MSAD configuration with shared services issue?

Hi
i recently configured MSAD with shared services.but the problem is the hfm users are not in the same group in msad.so i am not getting all hfm users.so i configured 2 more msad groups.
now the problem is while configuring we have to give user name & password of any user in that group.here the password will change for every 45 days.and it is pratically not possible to have others password for the administrator to change for every 45 days in shared services.
is there any other solution for this problem.
HYperion 11.1.1.2
regards
bharat.tv

Can you not set up an one service account that exists in all the groups and doesn't have its password expiring?
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

MSAD Configuration with Shared Services

Hi,
I have just sucessfully configured MSAD to the HFM SS but 1 concern is that anyone with the domain suer login is able to login to shared service although limited function are available. Is there anyway to control other users except my users to login?
I do not want to use Native to create user as it will means another set of password to rememberr for the users, would prefer they use their normal domain accoutn to login.
Thanks

In addition to other comments, users can only make changes in Shared Services if they have Shared services roles assigned. Also, we use MSAD with both local and AD groups, and as long as you know the effective rights, it works out fine either way. The Shared services roles are listed below (Security Administrator's Guide pp 135-136):
Administrator: Provides control over all products that integrate with Shared Services. It enables more
control over security than any other Hyperion product roles and should therefore be
assigned sparingly. Administrators can perform all administrative tasks in User
Management Console and can provision themselves.
This role grants broad access to all applications registered with Shared Services. The
Administrator role is, by default, assigned to the admin Native Directory user, which is
the only user available after you deploy Shared Services.
Directory Manager: Creates and manages users and groups within Native Directory.
Do not assign to Directory Managers the Provisioning Manager role because combining
these roles allows Directory Managers to provision themselves.
The recommended practice is to grant one user the Directory Manager role and another
user the Provisioning Manager role.
LCM Manager: Runs the Artifact Life-Cycle Management utility to promote artifacts or data across product environments and operating systems
Project Manager: Creates and manages projects within Shared Services
Create Integrations: Creates Shared Services data integrations (the process of moving data between
applications) using a wizard.
For Oracle's Enterprise Performance Management Architect, creates and executes data
synchronizations.
Run Integrations: Views and runs Shared Services data integrations.
For Performance Management Architect, executes data synchronizations.
Dimension Editor ( includes Dimension Viewer and Interactive Editor):
Creates and manages import profiles for dimension creation. Also, creates and manages
dimensions manually within the Performance Management Architect user interface or the
Classic Application Administration option.
Required to access Classic Application Administration options for Financial Management
and Planning using Web navigation.
Dimension Viewer can read or view dimensions. This role automatically maps to the
Dimension Reader access on dimensions.
Interactive Editor can modify members within a dimension, and grants dimension writer
access to all dimensions. Does not allow users to delete dimensions.
Note: Dimension Viewer and Interactive Editor roles are reserved for future use.
Application Creator (includes Analytic Services Application Creator, Financial Management Application Creator, Planning Application Creator, External Application Creator): Creates and deploys Performance Management Architect applications. Users with this
role can create applications, but can change only the dimensions to which they have
access permissions.
Required, in addition to the Dimension Editor role, for Financial Management and
Planning users to be able to navigate to their product’s Classic Application Administration
options.
When a user with Application Creator role deploys an application from Performance
Management Architect, that user automatically becomes the application administrator
and provisioning manager for that application.
The Application Creator can create all applications.
The Analytic Services Application Creator can create Generic applications.
The Financial Management Application Creator can create Consolidation applications
and Performance Management Architect Generic applications. To create applications,
the user must also be a member of the Application Creators group specified in Financial
Management Configuration Utility.
The Planning Application Creator can create Planning applications and Performance
Management Architect Generic applications.
The External Application Creator can create external views and export application views
but cannot export the library.
Note: External Application Creator role is reserved for future use.

Errors in LDAP configuration with Shared Services

Dear sirs,
we are getting errors in LDAP configuration with Shared Services.
Base DN is ou=Grupos,cn=East,o=SSGH,c=br,o=Grupo East
The group cn is cn=AH
In LDAP log you can see the applications is searching the group:
"ou=Grupos,cn=East,o=SSGH,c=br,o=Grupo"
When it should be:
“ou=Grupos,cn=East,o=SSGH,c=br,o=Grupo East”
We think the problem is with space in Base DN "o=Grupo East", it is not properly considered.
Error Codes
EPMCSS-05145
Thanks in advance

Hi.
Could you try to define the Base DN as :
ou=Grupos,cn=East,o=SSGH,c=br,o=Grupo\ East
I don't know if will work fine.. but you can use special characteres using with the "\"
Good luck.
Best regards!

