MSCS Cluster Installation
Hello Experts,
Can anybody help me configure the SAPGUI on the end user's system in a MSCS Cluster installation ?
I have Central Instance on Node 1 and Dialog Instance on Node 2 with SQL Server 2005 on Windows 2003 Enterprise Edition. The SQL and SAP cluster is working absolutely fine, but when there is a failover to Node 2, the user's connection to the server is getting disconnected
Please advice.
Edited by: The Fuhrer on Dec 18, 2008 5:45 AM
Hi kiran
use db2mscs.eee is the template and copy this to db2mscs.cfg.
and edit the file using page number 255.
Global section
DB2_INSTANCE = DB2<SID>
DB2_LOGON_USERNAME = domainname\db2<sid>
DB2_LOGON_PASSWORD = password
CLUSTER_NAME = clustername
MSCS Group for Node 0
GROUP_NAME = DB2 <DBSID> Group
DB2_NODE = 0
IP_NAME = DB2 IP <SID>
IP_ADDRESS=ipaddess of virtual db2 server
IP_SUBNET=subnet mask ipaddress
IP_NETWORK=Public LAN
NETNAME_NAME = DB2 NetName <SID>
NETNAME_VALUE = hostname of virtual db2 server
NETNAME_DEPENDENCY = DB2 IP <SID>
DISK_NAME = Disk L: these 3 are the shared disks
DISK_NAME = Disk M:
DISK_NAME = Disk N:
INSTPROF_DISK = Disk L:
#TARGET_DRVMAP_DISK = Disk M:
MSCS Group for Node 1
#GROUP_NAME = DB2 Node 1
#DB2_NODE = 1
#IP_NAME = IP Address for Node 1
IP_ADDRESS=9.26.118.252
IP_SUBNET=255.255.255.0
IP_NETWORK=Ethernet(2)
#NETNAME_NAME = Network Name for Node 1
NETNAME_VALUE = DB2SRV1
NETNAME_DEPENDENCY = IP Address for Node 1
#DISK_NAME = Disk O:
#TARGET_DRVMAP_DISK = Disk O:
please follow the isntallation doc it has given very clearly. page number 254.
if u need any further guidence i will.
Kiran have u finshed the installation
Regards
Rao .
Edited by: Rao on Jun 22, 2009 12:44 PM
Similar Messages
-
MSCS cluster installation on win + sql server 2005
Dear Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisit & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarni
Message was edited by:
amol kulkarniHi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier -
Installing MSCS cluster installation
HI Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisite & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarniHi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier -
Hello,
We have installed production on MSCS cluster.Installation is finished successfully.Cluster resources for ASCS and SCS instance in sapgroup
are not getting failover.If we take SCS instance resource offline and try to failover ascs instance resource manually,it doesnot work out first time.But 2nd time it worked out.Also,with same status if we restart one node,ASCS instance resource doesnt come online.
We tried out many things without success.Plz help ASAP.
Regards,
shitalHi,
MSCS needs a lot of steps to configure correctly.
First try out with one or two physical disk resources if they are completely failover. then try SAP resources.
I have two nodes (Active and Passive), Active acts as Database instance (mssql), and passive acts as dialog instance (R/3). When passive has problems and shuts off, then the active node takes over the passive resource (R/3) and acts as a central instance. After the passive comes back online, then you have to move the R/3 resource from the active node to the passive manually, not automatically.
Please let me know if you still have problems.
Regards. -
Java Add-In installation on a existing ABAP System (MSCS Cluster)
Hi all
we try to install a Java Add-In for a already existing ABAP System with
SAPinst. The ABAP System is a NetWeaver2004s SR1 System in a MSCS Cluster.
We have the Problem that we can´t choose the Installation Drive during
the SAPInst Define Parameter Step during the "Central Services Instance (SCS) Java Add-In" Installation.
But in the Installation Manual for
NW2004s Java AS in Chapter 4.3.2 is stated:
"Caution: You must install it on the same shared disk as the ASCS instance."
If I run the Installation, the SCS will be installed on the local disk E:
beside the Central Instance. But it need to be on the shared Disk P:
beside the ASCS installation. How can I control this?
Stefanobviously the network share saploc is existing in your system an pointing to a local device.
Delete the local saploc share, install SCS instance, run MSCS first node, additional node, create the local share saploc again (don't forget to set permissions on the share, the default permission did only allow Read vor Everyone) and proceed with installation.
There is a note in creation for this issue.
peter -
PI 7.1 Installation on MSCS Cluster
Hi Sapers,
I'm In the middle of Installation of PI 7.1 on MSCS Cluster
My Problem is while Installing In Node A I have chosen for Host Agent and SAPOSCOL a Shared Drive(G:) which
Should actually be a Local Drive(C , But In Node B I have Chosen Local Drive (C
Now My question
1) Can I change the path In the Registry, If yes can anyone tell me the procedure and
2) What would be the implications or Consequences?
