MSCFNSCW Firm Checkbox for Purchase Requisitions Question

A customer upgraded from 11.0 to release 11.5 and uses internal purchase requisitions.
Currently, they can firm planned orders and they stay firm between plan runs; but the purchase requisitions appear in the Supply screen with the "firm" checkbox unchecked.
How can they get these requisitions created from the firm planned orders to appear in ASCP as firm internal requisitions?
See:
https://gtcr.oracle.com/gtcr-dir/gtcr_1740725641/6699499.993/SR_6699499.993_test_5122747.doc

Have you tried the profile option MRP: Firm Internal Req Transferred to OE

Similar Messages

Remove Firm indicator for Purchase Requisitions

Hi MM Gurus,
May I please know how to remove the firmed indicator (MDPS-FIX01) from a Manually changed MRP created PR.
I tried to unflag the fixed indicator in the PR but it does not do the trick. Are you able to please give me any ideas on this?
Thanks!
Jograd

any PR that is manually changed is automatically firmed.
As removing the firmed indicator is a manual activity, it would automatically result in firming when saving.
In short: it is not possible.
Delete the PR and run MRP again.

Budget Approver for Purchase Requisition

Hi,
In MM setup for purchase requisition, 4 levels has been setup for approving based on amount. The person who will approve is configured to be determined based on user exit (value - 9) in TCode OMGQ.
My question here is where is this user exit and how can we know to whom this PR will actually reach for approval.
Please help me out.
Regards,
Binay Agarwal

That you have to check in the Workflow settings based on the organization defined in PPOME
User exit M06B0001
you ca check the logic of user exit in SMOD
enter the above user eixt and display the component logic

ESOA: Enterprise Service for Purchase Requisition Query.

Hi,
I am not sure whether I am posting this question to the right forum, if not then please let me know the correct route.
I am trying to test the standard enterprise service for purchase requisition query response. It brings all the purchase requisitions even though they are deleted and not appearing in MD04.
Is there a way I can restrict and get only active purchase requistion. I am using the service PurchaseRequestItemByProductAndOrganisationalDataQueryResponse_In

Not Answered.

Release strategies for purchase requisitions

Hello,
I'm having trouble with profiles and roles for release strategies, this is the scenario:
-for purchase requisitions we have two approval levels, release code S1 and S2. When release code S1 is cleared, then S2 must be approved. The head of a certain purchasing group will use S1 to approve the requisitions from his own department, and then the financial director will approve with S2. However, finance is also a purchasing group, so in some instances the finance director will have to approve with S1 and then S2.
My question is: how can we use profiles and roles so that the finance director has access with S2 to all (*) purchasing groups, but with S1 for only a certain purchasing group (in this case "500")? we can't seem to be able to define certain purchasing groups to different release codes, purchasing groups must be defined at purchsing requisitiom level.
Many thanks
Daniel

HI,
Not necessarily, you just need a different strategy for each different combination of release codes involved.
So if certain P groups need to be put through a different sequence of approvals, then have one new strategy for this group of P groups and one for the other combination of P groups.
Or however many different variations you have.
Steve B

Release strategy for purchase requisition does not kick in

Hi Gurus!
I've been struggling with this issue for some weeks now.
I have set up the release strategy configuration for purchase requisitions with classifications.
However, if I create a purchase requisition the release functionality is not taken into account by the system.
See below some more information regarding my configuration:
1. I've created a new characteristic "REL_PR_GROUP". Status: released, Multiple values, Number of Chars 3, 7 values (TR1, TR2, TR3....TR7), Table name: CEBAN, Field name: EKGRP, Procedure for value assignment set to not ready for input.
2. I've created a new class: "REL_PR_ANPC". Class type 032, Status: released, Same classification: do not check, Char: "REL_PR_GROUP"
3. I have one release group "T1", Rel. object 1, OverReqRel is marked, Class: "REL_PR_ANPC"
4. I have 5 release codes. Grp: T1, Code: 01....05
5. I have 2 release indicators:
"R = Released", Rel. for ordering is marked, Changeabil: 4, Value chgs. 100,0
"X = Blocked", Changeabil: 4, Value chgs. 100,0
6. I have 1 release strategy:
"T1 with Grp T1"
- one release group, 01 Manager
- release prerequisites not applicable because of only one release group
- release status, nothing marked = blocked, 01 marked = released
- classification, purchasing group is TR1 or TR2 or TR3 or TR4 or TR5 or TR6 or TR7
I intentionally kept the configuration as simple as possible so I can try to get it working first.
Now if I create a purchase requisition for an item with release group T1, I would expect the release strategy to be activated. However, this is not the case. I don't see the "release status" tab in the PR, and if I try to relase via ME54 the system says the PR is not relevant for release.
Could you please assist in getting this working?

