Msa50-workbench: how to set field sort1 from field sortl ?

Hello forum,
in tile bp -> details, I've mapped ctrlSortfieldT to BO Attribute Sortl.
So i can see the sortfield in bp-details.
But in order to exchange this mandatory-field with crm-online/r3,
I have to fill field sort1 in msa.
How can I set this field while updating the bp-detail dataset ?
Has anybody an idea esp. coding ?
Best regards
Gerd

Hi Gerd,
It is very simple.
Select the event on which you want the things to get saved. Or if its a general input field, no need to even program the events.
On change of the field system take a note that field is changed. and when you save the Business component by pressing save button, automatically a outbound queue in mobile is created to send the data to CRM Server.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Similar Messages

How to set a default "from" field on outgoing Mail message

i read through the last few pages of this support forum and googled my topic but i havent found a suitable solution.
in Mail v 3 (3.4) there is a "From:" field in any outgoing mail. very useful for those of us with multiple non-accounts and/or .Mac aliases. i generally set a specific outgoing mail server (so that field is removed from outgoing email).
my problem is how to set a default outgoing email address so that my recipients always get from a certain (eg work) email address when i am at work. at work, anything i send, i want to show my work email without always having to manually select the "FROM" field in the outgoing email.
( aside: i had read that Mail version 3 was supposed to auto-select any reply so that the reply would come from the same email i orginally sent as. this does not work on my mac.)
This problem is exacerbated as Mail auto-rotates between my 4 email accounts/aliases (which are all listed (correctly) in the FROM field. it would be great if this list could be fixed with a default FROM address.
eg i send an email from my work email address (FROM: [email protected]) the next email i send will be rotated through my list of .mac aliases. i.e. the next email i send will not be from [email protected], but from [email protected] the next time it might move on to [email protected] or it might revert to [email protected]
any thoughts on how to fix?
i have tried deleting the home/library/preferences/com.apple.mail.plist. that is fine, but any .mac aliases (which i do use, but i dont want to be listed in the "FROM" field) are listed in the "FROM" field, and are auto-switched through my Mail again.
i looked through Rules and Automator, but no obvious help there. any thoughts?

Did you try Preferences > Accounts > Account Information and entering these other email aliases in the Email Address: field, separated by commas? That would give you a pop-down menu in the New Message window letting you choose which alias to use when sending an email.
If you go to Preferences > Composing, there should be a pop-down menu near the middle of that window labeled "Send new mail from:" which will let you choose any email address you have entered in the Account Information field mentioned above, or "Account of last viewed mailbox" as the default.
Mulder

How to set a language from LTR to RTL in illustrator cs4

how to set a language from LTR to RTL in illustrator cs4.....plz help

Mac or PC
In either case the language has to be selected on the Mac go to the SystemPreference and language and text and select arabic as the language etc.
That should do it.
Oh, yes just in case you have to also select and arabic type face and it helps if you have a ME computer.

TS4006 how to set a tracking from the computer if someone stolen the ipod

how to set a tracking from the computer if someone stolen the ipod

Welcome to the Apple Community.
You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How to set up printer from ipad?

how to set up printer from ipad?
Johs.

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

How to set iframe src from java dynammically

Hi,
Iam calling a servlet from jsp and servlet calls the databse query and returns the value,
in my jsp i have ifrme, i want to change the source of iframe from java depends on the result from database , and the result must display on the iframe can any one tell me how to do this

aurelian_cl wrote:
I need to know how to set environment variables from java
I want to set from java for example the environment variable "TestVar" with the value "TestValue"!1) That functionality does not belong in an application. You're trying to set environment variables, which are global across all applications, at either the user level as a whole, or across the entire machine (system level). Or, if you're only trying to set a variable active for the current process, you don't need to do that.
2) Environment variables are not a platform-independent entity, and are thus against the nature of Java.
My gut feel is that you are designing something in a backwards way, so my point is mainly to point that out, not to try to help you solve that particular problem.