3) Will My Installation Go Successfully
Thanks In Advance
GHKInstallation of SAPOSCOL on a different logical partion within the same local host is fine, obviously not on a different host as the SAPOSCOL is the operating system collector for the host on which it is installed.
Regards. -
Cluster Installation - SQL 2005 / 2003 - Creating cluster group
Hi All,
I am working on the cluster Installation in our environment and facing some issues at the time of installing first node MSCS Installation. let me summarize the activities done so far
Environment Details
Physical Disk :
G: (Physical Disk - SAN )
I : (Physical Disk - SAN )
C: Local disk
Q: (Physical Disk Quorum - SAN )
F: (Database and logs)
-- > SCS installed locally in the server in G drive
Virtual Hostname and IP : SeparateIP & cluster1
Node 1: Hostname and separate IP
Node 2 : hostname and Separate IP
Installed MSCS service and tested the same - its working fine
Installed SQL 2005 database in cluster mode and its working fine
Started installing SAP
Step 1: Installation of SCS instance in node A (Used F drive) - Successfull Installed
Step 2: Installation of First node MSCS in node A
Here I am facing an issue, in the end phase of the installation it will ask for creating cluster group -- > There I need to define the Global disk as F (Which is defined at the time of installing SCS instance) - But i dont see that disk is available in the drop down box .
Is there any other workaround to bring the Global disk while creating the cluster group (First node MSCS installation)
Looking forward for your suggestions
Thanks and Regards
VijayRegret for the late update
112266 solved my problem and In my case, I have bisected the disk as two but in the cluster environment that should not be the case. Ensure the the same in disk management
Regards
Vijay -
Multiple SAP Systems In One MSCS Cluster
We have installed a NW 7.0 EHP abap stack in a MSCS Cluster with 2 nodes.
This was installed as a standard Cluster Install.
We have now higlighted a requirement to install a 2nd (Java ) instance in this Cluster Group.
The NW 7.0 EHP1 documentation and Note 1321854 shows that multiple SAP systems in one MSCS cluster is supported.
The documentation, however, is not clear if the 2nd instance can be installed when the 1st instance was installed without the preperations for Multiple Systems.
There are no further documentation or guidelines to help.
Has anyone come across this situation or managed to install 2 SAP instances in one Cluster Group based on Windows 2003, SQL Server 2005.
RegardsI am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias -
OFFLINE backup and DB13 jobs configuratins error in MSCS cluster with OFS
Hello,
We have recently installed SAP ERP 6.0 EhP4 SR1 in MSCS cluster using Oracle Fail Safe.
The installation is successful and all the failover scenarios work fine.
I need to schedule offline backups and DB13 jobs, which is not possible in current scenario as once the database shuts down it fails over to node2.
I am following sapnote 657999 to install standalone gateway on both the nodes of the cluster and assigned the service to ORACLE<SID> group. the gw<SID> is different from the ERP<SID>.
However, the service SAP<gwSID>_<gwSN> fail to come up with the following error.
The service SAPSGA_30 cannot be started on local computer
error 1067: the process terminated unexpectedly.
The ../SapCluster/sapgw and associated directories have full permission.
Following are the contents of the profiles in ../SapCluster/sapgw
default.pfl
SAPDBHOST = ORACLEPRD
gw30.pfl
SAPSYSTEMNAME = SGA
INSTANCE_NAME = GW30
SAPSYSTEM = 30
DIR_PROFILE=C:\WINDOWS\SapCluster\sapgw
DIR_EXECUTABLE=C:\WINDOWS\SapCluster\sapgw
DIR_INSTANCE=C:\WINDOWS\SapCluster\sapgw
SAPLOCALHOST = ORACLEPRD
SAPLOCALHOSTFULL = ORACLEPRD
startgw.pfl
SAPSYSTEMNAME = SGA
INSTANCE_NAME = GW30
SAPSYSTEM = 30
DIR_EXECUTABLE = C:\WINDOWS\SapCluster\sapgw
DIR_PROFILE = C:\WINDOWS\SapCluster\sapgw
DIR_INSTANCE = C:\WINDOWS\SapCluster\sapgw
_GW=gwrd.exe
Start_Program_00 = local $(DIR_EXECUTABLE)\$(_GW) pf=$(DIR_PROFILE)\gw30.pfl
Now as the service is a part of my ORACLE<ERP SID> group, everytime I try to bring the group online, it fails due to the gw service and toggles many times in the two nodes before coming to rest on one node withfailed gw service and database in the up condition.
Any insight in this regard will be really helpful.
Thanks
NischalHello,
Yes we were able to configure offline backups.
We opted to install standalone gateway on both nodes and added it to the DB group. That provides the essential shell console.
