MSCI planning transaction - planning data have not seen in the report

Dear expert,
We are updating the sales planning via transaction MC88. So my goal is to see the results in the reports MCSI, but I have not seen the planned quontity. I have only seen the Actuals.
Please help me how to set up the system in order to see planned data in the report.
Thanks in advance.
Best Regards,
Slavisa

Hi,
The report will say "No Data Available" only when the selection of variables doesn't match with the data exists in the InfoCube.
Or when the condition is activated with the setting wherein no data found in the Cube.
Apply the condition or variable selection for which the data exists in the backend(Cube).
Rgds,
Murali

Similar Messages

Siebel - BIP Issue: Data is not populating in the report

Hi Guru's
You have any idea why there's no output data in a section of the report? I generated the xml for a record from siebel and tested that with my updated template and it's working fine. All sections are populated. But when I tried to upload it in Siebel the template and the updated xlf (from generated xml) and run the report, one section of the report don't have populated data. It's pretty weird bip. In that section of the report that without populated data, this is the codes:
<?for-each:/SiebelMessage/ListOfBipPubHlsIncidentIo/PubHlsIncident/ListOfHs1IncidentContact/Hs1IncidentContact?><?sort:Household2;'ascending';date-type='number'?><?sort:Role;'ascending';date-type='text'?>.................<?end for-each?>
Need your thoughts.
Thanks,
JP
Edited by: BIPnewbie on Nov 18, 2011 3:06 AM
Edited by: BIPnewbie on Nov 18, 2011 3:06 AM

HI,
Give the same Selections in the list cube same as in Report and run see if there are any values coming in the Listcube.....If u r getting the values then you should get same in the Report....
Check with the authorizations to view the data....
Thanks/tarak

Plan Data Does Not Show in FI Report

I am using 6.0 with New GL and Functional Area standard Report S_PL0_86000029. I added cost center plan data using KP06 and that info shows fine in std report for cost centers (S_ALR_87013611), but does not appear in the aforementioned FI based report. Is there some transfer transaction I am missing?
Thanks
David

I resolved my problem by creating a new GRR1 report using the New GL (FAGLFLEXT) table. This report brings in all of the primary cost element postings as well as the secondary overhead postings. This provides a much more holistic view of FICO reporting. I used Functional Areas in order to break out the income statement into typical sections, including one for Net Order Consumption. This special section for orders should be zero if everything is settled to either WIP or variances. Otherwise I see a order related settlement problem on the face of the income statement. I found there was a slight problem with the secondary postings between the cost center and order. I used substitution rules to force the order postings to have one functional area while the cost centers provided the other side.
Once I haad the actual postings working, the next problem was that no plan data was coming to the report. I had to work through many details to finally get the plan data to come through, but now it works as designed.
Juggler

Credit Memos not seen in the Report

Hi all
My customer has a custom report which shows all the SD billed orders. The selection screens are Sales Doc# DocType, Industry Code, Material, Sold-to-party, Plant, Sales Order etc etc (all non Mandatory fields)
My problem is, any credit memos created with Order Type CR does not show up in the report. Can some one please tell me where this is controlled and how it can be made active?

Dear Madhu,
Get your custom report checked by your technical buddy (ABAP), if coding has been done to fetch data on CR order type.(Credit Memo request).
Also, if your Credit Memo billing Type is there in the output logic or not.
At the same time, get it checked from the User if this issue was there existing before or not.
Regards,
Vivek Sahni

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

Using ITunes Tutorials will not play. Using windows XP. All software up to date. I know others have had the same issue, however I have not seen a solution. I appreciate any advice.

iTunes Tutorials iwll not play. Using windows XP. All software up to date. I know others have had the same issue, however I have not seen a solution. I appreciate any advice.

I have traced the problem to a corrupted profile. When I captured the images in question, I also used Color Cherckr to create a profile for processing. When I apply that profile to the adjustments I make, I can no longer "Edit In". If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue. Something seems to have corrupted the new profile. I will re-create the profile and see if the issue is resolved.

I have migrated a user's mysite in sharepoint 2013 from one domain to another.The issue is that old activtiy data i.e newsfeed data is not seen

For eg :
I had a user called domain1\user1 whose mysite was created as http://my/personal/user1.
Now this user moves to another domain say domain2\user1.Since mysite is already present no new mysite will be created.
Move-SPUser –Identity "domain1\user1" –NewAlias "domain2\user1"After executing the above query,user is migrated and is able to login to the mysite.But the newsfeed data is not seen.I can see it in the microfeed list but not in the newsfeed page.All other data like documents ,tags,people etc is present
harsh damania

it should move all the profile data alonwith, i would check the ULS logs for any clue.
also make sure following timer jobs ran successfully
User Profile service application name - User Profile to SharePoint Quick Synchronization
User Profile service application name - Feed Cache Repopulation
User Profile service application name - Activity Feed Job
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Data of measure is not seen in webi report when drill is disabled

Hi
i have created a hierarchy in universe on which i drill down in webi reports
the problem is that i have drilled my report till the last level and saved it
the object on which im drilling is set as a section in the report
so i have added a measure in the table under that section
now the measure has different value at different level of drillings
i.e for the last level of the drill i use one measure and after that as i drill up i use different measure
for all other level of drilling
every thing is working fine but the problem is
when i open report in view mode
the measure data is not seen
only when i enable drill the measure data is seen
i have done something like thi
i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill level

Seems like DrillFilters needs the drillmode to work fine..
why don't save the report with the drill button enabled?

