MS6712 - how to set wake on external modem

Hi,
I'd like to wake my PC by external modem, how I should set my MS 6712? Can you help please? I tried everything, but when the ring come, PC doesn't boot (AA LED on modem is indicatating incoming call).
Boco

Have you tried the stand by, instead of hibernate? When I select hibernate, I have to push the power button to wake the computer. Hibernate writes what is in memory to disk, and shuts down the system, standby simply powers down to minimum, waiting for a wakeup event.

Similar Messages

How to Set up an External Monitor on u310

i use the hdmi adaptor to connect to a tv with a pc port
even if i set the display in double mode ( my laptop plus ext monitor ) as soon as i insert the hdmi plug , with no connection to the ext monitor , the screen comes out black
how to set my pc to avoid it ?
thanks
pietro

Dear pgerratico
Welcome to Lenovo forums
could you please try to connect the HDMI while the machine is off and start it and see will it be displaying on the external monitor or not and the computer screen aswell
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Does anyone know how to connect with an external modem and AOL service?

i just got the macbook yesterday and the modem came today, and i cannot figure out how to connect with an AOL account using the external modem. does anyone know how, or have the same problem??
Macbook 1.83Ghz White Mac OS X (10.4.7)

Hi MacMan2006! And Welcome To Discussions!
Do you have the AOL software installed?
When you open System Preferences > Network > Location: Automatic & at Show: is there an option to select External Modem?
If so, is your Modem Model listed?
ali b

How to set levels for external swf's??? loading code added!

hi,
im using flash cs5, as2.
i have a main index fla that loads into it 5 swf's.
i need these 5 to be loaded into a lower level than the main index fla (index has to be the highest level)
how can this be acheived?
i have no idea on how or where to code this.
my code for loading the movies is:
F1
var IndexLoaded = _root.getBytesLoaded();
var total = _root.getBytesTotal();
var percent = int(IndexLoaded/total*100);
var loadingName = "Loading.. " + percent + "%" + " of " + "Index";
var checkFrameplay = 0;
Bar_anime.gotoAndStop(percent);
Loadtext_txt.text = loadingName;
if (IndexLoaded == total) {
                var n = 0;
                gotoAndPlay(3);
F2
gotoAndPlay(1);
F3
var movie:MovieClip = _root.StoredActions.Con.createEmptyMovieClip("movie"+n,n +1);
loadMovie(n+".swf",_root.StoredActions.Con["movie"+n]);
var MovieLoaded = 0;
percent = 0;
_root.StoredActions.Con["movie"+n]._x = 3000;
F4
MovieLoaded = _root.StoredActions.Con["movie"+n].getBytesLoaded();
loadTotal = _root.StoredActions.Con["movie"+n].getBytesTotal();
percent = int(MovieLoaded/loadTotal*100);
Bar_anime.gotoAndStop(percent);
loadingName = ("Loading.. " + percent+ "%" + " of "+ n);
Loadtext_txt.text = loadingName;
if (loadTotal>10) {
                if (MovieLoaded>=loadTotal) {
                                gotoAndPlay(6);
F5
gotoAndPlay(4);
F6
if (n < _root.nMenus) {
                n++;
                gotoAndPlay(3);
} else {
                gotoAndStop("Stopload");
                _root.gotoAndPlay("Playmovie");
F7
stop();
thanks in advance for any help.
sajjy

hi,
i understand what you are saying about the code, im no advance user of as2 but i can say from all the research i have done, iv not seen anyone using this sort of code, its all over the place.
but on the other hand, even though its a mess, its working and all the site functions and buttons work well with the code.
basically the main.swf is the structure of the site, it has all the images/frames in the right places. the other swfs load into a little window on the main.swf. this window has some shading/reflections on it and the problem i have is when i scroll the movieclips, they scroll over the shading/reflections making it look tacky, if i didnt use any scrolling it would be fine but i need to use it due to having a small window.
the content of the window is controlled by a button thats on the main.swf.
each of the loaded swfs have dynamic text, movieclips, buttons to open external html windows. nothing advance to be honest, all the interactive movieclips are controlled by clicking on them, navigating to another frame (using labels).
i would upload the files for you to have a look but im under strict ruling that i cant share the content as its not yet been released to the public.
i hope that helps clear a few things up for you. if i cant get the levels to work then i guess it will have to stay like that or i will have to scrap the whole project and start again.

How to set up an external Hard Drive as a cloud folder for remote users?

I have an external HD connected to my MacBook Air that I need two other people in my company to be able to access from far away cities. I'd like to know if there is a way of them having a folder in finder that goes straight to this external, similar to what shows up when Box.net or DropBox is installed. I don't want to use FTP, as one of them is not very savvy and using an FTP client would be an extra pain.
Is there a way of doing this?

Then you should probably looking into a simple turnkey solution like the WD MyCloud or similar.
http://www.wdc.com/en/products/products.aspx?id=1140

How to set shortcuts for external keyboard for MacBook Pro?

I attached a wired external keyboard (Apple aluminum) to my MacBook Pro. Several of the function keys are preprogrammed, and several are open. I want to program one of the open function keys to emulate the F11 key on the internal keyboard, the one that moves all open windows out of the way to show the desktop. The keyboard shortcuts tab in System Preferences only controls the internal keyboard.
Does anyone know a way to do this?