You need to follow the SAP Note 657999 and then 378648 for setting the necessary environment variables.
One piece of advice, use the SID and system no. for the independent gateway, different from any of your SAP installations.
Thanks
Nischal -
Hello,
I would like to install SAP ECC6 EhP4 from System Copy (backup/restore) in Windows failover cluster environnement with two nodes.
So, I have installed MSSQL Server 2008R2 SP2 in cluster mode (using virtual host : FRSERVERSQL).
Now, I have to install SAP ECC. (A virtual host has been created : FRSERVERSAP)
I have created manually SAP SID service on "Failover cluster manager" windows menu.
Inside this service, I have created :
- IP resource
- Shared folder (sapmnt : E:\usr\sap)
- Disque resource (E:)
I have created saploc shared folder (c:\usr\sap)
Following install guide and some SCN threads, I have doubt with the way to install SAP in Windows failover cluster environnement.
I found this way on SCN :
1. Central services instance for ABAP installation.
Use the command line sapinst.exe SAPINST_USE_HOSTNAME=FRSERVERSAP
Note - during the installation time all the cluster resource should be in Node 1
2 First MSCS node installation => on Node I? Do I need to use SAPINST_USE_HOSTNAME=FRSERVERSAP ???
3 Database Instance Installation => Do I need to use SAPINST_USE_HOSTNAME? If yes, do I use FRSERVERSQL???
4 Additional or Second MSCS node installation => on Node II? with SAPINST_USE_HOSTNAME?
5 Enqueue replication server installation for ABAP in Node I
6 Enqueue replication server installation for ABAP in Node II
7 Central Instance Installation in Node I
8 Dialog Instance Installation in Node II
9 Post processing steps after system copy
One more question.
After installation is OK, If I have to refreh this environnement (with homogenous sytem copy - backup/restore),
which option should I have to use after restore? Only Database instance installation or all options described above?
Thanks for your help
RegardsHi Durecu
I will follow the steps mentioned but my question is about options to user with sapinst.exe?
When should I have to usr SAPINST_USE_HOSTNAME?
1. Central services instance for ABAP installation.
Use the command line sapinst.exe SAPINST_USE_HOSTNAME=FRSERVERSAP
Note - during the installation time all the cluster resource should be in Node 1
During the time of Central service instance for ABAP & JAVA you have to use the Virtual hosts (that is on MSCS SAP Group DNS name, & Cluster disk before that you have to create in MSCS)
Syntax " SAPINST.EXE SAPINST_USE_HOSTNAME=<*Virtual Host Name*> "
2 First MSCS node installation => on Node I? Do I need to use SAPINST_USE_HOSTNAME=FRSERVERSAP ???
Normal SAPINST.exe Without virtual name
3 Database Instance Installation => Do I need to use SAPINST_USE_HOSTNAME? If yes, do I use FRSERVERSQL???
Normal SAPINST.exe Without virtual name
4 Additional or Second MSCS node installation => on Node II? with SAPINST_USE_HOSTNAME?
Normal SAPINST.exe Without virtual name
Regards
Sriram -
Failover cluster installation - BO server
Hi,
I have two BO servers and I have to configure them in failover mode.
If the principal fail, the second one works.
Does anyone try to do it before?
Thanks,
JulioHi Durecu
I will follow the steps mentioned but my question is about options to user with sapinst.exe?
When should I have to usr SAPINST_USE_HOSTNAME?
1. Central services instance for ABAP installation.
Use the command line sapinst.exe SAPINST_USE_HOSTNAME=FRSERVERSAP
Note - during the installation time all the cluster resource should be in Node 1
During the time of Central service instance for ABAP & JAVA you have to use the Virtual hosts (that is on MSCS SAP Group DNS name, & Cluster disk before that you have to create in MSCS)
Syntax " SAPINST.EXE SAPINST_USE_HOSTNAME=<*Virtual Host Name*> "
2 First MSCS node installation => on Node I? Do I need to use SAPINST_USE_HOSTNAME=FRSERVERSAP ???
Normal SAPINST.exe Without virtual name
3 Database Instance Installation => Do I need to use SAPINST_USE_HOSTNAME? If yes, do I use FRSERVERSQL???
Normal SAPINST.exe Without virtual name
4 Additional or Second MSCS node installation => on Node II? with SAPINST_USE_HOSTNAME?
Normal SAPINST.exe Without virtual name
Regards
Sriram -
Best plan to MSCS cluster NW700
Gurus:
We have a sandbox NW700 as a POC for MSCS cluster.
We do not care about hardware with enough funds.
We want a full MSCS clustered CI, DI , SCS , ERS and DB, therefore each part is HA.
We also plan a webdispatcher in front of the NW700 and will not be clustered.