How to read the field type from field id of DynamicFldTbl

Hi,
In my application, i am using DynamicFldTbl, whch parses FML32 field table definition file. My field table definition file contains information about field names and its types.
I checked the API of DynamicFldTbl and didn't find any API to get the field type from field it.
Any way to read the field type from field id?
Thanks in advance
Raguraman

Hi Raguraman,
Once you have the field table, you can then create an FML32 buffer (TypedFML32) using the constructor that takes a field table, and then use the Fldtype() method on the specific field ID you wish to get the type of. I know this is sort of tedious and we should provide Fldtype() and some others on the field table class directly.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

How can I change the "From:" field in iOS Mail?

This is a weird one.
I have a gmail work email account that has been set up for me. There's a primary email address assigned to it, and a secondary one (which is the one I want to use).
No problem at all sending from the secondary account on my MacBook Pro. I just hit the drop down menu by the "From:" field, and I can select it from there.
However, when I send from my iPhone, I'm only given the option of sending from my primary email address, not the secondary one. This is despite the fact that I've synced Mail accounts via iTunes.
Any idea how I might fix this so I can send from the secondary account on my iPhone?

First of all, please fill in the Computer Model and Operating System fields on your My Settings’s profile (and click Save). This is essential information that should always be provided when asking for help.
Now, what does “I can't change it” mean? What appears in the From header of the messages you send is determined by your Mail > Preferences > Accounts > Account Information settings...

How to use alias in "From" field when I send a mail with utl_smtp ?

Hi all,
I'm using a PL/SQL package with an Oracle 11G database to send mails. It works fine but instead of use of my mail in "From" field like "[email protected]" as sender E-mail address, I would like to have "Toto" in the sender address. I tryied to use utl_smtp.mail(l_connection, '<toto> [email protected]') but it doesn't work. The only way I can send mail is when I set utl_smtp.mail(l_connection, '<[email protected]>') directly. When I use the Alias, I have an error from smtp server telling that I use a bad syntax address.
Does someone know how to use the alias ? Where do I do a mistake ?
Thank you for your help.
sis2b

Thank you, I find how to solve the problem thanks to your link.
I try to send HTML E-mail so I had the From in the from field writen in the header of the mail and not to initialize the connection.
sis2b.

How to set the 'default to' field of a dashboard prompt to yesterday?

Hi everyone,
I have a dashboard prompt on a date (fully qualified name Date.Date and type Date).
I also have a simple report with two columns: Date.Date and a mesure (whatever the name).
I managed to filter on the day before the current date in the report by adding an advanced SQL filter:
Date.Date = Cast(TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
Now, I would like the prompt to select the day before the current date by default.
The filter on Date.Date would be 'is prompted' or so.
How do I set the "Default to" field of the prompt?
Thanks in advance

Hi
go to your prompt..
select SQL Results from Default to: dropdown..
here.. you need to write your Logical SQL..
which defaults to the previous date
some thing like this..
*select case when 1=0 then anydate column else timestampadd(sql_tsi_day, -1, CURRENT_DATE) end FROM SubjectArea name*
write like this.. and report back...
Thanks & Regards
Kishore Guggilla

Setting value in 'FROM' field while replying the mail

Hi,
I am working on one issue, In component CRMCMP_CCS_EML, while replying the email, i need to read the 'TO' field and on the basis of that i need to set the value in 'From' field. How can I recognize that this is a reply and not a new email. Also, could anyone please describe me in detail as i never work on email component before.
Regards,
Kamesh Bathla

This issue has been resolved.
I got the message mode by using
message_mode = typed_context->mail->messagemode.
got all the options for from address using
lt_from_addresses[] = typed_context->mail->GT_DEFAULT_FROM_ADDRESSES[].
got the original email address using
lr_gdc ?= cl_crm_ui_data_context_srv=>get_instance( ).
CALL METHOD lr_gdc->get_entity
EXPORTING
name = c_currinboxitem
RECEIVING
value = lr_inbox_item.
CALL METHOD lr_inbox_item->get_property_as_value
EXPORTING
iv_attr_name = 'SOF_RCP_ADDR'
IMPORTING
ev_result = lv_original_mail

How to set space between the fields in SearchPG- Display issue

Hi Friends
I Have created a searchPG with a QueryRN , In my searchPG i have some display issue after running the page its looks like this
For Example assue its a page with 3 field and one table region
Employee no
Employee name
Phone no
ResulttableBut i want my searchPG should hav some space between two field as shown below
Employee no
Employee name
Phone no
ResulttablePlease adviice me
I appreciate all ur advice
Thanks
A.T