Error While Configuring the Shared Service with Active Directory

Hi All,
I am getting a error while configuring MSAD with Shared Service, when entering the User Id and password and clicking next, the following error is displayed:
"EPMCSS-05180:Failed to validate Security configuration. Failed to connect. Invalid values for Base DN, User DN or Password. Enter valid value(s). Root Cause : [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]"
The AD user has the read access to the all users and group in Active Directory. If I use an Active Directory user with Admin privilege, It is getting connected.
But client is not ready to provide the Admin Access due to their internal policy and I also don't have any document which says admin privilege is required. According to the document,the user should have the following privileges only.
"The distinguished name of the user that Shared Services should use to bind with the user directory. This user must have search privilege on the RDN attribute within the DN. For example, in the dn: cn=John Doe, ou=people, dc=myCompany, dc=com, the bind user should have search access to the cn attribute.Special characters in User DN must be specified using escape characters. See “Using Special Characters” on page 46 for restrictions.
Example: cn=admin,dc=myCompany,dc=com
But I am getting confused with the statement "This user must have search privilege on the RDN attribute within the DN". Is it not search privillege?
Can anybody help me with required privilege for Active Directory user to configure with Shared Service.
Thanks in Advance,
Sunil

Thank you All,
i tried connecting using AD Browser from Microsoft, and it went in properly. then i found out that the AD Team here were giving a Wrong Credentials to connect, they Gave me HYP_OID which infact turned out to be a Principal name instead of a 'cn'.
after searching in the AD Browser i found the correct cn which is "Hyperion OID", then it went to the second Screen where now i am trying to search for the Users based on thier Job Nature.
Thank you for all the Support Guys, you both "Celvin" and "John" are the Top Guys under my Search list for any technical Assistance.
Thank you once again Friends....
Regards,
Sunil...
Shantan....

Shared Services issue with MSAD

Hi, I recently configured shared services to authenticate to a remote MSAD server. the configuration went well and all the users in the remote MSAD came thru to the shared services, and I can even provision the new users.
however, after the provisioning, no new users can login to the apps that were provisioned for them, there's always the authentication error.
p.s. there's already a working MSAD domain on shared service. I ran into the issue when I tried to configured a second one.
thanks

Hi
In shared service web interface, you will find in the top menu "synchronize external directory" or something like that.
Laurent

Configuration of EPM 11.1.2 Shared Services issue during installation

Hi,
I am running into issue with configuration of Shared Services after installing EPM 11.1.2 on my machine. I am running the installation on Windows 8 and 64 Bit. All of the components that I wanted installed successfully. After that I went into the Configuration for Shared Services, I ran into the issue with the status of Deploy Application to Server not completed successfully (configuring...). I was hoping to configure one thing at a time as suggested in the blogs.... then I'd configure Essbase and not Financial Reporting...in that sequence. Thus, I also do not see any of the services installed under Foundation Services; Shared Services URL, Start EPM nor Start FoundationServices (Oracle Weblogic 10) tmplink.
I've tried to search online but found nothing specific on the issue. Am I missing something? Please help.
Thanks

Windows 8 has not been officially released yet so don't expect EPM products to support it.
Cheers
John
http://john-goodwin.blogspot.com/

'register with shared services' option missing while configuring eas

I am facing some issues while configuring a new epm system:
While configuring eas 11.1.2.0, I am not getting the option' Register with Shared Services'. but otherwise, the configuration is successful. As a result, I don't see the Business Rules option in Shared Services/Application Groups. But we are able to use eas console and do see business rules node in eas console.
How do I get configurator to show this option?
I was able to configure and register all other Hyperion applications.
Thanks,
Edited by: 784749 on Mar 28, 2012 12:35 PM
Edited by: 784749 on Mar 28, 2012 12:59 PM

One way is to use the registry tool though make sure you backup the shared services database before running the utility.
It is located in <MIDDLEWARE_HOME>/user_projects/<instancename>/bin
to change the status for EAS for HSS then run the following
epmsys_registry updateproperty BUSINESS_RULES_PRODUCT/system_tasks_configuration/@hubRegistration Pending
Now if you run the configurator again it should let you select just Essbase Administration Services, you dont need to select the child components.
It should then registry with Shared Services.
Cheers
John
http://john-goodwin.blogspot.com/

Troble configuring Hyperion Shared Services with SQL Server 2005

I recently installed SQL server (SQL SERVER 2005) in my machine and then am trying to install Hyperion (9.3.1) products. I started with Shared services. It was installed successfully. Problem is occuring when am trying to configure Shared service with SQL database using Hyperion Configuration utility (9.3.1)
The error which is popping up is
Unable to connect to the database for the product Hyperion Shared Services.
Things which I tried from my end
1. Made sure TCP IP Protocol was enabled in SQL server configuration server.
2. hypuser was created in SQl server.
3. hypdb was created in SQL server.
4. Was having dynamic IP address so install Loopback adapter to obtain Static IP address and port.
5. Port and IP address was correct.
Let me know where I am going wrong.
Any help will be greatly appreciated.

