MSCA Label printing integration in Synchronous Mode

Hi,
Could anyone let me know if the following requirement of SYNCHRONOUS printing is feasible using MSCA?
Requirement:
To achiveve a real-time synchronous integration mode between MSCA and third party software vendor(ZEBRA printers) that is handled
through a PL/SQL API.
The Setup is as follows:
E-Business Suite Release 12.0.6
Oracle Warehouse Management
MSCA
Zebra Thermal printers
Thanks in Advance,
Appster

Have you check this :
http://blogs.oracle.com/xmlpublisher/2007/05/08#a208
http://blogs.oracle.com/xmlpublisher/2007/05/09#a281
I haven't tried it though, last time I did bar code printing using the ogd files attached to rdf

Similar Messages

Integration of Oracle Apps with the Third Party Label Printing Software

Hi,
I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
Third Party Label Printing Software will pick the file from the TCP/IP Port.
I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
Below are the few links for Oracle WMS:
http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
Thanks In Advance..

Hi,
I assume, i have already setup profile 'WMS: Label Print Mode' to Synchronous - TCP/IP.
Basically, you dont have to create any concurrent program for XML creation, Oracle will do it for you 'out of box'.
Also set 'WMS: Synchronous TCP/IP label request delay' to 100, this is a required step, though none of the documentation talks about it.
if you think that all the requests are not handled correctly, then you will need to increase this delay further.
Lastly, verify that the printer is setup correctly in Oracle (Place where you specify IP Address and port)
Thanks,
Hrishikesh

Integration of Oracle Apps with the Third Party Label Printing Software(Bar

Hi,
I am integrating Oracle Apps R12 with the third party Label Printing Software(Bartender).
For generating the Label, I have to create the XML file in Oracle Apps and with the help of Oracle WMS i have to transfer the XML file to the TCP/IP Port.
Third Party Label Printing Software will pick the file from the TCP/IP Port.
I am not able to find the way to send the XML file generated by the concurrent program to the TCP/IP Port using Oracle WMS.
Below are the few links for Oracle WMS:
http://docs.oracle.com/cd/B25284_01/current/acrobat/115wmsug.pdf
http://docs.oracle.com/cd/E18727_01/doc.121/e13434/T210618T210847.htm#T210864
Thanks In Advance..

Pl do not post duplicates - Integration of Oracle Apps with the Third Party Label Printing Software

Sybase ASE integrator to Oracle 10g use Synchronous mode?

I want to use ODI to replicate Sybase ASE data into Oracle 10g, what I've done is using "JKM Sybase simple" and "LKM SQL to SQL" and "IKM Oracle Incremental Update", then create a interface, create a scenario, create a scheduling running in Scheduler Agent, every 5 seconds get the journalized data from Sybase and refresh to Oracle.
This is acceptable, but my question is: Can I set this scenario in synchronous mode, not pulling changed data every 5 seconds but instead of pushing changed data to Oracle just after DML committed in Sybase?

No, not the current workbench. We will be bringing out support for Sybase 15 in SQL Developer at the next release.
You could try bringing the db down to 12 if that was an option and then migrate from that.
Barry

Label Printing issues on Crystal Reports Server

I built a label that prints off beautifully on my local machine with Crystal XI installed. However, when I post the label to the reports server, and a user tries to print it off, it prints off two blank labels behind each good label. I have racked my brain on this for days. The printer settings are identical to my local machine. Any idea what might be causing this?

I think the following information might help you
Symptom
A label report was viewed over the web using the Web Component Server, and printed on a label maker printer DYMO 330. The labels were being resized to 8 1/2 x 11 instead of printing the size of the label. Even after selecting the correct size, the labels print one per page, followed by 3 blank labels.
When printing was done through a distributed report or the report designer, the labels printed to the correct size and only printed one label with no blank labels.
What is causing the label report to print incorrectly when printed from the web viewer?
Resolution
Steps to Resolve
1. Open the report in the Crystal Reports 8 designer on the web server.
2. Click on 'File' then click 'Printer Setup'. If a printer is already selected then set it to 'No Printer', click 'OK', then save the report.
3. Click on 'File' then click 'Printer Setup' again. Select the default printer and clear the 'Default Properties' checkbox.
4. Click 'OK' and save the report.
5. Click on Start > Settings > Control Panel > Services and double click 'Seagate Page Server' service. Set this service to run under an 'Administrator' account.
6. Stop and restart the service, and close down all browsers.
The label reports now will print successfully over the web.
Background
Incorrect printing from a web viewer can have several causes, including:
· The report is designed with a designated printer, but the encapsulated page format (EPF) files are being created in 'No Printer' mode.
· The server does not have access to the printer.
· A valid printer is not saved with the report on the server.
· The printer driver is not installed on the server.
Regards,
Raghavendra.G

