fedora Core 5)

I am trying to configure a pci-vxi card on our new machine. We have an Intel MB (DG965WH) and the Q6600 Core2 Quad processor. The OS is CentOS 5 (Fedora Core 5) with kernel 2.6.18-53.1.4.el5.
I have read all the other posts concerning Fedora Core 5 and have modified the source code to fix the compile errors in the driver. The following lists the output I am getting:
when running make:
make -C /lib/modules/2.6.18-53.1.4.el5/build SUBDIRS=/usr/local/nivxi/src KBUILD_VERBOSE=0 modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-53.1.4.el5-i686'
CC [M] /usr/local/nivxi/src/vxi.o
CC [M] /usr/local/nivxi/src/vxi_kernel.o
CC [M] /usr/local/nivxi/src/pci_io.o
CC [M] /usr/local/nivxi/src/mutex.o
CC [M] /usr/local/nivxi/src/vxiTimer.o
LD [M] /usr/local/nivxi/src/vximod.o
Building modules, stage 2.
MODPOST
WARNING: could not find /usr/local/nivxi/src/.nivxi.o.cmd for /usr/local/nivxi/src/nivxi.o
CC /usr/local/nivxi/src/vximod.mod.o
LD [M] /usr/local/nivxi/src/vximod.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.18-53.1.4.el5-i686'
Kernel module built successfully and placed in ../sys/
Use /usr/local/nivxi/src/../sys/load_vxi to load it.
When running load_vxi:
NI-VXI device driver located in "/usr/local/nivxi/sys"
When running vxiinit:
Unable to initialize hardware
dmesg output:
VXI: initialized
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[drm] Initialized i915 1.8.0 20060929 on minor 0
VXI: unloaded
VXI: initialized
From /var/log/messages:
Dec 21 09:55:02 lion kernel: VXI: unloaded
Dec 21 09:55:07 lion kernel: VXI: initialized
No matter what I do I cannot get vxiinit to initialize the device. The device itself is listed
in the /dev directory as vxi0 where "0" is the number zero. On another machine we have
running CentOS 4.5 the device is listed as vxiO. where "O" is the capital letter O. The
device works fine on this machine.
I am not sure what I should try next. Any suggestions would be greatly appreciated.
Thanks,
Greg

Howdy Greg,
I've been researching your issue extensively over the past day and unfortunately
found your Fedora distribution has not been officially tested and verified for
functionality (assuming you're using a MXI 2, check out the VIX for Linux page). That
being said, I was able to find some other Discussion Forum posts dealing with
hacking VXI to work on Fedora. I know you said you read up on this, but I
wanted to post them anyways just in case.
VXI
Drivers on Fedora Core 5
- This is quite a long post dealing with similar errors to
what you are seeing
NI-VXI for Linux Hangs on SMP/Hyperthreaded Machines with APIC
Enabled
- A KnowledgeBase article linked in the previous thread
Fedora
Core 5 - kernel 2.6.20 -NIKAL 1.5 How To
- This one is kind of a long shot since it's for our MultifunctionDAQ drivers
and not VXI, but check it out anyways to see if it gives you any ideas.
Let me know how these worked for you and if you have any
follow up questions. Good luck.
Sincerely,
Chris G in AE
Sincerely,
Chris G in AE

TS4022 cant get icloud control panel to load correctly to use outlook 2013

i cant get control panel to load correctly to allow me to set up sync functions to my outlook 2013 on my pc

Solved. Uninstall iCloud Control Panel from Windows 8 machine (use Control Panel). Restart, reinstall iControl 2.0.

