MS6712 Video and LAN problems with Windows 98SE

Can anyone help please with a problem that’s been baffling me for weeks.I
The computer in question is a TIME Powerstation with AMD 2600+ processor with 1024MB RAM, Nvidia Geforce FX5200 and Windows XP Home.
Have set this computer to Dual Boot to Windows 98SE (Using Acronis OS Selector software).
My problem is that after many attempts, have so far been unable to successfully load drivers for the Nvidia GeForce FX5200 graphics card or to get the LAN function to work in Windows 98.
For the graphics card have tried a number of the more recent Nvidia Detonator Win98 drivers, all have either produced an error message (‘While initialising device IFSMGR: Windows Protection Error’) or a blank screen. Necessitating reverting back to the Standard VGA Driver with its maximum of 16 colours! The LAN function does not work at all in Windows 98SE, though it does in Windows XP – again suspect a driver problem.
The motherboard of this computer is a MSI Microstar MS6712. Have tried the ‘VIA Chipset 4 in 1 Driver’ to no avail. Are any more/different drivers required for Windows 98SE?
Would appreciate any advice in what originally was envisaged as a simple task: getting Nvidia Geforce FX 5200 graphics card and the motherboard’s built in LAN to run correctly on Windows 98.

I have your board.
1. Windows 98 won't recognize more then 512MB of RAM.
2. I had problems with the FX 5200 Ultra on this board. Occasionally when I booted the system, I would get a black screen right after the post when the OS was about to load. I've been hearing a few people lately stating problems with the KT4V-L mobo and the FX 5200 Ultra. I promptly returned the card and got a Radeon 9700 Pro instead. I have never been more happy since I made that decision. I will never put another Nvidia card in this mobo again. I also had issues with the Geforce4 MX card I had. I've come to the conclusion that Nvidia sucks.
3. Make sure your BIOS is updated to 1.9, and al lyour VIA drivers are updated. That may help you too.
That's all I can offer.

Similar Messages

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3

Pixelated video and upscaling problems with ringing artifacts on Youtube since Flash player 10.3. Flash palyer 10.2 was the last version without the listed problems.
For anyone interested you may see here what 'ringing artifacts' means : http://en.wikipedia.org/wiki/Ringing_artifact
More about Image artifacts/errors related to video scaling here : http://en.wikipedia.org/wiki/Video_scaler
Test configuration :
Windows 7 x64
Intel HD Graphics with lastest available drivers from manufacturer.
Any solution from Adobe?

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
Thanks,
Chris

Adobe After Effects CS5 Crash and compatibility problems with Windows 7 64-bit

Hello,
I get a lot of crashes of After Effects CS5. I get the message thar Monitor Kernel program stopped responding and recovered.
I also did a compatibility test and found that After Effects CS5 is not compatible with Windows 7 Premium 64-bit.
Could you suggest a solution please?
Thank you
Giannis Stravolaimos

I solved the problem by myself.... as usual

I want to use iChat video and file sharing with Windows users

Nowadays, iChat is compatible with AOL/AIM, Google Talk, Jabber, Mac.com and MobileMe instant messaging services. I know that Yahoo Messenger support will be available soon in Mac OS X Lion.
I tried using AOL/AIM and Google Talk natively in iChat in order to talk with Windows users which were using Google Talk application or web chatting (Me from: Google Talk - My friends from: Google Talk, and Me from: AOL/AIM - My friends from: Google Talk), but videoconference and file sharing were not available.
I also tried Windows Live Messenger in iChat via Jabber intermediate, but it is not efficient and doesn't work for videoconference and file sharing.
So, which IM service combination I should use to chat with Windows users in order to be able to use videoconference and file sharing using such a great app like iChat?
Thanks you.