Problem printing horizontal text in smartform with zebra Z6M label printer

hello,
The situation is this:
There is a Z smartform wich prints a label to a zebra Z6M label printer with the text and barcodes vertically.
The form have a command in the main windows with the parameter: S_LZPL_SETUP '^FWR'
This label works fine, but the client want to change the form, they have told me to create a new smartform and print the info horizontally, using the same printer.
The tests i have done are the following:
create a smartform from ground and write a template text and a barcode with a new font of system barcodes. the bardoce is shown ok(it is shown horizontally), the problem is that the template text is shown vertically, as in the original smartform.
then i tried on another zebra ZM600 label printer, similar model, but not the same, and the smartform printed was ok (text and barcodes shown horizontally). So i think is a configuration setting problem, but i dont know where to search.
i have checked the label printer parameters in SPAD, but didnt find anything souspicios.
have you any idea?
thanks in advance.

See these if they be of any help.....
BARCODE:
goto smartform styles-> create a style-->
create a character format.
under standard settings give the bar code name
use this style in ur smartform. select the data field which u want to barcode print and assign the character format
Similarly
SAPSCRIPT
open the form and click the character format button and
repeat the step as above....
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/frameset.htm
Go to Character formate in your form.
create a new char formate with enable BAR code AND
you can give its type too.
To Create a Bar code prefix:
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Which barcode printer are you using ? Can you download this file and see.
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
It will give an idea about barcode commands.
Check this link:
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope this link ll be useful..
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
go through these links and cose u r previous threads,
http://www.sap-img.com/abap/questions-about-bar-code-printing-in-sap.htm
smartform - barcode
http://www.erpgenie.com/abap/smartforms.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/print-barcode-with-smartform-634396
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/printing-barcode-733550
Detailed information about SAP Barcodes
A barcode solution consists of the following:
a barcode printer
a barcode reader
a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
Creating Bar code:
) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
Create a character format C1.Assign a barcode to the character format.Check the check box for the barcode.
The place where you are using the field value use like this
<C1> &itab-field& </C1>.
You will get the field value in the form of barcode.
Check this thread for detail information.
How to print Barcode in te SAP SCRIPTS?

Have problem in label printing program while printing continuously

Dear Gurus,
   i am working on a label Printing program. my requirement is that to print label as below in one page continuously :
     Label 1      Label 2
     Label 3      Label 4
     Label 5      label 6
but i am unable to do , please tell me how to do this . i v already did like this:
     Label 1      Label 1
     Label 2      Label 2
     Label 3     label 3
please reply.

Imagine you have a list (itab1) with one field only (matnr). To achieve what you need, you must create an itab2, with 2 fields (matnr1 and matnr2).
In your print program do something like:
DATA: l_mod TYPE i,
      l_line TYPE i.
CLEAR: l_mod, l_line.
LOOP AT itab1 INTO wa1.
ADD 1 TO l_line.
l_mod = l_line MOD 2.
IF l_mod NE 0. "position1
    wa2-matnr1 = wa1-matnr.
ELSE. "position2
    wa2-matnr2 = wa1-matnr.
    APPEND wa2 TO itab2.
    CLEAR wa2.
ENDIF.
ENDLOOP.
Verify is this code should predict some exceptions (last line or something).
Edit: last line:
ENDLOOP.
IF l_mod NE 0. "position1 was not appended
APPEND wa2 TO itab2.
ENDIF.
Regards.
Valter Oliveira.
Edited by: Valter Oliveira on Sep 11, 2008 1:08 PM

Labell printer printing Issue

Hi ,
I am facing issue on the printing with labell printer. The Labell printer is configured as remote printer >When we give print in windows queue it print fine in Windows. And When we create print queue in HP Unix , the printer is not working (no print from the printer).Please suggest me what need to be done that labell printer can print in HP Unix in romote mode (remote printer).
The labell printer is ZEBRA printer.
Please help me out for resolving this issue ASAP .
Thanks and Regards
Brijesh Prasad

Hi
If you want to print from unix server using SAP, then the methods are
you need to maintain the system IP from where you are giving the print and the printer host name
for ex:-
10.12.90.0 <printername>
from spad check whether you have configure using os level.
Regards
Mohammed Nizam

Label printer recommendation?

Our small business needs a label printer so we can print professional looking labels on client files. We’re not high volume, maybe 8-10 a day, but they need to print relatively quickly and look nice and be easy to use and, of course, Mac compatible. Right now looking at some of the Dymo line. Wondered if anyone had any recommendations.

