MSCS cluster + oracle + ERP2005 Sr2

Dear All
The below cmd i am not able to execute an Cluster system.
On all MSCS nodes, copy the BR*Tools to the local windows\sapcluster directory with the
following command:
sapcpe.exe source:<path_to_platform_directory>
target:<path_to_%windir%\sapcluster_directory> list:dbatoolsora.lst
regards

refer Note 1437469 - FS-10658 during Oracle Failsafe Cluster verification

Similar Messages

Oracle DB upgrade from 10.2.0.2 to 10.2.4.0 under MSCS cluster

Hi,
How to upgrade the database from 10.2.0.2 to 10.2.4.0 under MSCS cluster environment.
We are in the process of upgrading the Oracle from 10.2.0.2 to
10.2.0.4.
( 10g Relese 2 (10.2.0.4) patchset 3 for Microsoft Windows X64 -
p6810189_10204_MSWIN-x86-64 )
As per the readme.txt, we have stoped all the oracle services. We could
not stop listner - OracleP01102TNSListenerFSLoracleP01. We got the
error listner ( OracleP01102TNSListenerFSLoracleP01) need to be
shutdown. We tried to stop it, but, automatically it was restarting.
We disable it and continued the upgradation. All the oracle resources
moved to Node-2 and we got the second error ( (oracle_home)/database )
device is not ready.
Early reply is highly appreciated..
Thanks!
Nikhil

Hi ,
Shutdown Database (use sqlplus) and then try to stop all oracle services.
Check with your OS team for - All the oracle resources
moved to Node-2 and we got the second error ( (oracle_home)/database )
device is not ready.
Normally it should not be happened .
If node 1 is down , on that time node 1 all the oracle resoures moved to Node -2 .
Pls contact OS team.

Multiple SAP systems in MSCS with Oracle

Hello,
We are going to install a BI instance in a MSCS cluster in which there is already a SAP system installed and clustered.
The SO is Windows 2008 and Oracle 10.2.0.4.
My problem is about the Oracle sw. In previous SAP releases there was a guide called "Installation of Multiple SAP systems in MSCS: Oracle".
For my release Netweaver 7.0. EHP1 SR1, there is no specific guide. All the references are the installation guide and part related to MSCS installation and a white paper about "new configuration of multiple SAP systems with Windows 2008 Failover Clustering".
In all that documents I haven't found what to do with the database. In the beginning of the installation documents says that Multiple Oracle_home for different database instances are not supported in an MSCS configuration. But in the pages related to the MSCS installation says "if required, set up multiple Oracle Homes".
So, what's the option? Multiple Oracle_homes or MCOD? Be in mind that I already have a SAP system in this cluster, so I already have an Oracle home c:\oracle\<SID>\102
Have you work in this scenario?
Thanks and best regards,
Ana.

Hi,
Officially SAP does not support Multiple SAP Systems in One MCSC Cluster. If such installation & configuration has been done by SAP Global Technology Partner then and then only SAP provide support.
what's the option? Multiple Oracle_homes or MCOD?
GO for multiple oracle_home , in which the same drive letter for oracle_home should be used on local disks in both MCSC cluster nodes. And the same oracle_home should be junctioned to the shared location on shared space.
The Chapter 7 High Availability with Microsoft Cluster Service of [Inst. Guide SAP NetWeaver 7.0 incl. EHP1 SR1|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000659894&_OBJECT=011000358700000353072009E] contains all the required information with detail. Refer it.
Regards,
Bhavik G. Shroff