Hi,
A lapsed Trial or lapsed Paid for MobileMe account will not work in any fashion, as a Screen Name in iChat/AIM apps or as a Email. (Of course it is no longer an Valid Apple ID either).
Given that Google is a Jabber server iChat will Video (or Audio Only) Chat Jabber to Jabber.
With a Valid AIM name (AIM, MobileMe or @mac.com) then it is supposed to work to AIM on a PC
This tends to vary from person to person as to success.
From AIM version 6.5 AIM introduced a Send as Typing feature called "Real Time"
It does not work to iChat and in fact also has to be turned Off in the Buddy List at the AIM end for Video or Audio chats to work.
The AIM app also has to be allowed through the Windows Firewall as an Exception, preferably with UPnP enabled as well and UPnP enabled in their Router.
Trillian is a paid for App for PCs that provide an alternative.
Recently theri site offered 3 windows versions
The Pro version of verion 3.2 (known to work), a version 4 and a version 5 in beta. The version 3.2 used to have a free Text chat version and only the Pro version was needed to Video.
Until the site was reorganised the 3.2 version was "On Sale" at a reduced price.
It seems version 5 is now out of beta
They are still separating out a Pro version.
It is a multi-service client
There is also a Mac version although I have not tried it.
I am not sure what you mean by "Manage" your MSN Contacts.
How about using a MobileMe expired account screen name for using iChat with Windows-Google Talk users? Should I expect the same incompatibilities?
I have already addressed part of this. The fact the name will not work full stop.
However one way of reading this is that you are thing of linking AIM and Jabber (Google) Buddies in one Buddy List
Directly in iChat this cannot be done - unless you are the one with the Jabber Account and an AIM Transport set up.
You would be subject to the same Text Chat only restrictions.
It is a bit like the fact your phone line can be used for Fax, Telephone and DSL broadband. (in fact mine does TV as well)
You granny would not be able to talk to your Fax machine if that happened to answer the call.
Her Fax machine might be able to communicate with your computer if you had an active Fax app on there, and a dail-up modem active to answer.
10:06 PM Tuesday; May 24, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Trying to install Itunes on windows 7 and having problems with windows installer

Trying to upgrade itunes 9 to 10 and updates through itunes have been unsuccessful. I have downloaded itunes 10 from Apple but when trying to install it on my computer I get the error message: " The windows installer service could not be accessed. This can occur if you are running windows in safe mode, or if the windows installer is not correctly installed. Contact your support personnel for assistance."
I also cannot uninstall itunes 9 as I get the same message.
Any ideas? I got an ipod touch for my birthday and I want to use it!!!!

Hi, I'm new here...from Malaysia. I also hav this problems last night...b4 that my iTunes working is ok...but last night i would like to connect my iPad to iTunes...there was an error Apple Application Support error2...
i had use the way teach bu b nior...but there was another erro when the installation of "AppleMobileDeviceSupport64.msi"
the error is "Service'Apple Mobile Device'(Apple Mobile Device) failed to start, Verify that you sufficient privileges to start system services."
what should i do now?

Problem with windows and my monitor in after effects

HI . before any thing excuse me for speeking english.
i have a problem with windows in after effect in my monitor
my monitor is 15.6 and resolution is 1366*768
for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
Thanks.

Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
Mylenium

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

Problems with Windows VISTA and WPA-2

Hi Guys,
I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
Is that a common problem in Windows Visa (I am using Home Edition)?

Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

Problem with Windows 8.1 and Corseca Byte BT headset

I recently bought a Corseca Byte bluetooth headset.
The headset works fine with phones.
Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
and restart it works fine unless it lays unused for some time.
Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
How to solve the issue?

Hi,
Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
Kate Li
TechNet Community Support

Problems with Windows 7 home premium and ovi

Excuse me for my english.
I've a big problem with Windows 7 and NOKIA N97 32G
I install the latest version of Nokia Ovi Suite 2.0.2.42. When I connect the phone with USB and select PC suite mode in the phone, OVI don't see the phone and say method not compatible.
I can't synchronize the phone.
Help me.
Thanks

I just want to say that many Nokia Ovi Suite problems have showed up for me recently. I tried everything (including many reinstalls, cleans, etc.) and nothing helped.
Finally I found the solution:
I realized that I have installed Service Pack 1 on Windows 7 (32-bit), and this stopped Ovi Suite from working correctly. The solution is to run Ovi Suite in compatibility mode as "Windows 7"
(You may be surprised to run an application in "Windows 7" compatibility mode on Windows 7. But after installing Service Pack, it is no longer "Windows 7" but it is now "Windows 7 SP1"! This is different. So "Windows 7" is the old mode without the service pack, and in this old mode Ovi Suite works.)
Concluding: After installing Service Pack 1 just use compatibility mode as "Windows 7" to run Ovi Suite, and this program should work OK (at least for me it works on a 32-bit OS).
PS. My version of Ovi Suite is 3.0.0.290

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Fafter upgrading to mavericks,I had problems with windows 8.1, so deleated partion to start over. Everthing went fine until The fact I was using an upgrade disc instead of a bootable version. Now everthing is loocked up and none of the hotkeys work

after upgrading to mavericks, I had problems with windows 8.1. I deleated the partition to start over. Upon try ing to reinstall 8.1 everthing locked up. I had an upgrade disk instead of bootable. Now every time I turn the computer on "it asks for bootable media"; none of the hot keys work to get back eo mac os

You mised the last part where none of the hotkeys are working,neither options nor "X" it goes ms 8.1 boot up and asks foe a bootable disc. I am about to pull the HD put it into a case attach it to another computer and delete the file

Can I upgrade to maverick, and still working with windows partitions without any problem?