2 Lion Issues I have not seen addressed anywhere else.

I hope someone can help me here. I have a couple of problems with Lion that I have not seen mentioned anywhere. It's making me think that maybe I'm doing something wrong. Anyway here they are:
1) Folder dates not accurate: This one has actually really caused me a lot of pain. I have 2 machines running Lion. One at work and one at home. I often carry files from one to the other using my USB flash drive. As I am updating a lot of files each day, I had come to rely on the folder modify date to make sure that I don't miss some small file. And as far as I know, I never missed a file... until I installed Lion. Since then, I have noticed, on both machines, that the folder dates do not always get updated when a file within the folders is updated. For instance, I have a database file which gets updated every day, but I have to remember to copy it to the backup because the folder date has not changed in over a week. I have no idea what makes it change, when it does.
2) File transfers from Flash Drive unreliable: often when I am copying files FROM a USB drive TO my HDD (never happens in the opposite direction), the progress bar races along and finishes in a suspiciously quickly - (like in 1 second). To be honest, I've never checked at that point to see the status of the transfered files, but I know that it is impossible for them to have been transfered so quickly. I then drag and drop again. The second time it always progresses at a more expected pace and is always a successful transfer. It's never resulted in a problem for me, but it makes me feel a little insecure about the state of these transfers.
(I am running 2011 imacs and using Lion 10.7.3)
Thank you in advance for taking the time to ponder my issues.

OK - got me. I have used Macs for an embarrasingly long time and I have to say, up until now I had no idea that the folder mod date relied upon the creation/introduction of new material into the folder.
I have always relied on the modify date to help me sort out my files (when I am making changes to existing systems I often have a lot of copies of similar files/folders at different stages and for different media) -- it is difficult for me to believe that I never noticed that the directories did not get updated when existing files were updated... but hey - who knows... I'm doing a lot more, a lot quicker now. Perhaps I just had the time to be more careful before. Just goes to show you how great Macs are that someone can work as intimately as I do with them without knowing something that basic.
I did test your info by transferring a file into that directory, and, as you said the modify date of the folder did change.... so you're definitely right, but somehow I feel that something else is going on here because I can't see how it explains what happened with the sudden change in the folder modification dates, this morning.
At any rate, as you suggested, I will definitely have to modify my work habits.
Thanks again, baltwo, for clearing up most of the mystery.

The salesperson for my iphone 4 said on Christmas morning we could go to our online account, select my number, select to change my SIM card, and enter the ICCID number so that I'd be able to use my iphone 4 today. I have not seen any such steps. Help?

The salesperson for my iphone 4 said on Christmas morning we could go to our online account, select my number, select to change my SIM card, and enter the ICCID number so that I'd be able to use my iphone 4 today instead of my old phone (not an iphone). I have not seen any such steps. Help?

I suspect the salesperson that told you that meant your online account with your carrier...have you tried logging into your carrier account online? To do this will require the sim number on your sim card, as well as the phone's IMEI number...you get the sim number off the sim card & the IMEI number, for the phone, is printed on the box.

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

My daughter had completed a chart in pages. I saved it and then clicked on other chart types. Now I can't go back to the original chart she made even though I have not re-saved the file. How can I go back to her original chart with data?

I don't get what you are saying.
Is this all the same document?
What version of Pages?
Have you tried to revert to a previous version?
Peter

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the worl

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

Mac OS X 10.9.2 was released today for this issue and others. Earlier versions are not affected.
See this Apple article - http://support.apple.com/kb/HT6114
You can use the Mac app store to do the update or download it directly from here - http://support.apple.com/kb/DL1725
Best of luck.

HT6154 how to download the files from mail like gmail or yahoo or hotmail to my iphone 5s.I have not seen the option in my iphone 5s

how to download the files from mail like gmail or yahoo or hotmail to my iphone 5s.I have not seen the option in my iphone 5s

Download what files?
What is the actual problem that is occurring?

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I cal

My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?

Would be problems with purchases, billing, and redemption option. It's not 100% exact to your issue, but it will get you to the right department.
Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption. Then.. probably pick "My topic is not listed."

MSCI planning transaction - planning data have not seen in the report

Similar Messages

Maybe you are looking for