Could you please give some high level recommendation to achieve above HA?
Thanks!Hi,
Yes, you can install MSCS cluster. You need to be having 2 nodes. CI and DI will be local on both the nodes. ASCS and DB will be installed on virtual hostname and directory will be moving across 2 nodes. ERS will be installed on both nodes locally.
You can read the installation guide for more information.
Thanks
Sunny -
Hi,
Could any one please clarify my doubts below.
We are planning to build new cluster environments with two nodes as below:
1. One database node(11.1.0.7)
2. Two application nodes which includes weblogic, SOA, BAM etc(this is a cluster)
3. AIA11g in SOA
I would like to know for the above installations how many load balancers do i need and is there any exact document for cluster installation which i can follow.
Regards,
Baji.Hi Vijay,
What OS are you talking about? If you mean MSCS, then the appropriate steps are in the Installation Guide. For other clustering technologies, documentation needs to be obtained from the vendor.
Best Regards,
Matt -
Hi ,
We are going to install ERP ehp5 on windows machine with clustered installation ( fail over). I have a doubt on disk partitions.
Database : DB2 9.7 FP3
OS : 2008 SERVER
Configuration : We are using 2 nodes each node avialabe system attached hard disk 145 gb
DISK Space available in SAN 1200 gb
How to partition for cluster installation on the above configuration.
Thanks,
SivaDear Siva.
You will find a clear explanation on this in chapter 8 of the installation guide specific for your SAP release and platform (chapter "High Availability with Microsoft Cluster Service" ).
In particular, for the "SAP NetWeaver 7.0 ABAP+Java including Enhancement Package 2 on Windows: IBM DB2 for Linux, UNIX, and Windows" installation guide, you will find the response in section 8.2.2: "Distribution of SAP System Components to Disks for MSCS" ( page 164 of the guide).
Cheers!
--Jesú -
SMD database monitoring for Java MSCS cluster system
Dear All,
We have install SAP netweaver 7.0 EHP1 java stack on oracle 10.2.0.5 with windows 2008 R2 MSCS cluster enviornmant.
now we are configuring SMD
From SMD, while configuring Managed system(JAVA ONLY system)--> database monitoring I am getting following error
DB connection Id :%_SID_virtualhost_SAPSR3DB
Connectivity test :
Database history :This connection could not be tested, thus the DB performance warehouse was not set up
Extractors activation :This connection could not be tested, thus the DB extractors were not set up
Connectivity test details :
Database connection %_SID_virtualhost_SAPSR3DB : SQL error 12505 ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
Database connection :%_SID_virtualhost_SAPSR3DB could not be established
System Details
Solman - SAP EHP 1 for SAP Solution Manager 7.0
managed system - Netweaver 7.0 ehp1AS JAVA(New Installation)
Connection parameters
Database Name: SID
Database Host :virtual host
TNS Name:SID.WORLD
User Name:SAPSR3DB
Password:xxxxxxxxxxx
Tns ping command is also not working when we give host name as virtual host of JAVA system
but when we change it to phyiscal IP address of the cluster server it is working fine.
Could you please let me know any setting need to be done
Sincerely
PareshHi Paresh,
>> Tns ping command is also not working when we give host name as virtual host of JAVA system
but when we change it to phyiscal IP address of the cluster server it is working fine.
>> SQL error 12505 ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
Virtual hostname must be resolved on both hosts while configuring SMD. Otherwise you'll not able to access Oracle Listener.
Best regards,
Orkun Gedik
Maybe you are looking for
-
Formula is not working in report
Hi Friends, This is formula iam using in report.but in output iam getting only value 1. Iam not getting other values. I think my OR condition is not working. ( ( ( ( ( 'KF1' < 0.1000 ) * 1 OR ( ( 'KF1' >= 0.1000 ) AND ( 'KF1' < 0.1200 ) ) * 2 ) OR (
-
How can I append multiple parts to NetStream with appendBytes
Hi, I hope someone can help me. Problem: I load a flv file with the FileReference class. After that I append a part of the ByteArray to the NetStream with appendBytes. Later I want a next part append to the NetStream. It doesn't work. Is that possi
-
I want to upgrade my iphone and want to make sure that all my phone and email contacts get transfered along with my photos, videos and music to new phone. How do I go about doing that?
-
Substitution for MIRO Business Area for tax line items
Hi All, Our business requirement is updation of BA in tax line items during MIRO transaction. To fulfill this requirement i have written a substitution with user exit. Business user enters BA in bktxt . In user exit iam passing bktxt field to bseg-gs
-
How do I make a button activate when enter is pressed?
Can anyone help me? I'm trying to activate the JButton "BUTconv" below work when someone presses "enter" on the keyboard. I'm using the code below, but every time I try to compile it, my compiler says that "BUTconv" is an unknown symbol, it 'cannot f