Bump. Searching for a solution to the same problem.

How to set up a FTP and web server and integrate with DMM 5.2

Hi All ...
I need to set up a external server only for content publishing to reduce the overhead of the DMM server .
can anyone guide me on how to set up the external server and intergrate it with the DMM 5.2
Thanks

semuthu,
Notes from the Release Notes:
Compatibility Limitations with Microsoft Internet Information Server (IIS)
DMPs that use firmware release 5.2 are compatible with only one version of Microsoft Internet Information Server.
That supported version is IIS 6.0 for Windows 2003 Enterprise. If you do not have the supported IIS version but
want your DMPs to retrieve assets from a webserver, we recommend that you use Apache instead of IIS.
I would suggest using Apache instead of IIS for the webserver service. IIS can be used as FTP if needed.
There are plenty of Documents on the Web about setting up Apache and FTP for servers.
Using Apache with Microsoft Windows
http://httpd.apache.org/docs/2.0/platform/windows.html
Quick HOWTO : Ch20 : The Apache Web Server
http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch20_:_The_Apache_Web_Server
Once the Webserver is setup and operational. You simply store your media content on the Webserver
and then have your DMS assets in the media library use an external URL address for its location.
If you want to use external server for other features in the DMM, you can can see how to configure
here:
http://www.cisco.com/en/US/partner/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/dsm+etv.html#wp1073210
Goto the section right below ACNS & WAAS..
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

How to set up and auto-mirror a networked drive?

So here's the situation. I currently have a MBP Retina 15 (max spec'd), and there are some design processes that still run a little slow for my liking. Given that I spend about half my working life at a desk plugged into a monitor anyway, I figured I'd get a Mac Pro to use when I'm in the office.
What I need help with is how to:
-Set up an external networked drive so that I can open and save all my projects to the same place regardless of which machine I'm working on. I spend 90% of my laptop working time at home on the same network.
-Have the networked drive auto-back up to another external storage device so that in case of HD failure. Basically I want to save a file, and have it expeditiously (ideally instantly, but the sooner the better) back up to the secondary HD.
Somebody at the Apple Store suggested using a USB HD plugged into Airport Extreme, and that would work, I suppose, but
1) I'd really prefer something plugged in to the Mac Pro to speed up the data transfer at least one one machine.
2) There's only 1 USB port on the Airport Extreme. So if we were to go this way, the back up mechanism would need to be built in to the drive -- some sort of double external HD that auto-mirrors.
Any suggestions?

Could you use textarea?
sym.$('inputfiled').html('<textarea cols="20" rows="3"></textarea>);
actually the form I used in the file is:
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});

Configure External Modem in Solaris 10

Friends, I am new to this OS.Plz help me that how i can configure my external modem in this OS.
Thanks

Some links:
http://docs.sun.com/app/docs/doc/817-0403/6mg741bst?a=view
http://docs.sun.com/app/docs/doc/817-0403/6mg741bt2?a=view
If you are going to use PPP, also check out this one:
http://docs.sun.com/app/docs/doc/816-4555/6maoquih3?a=view

How to set up my display to be the main view HELP

How to set up my external display automatically work as the main display when plugged into my MacBook Pro. I had it set up to work this way on my old MBP but I got a new MBP with Mountian Lion and the Display set up seen different and I can figure out how to make my Apple HD display (about 3 years old) be the main display when I turn on my MBP. Mirror is off when I look at
System pref’s – Display – Arrangement I just get to pick which display is left and right. I cant remember how it was set up on my old MBP. Mirroring does me no good. Any help will do!!!
Thanks Brad

In System Preferences > Displays > Arrangement tab. Drag the little grey rectangular "menubar" to the other monitor.

How to set up TimeCapsule (4th) to create own private (wired) network behind Airport Express (5th) that is set up to join existing wifi-network of fritz adsl modem/router?

I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?

Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How do I set up my external drive to just back up certain apps?

I am runnning Yosemite and wanted to know, how can I set up my external hard drive just to store certain apps i.e music and pictures?

If you're using Time Machine to backup you should probably take a look at the late, great Pondini's FAQ http://pondini.org/TM/FAQ.html

How to set up external hard drive and FCE 4

I am going to buy an external hard drive (firewire 400) and FCE4 but I am not sure how to set everything up.
Where should I load the software, capture to, and save projects?

FCE should always live on your system drive. Use the external as your Scratch Disk. You will select this in System Settings in FCE. I create a folder on the external for my projects and point FCE to it.
Keep your project files on your system drive as well as your autsave vault if you use that. You can put your other files, such as wavefrom caches on the external, though I leave them on my system drive.
Do not partition the drive. Format as OS Extended

How to set an external ringtone on a contact?

how to set an external ringtone on a contact?
it seems that is possible to select only system ringtones.

I found one app, custom ringtone.
http://www.1mobile.com/redirect/com.wuxiastudio.customringtone
I have tried it, it really works.
A past Nokia X user, now a X user.

MS6712 - how to set wake on external modem

Similar Messages

Maybe you are looking for