Hi,
Have you checked in CL30/CL30N if your release strategy is derived successfully?
See section 3 of Note 365604. A small section of it:
You can use transaction CL30 search for an object using the data
of the purchase requisition/purchase order. Here, it is important
that the object search determines exactly one strategy. If this
is not the case, this indicates that there are overlapping
strategies in the system or that the release strategies in
Customizing do not correspond with those from transaction CL24.
See the previous point. If the object search returns more than
one result, the system subsequently determines an incorrect
release strategy or no release strategy at all.
If it is derived successfully, next, check the user exit EXIT_SAPLEBND_001 as per Note 371667:
The following assignment statement has to exist within activated SAP
enhancements M06B0002 (include zxm06u13) and M06B0005 (include zxm06u31)
for purchase requisitions:
E_CEBAN = I_CEBAN.
Regards,
Purnima.

No selectable items exist for purchase requisition l_banfn

Hi,
While creating PO with ref to PR getting the below error :
no selectable items exist for purchase requisition l'banf .
Checked if the PO is created, its not created,.
checked if the item is blocked/cancelled/deleted. Nothing is set.
PR looks fine. Dont know if any authorization data is missing?

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

Table for Purchase Requisition Item Text

I would like to know, what is the table which stores the item text in tab texts for Purchase Requisition?

Hai,
the table is STXH.
CALL FUNCTION 'READ_TEXT'
      EXPORTING
CLIENT                        = SY-MANDT
        ID                            = IT_STXH-TDID "ID
        LANGUAGE                      = IT_STXH-TDSPRAS " LANGUAGE
        NAME                          = IT_STXH-TDNAME
        OBJECT                        = IT_STXH-TDOBJECT
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
      TABLES
        LINES                         = L_LINES
Regards,
Venkat

Regarding report for purchase requisition

Hi gurus,
      I am preparing a report for purchase requisitions using SQVI. I am almost done with it but I was stuck at one thing. Our client criteria is to see it by name like they wanted users to view only purchase requisitions they created. They dont want all users to see purchase requisition created by other users. I dont know how to do that. Can anyone help me out with that.
     let me know if I am not clear about anything.
Thanks in advance.
Ravi Teja Boppana

Hi,
      I added the field ERNAM from table EBAN. But the problem I am facing with it is any user can enter any user name in that field. Either I need that feild to be filled automatically with the username who logged in so that I can hide that field if that can be changed or filled automatically and cannot be change by user. Is there any option I can do like that. If I create a report in SQVI no one else except me can see that report, so I need this report in that manner.
      Let me know if i am not clear,
Thanks in advance,
Ravi Teja Boppana

Report - who is the current approver for purchase requisition

Hi Experts
Is there a report that can give information the status / who is the current approver for purchase requisition?
currently if we open the PR directly, we can only know the release strategy, release code, status of approver, but we cannot have the information who is the person that should approve this PR.
Thanks in advance
Prashanth.v

Hi All.
Unfortunately we want to have this information for our end user, and they will not have the access to SE16.
Another thinks is from CDHDR we will have the information if changes are made in PR. So it will give information user that already approve the PR
What we want to have is a report of outstanding PR (not yet released) that have information who is the user (the user complete name / user id) that should approve the PR.
Thanks In Advance
Prashanth.Venkategowda