OFFLINE backup and DB13 jobs configuratins error in MSCS cluster with OFS

Hello,
We have recently installed SAP ERP 6.0 EhP4 SR1 in MSCS cluster using Oracle Fail Safe.
The installation is successful and all the failover scenarios work fine.
I need to schedule offline backups and DB13 jobs, which is not possible in current scenario as once the database shuts down it fails over to node2.
I am following sapnote 657999 to install standalone gateway on both the nodes of the cluster and assigned the service to ORACLE<SID> group. the gw<SID> is different from the ERP<SID>.
However, the service SAP<gwSID>_<gwSN> fail to come up with the following error.
The service SAPSGA_30 cannot be started on local computer
error 1067: the process terminated unexpectedly.
The ../SapCluster/sapgw and associated directories have full permission.
Following are the contents of the profiles in ../SapCluster/sapgw
default.pfl
SAPDBHOST = ORACLEPRD
gw30.pfl
SAPSYSTEMNAME = SGA
INSTANCE_NAME = GW30
SAPSYSTEM = 30
DIR_PROFILE=C:\WINDOWS\SapCluster\sapgw
DIR_EXECUTABLE=C:\WINDOWS\SapCluster\sapgw
DIR_INSTANCE=C:\WINDOWS\SapCluster\sapgw
SAPLOCALHOST = ORACLEPRD
SAPLOCALHOSTFULL = ORACLEPRD
startgw.pfl
SAPSYSTEMNAME = SGA
INSTANCE_NAME = GW30
SAPSYSTEM = 30
DIR_EXECUTABLE = C:\WINDOWS\SapCluster\sapgw
DIR_PROFILE = C:\WINDOWS\SapCluster\sapgw
DIR_INSTANCE = C:\WINDOWS\SapCluster\sapgw
_GW=gwrd.exe
Start_Program_00 = local $(DIR_EXECUTABLE)\$(_GW) pf=$(DIR_PROFILE)\gw30.pfl
Now as the service is a part of my ORACLE<ERP SID> group, everytime I try to bring the group online, it fails due to the gw service and toggles many times in the two nodes before coming to rest on one node withfailed gw service and database in the up condition.
Any insight in this regard will be really helpful.
Thanks
Nischal

Hello,
Yes we were able to configure offline backups.
We opted to install standalone gateway on both nodes and added it to the DB group. That provides the essential shell console.
You need to follow the SAP Note 657999 and then 378648 for setting the necessary environment variables.
One piece of advice, use the SID and system no. for the independent gateway, different from any of your SAP installations.
Thanks
Nischal

Sap uninstalltion in mscs cluster

Dear All,
Can any one help me in uninstalling the sap in mscs cluster environment
windows 2003 sp2
netweaver 2004s
oracle 10g
2 node cluster
<b>
I have tried the following to resolve the issue without success
1.tried from sapinst
2.tried uninstalling it from run box with virtual host name</b>
The below is the error message i get when im trying to uninstall the system
WARNING 2007-10-31 17:08:58
Connect to message server (sapxpi/3900) failed: NIECONN_REFUSED.
INFO 2007-10-31 17:08:58
Execute step removeJavaInstancesFromDB of component |NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_Instance_Uninstall|ind|ind|ind|ind|2|0.
INFO 2007-10-31 17:08:58
Execute step runCleanIPC of component |NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_Instance_Uninstall|ind|ind|ind|ind|2|0.
ERROR 2007-10-31 17:08:58
FJS-00003 TypeError: instance has no properties (in script NW_Uninstall|ind|ind|ind|ind, line 90104: ???)
ERROR 2007-10-31 17:08:58
FCO-00011 The step runCleanIPC with step key |NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_Instance_Uninstall|ind|ind|ind|ind|2|0|runCleanIPC was executed with status ERROR .
INFO 2007-10-31 17:09:14
An error occured and the user decided to retry the current step: "|NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_Instance_Uninstall|ind|ind|ind|ind|2|0|runCleanIPC".
ERROR 2007-10-31 17:09:15
FJS-00003 TypeError: instance has no properties (in script NW_Uninstall|ind|ind|ind|ind, line 90104: ???)
ERROR 2007-10-31 17:09:15
FCO-00011 The step runCleanIPC with step key |NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_Instance_Uninstall|ind|ind|ind|ind|2|0|runCleanIPC was executed with status ERROR .
INFO 2007-10-31 17:09:21
An error occured and the user decide to stop.\n Current step "|NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_Instance_Uninstall|ind|ind|ind|ind|2|0|runCleanIPC".

Hello,
I encountered the similar situation & got good result following Mr.Camilo Lopez de Felipe.
The command to start SAPinst was
sapints.exe SAPINST_USE_HOSTNAME=<virtual hostname for SAP>
Thank you very much.
Error Massage
INFO 2009-08-28 16:47:52
Execute step runCleanIPC of component |NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_Instance_Uninstall|ind|ind|ind|ind|2|0.
ERROR 2009-08-28 16:47:52
FJS-00003 TypeError: instance has no properties (in script NW_Uninstall|ind|ind|ind|ind, line 90104: ???)
ERROR 2009-08-28 16:47:53
FCO-00011 The step runCleanIPC with step key |NW_Uninstall|ind|ind|ind|ind|0|0|NW_System_Uninstall|ind|ind|ind|ind|3|0|NW_Instance_Uninstall|ind|ind|ind|ind|2|0|runCleanIPC was executed with status ERROR .
Edited by: Kaoru Takahata on Aug 28, 2009 12:02 PM

