MSDS & Text Report UN38.3 for ipad

How can I find the MSDS & Text Report UN38.3 for ipad 1's which we need to ship as airfreight to UK

HI there. I found this article in the Apple's knowledge base: http://support.apple.com/kb/HT5423
iPad: Battery safety certifications.
This states that iPad batteries are compliant. Is that adequate?
Regards,
Dan

Similar Messages

Text formatting in Pages for iPad 2

I am trying to apply text formattting within a document in pages. It will not allow me to format text within a sentence to bold or italics for specific words. The fonts in question do have these formats as options, but pressing the corresponding format button does nothing. I can change the style to lists, etc.
Any help would be appreciated.
Neil

It is not built in, but you can at least create and edit footnotes (I do not use end notes, but from limited testing, it appears to work with endnotes as well but converts them to footnotes). It sounds complicated when you break it down into steps as I do below, but it really is easy and intuitive.
FIRST: The underlying concept. If you have the latest Pages for iPad, then when it imports a Word document it imports footnotes (and endnotes) and you can edit them.
With that in mind, here is how you can create footnotes on the iPad.
#1 In Word create a one short sentence shell text with a short footnote, like "See the cat run /fn1" "fn/1 The cat was black").
#2 Import that shell document into your iPad, say with email "open using Pages."
#3 Save that shell document as your sour dough starter so to speak.
#4 Now create your new Pages iPad document.
#5 When you are ready to create your FIRST new footnote, copy and paste the shell sentence with shell footnote from your saved starter shell document into your new iPages document.
#5. Edit the shell sentence and footnote to a real sentence and footnote in new document.
#6 Thereafter, as you add new footnotes, either copy / paste one from new document or shell and edit. You will see they renumber properly, even when moved.

Why doesn't the text boxes in Pages for iPad show the arrows to link the Boxes together?

Hi. I am using Pages, which I love, on my iPad.
As a perfectionist, I would like all my textboxes to be linked so that if I move one I can move them all.
Any suggestions?
When I tap on the boxes I don't have the arrows appear like you would on a Mac.

Yes sorry about that Rachel. I don't have an iPad so can't explore for the iOS options.
There is a separate Pages for iOS forum where they may be able to give practical assistance.
https://discussions.apple.com/community/app_store/iwork_for_ios
Peter

Text Wrapping in Pages for iPad

I have an iPad 2 and have started using Pages. I already have several lines of text and have inserted a normal rectangular image. I can't get the text to wrap around the image the way I would like. Currently, I can only get the text to go above and below the image. I would like the text to wrap around the sides as well. I have tapped on the information button and selected Wrap then changed it to "Around." No matter what different options I try, I can't get the text to wrap all the way around the image, only above and below.
Does anyone have any advice?
Thanks in advance!

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

Text wrapping on Pages for iPad

When viewing documents on Pages (version 2.2.1) on the iPad Air, I'm noticing that some multi-syllable words at the end of a line are being split with a hyphen (?Automatic hyphenation). If I view the same document on iCloud Pages on my Macbook, there is no hyphenation on the document, so I don't know why it is only happening on the iPad. I have searched high and low through settings to try and fix this, and I tried reloading the document from word, but same thing is still happening.
It is so offputting when I'm working on my documents! Any help is appreciated!
(I only noticed this today, so I wonder if it has just happened or if the app auto-updated without my knowing, and I don't know how to change it. Also - it's only on the couple of documents I used within the last couple of days, so this made me wonder if it is due to an app update??)

victoryhat wrote:
"Document can't be opened" or something like that.
When you create a document in iWork on the mac, a lot of formatting is lost when you save it to iCloud,
That is not true to my knowledge, as you can reopen the file from iCloud on the Mac without problem.
or you try to open it in iWork for iOS.
Again, where are you getting this from? My understanding is that formatting from OSX is retained but a degree of it can't be edited or created in iOS.
Sandro
Where are you? Generally you can get phone support depending how and when you bought either your device or software.
Yes unfortunately Apple periodically makes statements that are not true and has been held to account by the consumer authorities. It has happened here in Australia and the EEC has done the same. Unfortunately it is based in the USA where in recent times corporations have not been held to account.
Peter

Does anyone know how to do a text search in the new Safari for iPad iOS 7?

Does anyone know how to do a text search in the new Safari for iPad iOS 7?

The feature has been removed to make safari even less useable. You need to download a third party browser like atomic web browser to get the functionality you want back.
Like many new IOS 7 "features", safari on the ipad is a FAIL.
At least you can now bury safari in a folder containing hundreds of icons that you can only view 9 at a time.

How do you highlight text in Pages for iPad? The document I want to create and highlight is a pages document

I am trying to create a document in Pages for iPad and want to highlight various bits of text but can not find a function in the inspector for this. Can anyone help,please?

Hi stuartdj,
I'm not finding a way to highlight text as one can do with iBooks (hold and swipe for black text, background yellow for example).
One option is to actually color the text itself.
Select the text, then in Style tools, tap the Font name at the top which shows the Text Options sheet where there is a Color option. Would changing the font color to Red, Green or Purple accomplish your goals?
If you do want black text on a colored background (highlighted) it would need to be text in a text box where you can change the fill (background) color. Style, Style Options, Fill. But this is not inline text and doesn't flow like just coloring the font itself.
ivan

In Pages for iPad, I couldn't wrap text(Chinese characters) around the image

Hi, a question about Pages for iPad. I wrote some words with Chinese characters and then inserted a image from the Camera Roll. The problem is that I couldn't wrap words around the photo. I tried again wrote some words in English and it's ok for wrapping. Why did this happen?