Account assignement category for purchase requisition - error message

Hi All!
I created a new Item category in service order (IW31) "O" with the account assignment category "O". If I don't set the Consumption posting indicator to V for this category, when I set the account assignment category "O" to the purchase requisition in <i>Plant Maintenance and Customer Service-Maintenance and Service Processing-Maintenance and Service Orders-General Data-Define Account Assignment Category/Document Type for Purchase Requisitions</i>, I receive the message:
<b>"Acct. assign. cat. "O" for purchase req. does not exist.
Message no. CS 075"</b>
The client request is not to charge immediately for the goods receipt with the relevant costs the service order. The client wants to create the goods receipt in a storage location for the plant and then confirm the components and charge the costs after the component confirmation (movement type 261) - similar to stock material.
Any idea about what should I do?
Thank you.

Hi Everyone,
The problem is solved now. The cause was that the test requisition that I was making was satisfying more than one rules and hence I end dated the remaining rules which solved the problem.
Thanks!

SAP workflow for purchase requisition and purchase order

Hello Sap Workflow,
Can you please help me on building workflow for purchase requisition and purchase order with the necessary screen shots ?
your quick response will be greatly appreciated.
Thanks in Advance

Hi,
Please check http://help.sap.com .
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92761846f311d189470000e829fbbd/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92775546f311d189470000e829fbbd/frameset.htm
Configuration guides are available in SAP Solution Manager.
Regards,
Masa

FM for Purchase requisition status

Hi,
Is there any FM for Purchase requisition status.
Do let me know.
Regards,
SP

Hi,
Check this FM, hope this will solve ur problem.
'BAPI_ACC_PURCHASE_REQUI_CHEC'

AME for Purchase Requisitions

Hello All
I am in the process of setting up AME in R12.1.2 for purchase requisitions and got struck with an issue
My requirement is to route the requisition to a particular job based on the item category and the requisition total. I setup conditions, action types and approval groups and then the rule.
When I used static in my Approval Group setup it works fine with out issues however we do not want to use static as employees keep changing and want my approval driven out of the job hence updated the approval group to use Dynamic usage type and used the below query to pick the name of the employee based on the job.
select papf.full_name from per_all_assignments_f paaf, per_all_people_f papf, per_jobs pej where
paaf.person_id = papf.person_id
and sysdate between paaf.effective_start_date and paaf.effective_end_date
and paaf.job_id = pej.job_id
and pej.name like 'IT.Group IT Operations Manager.Staff'
Now when trying to create a requisition it shows up a message that "Approval List could not be generated. Please contact your System Administrator to review AME rules setup."
When validated the above query it says query is valid but still not working. I even tried with person_id but still no luck
Thanks a ton in advance
Regards
Dilip

Hi Dilip,
Pl. visit following links.
AME for iProcurement requisitions
Re: AME-Hierarchy Deciding Feature ?
HTH
Sanjay

BADI for Customer's own screen for Purchase Requisition.

Hi All,
I have a requirement where I need to create a BADI implementation for creating addition screens in the Purchase Requisition Transaction (ME51n/ME52n/ME53n).
I know there are User exits but we donu2019t want to implement them. Now in case of PO there is a standard SAP given BADI -> ME_GUI_PO_CUST for Customeru2019s own screen but as far as my understanding goes there are no such BADIs for Purchase Requisition.
Could anyone please advice if I can create a Custom BADI similar to ME_GUI_PO_CUST for PR for adding the screen and throw some light on it like how can this be achieved?
Thanks,
Ameesha

Thanks Darek for replying back and the BADI ME_BAPI_PR_CUST looks helpful but could you please help me in understanding how can i create my own custom screens within ME51N / ME52N / ME53N tcode using the BADI , ME_BAPI_PR_CUST.
For example in PO, we have the BADI ME_GUI_PO_CUST, with several methods like SUBSCRIBE and others which we can make use of for creating screen exits but what in the case of PR fpr BADI ME_BAPI_PR_CUST. i couldn't find any sample code for implementing this.
Any help is greatly appreciated.
Thanks,
Ameesha

MSCFNSCW Firm Checkbox for Purchase Requisitions Question

Similar Messages

Maybe you are looking for