So mad i cant get my credit card off my itunes so i can add a itunes card i have tried everything no one will help

help me please ! I have tried everything to get my credit card off the itunes no one will help

Just so you know, you can redeem iTunes cards without having to remove your credit card. If you want to remove the card, though, try redeeming the iTunes card and then go into your account information and see if the "none" option then appears in the Payment Method section. If not, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

TS3297 Cant get my credit card to go through keeps saying contact iTunes support

I can not use iTunes or App Store it says need to add credit card i have added my credit card and it won't take it so now i cant download anything i know my credit card is good and i use to have the same card on it

Ridincurly wrote:
I have tried to contact iTunes support and still no luck because there is no live person to talk to
Live people answer the e-mail and express lane.
Click Support at the top of the page, then click the link under contact us.
There is NO PHONE SUPPORT.

I cant get my Wlan card PC11B2 to work on Windows xp 64 bit

I Try to install my Wlan PC11B2 card on Windows 64bit, but cant make it work :(
I have a MSI K8N Neo mainboard and a 3000+ AMD, can anybody please help me.....

bighead2192 wrote:
I just got a linksys wrt160n v2 and ive been trying to connect it with my ps3 but when i do the connection test it says that their is a dns error and ive typed in a million different things and nothing seems to work. i've done that whole thing where you go to run then type in cmd and then type ipconfig/all and ive taken all that info and set it in put nothing seems to work. and it also says that my UPnP is not available. I really need someones help. i have a windows xp and my internet provider is comcast. any help would be greatly appreciated!!!
Hi bighead2192,
Call your Router's Manufacturer's Phone Support and have them walk you through setting up your Router.
However, you should have the Router's Manual in PDF format or Paper that you can read and find out how to do it.
I have a D-Link Router, not a Linksys Router.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Can't get PCI 6024E card recognized by LabView

Window's Device Manager sees the card as an unknown PCI. I have tried removing the card, rebooting, and then replacing the card. I can't find any driver (.inf) files for the 6024. Is NI-DAQ the driver? NI-DAQ will just not see the card at all (even when I hit F5) My system information is below:
National Instruments Technical Support Form (Version 2.1.3.14)
Generated: Tuesday, July 19, 2005 11:29 AM Eastern Daylight Time
User Information:
Registered Owner: C. J. Martoff
Registered Organization:
Address:
City:
State:
Country:
Postal Code:
Phone:
Fax:
Email:
System Information:
Operating System(OS): Microsoft Windows 2000
OS Version: 5.0.2195
OS Info: Service Pack 4
Processor: Pentium
Number of Processors: 1
Physical Memory: 1,047,856 KB RAM
Drive C:\ 377,342 of 3,413,781 KB free
Drive D:\ 2,124,316 of 2,870,012 KB free
Drive F:\ 192,982,900 of 199,141,708 KB free
NI Software Information:
CVI Run-Time 5.10.4.0
ComponentWorks
     3D Graphs Controls 1.0.430
     DataSocket Controls 2.1.445
     IMAQ Controls 1.0
     User Interface Components 3.0.1.549
IVI Engine 1.1
LabVIEW Run-Time 5.1
LabVIEW 5.1,FDS,English
Measurement & Automation Explorer 2.1.3.14
NI Spy Version 1.2
NI-488.2 Software Version 1.30
NI-DAQ Version 6.9.1f28
NI-IMAQ Software ˆ
NI-PAL Software Version 1.4.5f0
NI-VISA 2.01
     NiViSv32.dll 2.0.0 (Build 16)
     visa32.dll 2.0.0 (Build 16)

Hey MPM,
Since Windows recognized the board as a PCI device, it sounds like a
general driver error. The NI-DAQ driver would be needed to
communicate with Measurement and Automation Explorer (MAX) and
LabVIEW. For LabVIEW 5.1 the current available version is NI-DAQ
6.9.3. I would recommend doing the following.
1. Uninstall the current version of the drivers.
2. Shut down the computer and remove the PCI-6024E.
3. Reboot the computer, download and install NI-DAQ 6.9.3, which is available at ni.com/downloads.
4. Shut down the computer and resintall the PCI-6024E.
Once you reboot, you may be prompted with the found hardware
wizard. Once it is completed, the board should be available in
MAX and LabVIEW.
Andy F.
Applications Engineer
National Instruments
National Instruments

My old PC died. I authorized my new PC. All the cloud music is now on it and plays. Tried to sync with my IPOD CLASSIC. Asked me if I want to erasesons I said yes. Now I cant get my new pc to load songs to my IPOD or burn a CD.