From the help section in the Pages app ....
Anchor or free an object to or from its surrounding text:
Select the object, tap in the toolbar, and then tap Arrange.
In the Arrange window, tap Wrap.
To make an object move with the flow of text, slide “Move with Text” to ON.To make an object remain stationary, unaffected by changes in the surrounding text flow, slide “Move with Text” to OFF.
Drag the Extra Space slider to indicate how much space you want to leave between the object and the surrounding text.
Wrap text around an object:
Select the object and tap in the toolbar, and then tap Arrange.
In the Arrange window, tap Wrap.
Tap a wrap option to select it.Automatic optimizes text wrap for you, depending on the size and position of the object, and the width of the text column. Text wraps around an object, unless there’s very little space around the sides, in which case the text flows only above and below the object. Around lets you customize the text wrap around the sides, without automatic optimization. Above and Below allows text lines only above and below the object.
Drag the Extra Space slider to indicate how much space you want to leave between the object and the surrounding text.
This works for me. Restart your iPad if this does not work for you.

Cannot wrap text in pages for iPad mini after importing from Mac

Imported docs into pages for iPad from Mac. Now text will not wrap around pics on iPad. Any suggestions?

It's not possible to copy from the help file in Pages, but are you doing it this way? Following these instructions?

What is the best voice to text app for iPad Air?

I had the app Dragon (a voice to text app), on my iPhone and downloaded it to my iPad Air, but it's not working. Reading the "help" area it says something about ATT iPads don't support it. I have ATT.
But, I can open the app and it reads "Tap and dictate" as though all is fine and dandy and then after practically yelling into almost every part of the iPad (to no avail), it just says " Sorry message not recognized. Please try again."
Can anyone help me on this? Also is there a better/best dictation app for iPad?
Thanks, Joan

You can use text-to-speech in any app. I'm a big fan of the app Drafts as it allows two touch tranfer to any number of other applications, not unlike how I recall Dragon worked. If you don't want to spring for Drafts (though I can't recommend it highly enough!), you can always use the built in Notes app then copy and paste when you're done.
No, you can't see the words as you speak. However, you can always stop after a couple of sentences and review.
Best of luck.

Use dot matrix printers for printing text reports in Reports 10g

In Forms 6i, customers had the option to use dot matrix printers for printing text reports.
I believe, from 9i onwards, text based reports aren’t supported and instead HTML/PDF,DOC,RTF reports are supported which are not text based and use modern day printers.
Is it still possible to use text printers ??
Regards,
Noman

hi
check out the following link.
Re: Is printing to generic text printer and hand-coding the report possible?
http://download.oracle.com/docs/html/B10314_01/pbr_uxprt.htm#1005700
sarah

Text for ipad,windows and android

Hi
I'll publish a folio for ipad , windows and android.
If I have understood correctly, Is the best way to create an iPad version first and use the same folio to the other platforms.
I have made a folio of 1024x768 and has 16pt for body text. PDF format.
The problem is that the text is ugly in Android and Windows versions.
What should I do to get the best deal on the windows and android versions?
Regards
Ake

I have attached three screenshots.

EHS : Creating new report parameter/ symbol for MSDS cover sheet

Hi,
I am working on the SAP EHS module.
I have a requirement in which I need to have the country name (description) on the MSDS cover sheet instaed of the country key which is presently coming in there.
As per the standard settings, the report parameters available for the country point towards the country key only (char 3) i.e T005-land1 and not T005T-landx(char 15).
I understand that I need to create a new customer report parameter in the customising which will pick the data for the coversheet country.
My problem is that I am not sure where exactly do I have to write the code for this report symbol/parameter expansion.
I am not sure about the trigger for the expansion routine.
Please guide me if anyone has worked on this kind of an issue.
I will greatly appreciate your suggestions on this one.
Thanks and regards,
Hitanshu

Go to
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm">http://help.sap.com/saphelp_erp2004/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm</a>
Report Definition -> Report Creation: Process -> Document Template Layout Editing -> Editing Specification or Parameter Symbols -> Function Module

Where did the text justification feature in Pages for iPad Doc Setup go?

In previous versions of Pages for iPad ( pre iOS8) there used to be text justification option in document setup mode. In latest version, 2.4.2, the justification feature is missing for the headers and footer . There does not seem to be any way to center my text in the header.
Anyone have an idea?

Tom,
Thank you for the response, even if it confirmed my fears. I've had a go with the "Show Spelling and Grammar" and it is much less useful than the methods of 4.x
How dissapointing, as someone who regularly works with documents in multiple languages. What's worse: I cannot even open my old documents now in Pages 4.x once they have been opened by 5.0.
A mess, indeed.

How can I make a scrolling text in keynote for iPad?

I have a long text box I have typed on keynote for iPad 2 on iOS 5.1.1 and I am trying to get it to scroll so I can fit it on one slide... How? I have tried using moving in and moving out but it moves too fast for anyone to read.

Yes You can if you are updated with IOS5.
Here is the method...
1-Tap on "Photos" on home screen
2-Tap on camera roll (may be you are already in camera roll)
3-Look at top right, you will found one arrow point out of the rectangle, tap on that
4-It will show "Select Items" now select as many pictures you want to select...
5-Look at the top right corner, you will see "Add to" tap on that
6-Add new album
7-Enter the title for new Album
8-tap on save
9-you are done...

MSDS & Text Report UN38.3 for ipad

Similar Messages

Maybe you are looking for