Oracle FailSafe on Windows Cluster - Oracle Service Question

I'm running DB10G R2 on a 2 node Windows 2003 Server cluster.
I have configured Oracle FailSafe and the failover 'appears' to be working correctly but I'm confused as to what/how the DB service works.
When I switch between nodes the OracleService<SID> remains at Started on the node I'm switching from, the service on the newly 'active' node never starts. Is this expected behaviour?
The database is accessible from the clients but I'm guessing (am unable to test/prove) that if I power down node1 it won't be.

Why can't you test/prove what happens when you power down node1? A critical part of every cluster implementation should be to perform failure testing.
It's been a while since I've worked with Failsafe, but I do remember that all management is performed through the cluster manager application (can't remember what it is called exactly--the MSCS cluster admin tool). You shouldn't have to worry about the services. You should be able to relocate the database, it's storage (drives) and its associated IP address to the other cluster node and verify via the MSCS app that all services are running on that other node. At that point, the original node (node1 in this case) can be powered off, rolled out of the building, whatever you want--database should remain available on node2.
Dan

Failed for installing SAP ERP2005 SR2

Hello Expert,
i am facing a problem with installing ERP2005 SR2 in WIndows 2003 Server 32bit with Chinese OS.
the step of create database in installing SAP is failed.
i pasted the log, who please kindly help me to find out what's the exactly reason.
thanks in advace
><<<<<<<<<<<<<<<<<<<<<<
Dump file f:\oracle\e60\saptrace\usertrace\e60_ora_3628.trc
Wed Jan 09 13:17:03 2019
ORACLE V10.2.0.2.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 8 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:15459M/16381M, Ph+PgF:16083M/18176M, VA:467M/2047M
Instance name: e60
Redo thread mounted by this instance: 0 <none>
Oracle process number: 13
Windows thread id: 3628, image: ORACLE.EXE (SHAD)
SERVICE NAME:() 2019-01-09 13:17:03.671
SESSION ID:(85.3) 2019-01-09 13:17:03.671
ORA-00200: control file could not be created
ORA-00202: control file: 'F:\ORACLE\E60\ORIGLOGA\CNTRL\CNTLRE60.DBF'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) 系统找不到指定的路径。
Thanks again
Kevin Gao

Hello Rajesh,
i did as you said to assign user E60ADM and SAPserviceE60 to adminstrator group.
but i can't find the user ORAE60.
please let me describe the error message .
now i execute the 'startup' command to start oracle, system will altert the log
'ORA-00205: error in identifying control file, check alert log for more info'
and i also reviewd the sap installation log file , same log exists.
Sat Jan 12 10:02:17 2019
Errors in file f:\oracle\e60\saptrace\usertrace\e60_ora_2044.trc:
ORA-00200: control file could not be created
ORA-00202: control file: 'F:\ORACLE\E60\ORIGLOGA\CNTRL\CNTLRE60.DBF'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) system can't find pathu3002
Sat Jan 12 10:02:17 2019
ORA-1501 signalled during: CREATE DATABASE E60 CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE 'F:\oracle\E60\sapdata1\system_1\system.data1' SIZE 1000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE 'F:\oracle\E60\sapdata1\temp_1\temp.data1' SIZE 2000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE 'F:\oracle\E60\sapdata1\undo_1\undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE 'F:\oracle\E60\sapdata1\sysaux_1\sysaux.data1' SIZE 200M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('D:\oracle\E60/origlogA/log_g11m1.dbf',
'C:\oracle\E60/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('D:\oracle\E60/origlogB/log_g12m1.dbf',
'C:\oracle\E60/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('D:\oracle\E60/origlogA/log_g13m1.dbf',
'C:\oracle\E60/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('D:\oracle\E60/origlogB/log_g14m1.dbf',
'C:\oracle\E60/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
actually the file should be created when installing SAP automatically rather than manually.
the machine hardware is Windows 2003 Server 32bit, and RAM 16G , Hard Disk 1TB disk array.
i changed the "db_cache_size= 177371824" and "sga_max_size=177371824" parameter in INITE60.ora
it likes OS error. but this is my first installation experince, who would help to find out what 's exactly reason
thanks
Kevin
Edited by: nakashima1 on Jan 12, 2010 3:14 AM
Edited by: nakashima1 on Jan 12, 2010 3:19 AM
Edited by: nakashima1 on Jan 12, 2010 3:26 AM
Edited by: nakashima1 on Jan 12, 2010 3:33 AM
Edited by: nakashima1 on Jan 12, 2010 3:34 AM