Finally got it fixed firewall settings needed to be change : This document helped me a lot to troubleshoot the issue
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
This problem may occur when SQL Server 2005 is not configured to accept incoming local and remote connections, which is disabled by default in SQL Server 2005 Express Edition, SQL Server 2005 Developer Edition and also SQL Server 2005 Enterprise Edition. To solve the connection forbidden problem, SQL Server 2005 needs to configure to allow incoming local and remote connections.
Firstly, ensure that SQL Server 2005 is configured properly to allow incoming connections on the instance of database server, else enable and turn on the local and remote connections setting.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine tree, click Remote Connections.
Select Local and remote connections, or Local connections only which applicable only if there is no remote system tries to connect to the SQL Server, useful when you just trying to connect and authenticate with the server after installing.
Select the appropriate protocol to enable to local and/or remote connections environment. To ensure maximum compatibility, select Using both TCP/IP and named pipes.
Click Apply button when done.
Click OK button when prompted with the message saying that “Changes to Connection Settings will not take effect until you restart the Database Engine service.”
On the “Surface Area Configuration for Services and Connections” page, expand Database Engine, then click Service.
Click Stop button to stop the SQL Server service.
Wait until the MSSQLSERVER service stops, and then click Start button to restart the MSSQLSERVER service.
Secondly, SQL Server Browser service has to be enabled to allow for local and remote connections if SQL Server 2005 is running by using an instance name and users are not using a specific TCP/IP port number in the connection string.
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Surface Area Configuration.
On the “SQL Server 2005 Surface Area Configuration” page, click Surface Area Configuration for Services and Connections.
On the “Surface Area Configuration for Services and Connections” page, click SQL Server Browser.
Select Automatic as the Startup type to start SQL Server Browser service automatically every time system starts.
Click Apply button.
Click on Start button to start the service immediately.
Click OK button.
Finally, if remote computer needs to connect and access SQL Server, an exceptions in Windows Firewall included in Windows XP SP2 (Service Pack 2), Windows Server 2003 and Windows Vista needs to be created. If you’re using third-party firewall system, the exception rules also needed to be created to allow external remote connections to the SQL Server 2005 and SQL Server Browser Service to communicate through the firewall, else connections will be blocked. Consult the firewall manual for more details. Each instance of SQL Server 2005 must have its own exception, together with an exclusion for SQL Server Browser service.
SQL Server 2005 uses an instance ID as part of the path when you install its program files. To create an exception for each instance of SQL Server, you must identify the correct instance ID. To obtain an instance ID, follow these steps:
Click Start button, then go to Programs or All Programs, then select Microsoft SQL Server 2005, followed by Configuration Tools. Click and run the SQL Server Configuration Manager.
In “SQL Server Configuration Manager”, click the SQL Server Browser service in the right pane, right-click the instance name in the main window, and then click Properties.
On the “SQL Server Browser Properties” page, click the Advanced tab, locate the instance ID in the property list.
Click OK button.
Then create an exception for SQL Server 2005 in Windows Firewall.
Click on Start button, the click on Run and type firewall.cpl, and then click OK. For Windows Vista, type firewall.cpl in Start Search box and press Enter key, then click on Allow a program through Windows Firewall link on left tasks pane.
In “Windows Firewall”, click the Exceptions tab, and then click Add Program.
In the “Add a Program” window, click Browse button.
Click the C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe executable program, click Open button. MSSQL.1 with is a placeholder for the instance ID that is obtained from previous procedure. Note that the path may be different depending on where SQL Server 2005 is installed.
Click OK button.
Repeat steps 1 through 5 for each instance of SQL Server 2005 that needs an exception.
For SQL Server Browser service, locate the C:\Program Files\Microsoft SQL Server\90\Shared\sqlbrowser.exe executable program, and click Open button.
Click OK button.

Issue with shared services - Need Urgent Help please!!