Hi Peddi
In my structure pannel I have simpleSearchPanel below that only i have the two lov fields ex: emp_no and emp_name . how to set the spacer between this From which Region where can find the spacer bean what proerty do i need to set
Thanks
AT

How to Set Prompt of a Field in OAF using lookup

Hi Gurus!!
We have a requirement to change the Prompt of some fields and also have to give the flexibilty to the business user's so that in case if they wants to change the promt of a field in future then they should also be able to change it.
Is it possible to set the promt of field using lookup. So, that if users want to change it then they can go and change the lookup value .
If yes, can you please give me an example of this code .
Please let me know if any alternative approch is there to achive this requirement.
Any help would be grately appreciated.
Thanks
KR

Hi KR,
System.out.println(">>>"+pageContext.getMessage("FND", "FND_TEST1", null)); *//displying my custom msg*
is the message is printing the value,?
projNum.setPrompt(pageContext.getMessage("FND", "FND_TEST1", null));
Instead of above can you try with a hardcoded value like,
make sure projNum is not null, you can just print the value projNum.
projNum.setPrompt("Test Prompt");
And one more way you can try is create a VO which will pickup the value from Lookup
and use dataBinding (PROMPT_ATTR) and set the value.
You can search the forum for how to use the dataBinding
Eg.
OAMessageTextInputBean mTextBean_Y =
(OAMessageTextInputBean)tbl.findChildRecursive("NU_Y");
if (mTextBean_Y != null) {
OADataBoundValueViewObject promptNU_Y =
new OADataBoundValueViewObject(mTextBean_Y,
"QuestionName");
mTextBean_Y.setAttributeValue(oracle.cabo.ui.UIConstants.PROMPT_ATTR,
promptNU_Y);
Thanks,
With regards,
Kali.
OSSi.
Added sample code.

How to set Exch.rate-acct. field on Billing tab of billing document item

In R/3 4.7, we have billing documents with different values for Exch. Rate on each line item. We want the values to appear also in the Exch.rate-acct. field so the values will apply to the line items on the FI document. They are greyed out for us.
Does anyone know what to set to allow this field to be entered?

Lisa,
Not sure about 4.7, we used userexit_fill_vbrk_vbrp (rv60afzc) back on 4.5 to populate Exch.rate-acct field with the rate which was different from the rate used for invoice. I think you may put some logic into this userexit to populate the field based on your rules.

How to set EXPORT parameter from message mapping

Again, ask the question of export parameter.
I wrote a java version transformation and it worked good with export parameter.
However I can not work it out in graphical message mapping. I refered http://help.sap.com/saphelp_nwpi71/helpdata/en/43/c3e1fa6c31599ee10000000a1553f6/frameset.htm.
In PI7.1, I add an export parameter "EXPORT_PARA" in the "Signature" tab. Are there any special step to assign this parameter to an UDF? I did not find a way to do it.
And then I define an UDF,
public String SetExportPara(String sss, Container container) throws StreamTransformationException{
String str = "GOOD";
GlobalContainer gc = container.getGlobalContainer();
OutputParameters paras= gc.getOutputParameters();
if(paras.exists("EXPORT_PARA ") == true) {
paras.setString("EXPORT_PARA ", str);
}else {
str = "NOT FOUND EXPORT_PARA";
return str;
And I assign this UDF to one element of my output XML, I tried to run it in IE, it always output "NOT FOUND EXPORT_PARA.
why?????
I know there is a blog : https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/8654. [original link is broken] [original link is broken] [original link is broken]
But it did not talk how to set export parameters.

Hi,
i read thread
How to export parameters from Message Mapping
and blog
/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
but not found issue
in this topic
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/c3e1fa6c31599ee10000000a1553f6/frameset.htm.
if i writting this code in UDF, i getting an error.
If use this code:
GlobalContainer gc = container.getGlobalContainer();
OutputParameters paras= gc.getOutputParameters();
paras.setString("EXPORT_PARA ", str);
the export parameter is defined locally (in transformation step area). In integration process area parameter is equal to NULL.
How send export parameter to Integration Process? For exapmple, i wanna send parameter to other transformation step in my integration process.
thx.

Msa50-workbench: how to set field sort1 from field sortl ?

Similar Messages

Maybe you are looking for