SMD database monitoring for Java MSCS cluster system

Dear All,
We have install SAP netweaver 7.0 EHP1 java stack on oracle 10.2.0.5 with windows 2008 R2 MSCS cluster enviornmant.
now we are configuring SMD
From SMD, while configuring Managed system(JAVA ONLY system)--> database monitoring I am getting following error
DB connection Id :%_SID_virtualhost_SAPSR3DB
Connectivity test :
Database history :This connection could not be tested, thus the DB performance warehouse was not set up
Extractors activation :This connection could not be tested, thus the DB extractors were not set up
Connectivity test details :
Database connection %_SID_virtualhost_SAPSR3DB : SQL error 12505 ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
Database connection :%_SID_virtualhost_SAPSR3DB could not be established
System Details
Solman - SAP EHP 1 for SAP Solution Manager 7.0
managed system - Netweaver 7.0 ehp1AS JAVA(New Installation)
Connection parameters
Database Name: SID
Database Host :virtual host
TNS Name:SID.WORLD
User Name:SAPSR3DB
Password:xxxxxxxxxxx
Tns ping command is also not working when we give host name as virtual host of JAVA system
but when we change it to phyiscal IP address of the cluster server it is working fine.
Could you please let me know any setting need to be done
Sincerely
Paresh

Hi Paresh,
>> Tns ping command is also not working when we give host name as virtual host of JAVA system
but when we change it to phyiscal IP address of the cluster server it is working fine.
>> SQL error 12505 ORA-12505: TNS:listener does not currently know of SID given in connect descriptor
Virtual hostname must be resolved on both hosts while configuring SMD. Otherwise you'll not able to access Oracle Listener.
Best regards,
Orkun Gedik

Multiple SAP Systems In One MSCS Cluster

We have installed a NW 7.0 EHP abap stack in a MSCS Cluster with 2 nodes.
This was installed as a standard Cluster Install.
We have now higlighted a requirement to install a 2nd (Java ) instance in this Cluster Group.
The NW 7.0 EHP1 documentation and Note 1321854 shows that multiple SAP systems in one MSCS cluster is supported.
The documentation, however, is not clear if the 2nd instance can be installed when the 1st instance was installed without the preperations for Multiple Systems.
There are no further documentation or guidelines to help.
Has anyone come across this situation or managed to install 2 SAP instances in one Cluster Group based on Windows 2003, SQL Server 2005.
Regards

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

Java Add-In installation on a existing ABAP System (MSCS Cluster)

Hi all
we try to install a Java Add-In for a already existing ABAP System with
SAPinst. The ABAP System is a NetWeaver2004s SR1 System in a MSCS Cluster.
We have the Problem that we can´t choose the Installation Drive during
the SAPInst Define Parameter Step during the "Central Services Instance (SCS) Java Add-In" Installation.
But in the Installation Manual for
NW2004s Java AS in Chapter 4.3.2 is stated:
"Caution: You must install it on the same shared disk as the ASCS instance."
If I run the Installation, the SCS will be installed on the local disk E:
beside the Central Instance. But it need to be on the shared Disk P:
beside the ASCS installation. How can I control this?
Stefan

obviously the network share saploc is existing in your system an pointing to a local device.
Delete the local saploc share, install SCS instance, run MSCS first node, additional node, create the local share saploc again (don't forget to set permissions on the share, the default permission did only allow Read vor Everyone) and proceed with installation.
There is a note in creation for this issue.
peter

MSCS cluster installation on win + sql server 2005

Dear Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisit & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarni
Message was edited by:
amol kulkarni

Hi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier

Installing MSCS cluster installation

HI Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisite & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarni

Hi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier

MSCS Cluster Installation

Hello Experts,
Can anybody help me configure the SAPGUI on the end user's system in a MSCS Cluster installation ?
I have Central Instance on Node 1 and Dialog Instance on Node 2 with SQL Server 2005 on Windows 2003 Enterprise Edition. The SQL and SAP cluster is working absolutely fine, but when there is a failover to Node 2, the user's connection to the server is getting disconnected
Please advice.
Edited by: The Fuhrer on Dec 18, 2008 5:45 AM