Hello Experts
One of my customer has installed a new instance of oracle and copied all the schemas and data over to the new instance.
Now when they bring up shared services, have lost all our provisioning. None of the projects are recognized by shared serices and gets the following error when we try to bring up a user
'xxxxx' is not a recognized Shared Services project. Please contact your adminstrator
Is there something we need to do to restore Shared Services to its original state?
Thanks in advance.
Regards,
Sonu
Edited by: 637223 on Jan 20, 2009 2:19 AM

hi,
I doubt that "creating a new instance of oracle and copied all the schemas and data over to the new instance" will register the project with shared service and thats why giving error. Because when you install shared service, it asks you about the database name (oracle in your case) to register with. So even if you overwrite that database by new instance it gives error.
Have you tried the configuration utilty ? Over there you can provide the new database instanse as your database and configure your shared service. Remember that you need to do a complete configuration of shared service , analytic administration services and analytic services. After configuring, Restart the system.....it should work.
Hope this helps!
Regards,
James

Urgent: Error in registering HFM with Shared Services while configuration.

Hi,
I am installing HFM 11.1.2 on a 64-bit Server 2008 platform with my Foundation Services server is on different
Machine. I have installed installed HFM client, Web Application and Services on both the server.
But i have configured "Deploy to Application Server" on Foundation Server to have a single domain.
All other configurations are done on the HFM Server only.
But during to Deployment to application server my "Register with shared services" part fails.
My foundation services are running. Do i require to Configure DCOM on foundation server also.
Please suggest me some ways to solve this problem.
Regards,
Arvind

Johan,
you are right, now the user are given with dba priv ,
now i am getting the below error,
(Nov 11, 2008, 05:30:03 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
at com.hyperion.ess.EASDBConfigurator.configure(EASDBConfigurator.java:252)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
Please let me know your suggestions.
Thanks,
bhavani

FDM Configuration - no option for 'Register with Shared Services'

Hi All,
I'm running the confiiguration for a new install of our Hyperion environment and when I run the configuration on our FDM server, the summary of tasks does not show 'Register with Shared Services'. We have installed this following the exact same steps as we did in a prior test environment and this option shows up fine in there.
Does anyone know how we can add this item to the configuration?
Thanks in advance.

Andy,
If they were truly identical then the option to register with HSS would be there.
Something must not be identical in the system.
Check the installation logs to verify that the Oracle/Hyperion software was installed properly.
Check with IT to ensure that the servers were built the same.
Thank you,

EAS # problem with shared services

EAS registration with Shared Services failing. The HYPERION_HOME/logs/config/configtool_err.log file shows the following error:
com.hyperion.cis.config.CmsRegistrationUtil, ERROR, register operation failed in CMS:
com.hyperion.interop.lib.OperationFailedException: Product already exists.Registeration failed: error.generalSaveModel.Product already exists.Registeration failed: error.generalSaveModel.
at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication

seems users info is missing and results like this ...iam not sure which one would be
Delete all contents from the eas folder,....
Restart the services.
Configure EAS with Shared Services
Restart the EAS server.
this should help ...it happened some time ago ..iam still not sure what exactly the issue but it helped me to solve my issue
let me know if dont work

Registration with Shared Services failed for EAS, APS, Workspace & Planning

Hi All,
I have installed 11.1.1.3 hyperion suite with OAS as web application server.
The architecture is
Server 1: Shared Services
Server 2: Workspace
Server 3: Planning
Server 4: EAS & APS
Server 5: FR & Web Analysis.
Registration of Planning, EAS, APS & Workspace with shared services failed. Configtool_err.log says:
(May 23, 2011, 05:36:52 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(May 23, 2011, 05:36:52 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
Error Code: -1
com.hyperion.css.common.configuration.CSSConfigurationException: 20:3008:Failed to connect to native directory.      Error Code: 9
     at com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
     at com.hyperion.css.spi.CSSManager.initProviders(Unknown Source)
     at com.hyperion.css.spi.CSSManager.initialize(Unknown Source)
     at com.hyperion.css.spi.CSSManager.<init>(Unknown Source)
     at com.hyperion.css.spi.CSSManager.getInstance(Unknown Source)
     at com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
     at com.hyperion.css.CSSSystem.getInstance(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.getStandAloneCSS(CmsRegistrationUtil.java:440)
     at com.hyperion.cis.config.CmsRegistrationUtil.<init>(CmsRegistrationUtil.java:82)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:422)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(May 23, 2011, 05:36:53 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: null
(May 23, 2011, 05:36:53 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
I tried to telnet port 7777 & 28089 of server 1 from each server. The connection failed. I have asked the network team to open the required hyperion ports
Can anybody help me on this.
TIA