My old PC died, I got a new windows 7 pc. I authorized new pc, The cloud music plays. Connect IPOD CLASSIC, asked me to erase or load I hit erase. Now I cant sync any songs to my IPOD nor can I burn a CD from a play list. Help I have no clue how to load my library to my IPOD.

What happens when you try to sync your iPod Classic with your iTunes library? Any error messages? If so, what is the exact wording of these error messages?
Does the iPod appear under Devices in the left hand pane of iTunes?
B-rock

I cant get my vid card out!

I was tryin to get my gf4 out of my comp that isnt running correctly, and replace it with my gf2. but i cannot get it out! the part at the very end that the little white plastic piece clips onto will not unlatch. ive tried using my finger to unlatch but i actually got the whole card out of the socket except for that piece. is there a special way to get it out? looked through the manual and couldnt find anything.
btw, i have a MSI K7N2-L

if ya got a pair of needle nose pliers or dikes try to gently push the tab away from your card if not then use a flat head screw driver too pry it away just be careful if ya slip you could fry your board or vidcard then rma the board cause these clips are made way too good too have fallin off on its own

Cant get my gift card to work

hi i bought a 15 dollor i tunes gift card from petro canada in stewiacke and i put it on my iphone and it said that it wasent probly activated and to contact you guys

Try the iTunes Cards and Codes topic of:
Apple - Support - iTunes

Cant get adobe flash player to load

hi i am t
rying to get adobe flash player to install but when i click on the install button it just keeps
going to the same page for me to click on the install button it wont
even start to install please is there anyone that can help me

Funny, I am running version 10.3 of flash with no problems.. Check out my youtube video:
http://www.youtube.com/watch?v=01poGmUj3xI
And those who say it can't be done, I challenge them to say otherwise..
Please see this thread for more info.
https://discussions.apple.com/message/15201301#15201301
Message was edited by: romko23

Cant get graphics card to work on MS6166 board

Iam tring to install nvidia graphics card(PCI) to my MS6166 mother board but cant get new drivers to work,I have disabled on board graphics via jumper on board but new graphics card still wont work.
HELP!
Anybody had same problem?

Well, have you tried leaving the monitor cable connected to the onboard VGA and tried booting up? Sometimes you need to disable it within BIOS.

Startup gets 'Network cable unplugged' on mini-PCI wireless card

I recently installed a Netgear DG834GT wireless router and now have an intermittent problem connecting my Tecra 9100 to it. If the 9100 has been shutdown for a while (like overnight), when I restart I always get 'Network cable unplugged' for the wireless connection. Rebooting a number of times (anything from 3 upwards) I eventually get connected to the router and all then works fine for hours. Even a quick restart at this point (i.e. once the wireless card has connected) does not cause a problem but as soon as I leave the machine shutdown for a length of time it fails again at reboot.
There are no errors in the Event log.
I am using the built in mini-PCI wireless card and have already upgraded to the latest driver.
Any ideas gratefully recieved, at the moment each morning is a 20-30 minute frustration of rebooting trying to get my connection working.
(Running Win2K Professional)

Checking other boards for help (Netgear etc.) it seems that the 'Network cable unplugged' is a common message when wireless connectivity is failing. However, to prove the point, I have disabled the other LAN card (for which I was also getting 'network cable unplugged' but as expected since it was). I still get the same issue with the wireless card, although now the reboots are slightly more predictable - it normally seems to succeed on the third reboot. I guess disabling the other card has changed the startup timing slightly and in that way made things slightly better.
Again, any other suggestions gratefully received. As this seems to be a timing issue at startup, I am suspicious that one of the other things that runs at that time is causing the problem.

Ms6131- cant get PCI ata133 card to load bios

Similar Messages

Maybe you are looking for