Hi kiran
use db2mscs.eee is the template and copy this to db2mscs.cfg.
and edit the file using page number 255.
Global section
DB2_INSTANCE = DB2<SID>
DB2_LOGON_USERNAME = domainname\db2<sid>
DB2_LOGON_PASSWORD = password
CLUSTER_NAME = clustername
MSCS Group for Node 0
GROUP_NAME = DB2 <DBSID> Group
DB2_NODE = 0
IP_NAME = DB2 IP <SID>
IP_ADDRESS=ipaddess of virtual db2 server
IP_SUBNET=subnet mask ipaddress
IP_NETWORK=Public LAN
NETNAME_NAME = DB2 NetName <SID>
NETNAME_VALUE = hostname of virtual db2 server
NETNAME_DEPENDENCY = DB2 IP <SID>
DISK_NAME = Disk L: these 3 are the shared disks
DISK_NAME = Disk M:
DISK_NAME = Disk N:
INSTPROF_DISK = Disk L:
#TARGET_DRVMAP_DISK = Disk M:
MSCS Group for Node 1
#GROUP_NAME = DB2 Node 1
#DB2_NODE = 1
#IP_NAME = IP Address for Node 1
IP_ADDRESS=9.26.118.252
IP_SUBNET=255.255.255.0
IP_NETWORK=Ethernet(2)
#NETNAME_NAME = Network Name for Node 1
NETNAME_VALUE = DB2SRV1
NETNAME_DEPENDENCY = IP Address for Node 1
#DISK_NAME = Disk O:
#TARGET_DRVMAP_DISK = Disk O:
please follow the isntallation doc it has given very clearly. page number 254.
if u need any further guidence i will.
Kiran have u finshed the installation
Regards
Rao .
Edited by: Rao on Jun 22, 2009 12:44 PM

Installing ERP2005 SR2 on MSSQL Server 2008?

Hi
Hoping all the experts here can help me.
We are creating a new system via system copy. Our source is ERP2005 SR2 on AIX/DB2 and our target is Windows 2008 Server and MSSQL Server 2008.
We have taken the export of the source db.
The installation kit we have for the target is part number 52023163 SAP ERP 2005 SR2 MSSQLSRV Windows.
I am confused as to the supported releases of the various components required to successfully create the new system.
The install kit has installation master DVD BS 2005 SR2 SAP Insatalltion Master (part 51033208) and bundled in the kit is MSSQL2005.
I have downloaded the SQL 2008 version and installed it via the script as instructed in the SAP guide. I started SAPinst and ran through various parameters. When I get to the option 'MS SQL Server --> Database Connection Information' I specify the server the database is sitting on, click next and get the following popup ' The MS SQL Server Version 10 is not supported for the installation of this product. Use appropriate MS SQL Server Version'
I am wondering if I am using the correct installation kit, and have got myself very confused searching around SAPnet. Notes 1152240 and 1076022 point towards certain restrictions when installing on SQL Server 2008. It asks what version of installation master and netweaver release I am on and I am not clear on this. Could anyone help here please, at least to confirm what versions I am on?
Thanks Gregory

Hi Markus
Thanks, even though our db source export is from ERP2005 SR2 I can still use the SR3 kit to install the target? Should the source and target releases not remain the same?
Or, do you mean just use the SR3 Installation Master rather than the whole kit?
Edited by: Gregory Goldsmith on Nov 17, 2009 2:51 PM

PI 7.1 Installation on MSCS Cluster

Hi Sapers,
                     I'm In the middle of Installation of PI 7.1 on MSCS Cluster
                     My Problem is while Installing In Node A I have chosen for Host Agent and SAPOSCOL a Shared Drive(G:) which
                     Should actually be a Local Drive(C , But In Node B I have Chosen Local Drive (C
                     Now My question
                     1) Can I change the path In the Registry, If yes can anyone tell me the procedure and
                      2) What would be the implications or Consequences?
                      3) Will My Installation Go Successfully
Thanks In Advance
GHK

Installation of SAPOSCOL on a different logical partion within the same local host is fine, obviously not on a different host as the SAPOSCOL is the operating system collector for the host on which it is installed.
Regards.

MSCS cluster + oracle + ERP2005 Sr2

Similar Messages

Maybe you are looking for