Just out of interest why have you used OAS as it is pretty much dead product now and is not used in future releases.
Anyway I am not sure why you have closed ports between those servers, you will end up spending a lot of time trying to open all the required ports between the servers.
Can you not get all the ports open for a time just to check it definitely is a ports issue.
It is probably also worth checking the following spreadsheet out - http://www.oracle.com/technetwork/middleware/bi-foundation/epm-components-communications-fd-11-128629.xls
It highlights the ports used in communication.
Cheers
John
http://john-goodwin.blogspot.com/

Planning Appl not able to register and unregister with shared services

Hi All,
I created a planning application before that I created a datasource. After crearting an application I got an error as Application not able to register with shared services .
And also I am facing one more issue that is if I delete any particular planning application at that time I got an error as Application not able to unregister with shared services.
I am able to open the planning application through http://<planningmachine>:8300/HyperionPlanning/AppWizard.jsp and its working fine. I am able to open the Shared Services though Workspace but I am not able to find the option for planning application.
Kindly guide me how to overcome it.
Thanks and Regards
ChiDam

Have you checked the logs? Found something?
This normally happens when there is issue with Planning app and cluster mapping. For some reason, the application maps to non-existent cluster in Planning system schema resulting in failure of HSS registration. you can manually re associate the cluster using configuration tool and try registering again.
Cheers..!!

Error Register with Shared Services

Hi,
I have a problem while Registering Shared Services in the Configuration Utility. It displays the following error
(Jun 23, 2009, 08:56:30 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Adding following Apps to Project failed : '3891bc871220d6701ea8000.HPS;'.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerApplication(CmsRegistrationUtil.java:222)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:360)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:165)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Jun 23, 2009, 08:56:33 AM), com.hyperion.cis.config.wizard.CustomSummaryPanel, DEBUG, CustomSummaryPanel in queryExit
I can help me anybody?.
Thanks

Hi,
I have a similar issues, where all the products fail to register with shared services. The error log is as below:
( Jun 24, 2009 1:27:21 AM ): ---- Hyperion Foundation Configuration......
( Jun 24, 2009 1:27:23 AM ): Configure Database :: pass
( Jun 24, 2009 1:27:23 AM ): Common Settings :: pass
( Jun 24, 2009 1:32:35 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:33:18 AM ): ---- Provider Services Configuration......
( Jun 24, 2009 1:33:53 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:34:10 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:34:22 AM ): ---- Studio Configuration......
( Jun 24, 2009 1:34:23 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:34:27 AM ): Configure Database :: pass
( Jun 24, 2009 1:34:39 AM ): ---- Essbase Administration Services Configuration......
( Jun 24, 2009 1:34:42 AM ): Configure Database :: pass
( Jun 24, 2009 1:34:43 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:36:28 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:36:41 AM ): ---- Essbase Configuration......
( Jun 24, 2009 1:36:43 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:36:47 AM ): Essbase Custom Configuration :: pass
( Jun 24, 2009 1:36:59 AM ): ---- Financial Data Quality Management Configuration......
( Jun 24, 2009 1:37:00 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:37:03 AM ): Configure FDM Server :: pass
( Jun 24, 2009 1:37:15 AM ): ---- Planning Configuration......
( Jun 24, 2009 1:37:16 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:39:38 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:39:52 AM ): ---- Smart Search Configuration......
( Jun 24, 2009 1:40:19 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:40:31 AM ): ---- Workspace Configuration......
( Jun 24, 2009 1:40:33 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:41:16 AM ): Configure Database :: pass
( Jun 24, 2009 1:44:57 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:45:14 AM ): ---- Reporting and Analysis Configuration......
( Jun 24, 2009 1:46:33 AM ): Configure Financial Reporting Server :: pass
( Jun 24, 2009 1:50:02 AM ): Deploy to Application Server :: pass
( Jun 24, 2009 1:50:16 AM ): Services Configuration :: pass
( Jun 24, 2009 1:50:35 AM ): ---- Financial Management Configuration......
( Jun 24, 2009 1:50:36 AM ): Register with Shared Services :: fail
( Jun 24, 2009 1:50:47 AM ): Configure DCOM :: pass
( Jun 24, 2009 1:50:47 AM ): Configure Application Server :: fail
( Jun 24, 2009 1:50:48 AM ): Configure Application Cluster :: pass
( Jun 24, 2009 1:50:55 AM ): Register Application Servers / Cluster ::
Any help would be greatly appreciated.

MSAD configuration with shared services issue?

Similar Messages

Maybe you are looking for