I'm jealous! When I go to print to my Brother QL-570 from FileMaker Pro 9, the print job gets "stopped" in the print queue. I've tried everything from margin settings in the layout, creating a custom size page in Page Setup, changing the orientation from landscape to portrait. I've even changed the layout from 2.90 by 8.89 cm to 8.89 by 2.90 cm and rotated the fields and printed in landscape mode. There's just way too many variables. Are my margins too small? What's going on? Is it FileMaker? Is the printer? I've clicked on the Utility icon in the Brother's print menu and it says: The roll size in incorrect. Media Size: 1-1/7" x 3-1/2" Description: The status after the last printing operation is displayed. (This may differ from the current printer status.) Note: the inches dimensions here convert to 2.90 x 8.89 cm.
Why can't I just print a simple label from FileMaker? I think I need a step by step procedure to ensure I haven't missed anything.

How to print Integrity sql in the preparedstatement?

How to print Integrity sql in the preparedstatement?
Connection conn = null;
String sql = "select * from person where name=?";
PreparedStatement ps = conn.prepareStatement(sql);
ps.setObject(1, "robin");
ps.executeQuery();
i'm wants print Integrity sql.
For example:select * from person where name='robin'
How should I do?
thanks a lot!

PreparedStatement doesn't offer methods for that. You can write your own implementation of PreparedStatement which wraps the originating PreparedStatement and saves the set* values and writes it to the toString().
If needed, myself I just print the sql as well as the values-being-set to the debug statement.Logger.debug(query + " " + values);

My Andoid Devices wil not wake up my printer from Power Save Mode

I have an HP LaserJet Pro 200 color MFP M276nw istalled as a wireless network printer. I have various computers with XP and Windows 8 operating systems that wake up the printer from Power Save mode without problems. I also can print wirelessly from my Windows 8 phone. The problem arises when I try to print from my Android devices. I have installed the HP All-In-One Remote App from the Android Store and they seem to have installed correctly. They recognise the network printer, tell me that it is Power Save mode but are unable to wake it up. Can anyone help with this one please?
The Andoid version on the Tablet is 4.2.2
This question was solved.
View Solution.

Hello Jerends and thank you for your attention to my printer problem. My printer already has a fixed IP address so no need to go down that road. I managed to get around the problem by deleting the HP All in One App from my Android devices and replacing it with the HPePrint App. It's not perfect but does the job.
Thanks again.

Label Printing Using Address Book - How can I Print multiple labels of the same name?

Label Printing Using Address Book - How can I Print multiple labels of the same name?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

Wrong colors when printing PDF in Draft Mode Printing (Win)

I am using Acrobat to print my contact sheets from the Print module (Windows). If I use the "Draft Mode Printing" in LR, colors in the resulting PDF are way off. Any idea what the settings in Acrobat should be, to obtain correct colors? I have tried many combinations in the "Adobe PDF Conversion Settings", especially in the "Color" tab, but with no success.
Note that colors in the resulting PDF are correct instead when I disable the "Draft Mode Printing" from LR.

No I did not build 1:1 previews first. The point of using the draft print is to me to do quick, so would rather not build any 1:1 preview. Anyway, I don't believe I got what you wrote: if I do not build the 1:1 preview, what is the color space of the print output in Draft Mode?

Standard Smartform for label printing for packages - pls advice

Hi All,
I need help in changing a print program ie Standard Smartform for label printing for packages ?
Standard Driver program: SDPACKDR
Please provide me with the detailed steps for editing the Std Smartform according to any requirement.
Points will be rewarded promptly.
Thanks.

hi,
1. The smartform name is SD_PACK_ETIK.
2.Just copy the standard program into Zprogram and make chanes and assign in NACE with the form.
3.But,in smartform lable printing is not possible.
4.you can print barcodes.
Regards,
Kumar(Reward if helpful).

Primera LX 400 Label Printer No Longer Working with Mountain Lion

Hi-
I upgraded my OS to Mountain Lion and most everything works OK except my Primera LX400 label printer. The error message I get when trying to install the driver is "Software for this printer isn't available from Apple. Contact the printer's manufacturer for the latest software."
I contacted Primera but I haven't received an answer yet. Anyone else solve this problem with Mountain Lion and Primera Printers?
For those that depend on the Primera printers, you might want to wait before upgrading.

For those with the same problem, Primera says they will have new drivers up 7/31/12:
http://www.primera.com/primera_printer_drivers.html
I decided to check a day early (7/30/12) and the driver for my LX400 is up and I was able to install and use it successfully.

MSCA Label printing integration in Synchronous Mode

Similar Messages

Maybe you are looking for