I have a MacBook Pro runing Mac Os 10.6.8, and a partition runing windows 7, I want to Upgrade to Maverick.
Can I upgrade to maverick, and still working with windows partitions without any problem?

yeah I installed win7 64bit pro on lion and have since upgraded osx to mtn lion and then mavericks
and the windows partition to win8 and then win8.1 never done a reinstall of anything

Ratpoison: Problems with windows autoscaling and conky statusbar

Hi all!
I am newbie with ratpoison and yesterday made fresh installation. Everyting else did well expect window autoscaling and conky + dzen2 statusbar.
What I did:
I followed those steps from archwiki for setting up dzen: https://wiki.archlinux.org/index.php/Dzen
my .conkyrc looks like a same as in the wiki:
background no
out_to_console yes
out_to_x no
update_interval 1.0
total_run_times 0
use_spacer none
TEXT
^fg(\#ff0000)${loadavg 1 2 3} ^fg()${time %a %b %d %I:%M%P}
my .xinitrc looks like:
#!/bin/bash
FG='#aaaaaa'
BG='#1a1a1a'
FONT='-*-terminus-*-r-normal-*-*-120-*-*-*-*-iso8859-*'
conky | dzen2 -e - -h '16' -w '600' -ta r -fg $FG -bg $BG -fn $FONT
feh --bg-scale /home/tetrao/walls/hn.jpg &
# setup urxvtd daemon
urxvtc "$@"
if [ $? -eq 2 ]; then
urxvtd -q -o -f
urxvtc "$@"
fi
unclutter -root -grab -idle 1 &
exec ratpoison
and .ratpoisonrc
startup_message off
escape C-z
set padding 0 16 0 0
bind x exec $(dmenu_path | dmenu)
bind C-x exec $(dmenu_path | dmenu)
bind c exec urxvtc
bind C-c exec urxvtc
bind b exec uzbl-tabbed
bind C-b exec uzbl-tabbed
# Undo
bind u undo
bind C-u undo
definekey top Print exec import -window root ~/ss-`date +%Y%m%d%H%M%S`.png
definekey top S-XF86AudioRaiseVolume exec ratvolume Master 3%+
definekey top S-XF86AudioMute exec ratvolume Master 0
definekey top S-XF86AudioLowerVolume exec ratvolume Master 3%-
definekey top XF86AudioRaiseVolume exec ratvolume PCM 3%+
definekey top XF86AudioMute exec ratvolume PCM 0
definekey top XF86AudioLowerVolume exec ratvolume PCM 3%-
definekey top C-S-Up focusup
definekey top C-S-Left focusleft
definekey top C-S-Down focusdown
definekey top C-S-Right focusright
definekey top C-M-Up prevscreen
definekey top C-M-Down nextscreen
definekey top M-l exec ratpoison -c "select -" -c "gprev" -c "next"
definekey top M-h exec ratpoison -c "select -" -c "gnext" -c "next"
definekey top M-j next
definekey top M-k prev
So I did 16 pixels hole for the conky statusbar. Still I cannot see anything on the top of screen. (Just empty hole)
Problem with windows autoscaling is that it doesn't fullfill whole screen. I can also see two additional small holes at the bottom and right side of screen (eventhought I didn't made those by the config). Strange isn't it?
I put my print screen, hope it tells more about the problem:
What I should to do text? Edit some files, but I dunno which one and how?
I appreciate your help.
Cheers!

fr33ke wrote:
About the small holes, see "Why is there a small gap between my terminal and the edge of the screen?" in the ratpoison FAQ.
I'm not sure about your dzen/conky problem, maybe you need to "unmanage" its window? See the ratpoison documentation.
That fixed autoscaling issue. Thx a lot!
Any ideas, what is wrong with dzen+conky bar? I quickly read ratpoison manual and didn't find any help for this problem.

Problem with Windows Media Player since installing Firefox 4.0

Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

What can I do to get the Windows Media Player to work properly?

MS6712 Video and LAN problems with Windows 98SE

Similar Messages

Maybe you are looking for